En590, d6, d2, jet a1, jp54, lng, lpg, lco, petcoke, mazut, bitumen, automotive gas oil(ago), base oil, export blend crude(espo), gasoline, diesel ultra low sulphur, urea, rebco .Export, cif aswp, tto, fob and tank to vessel basis
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
We are a key manufacturer of Titanium (Ti) materials, Nickel (Ni) materials and pressure vessels.We produce titanium ingots of ASTM B 381 Gr1, Gr2, Gr5 and our company was established in 2018, and it is specializing in the manufacture of Ti and Ni materials, its core business is: Non-ferrous metal materials clad metal materials and pressure vessels. First, Non-ferrous metal materials: Tiplates/tubes/bars/wires/ mesh, Ni plates/tubes/bars/ wires and Ti/Ni standard components. Second, Clad metal materials: Ti/steel clad plates, Ni/steel clad plates, Steel/steel clad plates, Al/Cu clad plates, and Al/SS clad plates. Third, Ti and Ni pressure vessels: Ti, Ni reaction kettle, tube heat exchanger, plate heat exchanger, etc. Our company has been ISO 9001-2000 certified. This company is qualified with the ability of manufacturing the D2 rate pressure vessels.
Fenton advanced oxidation technology is widely used in the treatment of refractory organic wastewater. Because it produces strong oxidizing OH (hydroxyl radical), which can rapidly oxidize and decompose the complex organic pollutant molecules, so its application is wide. The efficiency of Fenton oxidation mainly depends on the yield of �·OH (hydroxyl radical). The more and higher concentration, the higher removal rate of organic pollutants. According to the theory of free radical pairs,free radicals are always emerge in pairs.In some cases free radicals recombine,which reduces OH and reduces reaction efficiency. The recombination can only occur between "singlet state" free radical pairs.When there is no "singlet state" free radical that it cannot recombine,free radical reaction can only performed outside the cage. With the effect of an external magnetic field, the probability of the single state form is less,and the radical pair recombination is less. This facilitates higher reaction efficiency. We modified Fenton reagent technology by using the reaction in a certain strength magnetic field. 1. Reaction rate is doubled.Magnetized Fenton reagent advanced oxidation technology emerges higher rate .OH.The reaction is faster,HRT is shorter,and equipment footprint is smaller. 2. Higher COD removal rate.Magnetic Fenton reaction has 10% more COD removal rate. 3. Less chemical consumption.Magnetic field can reduce the recombination of free radicals,which indirectly reduces chemical consumption. 4. After sewage is magnetized, the physical and chemical properties will change to a certain extent,such as pH,viscosity,diffusion coefficient, surface tension,electrical conductivity, etc., which can affect the process of dissolution, crystallization, polymerization, wetting,agglomeration, solidification, and precipitation. And the metabolic processes of biological systems also have effect.Magnetic field also has an obvious memory effect on water.It changes the physical and chemical properties of the sewage and weakens the cage effect of the solution, which facilitates the out-of-cage reaction reduces the probability of recombination of free radicals, and also facilitates the smooth progress of the reaction.
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing Covered by pe then packed by carton
Titanium Anodes for Wastewater Treatment Electrolysis methods utilizing titanium anodes for wastewater treatment include electrochemical oxidation, reduction, flotation, and coagulation. Electrodes are arranged to minimize power consumption and allow easy maintenance. Two types of cells exist: unipolar and bipolar. Electrolysis involves direct and indirect methods. In direct electrolysis, oxidation and reduction occur at anode and cathode, respectively. Indirect electrolysis employs electrode-generated products for chemical reactions, effectively removing harmful substances, benefiting COD, ammonia, and color removal. This approach treats diverse industrial wastewaters, with advantages including minimal secondary pollution, controllable reaction conditions, and compatibility with various treatments. Titanium Anodes for Wastewater Treatment Principle The principle of electrolysis method for treating industrial wastewater: Titanium anode electrolysis method is used to treat wastewater, which can be divided into electrochemical oxidation, electrochemical reduction, electric flotation, electrocoagulation, and other methods based on the removal object and the generated electrochemical effect.
