Our company professionally researches, develops, makes and sells the carbide in ceramic. The founder, mr. Xu zhengkai, produced the first batch of reaction bonded silicon carbide in the beginning of the 1980s and developed the material of silicon carbide added carbon in the middle of 1990s, which reaches to the advance level in the world.
At the same time, it fills in the blank in sealing material in domestic. From 2001, our company produces sintered silicon carbide in enormous quantities, which performance index reach the world level......
The production line of reaction bonded sic and sintered sic, from raw material to finished products, are nationalized, after our company supports to research silicon carbide, design and make equipment for production, with perfected technology.
Sintered and finish Tungsten rings: Materials: virgin cemented carbide, tungsten carbide alloy and nonmetal. Used in geological prospecting, machinery/tool manufacturing and serves as drill bit in wind drill and electric drills for coal digging •Fit for precision lathe are used in nonstop cutting of die-cast iron •Semi-precision, precision, and small-section precision lathes are used in interrupted cutting and whirling of rough turn; The grade, performance and application of carbide alloy. PP bag, then in carton or as special requirement.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping. Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals. Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing. Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring Advantages The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure. The sealing material has the advantage of high strength, high hardness and good elasticity Working conditions Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes. Working pressure: 80 MPa Working temperature: -20 to +80 Working medium: water, emulsion, hydraulic oil Material: Polyurethane If you want to learn more, please visit our website.
SiC Sintered silicon carbide seal ring ( rotating ring and stationary ring ) Huihan supplies ceramic seal rings with great mechanical properties which is widely used in pumps, valves, automotive engineering, and medical analysis equipment or even in the fully automatic coffee machines used in homes every day. Material: Pressureless sintered silicon carbide, reaction bonded silicon carbide, tungsten carbide Character: Exceptional resistance to corrosive and abrasive environments High temperature resistance
Water Pump Parts 1.4460 Mechanical Seal Wear Ring� Product Detail: Product: Wear Ring MX081001 Casting Material(Mat.): 1.4460, 1.4313 Gross Weight(G.W.): 6-80kg Standard: ASTM/DIN/JIS/BS Certification: ISO9001-2008 Processing: Heat treatment, Polishing, Sand blasting, machining processing Casting Process: Precision casting, Sand casting, Investment casting, Silica sol casting Casting Application: Transport equipment, Mining and Metallurgy, Engineering machinery, Medical equipment, electrical equipment, Food Machinery, Vacuum Equipment and other Industrial Unit Inspection Equipments: Spectrum analysis instrument, Metallurgical analysis, Tensile strength tester, Hardness tester, Roughness tester, deflection tester, Impact test machine, Altimeter, Scale Micrometer etc.� Company Advantage: * Sample request: Acceptable ( The sample charge is free if you have order) * Small order is acceptable for some maching parts( Can be negotatie) * Good quality with fast delivery * We have excellent design team for ODM/OEM order * We have 20 years rich experience focusing on this file which also establish the market in many Europe country and ect. * Main point: We can negotiate everything to try best to match our customer's request as "customer first " is the� principle in our company.
Pump Parts
Sintered and finish tungsten rings: Materials: virgin cemented carbide, tungsten carbide alloy and nonmetal Used in geological prospecting, machinery/tool manufacturing and serves as drill bit in wind drill and electric drills for coal digging Fit for precision lathe are used in nonstop cutting of die-cast iron Semi-precision, precision, and small-section precision lathes are used in interrupted cutting and whirling of rough turn; The grade, performance and application of carbide alloy. Pp bag, then carton or as special requirement.
Our products are mechanical seals, pump mechanical seals, auto mechanical seal, bellow mechanical seal, shaft mechanical seals, elastomer bellows seals, single spring seals, teflon wedge seals, pusher design seal, metal bellows seals, cartridge seals, etc. Shape (for gasket): serrated gasket Style: o ring Material: silicon Function: shaft sealing Standard or nonstandard: standard Product description Mechanical seal, for industrial pump, replace the mechanical seal of burgmann m7n 2. Materials: Stationary ring: silicon carbide, carbon, tc Rotary ring: silicon carbide, carbon, tc Secondary seal: nbr, epdm, viton Spring and metal parts: steel 3. Applications: clean water, sewage water, oil and other moderately corrosive fluids. We are a manufacturer in making pump mechanical seals, auto pump seals, water pump seals, cartridge seals, metal bellow seals and ceramic seal faces and rings, sintered sic(ssic) seal faces and rings, sic(silicon carbide) seal faces and rings, tungsten carbide(tc) seal faces and carbon or graphite seal faces and rings. Please email to request them if you need our mechanical seal catalogues. The catalogues with detailed dimensions of mechanical seals will be sent to you by email or by air.
