Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Slip Ring Seal A slip ring seal is a type of mechanical sealing device used to prevent fluid or gas leakage in rotating machinery. It is typically used in equipment with rotating shafts, such as electric motors or generators, to provide a seal around the rotating shaft and prevent the leakage of fluids or gases from one side of the seal to the other. A slip ring seal is typically made up of a stationary component and a rotating component, and is designed to maintain a sealing interface as the shaft rotates. Performance and Purpose Slip ring combined seal is made up of low-friction PTFE composite slip ring and O-ring. It has the advantages of friction resistance, temperature resistance, high pressure bearing ability, high linear velocity, small friction force and long use-life. And which is applicable to dynamic and static seal of hydraulic and pneumatic system in aircraft, metallurgy, petroleum, chemical, textile, food industry and so on. Advantage The structure is simple, easy to install and can be used repeatedly The sealing performance is reliable and adjustable Different types of PTFE materials(Self pressed PTFE barrel material)can be selected according to the working conditions of sealing environment The working life of dynamic pressure seal is 5 ~ 10 times higher than that of conventional rubber sealing products, and the highest working life can reach dozens of times It can be used as oil-free lubrication seal The friction force is small, and the dynamic and static friction force are equal. The friction force is 1 / 2 ~ 1 / 4 of the O-type rubber ring, which can eliminate the crawling phenomenon of motion at low speed and low pressure. If you are looking for more details, kindly visit our website.
Sealing component is mainly used in hydro-static testing machines for pressure tests of steel pipes, it is applicable to the pressure testing of casings, tubings, natural gas pipes and other steel pipes. As ultra pressure components, sealing components are very suitable for machines that require high pressure seals. Descripation: The sealing component is made up of a polyurethane sealing ring and fan-shaped supporters. It is mainly used in hydro-static testing machines for pressure tests of steel pipes. In the non-working state there will be a gap between the sealing ring and the surface of the steel pipe. When testing, hydraulic liquid is applied to the surface of the sealing ring. The ring is then pressed to enclose the surface of steel pipe firmly, allowing pressure testing can be performed. It is applicable to the pressure testing of casings, tubings, natural gas pipes and other steel pipes. It has also been used in leak inspection of steel pipes, connections, welded joints and sealing for high pressure valves.
The u ring seal makes use of the advantages of Polyurethane, such as high strength, hardness, good elasticity and durability. It is used in the hydraulic testing of oil well casing tubes, steel pipes and a variety of welded steel pipes of the petroleum and natural gas industry. Product information The u ring seal makes use of the advantages of Polyurethane, such as high strength, hardness, good elasticity and durability, it has high sealing performance, abrasion resistance, and low deformation.It is used in the hydraulic testing of oil well casing tubes, steel pipes and a variety of welded steel pipes of the petroleum and natural gas industry.
BEIJING JIANKE HUIFENG SCIENCE & TECHNOLOGY is a manufacturer of high-performance sealing for hydraulic tester and pipeline solutions with an emphasis on safety, longevity, and productivity. We are the largest international supplier of sealing solutions from China in terms of volume, while we are also leaders in terms of quality of product and customer care. We work in partnership with our customers, industry associations, and governmental entities to understand their unique sealing challenges and respond with innovative solutions that keep people safe while increasing their profitability.