What Is A Huber Needle? The yellow huber needle are made up of a protective cap, needle hub, needle tube, tubing, injection site, robert clamp and so on. The huber needles for sale aim to be used to feed medicine to the device implanted in the patient's hypoderm. Kohope offers different Huber Needles For Sale Details Main material of huber needles: PP, PC, PVC, SUS304 stainless Steel Cannula, Silicone oil. Characteristic of huber needles for sale: Non-Latex Non-coring 90 degrees SUS304 stainless steel needle A rotating wing supplies less stress on both the tissue and the port Occlusion clamp Other Notes Of Huber Needles Product Conformance Of Huber Needles: In compliance with European Medical Device Directive 93/42/EEC(CE Class: lla) Quality Assurance Of Huber Needles For Sale: The manufacturing process is in compliance with ISO 13485 and ISO 9001 Quality System. Pain Management With Huber Needles Pain management with Huber needles involves the use of specialized needles to administer medications directly into the bloodstream through a subcutaneous port or implanted infusion pump. These needles are designed to penetrate the septum of the port or reservoir without damaging it, allowing for the administration of medication directly into the bloodstream. The� huber needles for sale is commonly used in pain management for patients who require frequent or continuous administration of medication. It can be used to deliver a variety of medications, including opioids and local anesthetics, directly into the bloodstream. This allows for targeted pain relief and may be a more effective method of pain management than oral medications. Pain management with Huber needles requires careful consideration and monitoring by a healthcare provider. Proper procedures for inserting and removing Huber needles must be followed to minimize the risk of complications, such as infection or damage to the port or reservoir. Patients should also be monitored for any adverse reactions or complications related to the use of Huber needles. If you mean to� buy huber needles in bulk, Kohope is a great option for you. For more information about huber needle cost and huber needle sizes, please feel free to contact us! We can also provide kinds of medical disposable products wholesale for sale, if you are interested, please contact us.
Product Ddescription Product name -D-xylose CAS:58-86-6 MF:C5H10O5 D-Xylose is a kind of five carbon sugar which is hydrolyzed from hemicellulose rich plants such as sawdust, rice straw and corncob. It is soluble in hot ethanol and pyrimidine, and its sweetness is 67% of sucrose. D-Xylose is similar to glucose in chemical properties and can be reduced to corresponding alcohols, such as xylitol, or oxidized to 3-hydroxy-glutaric acid. Application 1.No calorie sweetener. It is used in obese and diabetic patients. It is also used to prevent fat oxidation, raw materials for making soy sauce and spices for making pork through Maillard reaction. 2.Xylose has a high proliferative effect on bifidobacteria in human intestinal tract. Eating xylose can improve the microbial environment of human body. Improve the immune ability of the body. 3.It is used to make xylitol 4.It can be used in perfume and pet feed industry because of its obvious taste improving effect 5.Because it can cause Maillard reaction efficiently, it can be used to produce food seasoning 6.Because of its obvious effect, it can be used to color golden brown in food industry, such as butter and bread.
