Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 36hp/4500rpm (26.5kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 808 (49) Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 2 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 539 (33) Maximum output hp(kW)/rpm at crankshaft 18hp/4500rpm (13.2kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Metals like aluminium ingots a7/a8, copper cathode scrap, food products like barley, flax seeds, sunflower seeds, soybean, wheat, rapeseeds, sunflower meal, soybean meal, corn forage, wheat bran, granulated bran, flour, sunflower oil, soybean oil, rapeseed oil. gas and oil products: en59010 ppm, 50 ppm, ago, ado, d2, d6, jet a1. gasoline r9n 91/92/93/95/98Â unleaded.
We are suppliers bitumen, hdpe, pp, pvc, urea , jet a1 we can supply you with best quality original at a fair price. we also provide samples and any required lab certificates. please let me know if you are interested in our products and if you needed any other info, iâ??ll be glad to assist..
Copper Cathodes Specifications: Grade A Min.CU - Purity 99,97% - 99,99% Dimension: 914mm x 914mm x 12mm (LME Standard) Weight of each sheet: 125 +/- 2% Kg Net weight each pallet: 2.0MT +/- 2% Fix Price: USD 6800 per MTon CIF or Discount LME -16% (negotiable based on quantities) CIF Origin: America Trial order: 2.500MT/3.000 MT Quantity up to 50.000 MT/Month Payment Terms: 100% DLC or SBLC at port of discharge after direct buyer checks or SGS checks You can contact me by email or WhatsApp for any information and we will be happy to answer you, we prefer to accept direct serious buyers or mandatory agent with official LOI from buyers, thank you.
Output: 3hp-12hp 1.Proven Launtop Technology 2.Proven economy and reliability 3.Compact and lightweight 4.Fast and easy all weather starting 5.Automatic low oil level cut out 6.Heavy duty air cleaners 7.Lower fuel consumption compared to LA engine Brand new production, factory direct sales, you deserve it
Aluminum Ingots min. Purity 98% Price USD 1900 per MTon CIF Trial order: 3.000 MT Quantity from 10.000Ton/Month up to 50.000 MTon/Month x 12 month contract Origin in Africa Payment Terms: 100% DLC or SBLC at port of discharge after direct buyer checks or SGS You can contact me by email or WhatsApp for any information and we will be happy to answer you, we prefer to accept direct serious buyers or mandatory agent with official LOI from buyers, thank you.
Wood charcoal are solid fuel made from compressed wood charcoal. They are used for cooking, grilling, and heating with the advantage of burning longer and producing less smoke. wood Charcoal are also environmentally friendly because they use wood waste or recycled materials. SPECIFICATION: Appearance : Black Variety : Solid or Square Size : 4-13 cm / according to request Moisture : 7% Max Carbon : 75% Max Burning resistance : 2-3 hours MOQ : 20 Metric tons COO : Indonesia Shipping terms : FOB, CNF & CIF Payment terms : TT (DP) & LC at sight Packing Type : 10, 20, 25, 50 kg bag
Aluminium UBC (Cans) Price USD 1400 per MTon CIF Trial order: 3.000 MT Quantity up to 40.000 MTon/Month x 12 month contract Origin Africa Payment Terms: 100% SBLC/DLC at the discharge port after the buyer checks, or DLC Usance 90 days; You can contact me by email or WhatsApp for any information and we will be happy to answer you, we prefer to accept direct serious buyers or mandatory agent with official LOI from buyers, thank you.
Animal feed (alfalfa hay, rhodes grass, wheat straw), used rails r50, r65, jet fuel a 1, diesel d6, diesel en 590, pet coke, urea, icumsa sugar 45, brown sugar, yellow corn (human consumption+animal feed), soybean (human+animal), wheat, indian rice, chicken (paws, feets, mjw), aluminium ingots a7, copper cathode, sunflower oil, palm oil, rapeseed oil.
