ASTM B338/ ASME SB 338 Titanium Tube (Ti Tube) has a superior strength-to-weight ratio and corrosion resistance is one of the common titanium products. We generally divide ASTM B338/ ASME SB338 Titanium tubes into two types, one is called the seamless titanium tube, and the other is called the welded titanium tube.
ASTM 338 TITANIUM ALLOY STEEL TUBE PROVIDED BY YUHONG
ASTM B338/ ASME SB338 TItanium Alloy Steel Tube
YUHONG GROUP provides the best ASTM B338/ ASME SB338 Titanium Alloy Steel Tube including straight tube, U tube for heat exchanger, boiler, and superheater.
GR.1 TItanium Alloy Steel Tube
GR.2 TItanium Alloy Steel Tube
ASTM B338/ ASME SB338 TITANIUM ALLOY STEEL TUBE FEATURES
ASTM B338 / ASME SB338 Titanium Tube Grade 7 UNS R52400 Alloy Steel Seamless Tube Titanium grade 7 is a corrosion-resistant alpha titanium alloy with similar mechanical properties to the commercially pure grades. There are 28 grades of titanium and titanium alloys for tubing purposes, among which Titanium Grade 2, Grade 7, and Grade 12 are most often seen in tubing applications.
ASME SB-338 is the standard specification for seamless and welded titanium and titanium alloy tubes or tubing which are intended for surface condensers, evaporators, and heat exchangers. ASME SB-338 has a small palladium addition to improving corrosion resistance, particularly in mineral acids and strong brines.
ASTM B338/ASME SB338 TUBING APPLICATIONS
Chlorination systems
Flue gas scrubbers
Outlet ducting and stack liners for power plants, pulp and paper bleach plants, sulfur dioxide scrubbers, and weld overlay of less corrosion resistant metals
Acid production and pickling systems
Pharmaceutical industries use alloy fittings and tubing to avoid contamination caused by corrosion related failures
Cellophane manufacturing
Chlorination systems
Pesticide production
Incineration scrubber systems
Chemical process industry in equipment like flue gas scrubbers, chlorination systems, sulfur dioxide scrubbers, pulp and paper bleach plants, pickling systems, and nuclear fuel reprocessing
Waste water processing
Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings
Flue gas desulfurization systems
Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping
Sour gas wells
Pulp and paper production
Waste treatment
Pharmaceutical and food processing equipment
Alkaline Media
Inorganic Salt Solutions
Organic Chemicals
Organic Acids
Oxygen
Hydrogen
Sulfur Dioxide
Hydrogen Sulfide
Liquid Metals Chlorine Chemicals
Hydrochloric Acid
Phosphoric Acid
Sea Water
Sulfuric Acid
Nitric Acid
Anodizing and Oxidation Treatments
If you are looking for a reliable ss pipe factory, don't hesitate to contact us!
Supplier: Icumsa 45 sugar, nano titanium, all types of thermal coal, metallurgical coal and pet coke, all types of used industrial mfg. equipment.
We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc
Standards ASTM / ASME B861, B862, B338 / SB861, SB862, SB338 Outer Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24â?? NB Thickness 0.3mm â?? 50 mm Type Seamless / ERW / Welded Pipes Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Seamless Pipes & Tubes Size 1 / 8â?³ NB â?? 24â?³ NB ERW Pipes & Tubes Size 1 / 8â?³ NB â?? 36â?³ NB Length Single Random, Double Random & Required Length End Plain End, Beveled End, Treaded
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
Supplier: Stainless steel pipe, stainless steel plate, stainless steel round bar ,stainless steel seamless pipe, titanium pipe, titanium plate, monel plate ,monel pipe, titanium wire , monel wire , monel seamless pipe ,stainless steel elbow, stainless steel circle
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.
Standard: astm Place of origin: shaanxi china (mainland) Type: welded Steel grade: 300 Series certification: rohs Welding line type: erw Thickness: 0.3mm-15.24mm Outer diameter: 2mm-219mm Specification:astm b338, b337, b861 Material:gr1, gr2, gr3, gr5, gr9 Size:od 2-20mmthickness:0.2-10mm length:1500m
Cold-rolled: OD: 8.0mm-114.0mm (0.32"-4.49"), WT: 0.5mm-7.5mm (0.02"-0.30"), Length: 4000mm (157.5") max (OD.: 8.0mm-15.0mm, 0.32"-0.59"), 12000mm (472.4") max (OD. over 15mm, 0.59") Extruded: OD: 25mm-210mm (0.98"-8.27"), WT: 4mm-30mm (0.157"-1.18"), Length: 1000mm-10000mm (39.4"-393.7") Material: Gr.1, Gr.2, Gr.3, Gr.7, Gr.9, Gr.12, etc. Standard: ASTM B 338, ASTM B 337, ASTM B 861 Shape: Round