Technical feature: Stable structure with high brazing speed(about 4.5-12 seconds needed per tooth) The electronic control system automatically from takes , changes, installs and welds, and the whole process takes 10-15 seconds. Changeover mainly by inputting data into the machine control Both sides cylinders automatically fixed saw blades to improve precision. The high frequency heating system and Ceia induction heating system control the temperature automatically. The accuracy of controlled temperature is �±1â?? to ensure brazing strength and heating stability. Automatic teeth selection, feeding, dosing, silver solder foil cutting and folding just through one-stage processing. Suitable for mass production, one person can control 12 equipment at the same time Technical description: Sorting and feeding of the carbide tips through the automatic feeder and conveyor belt. Dosing of the flux onto the carbide tips. Cutting of the silver wire or soldering platelets from a coil and stamping onto the carbide tips. Dosing of the flux onto the silver welding wire or silver brazing foil. Transferring the prepared carbide carbide tips into the ceramic-equipped and water-cooled soldering tongs. Brazing of the carbide tips onto the saw blade. Loading and unloading of the unbrazed and brazed saw blades automatically by robot system. Technical data: Diameter of saw blades 100mm-400mm Rake angle -5 +25 Carbide tips width: 1.5mm 11.5mm Brazing accuracy: 0.05mm Thickness of saw blades: 1.0mm 5.0mm Speed of brazing : 4.5 12s/per tooth General power: 6.0kw The width of silver solder foil: 1.5mm 5.0mm Water pressure : 3KG Air pressure: 5KG Electricity: 220 V single phase 50 Hz (wire bigger than 6mm2) Weight: 500KG Dimension : 1600mm *1200mm *1700mm Time of change blades 8 15s/pcs
44.MODEL:DL- BTST Textile Sweater Button Push Adhesion Pull Tensile Strength Button Push & Pull Tensile Strength button tensile strength dynamometer Standard configuration: 1. Tension seat 2. Pushing and pulling force gauge 3. Two jaw pliers 4. Three jaw pliers 5. Tension pliers 6. Bottom fabric fixture 7. Male button fixture 8. Mother button clamp Size: 280 * 220 * 777mm Button tensile testing machine Button strength machine: The purpose of this test is to define the responsibility of garment manufacturers to ensure that buttons, buttons, and fasteners are properly secured to the garment, preventing buttons from detaching from the garment and posing a risk of swallowing by infants. Therefore, all buttons, buttons, and fasteners on ready-made clothing must be tested by a button strength tester. This function performs uniform and vertical tensile testing on various buttons on clothing to check whether their firmness meets relevant safety standards Standard: 16CFR1500.51-53, ASTM PS79-96 Operating instructions: 1. Install the fixture, cooperate with the test button, and lock the test sample onto the base tightly 2. Put down the fixture, grip the buttons tightly and pull them upwards. Each group of buttons should be able to withstand a minimum of 17 pounds of tension (7.72kg) and maintain it for 10 seconds without any signs of looseness or damage. At least 20 buttons per model need to be tested simultaneously to be considered qualified If one of the buttons is loose or damaged, or if it is replaced, it is necessary to retest all of them
Hoang Minh Chau Company(Address : Tan Hung, Chi Tan, Khoai Chau, Hung Yen) has nearly 20 years of experience in the cultivation and production of turmeric . The company specializes in official export to the most demanding markets in the world such as: Japan, Italy, Germany, USA, India, Eastern Europe... The biggest advantage is being located in the largest turmeric raw material area of Vietnam. ï?¶ The turmeric raw material area of Hoang Minh Chau Co., Ltd., which is protected by the State, has been implementing the process of growing and developing turmeric according to GlobalGAP standards in order to improve the productivity of turmeric, open many export markets to the world. WHY SHOULD YOU CHOOSE TO BUY TURMERIC PRODUCTS OF HOANG MINH CHAU COMPANY : 1. TURMERIC IS GROW AND STRICTLY CONTROLLED: Keep a farming diary on each turmeric field ð??? Only use standard varieties and benign microbial organic fertilizers ð??? No residue of pesticides ð??? Have clear product traceability 2. SPECIFICATION *ITEM* *STANDARD* 1>Type : Turmeric powder 2>Origin : Hung Yen, Viet Nam 3>Brand Name : Hoang Minh Chau Co., Ltd 4>Color : Orange yellow 5>Features : Delicious, nutritious, healthy 6>Curcumin : Over 5 - 6 % 7>Application : Health Food, food additive, medicine, cosmetic 8>E-coli : Absent 9>Salmonella : Absent 10>Certificate : GlobalGAP, ISO 22000:2005(United Kingdom), four-star OCOP... 11>Supply Ability : Over 50 Tons per Month 12>Packing : PE + carton 10kg, 15kg; PE + PP 20kg, 25kg,...or according to customer's request. 