We Sell Vertical Wind Turbine Combined With Solar Panel To Make It An Environmental Power Generation System. A Power Generation System From Canada.
Rotor diameter: 3.2m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output Power: 1000W Maximum output power: 1800W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 2450KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 8.0m/s17.8mph Storm-stand: up to 50m/s Max rotate speed: 400r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Performance: Rated Power: 10kW Max Power: 12kW Rated Wind Speed: 2m/s Cut-In Speed: 2m/s Cut-out Speed: 25m/s Survival Wind Speed: 55m/s Physical Parameters: Mill Diameter: 6m Mill Height: 6.2m Mill Weight: 2375kg Tower Height & Weight: 5.5m(1000kg) Generator Parameters: Type: PMG 3 Phase Rated Voltage: AC250V Rated Current: 23A Protection Level: IP54 Controller Output: Output Voltage(On-grid): DC 50-375V Output Voltage(Off-grid): DC 110V Over Speed Protection & Braking System: Speed Control Style: Pitch Control System Brake Style: Automatic Hydraulic Brake Advantages of VAWT: Nearly Quiet Birds Friendly More Safety Features Wonderful Performance at Low Wind Speed Captures Wind from All Directions Longer Working Life Less Maintenance Less Requirements on Foundation Advantages over Other VAWT: High Efficiency Pitch Control to Govern Speed Automatic Hydraulic Brake 10KW: Performance: Rated Power: 10kW Max Power: 12kW Rated Wind Speed: 2m/s Cut-In Speed: 2m/s Cut-out Speed: 25m/s Survival Wind Speed: 55m/s Physical Parameters: Mill Diameter: 6m Mill Height: 6.2m Mill Weight: 2375kg Tower Height & Weight: 5.5m(1000kg) Generator Parameters: Type: PMG 3 Phase Rated Voltage: AC250V Rated Current: 23A Protection Level: IP54 Controller Output: Output Voltage(On-grid): DC 50-375V Output Voltage(Off-grid): DC 110V Over Speed Protection & Braking System: Speed Control Style: Pitch Control System Brake Style: Automatic Hydraulic Brake Advantages of VAWT: Nearly Quiet Birds Friendly More Safety Features Wonderful Performance at Low Wind Speed Captures Wind from All Directions Longer Working Life Less Maintenance Less Requirements on Foundation Advantages over Other VAWT: High Efficiency Pitch Control to Govern Speed Automatic Hydraulic Brake
Physical parameters: Mill diameter: 4 m Mill height: 4.6 m Mill weight: 975 kg Tower height & weight: 5.5m(650kg) Generator parameters: Type: pmg 3 phase Rated voltage: ac 250v Rated current: ac 11.5a Protection level: ip54 Controller output: Output voltage(on-grid): dc 50-375v Output voltage(off-grid): dc 48v/110v Over speed protection & braking system: Speed control style: pitch control system Brake style: automatic hydraulic brake Advantages of vawt: Nearly quiet Birds friendly More safety features Wonderful performance at low wind speed Captures wind from all directions Longer working life Less maintenance Less requirements on foundation Advantages over other vawt: High efficiency Pitch control to govern speed Automatic hydraulic brake 7 cubic meters, gross weight 1120kgs, net weight 995kgs A 40ft open top container can hold 8 units. (excluding the tower)
Extraction condensing steam turbine The extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines from the second admission valve chest it is possible to inject low pressure steam, available in the plant to supply the power required by the plant. These turbines are typically used for co-generation where the turbine meets both the power and steam demand of the process plant. In these type of turbines the power generated can be maintained more or less at a steady level despite variation in process steam demands. In some cases it may be necessary to have both bleed and controlled extraction steams from the condensing turbine. These turbines are of bleed cum extraction condensing type.
