Railway Brake Shoes Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops. Specification Model LJ-TX Type Railway Brake Shoes Material Stainless Steel Dimensions (L x W x H) (mm) 300*300*150mm
NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Product Description Lithium Battery Rail Impact Wrench Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Specification Model LJ-LD81901 Type Battery Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 600*400*250mm Rated voltage (DCV) 18-36 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 18-36 Operating temperature range (-40 ~ 50) Torque control adjustable and controllable
Railway Brake Shoes Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops. Specification Model LJ-TX Type Railway Brake Shoes Material Stainless Steel Dimensions (L x W x H) (mm) 300*300*150mm
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description Lithium Battery Powered Rail Bolt Wrench Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
Product Description Lithium Battery Rail Impact Wrench Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Specification Model LJ-LD81901 Type Battery Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 600*400*250mm Rated voltage (DCV) 18-36 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 18-36 Operating temperature range (-40 ~ 50 ) Torque control adjustable and controllable
Product Description NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Lithium Battery Rail Impact Wrench Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Specification Model LJ-LD81901 Type Battery Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 600*400*250mm Rated voltage (DCV) 18-36 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 18-36 Operating temperature range (-40 ~ 50 ) Torque control adjustable and controllable
NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Product Description NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed 3900r/min Grinding stone inclination 0~90° Grinding stone feeding stroke 42mm Grinding stone specification 150x55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Product Description Lithium Battery Powered Rail Bolt Wrench Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
Product Description Lithium Battery Rail Impact Wrench Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Specification Model LJ-LD81901 Type Battery Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 600*400*250mm Rated voltage (DCV) 18-36 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 18-36 Operating temperature range (-40 ~ 50 ) Torque control adjustable and controllable
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
Place of Origin Hubei, China Type Rail switch grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Brand Name Linkage Product name Rail switch grinding machine for track maintenance function Rail switch point grinding Engine Honda GX270 Petrol engine Grinding wheel speed: â?¥3600r/min Feed adjustment accuracy: â?¤l0mm Weight â?¤117kg Rated power: 5.1kW Grinding wheel feeding stroke: â?¥80mm Grinding wheel rotation angle: â?¥30�° NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Place of Origin Hubei, China Type rail profile grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Brand Name Linkage Product name rail profile grinding machine Profile wheel span: 1000mm Engine 2 stroke petrol engine M165 Grinding stone speed: â?¥3900r/min Grinding stone feeding stroke: 42mm Fuel tank volume: 4.5L Feed adjustment accuracy: 0.125mm Power: 6.0kW Grinding stone inclination: 0~90�° Grinding stone specification: 150*55*70mm NGM-6.0 Internal Combustion Rail Profile Grinding Machine This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Moving Walk Way A moving walkway, also called a travelator, is a horizontal conveyor-belt-like transportation system commonly found in public places such as airports, exhibition halls, and shopping centers. It is designed to transfer individuals over short to medium distances efficiently. Capable of traveling at speeds of up to 1.5 meters per second, moving walkways provide a favorable and convenient mode of transportation. Features of Moving Walk Way Efficient Transportation System: Moving walkways offer a fast and efficient mode of transportation for individuals who need to move over medium to short distances within buildings. Adjustable Speed: The speed of moving walkways is adjustable, ranging from 0.5 to 1.5 meters per second, allowing passengers to choose their desired pace. Secure and User-Friendly: Moving walkways are equipped with safety features such as side barriers and sensors, ensuring the safety of passengers. They provide a comfortable and convenient way to move around public spaces, especially for the elderly or people with disabilities. Gallery of Moving Walk Way As one of the leading China passenger lift suppliers of moving walkways, we provide high-performance moving walkway solutions for a variety of public and commercial venues. Our moving walkways are well designed to effectively improve pedestrian traffic efficiency and reduce congestion. Our products undergo rigorous quality testing and meet international safety standards to ensure the safety of every passenger. As a China moving walk manufacturer, we will do our best to meet all the needs of customers.