13>Labelling : In accordance with the rules and regulations applying to buying country 14>Shelf Life : 24 Months 15>Storage : In cool and dry places. We wish to become a supplier of high quality products with competitive prices for partner companies to develop strongly in International Market. If you have any queries, questions or need further information, please donâ??t hesitate to let me know & contact us as bellow :
3.Technical Parameter: Model and specification :DL9930 Drop height: 10-1500mm, any setting Steel ball weights :55g, 64g, 110g, 225g, 535g (optional upon request) The maximum size of the test piece is :400 * 350mm Height display method: Graduated scale display (electrically selectable with LCD or touch screen control display) Drop height error :â?¤ �± 2mm Drop method: electromagnetic adsorption drop Control and lifting methods: Electric control electromagnet, manual lifting of electromagnet fixing rod (electric lifting using motor) Protective cage :around the protective device Sample fixation method: fixture clamping and fixation Drop bottom plate size :500 * 400 * 10mm Overall dimensions of the testing machine :500 * 400 * 1800mm Control box overall size :300 �? 370�? 1060mm Motor power: 0.4KW (electric) The net weight of the equipment is :approximately 40kg Power supply:AC220V/50Hz 5.Configuration List 1. Main purpose: The falling ball impact testing machine is suitable for testing the impact strength of plastic, ceramics, acrylic, glass, lenses, hardware and other products. 2.Product features: DC electromagnetic control mode is adopted to place the steel ball under the electromagnetic chuck and the steel ball is automatically sucked up. Press the drop key, the magnet releases the steel ball instantly, and the steel ball will conduct Free fall test to accurately impact the surface of the test piece; The drop height can be adjusted up and down, and there is a height scale attached (the electric series can directly display the test height) to determine the drop height of the component. Equipped with a laser positioning device, the impact testing position can be accurately aligned with the laser, resulting in more accurate testing results. Compliant with standards Test standards: JIS R3205:1989, ISO/DIS125421 12543-6:1997 AS/NZS2208:1996, GB/T9962-1999.
3. Main technical parameters 3.1. Y-axis movement range: 130mm 3.2. X-axis movement range: 150mm 3.3. Spacing between two marking columns: 270mm 3.4. XY axis drive method: electric drive 3.5. Z-axis click method: motor driven 3.6. Click power: 500gf or customize weights according to customer requirements. 3.7. Striking force: 500gf or customized weights according to customer requirements. 3.8 Click speed: 10-100 times/minute 3.9. Scratch speed: 30-2000mm/min 3.10. XY torque: 8.0Nm 3.11 Testing station (linkage): 2 3.12 Control functions: A. Digitally set running speed (X/Y/Z axis) B. Digitally set running displacement (X/Y axis) C. Counting value display setting: 0~999999, any setting, power off memory D. Line drawing method: long (square), straight line. 3.13. Shutdown method: automatic shutdown by counting values 3.14. Working voltage: 220VAC 50HZ 3A 3.15. W780 * D570 * H520mm 2ã?? Instrument Introduction 2.1 Product Usage Click marking tester is a special testing device for small consumer electronic products such as e-books, tablet computers, mobile phones, walkie-talkies and Electronic dictionary. It mainly performs durability tests on hand written screens and touch screens, such as grid drawing, clicking, and rubbing. 2.2 Equipment characteristics Using PLC control, simply select a starting point on the screen of the product to be tested, and then set the testing stroke in the device to run. This machine can perform four modes of testing: X-line, Y-axis line, XY axis square or rectangular, and Z-axis click. And it uses a stepper motor combined with a ball screw as the motion mechanism, with accurate positioning, high accuracy, and low noise; Long lasting and durable.
