Triacs Belong To The Thyristor Family And Are Closely Related To Silicon-Controlled Rectifiers (Scr). However, Unlike Scrs, Which Are Unidirectional Devices (I.E. Can Conduct Current Only In One Direction), Triacs Are Bidirectional And So Current Can Flow Through Them In Either Direction.
Another Difference From Scrs Is That Triacs Can Be Triggered By Either A Positive Or A Negative Current Applied To Its Gate Electrode, Whereas Scrs Can Be Triggered Only By Currents Going Into The Gate. In Order To Create A Triggering Current, A Positive Or Negative Voltage Has To Be Applied To The Gate With Respect To The A1 Terminal (Otherwise Known As Mt1).
Once Triggered, The Device Continues To Conduct Until The Current Drops Below A Certain Threshold, Called The Holding Current.
The Bidirectionality Makes Triac Very Convenient Switches For Ac Circuits, Also Allowing Them To Control Very Large Power Flows With Milliampere-Scale Gate Currents. In Addition, Applying A Trigger Pulse At A Controlled Phase Angle In An Ac Cycle Allows One To Control The Percentage Of Current That Flows Through The Triac To The Load (Phase Control), Which Is Commonly Used, For Example, In Controlling The Speed Of Low-Power Induction Motors, In Dimming Lamps And In Controlling Ac Heating Resistors
Two Modes Of Led Panel Light Dimming:
Mobile App Based Dimming- The Customer Sitting In Any Part Of The Room/ House Can Control The Intensity Of The Light By Using His Mobile App
The Manual Mode Facilitates Control By Varying The Triac Manually Through The Knob Provided In The Control Unit.
Optional:
Wifi App Based Dimming
Occupancy Based Dimming
Triacs Belong To The Thyristor Family And Are Closely Related To Silicon-Controlled Rectifiers (Scr). However, Unlike Scrs, Which Are Unidirectional Devices (I.E. Can Conduct Current Only In One Direction), Triacs Are Bidirectional And So Current Can Flow Through Them In Either Direction. Another Difference From Scrs Is That Triacs Can Be Triggered By Either A Positive Or A Negative Current Applied To Its Gate Electrode, Whereas Scrs Can Be Triggered Only By Currents Going Into The Gate. In Order To Create A Triggering Current, A Positive Or Negative Voltage Has To Be Applied To The Gate With Respect To The A1 Terminal (Otherwise Known As Mt1). Once Triggered, The Device Continues To Conduct Until The Current Drops Below A Certain Threshold, Called The Holding Current. The Bidirectionality Makes Triac Very Convenient Switches For Ac Circuits, Also Allowing Them To Control Very Large Power Flows With Milliampere-Scale Gate Currents. In Addition, Applying A Trigger Pulse At A Controlled Phase Angle In An Ac Cycle Allows One To Control The Percentage Of Current That Flows Through The Triac To The Load (Phase Control), Which Is Commonly Used, For Example, In Controlling The Speed Of Low-Power Induction Motors, In Dimming Lamps And In Controlling Ac Heating Resistors Two Modes Of Led Panel Light Dimming: Mobile App Based Dimming- The Customer Sitting In Any Part Of The Room/ House Can Control The Intensity Of The Light By Using His Mobile App The Manual Mode Facilitates Control By Varying The Triac Manually Through The Knob Provided In The Control Unit. Optional: Wifi App Based Dimming Occupancy Based Dimming
LED light.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
Powerï¼? 900W LED Qtyï¼? 72pcs 5W LED & 6pcs 90W COB Voltage ï¼? AC85-265V Work frequencyï¼? 50/60Hz Lumen ï¼? >15400Lm Dimmensionï¼? 660X385X118mm N.W ï¼? 11.4kg Coverage ï¼? 1.0Ã?1.2 m Warranty ï¼? 50000 hours
Power 900W LED Qty 72pcs 5W LED & 6pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen >15400Lm Dimmension 660X385X118mm N.W 11.4kg Coverage 1.0 1.2 m Warranty 50000 hours
Power 1200W LED Qty 96pcs 5W LED & 8pcs 90W COB Voltage AC85-265V Work frequency 50/60Hz Lumen 21050Lm Dimmension 848X385 X118mm N.W 14.8kg Coverage 1.5 X1.0 m Warranty 50000 hours
Power (W): 7/9/12; Power factor: 0,5/0,9; Voltage (V): 100-277/120/220-240; CCT (K): 3000/4000/5000/6500; Luminous efficacy (lm/W): 71/75/81/87; CRI (Ra): 80; Life span (hrs): 25.000; Various options: - 1-CCT: 3000/4000/5000/5700/6500K - 3-CCT changeable (adjust by wall switch or switch on driver); Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 9/12; Power factor: 0,5; Voltage/Frequency (V/Hz): 220V/50-60Hz; CCT (K): 3000/6500; Luminous efficacy (lm/W): 55/60/61/66; CRI (Ra): 80; Life span (hrs): 20.000; Flicker-free, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Power (W): 7/9/12; Power factor: 0,5/0,9; Voltage (V): 100-277/120/220-240; CCT (K): 3000/4000/5000/6500; Luminous efficacy (lm/W): 71/77/78/83/88; CRI (Ra): 80; Life span (hrs): 25.000; Various options: - 1-CCT: 3000/4000/5000 5700/6500K - 3-CCT changeable (adjust by wall switch or switch on driver); Flicker-free; CE, KC certified, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