Turbines Manufactured For Atomic Energy Application Using Titanium Blades. We are manufacturing Steam Turbines with following range:- Back Pressure Steam Turbine Extraction Back Pressure Steam Turbine Condensing Steam Turbine Single Extraction Condensing Steam Turbine Double Extraction Condensing Steam Turbine Single & Multistage Steam Turbines Small Steam Turbines Ranging from 10 Kw
Manufacturer of World's Best Back Pressure Steam Turbines Upto 6 MW Range. We are manufacturing Steam Turbine with following range:- Back Pressure Steam Turbine Extraction Back Pressure Steam Turbine Condensing Steam Turbine Single Extraction Condensing Steam Turbine Double Extraction Condensing Steam Turbine Single & Multistage Steam Turbines Small Steam Turbines Ranging from 10 Kw
Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants, the turbine serves as a reducing station between boiler and the process steam header. These turbines can either be used for drive application (Sugar mill drives, Sugar fibrizor / Shredder drive, Pump drives and so on) or power generation application in which case the turbine drives the generator. These turbines are straight-back pressure type and find application where back pressure steam is fully utilized to meet process demands. The power generation is incidental to the process steam demand. The back pressure turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at intermediate pressures, This provision is applicable when the bleed (medium pressure) steam volume demand is low and pressure variations can be tolerated. These turbines are of bleed cum back pressure type. The back pressure turbine with one controlled extraction point is possible, this extraction steam is also used to meet process steam demand at intermediate pressure when volume demand is high and pressure variations cannot be tolerated. These turbines are of extraction cum back pressure type.
Product feature: 1.Low start wind speed and starting torque, high generating efficiency 2.Permanet magnet wind turbine generator, durable in use 3.Yaw motor system and pitch system, aerodynamic brake & manul brake 4.Glassfibre high efficiency blades 5.Simple construction, easy install and minimal maintenance 6.Service life is more than 15 years Plywood cases or according to your need
Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants, the turbine serves as a reducing station between boiler and the process steam header. These turbines can either be used for drive application (sugar mill drives, sugar fibrizor / shredder drive, pump drives and so on) or power generation application in which case the turbine drives the generator. These turbines are straight-back pressure type and find application where back pressure steam is fully utilized to meet process demands. The power generation is incidental to the process steam demand. The back pressure turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at intermediate pressures, this provision is applicable when the bleed (medium pressure) steam volume demand is low and pressure variations can be tolerated. These turbines are of bleed cum back pressure type.
The extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines from the second admission valve chest it is possible to inject low pressure steam, available in the plant to supply the power required by the plant. These turbines are typically used for co-generation where the turbine meets both the power and steam demand of the process plant. In these type of turbines the power generated can be maintained more or less at a steady level despite
Feed pump turbine drive packages are available from 100kw – 20mw. Complete steam turbine boiler feed pump packages are available, in addition to stand-alone steam turbine packages. 7 models, horizontal (axial and radial split), vertical , api 611- and 612-compliant, overhung and between-the-bearings wheel designs, metallic or carbon seals, electronic / hydraulic mechanical governors, customized steam path components, mechanical / electronic safety trip system, direct-drive or integral gear boxes with suitable lubrication systems.
Runner diameters: 0.8-3.3m Suitable water head: h=2-30m Suitable flow: q=1.62-53.6m3/s Capacity of the generator unit: 35-8700kw * it has large overflowing, good flow characteristic and high efficiency etc. Merits. * the runners are fixed or can adjust manual the efficient turbine of this kind can produce a large quantity of water flow which passes unimpeded. * all are horizontal type, the water enter into the turbine along the axial direction. * compared with vertical axle flowing type units, the factory building is little in excavating amount, and hydropower station water conservancy project investment can save 10%- 20%, equipment investment saves 5%- 10%. Every product, equipment, service and whole-system will be specially designed and customized according to each customer's or project's requirements. If you need us to design a proposal for your project, please send us your specific requirements now, our sales engineers will contact you the soonest.