Model: DL3020, Stroke mm: 300 * 200 * 200, Boundary dimension mm: 625 * 777 * 1080, Workbench mm: 460 * 360, Total weight (kg): 280KG, Glass bearing capacity (kg): 15, Z-axis lifting distance: 200MM, Working distance: 90 mm, Measurement accuracy UM: XY (3+L/200) um, Resolution of grating ruler: 1um, CCD resolution industrial grade: 800 line high-definition, Zoom objective magnification: 0.7-4.5X, Total magnification: 20-180 times, optional 20-220 times, Object field of view: 7-1.1MM, Surface light and contour light of the light source: white LED, with continuously adjustable brightness, Power supply: 220V �± 10%, 50 Hz. Electrical equipment requires reliable grounding: the grounding resistance is less than 4 ohms, Working environment: temperature 20 â??�± 5 â??, temperature change ï¼? 2 â??/hr, humidity 30-80%, vibration ï¼? 0.002g and lower than 15Hz, Imager characteristics: Utilize optical principles for non-contact measurement; Suitable for all fields with the purpose of two-dimensional measurement; It is the best measurement solution for small, thin, soft, and component parts; Accurate measurement can be achieved for elements such as points, lines, circles, angles, etc; And it has powerful report output function, high-quality, economical, and practical; Ultra high cost-effectiveness with all functions of flat measurement. imager: measure all plane dimensions; Hardware, main features: Fully cast aluminum worktable, column combination lightweight body. Precision transmission equipment design for fast movement. Precision P-level linear guide rail and V-shaped guide rail, with extremely high straightness, Ensure machine accuracy and service life. Sony Color CCD from Japan, with higher definition measurement images. Flexible lighting with contour light, surface light, and coaxial light (optional), high clarity, and unparalleled measurement accuracy. High precision optical ruler, every 1 micron is crucial.
Machine features: The function of automatically install and unload of blades, suitable for precision cutting board saw, electronic cutting saw, aluminum alloy saw blade, multi-blade saw and other series of saw blades. One person can operate more than 10 machines at the same time, greatly save labor cost. Silver solder bending unit continuously variablely programmable in all dimensions. Three groups of rails are adopted for the transmission of tungsten carbide tooth , which improves the running accuracy and service life of rails. Industrial PC with 10inch touch screen system with both language and logo for parameter setting, easy set-up and operation. Automatic teeth selection, feeding, dosing, silver solder foil cutting and folding just through one-stage processing. Welding the tip onto the circular saw blade by control the temperature so that the temperature controlled brazing and annealing cycle allows brazing joints perfectly. Automatically pick up of the brazed circular saw blade and placing it onto the upper pin of the loading magazine in ergonomic control position for the operator . Technical data: Diameter of saw blades:120mm~500mm Rake angle:-5~+25 Tip width: 1.5mm~6mm Brazing accuracy: 0.05mm Thickness of saw blades: 1.0mm~5.0mm Speed of brazing : 6~13s/per tooth General power: 6.0kw The width of silver solder foil: 1.5mm~6mm Diameter of silver wire : 0.5mm Water pressure : 3KG Air pressure: 5KG Electricity: 220 V single phase 50 Hz (wire bigger than 6mm2) Gross Weight: 800KG Dimension : 1600mm *1200mm *1700mm Time of change blades:15~20s/pcs Options: Camera inspection system Ceia induction heating system
1.product description The chicken egg peeling machine is a special equipment for peeling hard cooked chicken eggs, suitable for egg processing users. This egg peeling machine adopts rubber rollers and strong water impact, which greatly reduces egg damage rate. Its structure is very exquisite, imitating the artificial rubbing of eggs, the effect is best. The peeling rate can reach 98.5%, and the final peeled eggs are smooth and beautiful. 2.Features: 1. The egg peeling machine imitates the artificial rubbing eggs, it is easy to peel off the egg shell. 2. It has the best peeling effect and will not damage the egg surface. The peeled eggs are smooth and beautiful. 3. The machine is made of full 304 stainless steel, durable and hygeian, easy to clean. 4. This egg peeling machine includes feeding, shelling, peeling and discharge, automatic operation, save labor. 5. It adopts rubber rollers and strong water impact, which greatly reduces egg damage rate. 6. Large capacity,5k, 8 k and 10 k eggs/hour are available, suitable for food factory, restaurant, etc. 7. Water circulating tank, save water and cost. 3.Characteristic 1.Special machine for shelling egg , high efficiency, low breakage rate. 2.Fully made of 304 stainless steel, comply to hygienic standard. 3.Adopt water recycling system, energy saving. 4.More than 98% peeling rate, 0.2% damage rate. 5.Special design , compact structure , smooth surface, no scuffing on eggs. 6.Suitable for manufactures of boiled egg, spiced corned eggs, iron egg and red painted egg products . 4.Working flow of Chicken egg peeling machine Put all the boiled eggs in the water feeding tank for cooling; Conveying cooled eggs automatically into shell cracking part; Shelling part: break eggshell without damage the eggs; Peeling part: Remove the cracked shell under water shower and imported latex tubing; Collecting conveyor will collect the peeled eggs and pick up the bad ones.