Application Benchtop temperature chamber can meet certain quality standards and testing specifications ,for example: Daily necessities, cosmetics, electronic components, and medical products .� Most ideal designed for temperature and humidity testing of small samples and specimens used for research, development and quality control.� This dimension are very cute. customer can fit on a personal desk is the most consideration.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com Feature: Our JOEO Benchtop Temperature Chamber's window is equipped with an anti-sweat electric heater device to prevent water vapor from condensing and water droplets, and high-brightness PL fluorescent lamps keep the interior of the box illuminated;Rectangular multi-layer glass viewing window, which can be used to observe the test items during the test.� With automatic-water supply system, it is convenient to supplement the water supply of the humidification barrel, and it can be recycled and used automatically. High-quality appearance, the body adopts an arc shape, the surface is treated with matte stripes, and the flat non-reaction handle is adopted, which is easy to operate, safe, and reliable. High quality original compressor circulation system adopts the French â??Tecumsehâ??& Germany "Bitzer" brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube, and the whole series adopts environmentally friendly refrigerants (R23, R404, R507). Double-layer insulation of ess chamber door is tight and airtight, which can effectively isolate internal temperature leakage.� Built-in moving pulley is easy to move and place and has a strong positioning screw to fix the position. Controller has multi-segment program editing and temperature, and humidity can do fast (OUICK) or slope (SLOP) control. Self-developing controller system adopts an imported LCD screen, which can display the measured value, set value, and time at the same time. Announcements: Do not place the sample in the oven heating state, and place the sample in the state of ensuring that the heating is off;� When placing the sample, there should be a certain space around the upper and lower parts to keep the air flow in the box smooth; There is a cooling plate on the heating wire at the bottom of the chamber, and the sample can not be placed on it, so as not to affect the heat flow and lead to heat accumulation; If the sample will have a phase change at high temperature, it must be packed in a tray to avoid contaminating other samples (for example, it will leak oil or change from solid to liquid after heating); Containing flammable and explosive organic volatile solvents or auxiliaries shall not be put into the chamber.
Our brewery systems are designed specially to meet unique and diverse brewing requirements. Whether small, middle or larger brewery you are going to build, our experienced and knowledgeable engineering team will create the most suitable solution, and make it come true by our quality craftsmanship. Configuration 2 vessel: Mash tun(M.T.)/Lauter tun(L.T.)+Kettle/Whirlpool(WHP) 3 vessel: Mash tun(M.T.)+Lauter tun (L.T.)+Kettle/Whirlpool(WHP) 4 vessel: Mash tun(M.T.)+Lauter tun (L.T.)+Kettle+Whirlpool(WHP) Hot Liquor Tank (HLT) Plate heat exchanger, 1 wort pump, for bigger brewhouse 1 additional HLT pump is necessary Controlling panel Integrated processing piping with valves&tri clamps for wort and hot liquor, CIP water. Platform with wort-checking table and stairway. PRT microbrewery system features Cost effective, Easy to operate, Save energy consumption.
ASTM B338/ ASME SB 338 Titanium Tube (Ti Tube) has a superior strength-to-weight ratio and corrosion resistance is one of the common titanium products. We generally divide ASTM B338/ ASME SB338 Titanium tubes into two types, one is called the seamless titanium tube, and the other is called the welded titanium tube. ASTM 338 TITANIUM ALLOY STEEL TUBE PROVIDED BY YUHONG ASTM B338/ ASME SB338 TItanium Alloy Steel Tube YUHONG GROUP provides the best ASTM B338/ ASME SB338 Titanium Alloy Steel Tube including straight tube, U tube for heat exchanger, boiler, and superheater. GR.1 TItanium Alloy Steel Tube GR.2 TItanium Alloy Steel Tube ASTM B338/ ASME SB338 TITANIUM ALLOY STEEL TUBE FEATURES ASTM B338 / ASME SB338 Titanium Tube Grade 7 UNS R52400 Alloy Steel Seamless Tube Titanium grade 7 is a corrosion-resistant alpha titanium alloy with similar mechanical properties to the commercially pure grades. There are 28 grades of titanium and titanium alloys for tubing purposes, among which Titanium Grade 2, Grade 7, and Grade 12 are most often seen in tubing applications. ASME SB-338 is the standard specification for seamless and welded titanium and titanium alloy tubes or tubing which are intended for surface condensers, evaporators, and heat exchangers. ASME SB-338 has a small palladium addition to improving corrosion resistance, particularly in mineral acids and strong brines. ASTM B338/ASME SB338 TUBING APPLICATIONS Chlorination systems Flue gas scrubbers Outlet ducting and stack liners for power plants, pulp and paper bleach plants, sulfur dioxide scrubbers, and weld overlay of less corrosion resistant metals Acid production and pickling systems Pharmaceutical industries use alloy fittings and tubing to avoid contamination caused by corrosion related failures Cellophane manufacturing Chlorination systems Pesticide production Incineration scrubber systems Chemical process industry in equipment like flue gas scrubbers, chlorination systems, sulfur dioxide scrubbers, pulp and paper bleach plants, pickling systems, and nuclear fuel reprocessing Waste water processing Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings Flue gas desulfurization systems Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping Sour gas wells Pulp and paper production Waste treatment Pharmaceutical and food processing equipment Alkaline Media Inorganic Salt Solutions Organic Chemicals Organic Acids Oxygen Hydrogen Sulfur Dioxide Hydrogen Sulfide Liquid Metals Chlorine Chemicals Hydrochloric Acid Phosphoric Acid Sea Water Sulfuric Acid Nitric Acid Anodizing and Oxidation Treatments If you are looking for a reliable ss pipe factory, don't hesitate to contact us!