Suitable water head: h=40-300m Suitable flow: q=0.35-1.166m3/s Capacity of the generator unit: 100-1250kw The speed range of the turbine: 600-1000rpm * its nozzle has a 22.5161227;angle with the runner rotation surface. * the runner is heavily pushed by water from pressure pipe that is switched to high speed jet flow through spray nozzle, imposing the runner in inclined direction. * the runner works by water flow entering one side of vane and coming out from its other side, pushing the runner to rotate, the runner then drive the generator through coupler to produce electricity. * it can reliably operate with simple structure, easy inspection and maintenance. * inclined jet type turbine has as simple structure as the pelton turbine, reliably operate with simple structure, easy inspection and maintenance. * it has the merit of high specific speed, wide application range, easy to coupling and direct connation to the generator. Addnew's inclined jet hydro turbines (turgo turbines) is one type of impulse turbine. It is well developed and widely used in mountain area.
Suitable water head: h=100-1000m Suitable flow: q=0.13-5.81m3/s Capacity of the generator unit: 200-20000kw The speed range of the turbine: 250-1000rpm * the runner works by being heavily pushed with jet flow that is switched through injection nozzle from high-pressure pipe. The feature is that is works by impulsing the runner to rotate with kinetic energy of water flow, and the jet center of nozzle and the runner are in the same plane. * it is divided into vertical type and horizontal type two kinds. Horizontal type each has 1-2 runner, each runner has 1-2 nozzle, vertical type each has only one runner, each runner has 2-4 nozzles.
Model Fzy1kw, Rotor diameter: 2.8m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 360r/min, Rated output power: 1kw, Max output power: 1500w, Output voltage: dc24v 48v/ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 2500kwh, Recommended accumulators: 12v150ah4pcs( 600ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 45kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box
Model: Fzy2kw, Rotor diameter: 3.2m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 320r/min, Rated output power: 2kw, Max output power: 3kw, Output voltage: dc48v 72v 96v /ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 5000kwh, Recommended accumulators: 12v200ah6pcs( 1200ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 80kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box
Model Fzy3kw, Rotor diameter 4m, Blades quantity 3 pcs, Blades material Frp (fiber reinforce plastic), Rated speed 260r/min, Rated output power 3kw, Max output power 4500w, Output voltage dc120-240v/ac110-240v, Start wind speed 3m/s, Rated wind speed 10m/s, Working wind speed 3-25m/s, Security wind speed 40m/s, Speed regulation Yaw& magnetic resistance, Charge control Aic (automatic intelligent control), Wind turbine type pmg (permanent magnet generator), Working temperature from -40 to +60, Annual average energy production 7500kwh, Recommended accumulators 12v200ah10 pcs( 2000ah ), Accumulators full charge time about 10 hours, Tower type pull wire tubular tower, Tower height 8m (optional), Weight 120kgs (without tower), Can supply power for air-condition. Refrigerator water pump. Electric cooker.Tv.Washer. Illumine. Fanner. Charge, Plywood box
Leo at qdfzy.Com Model:Fzy300w, Rotor diameter:2.2m, Blades quantity:3 pcs, Blades material:Frp (fiber reinforce plastic), Rated speed:400r/min, Rated output power: 300w, Max output power: 450w, Output voltage: dc24vor 12v/ac220v, Start wind speed:3m/s, Rated wind speed:8m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation:Yaw& magnetic resistance, Charge control:Aic (automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 750kwh, Recommended accumulators:12v100ah 1-2 pcs( 200ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower(optinal), Tower height:6m (optional), Weight:20kgs (without tower), Can supply power for: lighting, electric fan and charger, Plywood box
Leo at qdfzy.Com Model: Fzy600w, Rotor diameter: 2.5m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 400r/min, Rated output power: 600w, Max output power: 750w, Output voltage: dc24v/ac220v, Start wind speed: 3m/s, Rated wind speed: 8m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw& magnetic resistance, Charge control: Aic (automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 1500kwh, Recommended accumulators: 12v150ah2pcs( 300ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower(optinal), Tower height: 6m (optional), Weight: 40kgs (without tower), Can supply power for: color tv, lighting, electric fan and charger, Plywood box
