1. Media: water, oils and other low corrosive media 2. Pressure:1.0Mpa 3. Temperature: 20oC~120oC 4. Near speed:15m/ses.
Pressure: 0-4MPa Linear speed: 23 m/s Shaft diameter: 33-85mm Temperature :(depending on material of the seal ring) Buna N:-20~+80oC Polyfluoroprene: 0~+150oC Tetrafluoroethylene resin: -80oc~+250oc Media: water, oils and other low corrosive medi.
Single end face seal Balance type No requirement for rotating direction Complying with DIN24960 H7N mechanical seal is widely used, logically designed and good in interchangeability of parts, allowing easy insertion of the seal ring and easy replacement. The throw out collar is retained by the drive eye to prevent the spring from falling off.
Sintered and finish Tungsten rings: Materials: virgin cemented carbide, tungsten carbide alloy and nonmetal. Used in geological prospecting, machinery/tool manufacturing and serves as drill bit in wind drill and electric drills for coal digging •Fit for precision lathe are used in nonstop cutting of die-cast iron •Semi-precision, precision, and small-section precision lathes are used in interrupted cutting and whirling of rough turn; The grade, performance and application of carbide alloy. PP bag, then in carton or as special requirement.
Cathay Mechanical Seals (Kunshan) Co.,Ltd is a joint venture of Italy, Germany and China, manufacturing high quality mechanical seals for pumps, mixers, compressors, etc. Our type SP-09 seal can be used for Alfa Laval pumps.
Our company professionally researches, develops, makes and sells the carbide in ceramic. The founder, mr. Xu zhengkai, produced the first batch of reaction bonded silicon carbide in the beginning of the 1980s and developed the material of silicon carbide added carbon in the middle of 1990s, which reaches to the advance level in the world. At the same time, it fills in the blank in sealing material in domestic. From 2001, our company produces sintered silicon carbide in enormous quantities, which performance index reach the world level...... The production line of reaction bonded sic and sintered sic, from raw material to finished products, are nationalized, after our company supports to research silicon carbide, design and make equipment for production, with perfected technology.
Pressure:
59U Main characteristics Mediums:water, oil, etc.Weak corrosive medium. Pressure: Up to 24bar Temperature:-20f+~+150f Linear velocity:f_10m/s
John crane type 58u replacement to: burgmann bt. C5. Ku seal Our products are mechanical seals, pump mechanical seals, auto mechanical seal, bellow mechanical seal, shaft mechanical seals, elastomer bellows seals, single spring seals, teflon wedge seals, pusher design seal, metal bellows seals, cartridge seals, etc. Kinds of mechanical seals. Including, rubber bellows seals, pusher seals, ptfe wedge seals, metal bellows seals, cartridge seals, etc. The seals are available in various material combinations, and in both metric and inch sizes. We also do tailor-made seals according to the customers' drawings and specs. Shape (for gasket): mechanical seal Material: mechanical seal Function: shaft sealing Standard or nonstandard: standard Export markets: global Product description John crane type 58u replacement seal Product description: Tb58u mechanical seal, for industrial pump, blower pump, diving pump, circulating pump mechanical seal, replace the mechanical of john crane and burgmann. Topbon mechanical seal manufacture, topbon products can replace the mechanical seals produced by burgmann and john crane and be widely used in petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry. Topbon mechanical seal factory. Is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal. Cartons
Usage : Industrial,garage Shaft Diameter : 10 - 80 mm Pressure : 10 bar (max) Velocity : 15 m/sec Face Material : Carbon,Silicon Carbide,CRMO Cast Steel Elastomers : NBR,Viton,EPDM Temperature : 20-140 degree C With our years of experience & in depth knowledge in this field, we are engaged in offering a quality-assured array of Mechanical Conical Spring Seal
Standard or Nonstandard:standard Brand:chesterton891 type:double seal Style:Mechanical seal Brand name:JY Temperature:-20-200degree pressure:15bar Material: face:CA,CE,SC,SSIC,TC,Mets:316SS,Hastenlloy C. Model Number U800 Application:paper Product feature: JY U800 mechanical seal alternative to Chesterton 891 seals for water pumps JYU800 mechanical seal alternative to Chesterton 891 seals Multi-Spring Single Seal Product Description: JY U800 mechanical seal alternative to Chesterton 891 seals for water pumps Operating Conditions: Pressure: =25 Bar Temperature: -20?~200? Speed: = 20 m/s Seat compability: Standard:A12 Alternatives:A7 Materials: Face: Carbon,SiC, SSiC, TC Seat: SiC, SSiC, TC Secondary Sealing: EPDM,FKM,NBR Spring and Metal parts: 316SS,304SS
Quick Detail: Standard or Nonstandard: Standard Style:Mechanical Seal Material:CARBON/316SS/FKM/316SS Place of Origin:Jiangsu, China (Mainland) Brand Name:JY Model Number:TJ-0762-21-2 Pressure:=10 Bar Temperature:-20~180 ? Speed:= 12 m/s. Packing Delivery Packing Details:standard packing Delivery Detail:shipped in 30days after payemnt. Product Feature John crane mechanical seals TJ-0762-21-2 for SULLAIR compressor 600896-001 John crane mechanical seals 3.00" for SULLAIR compressor Part No.:600896-001 Product Description; Operating conditions: Pressure: =10 Bar Temperature: -20?~180? Speed: = 12 m/s Seat Compability:standard seat Materials: Face: Carbon,SiC, SSiC, TC Seat: SiC, SSiC, TC,304SS,316SS Secondary Sealing: FKM,NBR,EPDM Metal: 304SS,316SS
Model number: jccs301 Material: metal $ plastic Color:red black yellow green, etc Application: containers trucks Packing: carton 1. Inner part is made by zinc casting 2.Aluminium alloy lock body, without any plastic 3.Non-preformed galvanized cable 4 .Pull tight locking mechanism, easy to lock 5.Company name or logo and serial numbers are laser printed 6.Bar code is available 7.Various colors are available, or do as per special requirements
China seals oem luggage seal for airline shipping Model number: jccs301 Material: metal $ plastic Color:red black yellow green, etc Application: containers trucks Packing: carton Customize The length of the cable can be customized upon requirements; standard 25cm; Printing Laser printing name, logo, serial numbe or barocde; Color Red, yellow, green, blue; Package Upon the customized cable length Seal Seal by hand; removable by cable cutters; Application Trucks, traliors and doors, heavy-duty boxs and cases.