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Now you want to buy from a refinery, there are only two ways; FOB or CIF 1) If it is CIF, LDC, SBLC is accepted; IRLDC 2) If it is FOB the buyer only has two scenarios: a) That it has its tanks ready to inject, either placing the ATV in the name of the refinery or the DTA being signed by the buyer's farm b) If it is tank to vessel, You must, if and only if, extend the tanks for two days to verify the product and inject it into the vessel. LDC is accepted under contract, payment MT103. that is the scenario my friend. It is very simple. The buyer has to follow the Refineries procedure to purchase No Refinery that accepts a product location will fail to meet its commitments. For Singapore there is a CIF seller. It cannot be FOB. Refineries do not have tankers in Singapore to sell FOB. to be addressed to the representative of the refineries: The FOB price in Rotterdam of the EN590 10PPM is currently 480 USD/MT And the CIF in Singapore is 560 USD/MT. Amount of 200,000 MT/month The refineries respect the price at which it is contracted during the 12-month contract.
Analytical Chemistry: A muffle furnace can be used for sample pretreatment in analytical chemistry, such as ashing, combustion, and thermal decomposition of inorganic substances. They can also be used for the pyrolysis, dissolution, and removal of organic substances. Coal quality analysis: used for measuring moisture, ash content, volatile matter content, ash melting point analysis, ash composition analysis, elemental analysis, and can also be used as a universal ashing furnace. Ore smelting: In metallurgy and ore processing, muffle furnaces are used for sintering, reduction, and smelting of ores. They can provide a high-temperature environment to melt or undergo chemical reactions in the ore. Ceramic technology: In ceramic manufacturing, muffle furnaces are widely used for sintering ceramic products, such as ceramic billets, ceramic coatings, and ceramic fibers.
HTF-50/HTF-500 High Pressure TGA HTF series thermal energy analyser uses a new unique design. Thermal gravimetric analysis can be performed at high pressure, water vapor Condition New Product. Precision pressure control, flow control and accurate water vapor component of the process for the user to change the high pressure coal, oil, biomass and other materials analysis, process optimization, quality control and other areas to provide better service. Instrumental Characteristics of High Pressure TGA 01 Mechanical, circuit, atmosphere control integrated design. 02 Furnace automatic lifting, positioning accuracy, high measurement repeatability. 03 Precision flow control of the water vapor generating device. 04 Mass flowmeter precise control of gas flow. 05 Data surveying, mapping automatically. Powerful data processing software. 06 Temperature, and other indicators of quality software correction. 07 HTF series TGA is an advanced high pressure thermogravimetric analyzer that can measure the weight changes of substances in high-pressure, various gas or water vapor environments. The experimental temperature can reach up to 1300 , and the maximum temperature related pressure can reach 5MPa. 08 HTF series TGA has a large weight and sample capacity, making it very suitable for measuring representative samples or complete components of heterogeneous materials. 09 By adopting advanced gas and steam injection, mixing, and pressure control systems, precise control of the reaction gas environment can be ensured, and gas collection functions are integrated for analysis of escaping gases. 10 The sample temperature is measured by a thermocouple directly adjacent to the sample in the reaction gas. The temperature of the furnace and other parts of the reactor is measured using additional thermocouples. A fast PID temperature controller can achieve accurate control of sample temperature under various operating conditions.