Large gap ultra-high-pressure sealing components (Type Ultra High Pressure (UHP) seals are specialized seals designed to withstand high pressure conditions, typically above 20,000 PSI (1379 bar). They are commonly used in applications such as oil and gas exploration, hydraulic systems, and chemical processing. UHP seals can be made of materials such as polytetrafluoroethylene (PTFE), carbon-graphite, and other high-performance polymers. The design and material selection of UHP seals must consider factors such as pressure, temperature, media compatibility, and sealing dynamic performance to ensure reliable and long-lasting performance. Categories: Large gap ultra high pressure sealing components, Products, PU material seal, Sealing Ring For ERW Steel Pipe, Sealing ring for Seamless steel pipe Product Information The high pressure sealing assembly consists of a polyurethane seal and a fan-shaped support. It is mainly used for pressure testing of steel pipe by hydraulic tester. In the non-working condition, a gap exists between the seal and the surface of the steel pipe. During the test, hydraulic oil is applied to the surface of the seal ring. Then the ring is compressed and the surface of the steel pipe is tightly wrapped, and the test pressure can be performed. It is suitable for pressure test of steel pipe such as casing, oil pipe and natural gas pipe. Also used for leak detection of steel pipes, joints, welded joints and sealing of high pressure valves. The high pressure sealing assembly consists of a polyurethane seal and a fan-shaped support. It is mainly used for pressure testing of steel pipe by hydraulic tester. In the non-working condition, a gap exists between the seal and the surface of the steel pipe. During the test, hydraulic oil is applied to the surface of the seal ring. Then the ring is compressed and the surface of the steel pipe is tightly wrapped, and the test pressure can be performed. It is suitable for pressure test of steel pipe such as casing, oil pipe and natural gas pipe. Also used for leak detection of steel pipes, joints, welded joints and sealing of high pressure valves. Benefits Lip optimization: the lip fits more closely to the groove surface under peripheral pressure, and the higher the pressure, the better the lip seal. Scalloped bracket shrinks and expands radially with the seal while increasing the strength of the seal. Working Environment Comply with a number of hydraulic test requirement standards such as API 5CT-2018, ISO11960-2014 steel pipe for oil and gas industry casing or oil pipe GB/T9711-2017; GB/T8163-2018 seamless steel pipe; GB/T3091-2015 welded steel pipe. Working pressure: â?¤ 120 MPa Working temperature: -20 to +80â?? Working medium: water, emulsion, hydraulic oil Material: Polyurethane For more information, please visit our website.
Large gap ultra-high-pressure sealing components (Type D Ultra High Pressure (UHP) seals are specialized seals designed to withstand high pressure conditions, typically above 20,000 PSI (1379 bar). They are commonly used in applications such as oil and gas exploration, hydraulic systems, and chemical processing. UHP seals can be made of materials such as polytetrafluoroethylene (PTFE), carbon-graphite, and other high-performance polymers. The design and material selection of UHP seals must consider factors such as pressure, temperature, media compatibility, and sealing dynamic performance to ensure reliable and long-lasting performance. Categories: Large gap ultra high pressure sealing components, Products, PU material seal, Sealing Ring For ERW Steel Pipe, Sealing ring for Seamless steel pipe Product Information The high pressure sealing assembly consists of a polyurethane seal and a fan-shaped support. It is mainly used for pressure testing of steel pipe by hydraulic tester. In the non-working condition, a gap exists between the seal and the surface of the steel pipe. During the test, hydraulic oil is applied to the surface of the seal ring. Then the ring is compressed and the surface of the steel pipe is tightly wrapped, and the test pressure can be performed. It is suitable for pressure test of steel pipe such as casing, oil pipe and natural gas pipe. Also used for leak detection of steel pipes, joints, welded joints and sealing of high pressure valves. The high pressure sealing assembly consists of a polyurethane seal and a fan-shaped support. It is mainly used for pressure testing of steel pipe by hydraulic tester. In the non-working condition, a gap exists between the seal and the surface of the steel pipe. During the test, hydraulic oil is applied to the surface of the seal ring. Then the ring is compressed and the surface of the steel pipe is tightly wrapped, and the test pressure can be performed. It is suitable for pressure test of steel pipe such as casing, oil pipe and natural gas pipe. Also used for leak detection of steel pipes, joints, welded joints and sealing of high pressure valves. Benefits Lip optimization: the lip fits more closely to the groove surface under peripheral pressure, and the higher the pressure, the better the lip seal. Scalloped bracket shrinks and expands radially with the seal while increasing the strength of the seal. Working Environment Comply with a number of hydraulic test requirement standards such as API 5CT-2018, ISO11960-2014 steel pipe for oil and gas industry casing or oil pipe GB/T9711-2017; GB/T8163-2018 seamless steel pipe; GB/T3091-2015 welded steel pipe. Working pressure: 120 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane For more information, please visit our website.