(bataviadropship) FRAME Crux FACT 10r Carbon, Rider First Engineeredâ?¢, Threaded BB, 12x142mm thru-axle, flat-mount disc FORK S-Works FACT Carbon, 12x100mm thru-axle, flat-mount disc HANDLEBARS Specialized Adventure Gear, 118.9mm drop x 70mm reach x 12�º flare STEM Specialized Pro SL, alloy, 4-bolt, 6-degree rise TAPE Supacaz Super Sticky Kush SADDLE Body Geometry Power Expert, titanium rails SEATPOST Roval Terra Carbon Seat Post, 20mm Offset SEAT BINDER Specialized Alloy, 30mm HANDLEBARS Specialized Adventure Gear, 118.9mm drop x 70mm reach x 12�º flare STEM Specialized Pro SL, alloy, 4-bolt, 6-degree rise TAPE Supacaz Super Sticky Kush SADDLE Body Geometry Power Expert, titanium rails SEATPOST Roval Terra Carbon Seat Post, 20mm Offset SEAT BINDER Specialized Alloy, 30mm SHIFT LEVERS SRAM Rival eTap AXS REAR DERAILLEUR SRAM Rival XPLR eTap AXS CASSETTE SRAM XPLR, XG-1251, 12-speed, 10-44t CRANKSET SRAM Rival 1x CHAINRINGS 40T BOTTOM BRACKET SRAM DUB BSA CHAIN SRAM Rival 12-speed FRONT WHEEL Roval Terra C REAR WHEEL Roval Terra C FRONT TIRE Pathfinder Pro 2BR, Tan Sidewall, 700�?38 REAR TIRE Pathfinder Pro 2BR, Tan Sidewall, 700�?38 INNER TUBES Presta valve, 48mm
Description Multijet Ampoule & Vial Washing Machine is a simple, compact, versatile and a reliable ampoule & vial Washing machine, with the latest GMP demand. The machine is enclosed in stainless steel construction with flexibility to wash 1ml to 25ml ampoules and 2ml to 100ml glass vials with the help of suitable change parts. The standard unit is having mechanical motorized cam operated valve system for observing total six washing in one cycle. Alternatively timer operated solenoid valve system or microprocessor controlled timer sequences can be in-corporate upon specific customer request. Multijet Ampoule & Vial Washing Machine is widely use in medium & small scale injectable organizations. Salient Features : Positive & pressurized jets through washing needle for pressure cleaning at minimum usages for washing media. Sound design concept of pressure tank for reverses & continuous supply of washes Medias. Both internal & external washing ensuring absolutely & continuous ampoule / vial after sequential washing. Acrylic top cover for clear view of washing events taking place in the machine On-line poly carbonates housing with P.P. replaceable filter cartridge of 5 OR 10 micron of water for best possible washing. All contact parts of washing media are of S.S. In the event of acrylic cover lifted during cycle operation, the machine will automatically stop and re-start from the point when cover is pushed down. Process Operation The dump loading procedure may be used, if ampoules/vials are received in ready to dump boxes, which will have exactly into the same number of ampoule/vial and the pitch, as loading tray. Alternatively, each ampoule/vial has to be arranged into the tray. The loading tray/s is placed directly into the machine & the handle bar is lowered for ampoule/vial for automatic centering of washing needles into the ampoule/vial mouths. The top cover is also lowered & switch is operated for automatic sequent