1. Rubber Bellow seal R11 for pumps,equals to Johncrane JC1 2. Our seals can replace the original seals. 3. We always keep balance both on Price and Quality. Brand: sealcon Performance Capabilities Temperature:-20? to 150?,dependent on the elastomer. Pressure:Up to 10 bar Speed:Up to 12 m/s End play/axial float allowance±0.1mm Sizes 5/8� to 4� Materials Combination Face: Carbon, SiC, TC Seat: Ceramic, SiC, TC Bellow: NBR,EPDM,VITON etc. Spring: SS304,SS316 Metal parts: SS304, SS316
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Description 22451-1 Mechanical Seal is used for Mission Magnum Pumps, 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14. Type 1-2. seal is identical to Mission pump seal NOV# 22451-1, 648414308 and T1-3.5 is identical to Mission Magnum XP pump seal NOV#24306, 658416102. Mechanical seal (Tungsten carbide faces), P/N: 22451-1, 648414308; 22451-2, 648414340; 22451-3, 648414357; 22451-9A Dimensions: 3.5inch, 2.5 inch, 1.875 inch and 1.5 inch Material: Tungsten Carbide, Viton, SS316 machining parts Seal, Mechanical (Tungsten carbide faces), P/N: 22451-1, 648414308 Seal, Mechanical (ceramic to carbon face), P/N: 22451-2, 648414340 Seal, Mechanical (silicon to tungsten face), P/N: 22451-3, 648414357 Seal, Mechanical (silicon carbide faces), P/N: 22451-9A Packing shaft with lantern ring (Graphite), P/N: 25014-04M-B, 661007005 Packing shaft with lantern ring (King), P/N: 25014-04M-BA, 661007008 Packing shaft with lantern ring (Teflon), P/N: 250147-04M-D, 661007011 Packing shaft with lantern ring (Kevlar), P/N: 25014-04M-C, 661007006 Packing, Shaft -M.S. Backup (Graphite), P/N: 648402600 Ring, Lantern, or Lantern Ring, P/N: 648408607 A set of mechanical seal includes Mechanical seal, 3 pcs packings and a pin.
P/N: 22451-1 (648414308) Seal, Mechanical Tungsten Carbide for Mission Magnum type Centrifugal Pumps. Type 1-2.5 seal is identical to Mission pump seal NOV 22451-1, 648414308 and T1-3.5 is identical to Mission Magnum XP pump seal NOV#24306, 658416102. Mechanical seal (Tungsten carbide faces), P/N: 22451-1, 648414308; 22451-2, 648414340; 22451-3, 648414357; 22451-9A Dimensions: 3.5inch, 2.5 inch, 1.875 inch and 1.5 inch Material: Tungsten Carbide, Viton, SS316 machining parts Seal, Mechanical (Tungsten carbide faces), P/N: 22451-1, 648414308 Seal, Mechanical (ceramic to carbon face), P/N: 22451-2, 648414340 Seal, Mechanical (silicon to tungsten face), P/N: 22451-3, 648414357 Seal, Mechanical (silicon carbide faces), P/N: 22451-9A Packing shaft with lantern ring (Graphite), P/N: 25014-04M-B, 661007005 Packing shaft with lantern ring (King), P/N: 25014-04M-BA, 661007008 Packing shaft with lantern ring (Teflon), P/N: 250147-04M-D, 661007011 Packing shaft with lantern ring (Kevlar), P/N: 25014-04M-C, 661007006 Packing, Shaft -M.S. Backup (Graphite), P/N: 648402600 Ring, Lantern, or Lantern Ring, P/N: 648408607 A set of mechanical seal includes Mechanical seal, 3 pcs packings and a pin.