Fuel transfer pump CBH-80 is made of aluminum alloy with low pressure casting. The mechanical seal on the spindle improves the sealing performance, and an overflow hole is provided to prevent excessive pressure. Technical Parameters Model CBH-80 Rated pump power 7500W Voltage 380V Rotation frequency 1450, s-1 (rpm) Direction of pump rotation Right or Left Supply 30m3/h Rated head 26m Self-priming height, not less than 6.5m Self-priming time, no more than 120s Permissible duration of self-priming, no more than 300s Leakage through the mechanical seal, not more than 30cm3/h Electric motor power 11 or 15kW
Creation among angels welcome to partner and invest with yorkshire holdings, a world of fun, adventure and profit awaits you. we are a globally integrated company in the field of energy, petrochemicals. in addition to meeting the needs of a large group of customers, our unique products also make them profitable. our products include the following groups: oil and gas materials : gas oil(diesel fuel),bitumen, jet fuel, naphtha, lpg, paraffine, vaseline , base oil, engine oil(lubricants) petrochemical products(chemical):urea n46,urea npk,sulphur plastic industry raw material: ethylene polymers, polyethylene pipes styrene polymers, polypropylene polymers or other olefins, polyesters, epoxides and polyesters, plastic containers and products, cellulose and its chemical derivatives acrylic polymers, plastic pipes and hoses and fittings.
AUTOMOTIVE FUEL DIESEL OIL En590 SPECIFICATION GASOIL 10 GOST � 52368-2005 (�?N 590:2004), CLASS 1, TYPE III Unit Description Value Density at 15 degr. kg/m3 max. 845 Cetane index min. 49 Kinematic viscosity at 20 Co mm2 (cSt) Min. 2.0 / Max. 4.5 Acidity, mg KOH for 100 cm2 of fuel, max. 10 Ash content, %, max. 0.01 Sulphur content, mg/kg, max. 10 Hydrogen sulphide content Absent Copper plate test Passed Water soluble acids & alkalis Passed Content of mechanical impurities Passed Water content mg/kg 200 Flash point determined in a closed cup, Cáµ? Min. 55 Solidification temperature, Cáµ?, Max. Cloud temperature, Cáµ?, Max. 16 Filterability temperature Cáµ? -27 Fat acid methyl ether content (FAME), % 5 Bacterial contamination (IP 385), CFU /litre, Max. 1,000 Quantity: 100,000 MT for Month's CIF, Singapure
Specifications Rated Output 419 kW 57 mhp Rated Speed 3000 rpm Displacement 219 L 134 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 88 mm x 90 mm 346 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Natural Alternator 12V 125A Dry weight without gear 220 kg 485 lbs Dimensions 870 mm x 589 mm x 627 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM35P marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A C35 panel Extension harness 3m 5m 10m Second station TFX Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Specifications Rated Output 588 kW 80 mhp Rated Speed 3200 rpm Displacement 2 L 122 cu in No of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm 331 in x 354 in Combustion system Direct Injection Bosch Common Rail System Aspiration Turbocharged Intercooled Alternator 12V 125A Dry weight without gear 229 kg 505 lbs Dimensions 909 mm x 613 mm x 675 mm Controls Mechanical optional VC10 system Certifications RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS NOTE 1 kW 13596 mhp 134102 bhp Fuel condition density at 15C 0842 gcm Technical data is according to ISO 8665 ISO 3046 Fuel temperature 40C at the inlet of the fuel injection pump ISO 8665 Length includes KM4A2 marine gear Dimensions may vary with other gearselbow Standard Engine Package Exhaust mixing elbow Ltype Alternator 12V 125A Seawater pump rear mounted B25 panel Flexible mounts Mechanical throttle sensor Fuel prefilter with water separator Fresh water expansion tank Belt safety cover Optional Accessories Highriser mixing elbow instead of Lelbow Secondary alternator 12V 125A or 24V 60A Seawater pump front mounted C35 panel Extension harness 3m 5m 10m Second station Sidemount control head VC10 Vessel Control System NMEA2000 Engine monitoring system Semi 2pole SOLAS including Certificate factory fit only Opposite dipstick Hot water kit with cocks Extension saildrive leg 75 mm Propeller cone nut kit SD60 Onboard spare parts kit