Overview Quick Details Type potjie pot Pans Type cast iron potjie pot Metal Type CAST IRON Surface treatment preseason oil Brand Name Shengri or customized Place of Origin Hebei, China (Mainland) Model Number SR301-312 Product Description Cast Iron Pot With Legs are great for outdoor cooking situation and having some good food. The Outdoor Cast Iron Pot With Legs can make anything from delicious stews to potjies and even fireside bread. Made from cast iron for even heat distribution, ideal for low-and slow cooks. Equipped with 3 cast iron legs and a well fitted lid. Specification Item number SR301 SR302 SR303 Weight(kg) 1.7kg 3kg 5kg Size(cm) 11cm*10.5cm 13.5cm*14.8cm 20cm*20.5cm Volume (L) 0.8L 1.2L 3L Item number SR304 SR305 SR306 Weight(kg) 8.5kg 9.5kg 14.5kg Size(cm) 23.5cm*24.5cm 26cm*27cm 29.5cm*30.5cm Volume (L) 6L 7.8L 9.3L Item number SR307 SR308 SR309 Weight(kg) 18kg 22kg 31kg Size(cm) 31.5cm*35cm 35cm*39cm 38.5cm*40cm Volume (L) 13.5L 18.5L 30L Item number SR3-10 SR3-11 SR3-09 Weight(kg) 35.5kg 50kgs 60kg Size(cm) 40.5cm*41cm 47cm*49cm 52cm*53cm Volume (L) 35L 58L 74.5L Heat Source: Suitable for cooking on gas, outdoor campfire, as well as in the oven Package: Plastic film,wooden pallet
Overview Quick Details Type potjie pot Pans Type cast iron potjie pot Metal Type CAST IRON Surface treatment preseason oil Brand Name Shengri or customized Place of Origin Hebei, China (Mainland) Model Number SR301-312 Product Description Cast Iron Pot With Legs are great for outdoor cooking situation and having some good food. The Outdoor Cast Iron Pot With Legs can make anything from delicious stews to potjies and even fireside bread. Made from cast iron for even heat distribution, ideal for low-and slow cooks. Equipped with 3 cast iron legs and a well fitted lid. Specification Item number SR301 SR302 SR303 Weight(kg) 1.7kg 3kg 5kg Size(cm) 11cm*10.5cm 13.5cm*14.8cm 20cm*20.5cm Volume (L) 0.8L 1.2L 3L Item number SR304 SR305 SR306 Weight(kg) 8.5kg 9.5kg 14.5kg Size(cm) 23.5cm*24.5cm 26cm*27cm 29.5cm*30.5cm Volume (L) 6L 7.8L 9.3L Item number SR307 SR308 SR309 Weight(kg) 18kg 22kg 31kg Size(cm) 31.5cm*35cm 35cm*39cm 38.5cm*40cm Volume (L) 13.5L 18.5L 30L Item number SR3-10 SR3-11 SR3-09 Weight(kg) 35.5kg 50kgs 60kg Size(cm) 40.5cm*41cm 47cm*49cm 52cm*53cm Volume (L) 35L 58L 74.5L Heat Source: Suitable for cooking on gas, outdoor campfire, as well as in the oven Package: Plastic film,wooden pallet
Information Overview Type Cast Iron Dutch Ovens With Legs Metal Type Cast Iron Surface Finish Pre-Seasoned oil coating Color Black Brand Name Shengri or customized Certification EU, FDA, LFGB Place of Origin Hebei, China (Mainland) Shipping delivery port Xingang, Tianjin Delivery date About 45 days after 30% T/T deposit paid Model Number SRKD-001/002/003/004 Product Description Specification Item number SRKD-001 SRKD-002 SRKD-003 SRKD-004 Weight(kg) 4.5 7 9 11 Size(cm) D:8" H:11.5/15.5 D:10" H:13.5/18.5 D:12" H:16/21.5 D:35cm H:17cm (pot onlyï¼? Capacity 2QT 4QT 6QT 10QT inner box size (cm) 21.5*21.5*13.5 27*27.5*18 32*32*24.5 / Packing Size(cm) 23*23*28 55.5*29.5*20.5 33*33*50.5 35.5*35.5*25 Qty/ctn(pcs) 2 2 (11.44/13.5) 2 1 Qty/20'(pcs) 3780 2238 1018 880 Optional Accessories: pot lid lifter, trivet, carry bag Applicable Range: open fire Package: Customized inner box and outer carton
We are manufacturing shapes of cubes, flats, pipes, fingers, rounds, pillows, and hexagonal. Size may vary from 18 to 50 mm. It is better to choose charcoal shapes according to the customerâ??s request. The main parameter to choose is ash content â?? how much ash is left after charcoal briquettes are burned down. Less ash is better. We are manufacturing briquettes with ash content of 1.8 â?? 2.2%; 2.2 â?? 2.5%; 2.5 â?? 3.0% and 3.0 and up. The most common ash content is 2.2 to 2.5%. There are a lot of variants to choose from. The basic is an inner box (brand box) of 1 to 5 kg packed inside the master box (10 or 20 kg). The inner box can be made with laminating (glossy or doff), with embossing or gold/silver plating. Mostly inner box is made in full color. The master box can be done in full color or black and white only. It is recommended to use a double wall. It is slightly more expensive than a single wall but makes a box much stronger. Forth step is to confirm your payment details and manufacturing schedule. Keep in mind that production can take up to 2 weeks. Plus we need time of 3 days to pack and staff the container. We provide invoices with specification details. By request, we can sign an additional export contract for you to comply with your country requirements
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature) (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 5% 95% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25 C, 3000 cycles (80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45 C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature(%) 3%/month, 25 C 17 High temperature self-discharge rate (%) 5%/month, 45 C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2) 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 595% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25°C, 3000 cycles 80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45°C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature 3%/month, 25°C 17 High temperature self-discharge rate 5%/month, 45°C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V discharged at 0.2C constant current to 2.5V at -20±2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
Composition of Brucite Brucite is natural magnesium hydroxide, also known as hydrated magnesia. Melting point (dehydration) 340 C, relative density: 2.39, hardness: 2.5, crystal structure: six crystal systems, relative molecular mass: 58.32, solubility: 0.009 g / L. Brucite has a simple chemical composition and its molecular formula is Mg(OH)2. Brucite is a rare high-magnesium mineral in nature. Its theoretical chemical composition is MgO 69.12% and H2O 30.55%. It is often found in brucites produced in nature. Impurities such as Fe, Mn, Zn, Ni, etc., these impurities exist as a homogeneous image, forming a series of continuous or discontinuous solid solution, constituent endmembers: iron brucite (including FeO 10%), manganese brucite (containing MnO 18%), zinc brucite (including ZnO 4%), nickel brucite (including NiO 2.5%). The associated minerals of brucite are serpentine, calcite, dolomite, magnesite, magnesium silicate mineral, periclase, diopside and talc. Use of brucite Brucite is an industrial mineral with special value due to its high content of useful components, low content of harmful impurities, and its unique physicochemical properties, which are different from other types of magnesium-containing mineral raw materials. The main uses of brucite is as below: 1.Flame retardant additives in rubber, plastic and fiber 2.� Flue gas desulfurization 3.Aluminum composite panel 4.Paper industry 5.Agriculture and fertilizer uses 6.Environmental protection field (Wastewater treatment) 7.Magnesia high temperature refractory 8.Fireproof coating 9.Neutralize the treatment agent and adjust the pH value
Baby Diaper Nonwovens Fabrics, No Smell Non Woven Fabrics, Breathable Nonwoven Fabrics Manufacturer. REASONS TO CHOOSE NONWOVENS FOR BABY DIAPER: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
Sanitary Napkin Nonwovens Fabrics, PP Spun Bonded Non Woven Fabrics, SSS Non Woven Fabrics Manufacturer. REASONS TO CHOOSE NONWOVENS FOR SANITARY NAPKIN: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
Diaper Non Woven Fabric, Pet Pads Non Wovens Fabrics, Pet Pads Spunbond Non Woven Fabric Manufacturer. REASONS TO CHOOSE NONWOVENS FOR PET PADS: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