Triacs Belong To The Thyristor Family And Are Closely Related To Silicon-Controlled Rectifiers (Scr). However, Unlike Scrs, Which Are Unidirectional Devices (I.E. Can Conduct Current Only In One Direction), Triacs Are Bidirectional And So Current Can Flow Through Them In Either Direction. Another Difference From Scrs Is That Triacs Can Be Triggered By Either A Positive Or A Negative Current Applied To Its Gate Electrode, Whereas Scrs Can Be Triggered Only By Currents Going Into The Gate. In Order To Create A Triggering Current, A Positive Or Negative Voltage Has To Be Applied To The Gate With Respect To The A1 Terminal (Otherwise Known As Mt1). Once Triggered, The Device Continues To Conduct Until The Current Drops Below A Certain Threshold, Called The Holding Current. The Bidirectionality Makes Triac Very Convenient Switches For Ac Circuits, Also Allowing Them To Control Very Large Power Flows With Milliampere-Scale Gate Currents. In Addition, Applying A Trigger Pulse At A Controlled Phase Angle In An Ac Cycle Allows One To Control The Percentage Of Current That Flows Through The Triac To The Load (Phase Control), Which Is Commonly Used, For Example, In Controlling The Speed Of Low-Power Induction Motors, In Dimming Lamps And In Controlling Ac Heating Resistors Two Modes Of Led Panel Light Dimming: Mobile App Based Dimming- The Customer Sitting In Any Part Of The Room/ House Can Control The Intensity Of The Light By Using His Mobile App The Manual Mode Facilitates Control By Varying The Triac Manually Through The Knob Provided In The Control Unit. Optional: Wifi App Based Dimming Occupancy Based Dimming
Triacs Belong To The Thyristor Family And Are Closely Related To Silicon-Controlled Rectifiers (Scr). However, Unlike Scrs, Which Are Unidirectional Devices (I.E. Can Conduct Current Only In One Direction), Triacs Are Bidirectional And So Current Can Flow Through Them In Either Direction. Another Difference From Scrs Is That Triacs Can Be Triggered By Either A Positive Or A Negative Current Applied To Its Gate Electrode, Whereas Scrs Can Be Triggered Only By Currents Going Into The Gate. In Order To Create A Triggering Current, A Positive Or Negative Voltage Has To Be Applied To The Gate With Respect To The A1 Terminal (Otherwise Known As Mt1). Once Triggered, The Device Continues To Conduct Until The Current Drops Below A Certain Threshold, Called The Holding Current. The Bidirectionality Makes Triac Very Convenient Switches For Ac Circuits, Also Allowing Them To Control Very Large Power Flows With Milliampere-Scale Gate Currents. In Addition, Applying A Trigger Pulse At A Controlled Phase Angle In An Ac Cycle Allows One To Control The Percentage Of Current That Flows Through The Triac To The Load (Phase Control), Which Is Commonly Used, For Example, In Controlling The Speed Of Low-Power Induction Motors, In Dimming Lamps And In Controlling Ac Heating Resistors Two Modes Of Led Panel Light Dimming: Mobile App Based Dimming- The Customer Sitting In Any Part Of The Room/ House Can Control The Intensity Of The Light By Using His Mobile App The Manual Mode Facilitates Control By Varying The Triac Manually Through The Knob Provided In The Control Unit. Optional: Wifi App Based Dimming Occupancy Based Dimming
1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 ± 100r / min 6. Grinding wheel size: 350 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm
K1270 Rail Cutting Machine 1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 �± 100r / min 6. Grinding wheel size: �? 350 �? 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm