Road Blocker Certified (With Crash Test) CKM Defense Hydraulic Road Blocker is the most widely used system in areas where entry and exit should be controlled and safe against all kinds of vehicle attacks, such as military facilities, government buildings, embassies, production facilities, oil refineries, hotels, airports, and stadiums. The system is specifically designed against vehicle impacts, and its components have been reinforced to be effective in all possible attack scenarios. Thanks to its hydraulic operating system, the CKM Defense Road Blocker System works continuously even in the busiest places. Additionally, CKM Defense Security Road blocker crash tested and certified for IWA 14-1:2013 / PAS 68 (K1) with anti-terror capability. This system synchronizes with other security systems such as swing barriers, rising bollards, etc., keeping the defense at the highest level in case of attack, while allowing authorized vehicles to safely enter the area. It can be integrated with all kinds of Access Control Systems such as Plate Recognition Systems, HGS (Electronic Toll Collection-Fast Pass) Systems, Card Readers. CERTIFIED (WITH CRASH TEST) TECHNICAL FEATURES IWA 14-1:2013 (N3D) / PAS 68-P1 Certificate (Under conditions of 12,375 kg vehicle with 80.9 km/h speed and 0.64 m penetration) Power: 380 VAC, 3-Phase, 50/60 Hz Length: 2111�±20 mm / 3111 mm �±20 mm / 4111 mm �±20 mm / 5111 mm �±20 mm / 6111 mm �±20 mm Height: 2950 mm �±20 mm Above-ground height: 1100 mm �±20 mm Under-ground part: 1350 mm �±20 mm Width: 1550 mm 20 mm Color-Paint: Yellow-Black (May be painted in different colors) Collision Unit: Steel sheet and NPU NPI steel bar construction Number of pistons: Double Wall thickness (Top part): 10 mm Wall thickness (front & side sheets): 6 mm Surface coating: Electrostatic paint Protection class: Sanding, primer surface paint Operating Time: 8-10 seconds Operating Capacity: 1000 times/day Engine Power: 5.5 kw, 380 VAC, 3-Phase Crash Level (Certified with crash test): IWA14-1 (PAS68, K12)-P1 crash rated Operating Temperature: -25 / 50�°C Operation Type: Hydraulic system Automation: 220 V two-way solenoid valve Hydraulic pressure: 80-120 Bars Hydraulic tank: 40 Lt
Steel Door Features Frames are made of 1.5 mm steel profile in accordance with steel door production and assembly standards. In terms of safety, this measure reaches a thickness of 3.5 mm. The frame structure is thought to be in the frame with the wall in draft. Our production is done on-site and with special measurements for each door. Door spans are 1.5 mm profile, security is 6.5 mm thick. The inside of the wing is supported by 0.70 mm sheet metal. All metal parts are in appearance with the desired material. The cold look of the metal and the system 8mm in the case and 8mm in the wing are thoughtful and warm style. For the wing, exterior cladding inner sheet and outer cladding furniture heat insulation material are used. Sound, heat, dust and great comfort with insulation and sealing quality. In door assembly, steel shafts that are the most assembly system and mounted on the wall or the appropriate welded method are used. The construction material made with this system almost forms an integrity with the wall. The search is removed from the service from deprecation, ensuring that the balance from use from a collection from the use wall from the dooring system does not deteriorate. Sites in the gate system. the only system is the lock system. If the lock is protection, the warranty period is 5 years. Except for the lock system, hard impacts and scratches, our doors are guaranteed for life. It can be turned in a way that cannot be turned with the lock. Lock cylinders are protected from the outside to the side and cut by hardened steel armor. Locks will be 3-turn monoblock locks in the middle and top as standard. Depending on the choice, 13 structural key door locks are used with a single key, among the so-called central. Quality 180 degree binoculars and door handles are used as standard on the doors. different so that colors and tips can be added. Section -1.2 mm Steel frame and door leaf -Static painted door frame and door leaf -Anti-Theft Trapeze Steel Plate on the door leaf -Rockwool Insulation (Sound Insulation-Heat Insulation) Lock system Turkish-made anti-theft lock system
METAL BODY Although the material thicknesses and types we use vary according to the customer's request, our company has a quality in its own standard. The main body of the wing body is 0.9 mm sheet metal, and 3 vertically bent sheet reinforcements of 0.9 mm and 1.5 mm sheet reinforcement are made to the hinge and lock part to support the sheet metal against heavy and strong impacts. METAL BODY SURFACE Laminate Coating Laminate is a flooring material obtained as a result of compressing papers impregnated with artificial resin solution by placing them on top of each other and compressing them with the hot pressing method. Laminate is an affordable and easy to install coating, so it is one of the most preferred coating methods. Laminate surface does not need varnish or varnish like solid wood. Wood Covering The patterns in the coatings change according to the tree species. Thus, the arts made on wood veneers are reflected in the furniture. It offers a different beauty thanks to its unique structure and texture. Due to the trees that grow in different species according to the region, the wood, which always provides unlimited design possibilities, takes its final form with wood coatings. Wood can be preferred in order to make your place more aesthetic. However, it is shown as one of the healthiest products due to its moisture balance. INSULATION AND INSTALLATION Ceramic Wool Ravatherm Ceramic Wool is a thermal insulation material consisting of long, flexible and interwoven fibers produced by spun (twisting and twisting) for applications between 750�°C and 1430�°C. Ceramic Wool; It is obtained by melting and combining aluminum, silica, zirconium raw materials at high temperature. Ravatherm Ceramic Wool blanket; It is used in industrial furnace insulation, in the insulation of boiler pipes and chimneys, in all kinds of technical insulations that require high temperatures.
Foundry Pig Iron is suitable for iron castings used in general engineering, machine tools and parts for the automotive industry. Due to the high proportion of iron ore used in the production of Foundry Pig Iron, the formation of pearlite in the finished casting is promoted. This effect is enhanced when more than 10% of Pig Iron per charge is used. The use of Foundry Pig Iron promotes graphite formation, reduces primary chill and improves machinability, particularly important in thin-walled castings The use of costly chill reducing inoculants can be minimised through increased addi- tions of Foundry Pig Iron. The high density and high carbon content of Foundry Pig Iron improves melting rates or reduces energy consumption. In an electric induction furnace savings can be as high as 50 kWh/t of molten metal. In a cupola furnace savings of up to 50 kg coke/t of molten metal can be achieved. The higher bulk density of pig iron relative to scrap means lower storage space re- quirements, less handling during charge make-up, fewer charge buckets and lower charging time. â?¢ The lower surface area : volume ratio relative to scrap means lower oxide (rust) for- mation and thus lower slag volume. The carbon content is chemically combined and thus goes into solution more quickly with lower energy requirement than when adding a recarburiser to scrap
Our tinctures are made using the classic tincturing method. The tinctures are made in a 1:4 ratio which allows for the optimal extraction of the herb. We have 50ml bottles (with a dropper), 100ml bottles (with a pipette) and a 1L bottle. Extraction ratio : 1/4 Ingredients: Alcohol, distilled water, and dried wild picked herb Alcohol volume: 50% We also offer a non-alcoholic version of our tinctures (with glycerine). Country of origin: Serbia Contact: balkan.herb@gmail.com In our online shop balkanherb.com you will find over 200 varieties of bulk dried herbs, herbal tinctures: PLEASE CONTACT US IF YOU HAVE QUESTION ABOUT ANY HERB! For larger quantities, contact us to negotiate a bigger discount. BalkanHerb is an online herbal store dedicated to helping people maintain and improve their health in an empowering and natural way. We at BalkanHerb have been a part of a culture that has been using natural herbs and herbal medicinals for ages. Our herbs are natural and never treated with any herbicides, pesticides or any chemical fertilizers. We often visit the local farmers we work with so we can witness the chemical-free environment in which our herbs are grown and make sure we provide the premium quality, healthy products. It is hard to find anything that can compare to the natural healing powers of herbs harvested in the pure fresh air in the chemical-free, breathtaking landscapes of the Balkans mountains. From following Good Agricultural and Collection Practices when we sustainably source our herbs locally in their natural environment, to using eco-friendly packaging, we do our share to ensure that our planet remains healthy.
Our tinctures are made using the classic tincturing method. The tinctures are made in a 1:4 ratio which allows for the optimal extraction of the herb. We have 50ml bottles (with a dropper), 100ml bottles (with a pipette) and a 1L bottle. Extraction ratio : 1/4 Ingredients: Alcohol, distilled water, and dried wild picked herb Alcohol volume: 50% We also offer a non-alcoholic version of our tinctures (with glycerine). Country of origin: Serbia In our online shop you will find over 200 varieties of bulk dried herbs, herbal tinctures: PLEASE CONTACT US IF YOU HAVE QUESTION ABOUT ANY HERB! please visit our website to see our herbal tinctures and teas. For larger quantities, contact us to negotiate a bigger discount. BalkanHerb is an online herbal store dedicated to helping people maintain and improve their health in an empowering and natural way. We at BalkanHerb have been a part of a culture that has been using natural herbs and herbal medicinals for ages. Our herbs are natural and never treated with any herbicides, pesticides or any chemical fertilizers. We often visit the local farmers we work with so we can witness the chemical-free environment in which our herbs are grown and make sure we provide the premium quality, healthy products. It is hard to find anything that can compare to the natural healing powers of herbs harvested in the pure fresh air in the chemical-free, breathtaking landscapes of the Balkans mountains. From following Good Agricultural and Collection Practices when we sustainably source our herbs locally in their natural environment, to using eco-friendly packaging, we do our share to ensure that our planet remains healthy.
Product Name- Outdoor Customized Motorized Waterproof Serge Fabric Somfy Motor Roller Vertical Blinds Zip Screens Category- Home>All Industries>Home & Garden>Home Decor>Blinds, Shades & Shutters Place of Origin- TURKEY IZMIR Brand Name- SKY ART Model Number- SKY 011 Accepted payment type- T/T Delivery Time- 15 days Nearest Port- Izmir , �°stanbul , Mersin Attribute Name1: Name and Value- Aluminum Alloy AL6063 T6 Attribute Name2: Name and Value- Single or Double TEMPERED GLASS Attribute Name3: Name and Value- AISI304-INOX Fittings Attribute Name4: Name and Value- CLEANABLE Special System FOB Currency- USD Unit- Piece FOB Price/Unit- Get Latest price Minimum Order Quantity- 1 piece Product Description- "Sky Art Mercury works vertically and transmits enough daylight to provide a cool and natural atmosphere and also provides exceptional protection against heat. Since Mercury is extremely weatherproof and practically maintenance free, once installed you can expect no additional costs. Depending on their colour, the translucent fabrics reflect the greatest part of the thermal radiation outside the window without sacrificing the outside view. You can thus ideally regulate the room temperature and still enjoy the spectacular views. Somfy Motor Serge Ferrari Fabric" Packaging and Shipping- As Per International Standard Shipping- International Shipping Exchange Policies- Free exchange for quality issues
Product Name- Outdoor Customized Motorized Waterproof Serge Fabric Somfy Motor Roller Ceiling Blinds Zip Screens Category- Home>All Industries>Home & Garden>Home Decor>Blinds, Shades & Shutters Place of Origin- TURKEY IZMIR Brand Name- SKY ART Model Number- SKY 012 Accepted payment type- T/T Delivery Time- 16 days Nearest Port- Izmir , Istanbul , Mersin Attribute Name1: Name and Value- Aluminum Alloy AL6063 T7 Attribute Name2: Name and Value- Single or Double TEMPERED GLASS Attribute Name3: Name and Value- AISI304-INOX Fittings Attribute Name4: Name and Value- CLEANABLE Special System FOB Currency- USD Unit- Piece FOB Price/Unit- Get Latest price Minimum Order Quantity- 1 piece Product Description- "Sky Art NEPTUNE works horizontally and transmits enough daylight to provide a cool and natural atmosphere and also provides exceptional protection against heat. Since Neptune is extremely weatherproof and practically maintenance free, once installed you can expect no additional costs. Depending on their colour, the translucent fabrics reflect the greatest part of the thermal radiation outside the window without sacrificing the outside view. You can thus ideally regulate the room temperature and still enjoy the spectacular views. Somfy Motor Serge Ferrari Fabric" Packaging and Shipping- As Per International Standard Shipping- International Shipping Exchange Policies- Free exchange for quality issues
Rising Bollards CKM Defense RISING BOLLARD CKM Defense High security automatic bollards are designed to prevent unauthorized vehicles access to secure areas and to provide the highest level of anti terrorism protection. This type of equipment is installed at areas of high risk sites of heavy vehicle attack such as military infrastructures, government institutions, or public places (stadiums, fairgrounds) etc. High security bollards are installed in either single or multiple units with an external hydraulic station and PLC, connected via the hydraulic hoses, besides the other type of our pneumatic air hoses. A separate push button control unit is supplied for manual control which is usually installed within the security office. This equipment can be easily integrated and interconnected with vehicle access control equipment such as arm barriers. have been preferred by most of the Municipalities for their Pedestrianization projects. CKM Defense Hydraulic & Pneumatic Rising Bollard has capability of working uninterruptedly for many years. It is being produced with stainless steel drawn steel pipes of European standards which has resistance to weather conditions and vehicle impacts. Those Rising Bollards prevent passage of unauthorized vehicles with it�¢??s strengthen internal structure. Those Rising Bollards could be manufactured with variable diameters and heights regarding to necessity of security requirements of related perimeter. Additionally, CKM Defense Hydraulic Rising Bollard have been preferred by most of the Municipalities for their Pedestrianization projects. TECHNICAL FEATURES Bollard Diameter: 220 - 273 mm Bollard Height: 500 - 700 - 900 - 1100 mm Wall Thickness: 8 - 16 mm Moving Part: Powder Coating / 304-316 Stainless Inner Sleeve: Hot-dip Galvanized Movement Mechanism: Hydraulic & Pneumatic Power Supply Three-Phase: 3ph AC 380V (�±10) 50/60Hz Operating Speed: 4-6 sec. Security Feature: Loop Sensor and Detection Systems Operating Temperature -25 C / +60 C
Concrete Batching Plants USC120 series Stationary Concrete Batching Plant provides high security. It recovers from quick and easy installation. In CE standards, students are the most used business tools in the industry with high quality and common. The parts of our Stationary Concrete Plant are designed with a minimum production facility on site. Concrete Batching Plants are sent internationally in the correct manner. TECHNICIAL SPECIFICATIONS Plant Capacity: 120 m Mixer Specifications Mixer Capacity: 3 m Dry Filling Capacity: 4500 liters Compacted Concrete: 3000 liters Motor Power: 2x55 Weighing Hopper Capacities Aggregate Weighing Capacity: 7000 kg Cement Weighing Capacity: 1800 kg Water Weighing Capacity: 1000 liters Additive Weighing Capacity: 30 liters Aggregate Hopper: Aggregate Compartment: 4-6 pieces Compartment Capacity: 30-40 m Total: 120-240 m Concrete Batching Plants USC120 Stationary Concrete Batching Unit Equipment: Aggregate Hopper: Weighing Belt: Transfer Tape: Aggregate Waiting Hopper Cement Weighing Hopper: Water Weighing Chamber: Additive Weighing Chamber: Compressed Air Installation: Twin Shaft Mixer: Mixer Chassis Moving Platforms and ladder Filter, Safety Valve and Accessories PC and Automation System: Cement Silo: Control Cabinet: Please CALL us for our other Concrete Batching Plants and customer-specific solutions
We are a used Tires and used Tires Scrap wholesaler in Germany. We are capable of producing 40000 tons of used car Tyre per year. We are ready to supply these Tyre in Bales which is to be shipped in one 40 FT HC container that can hold about 26 to 27 Tons. origin German Our experience as exporter of used tires in Germany goes back to 1989. All our secondhand car tires are well examined by sight and are in perfect condition. All tires are directly examined according to our high-quality standard at our suppliers in Germany. All part worn tires we sell are well inspected. We pick up old tires, arrange and mark all tires accordingly to the qualities we offer and sell only those tires and casings which are good for further use. Our quality standard is described in our price list. All used tires and casings are graded according to the needs of the buyers in the different tire markets worldwide. Our warehouse is located near Frankfurt am Main/Germany Please visit us in our warehouse after you have sent us a tire export inquiry AND we both agreed to start a profitable mutual business together. That means: We would like to invite costumers for secondhand tires to visit our warehouse in Germany which are able to buy one of the tire mixtures/compositions/ contingents we offer. We are very sorry, though, at present, it is impossible for us to invite everybody. Payment / Shipment Terms -30% in advance rest at Arrival Port Used Car tire 4mm to 8mm mixture from 10 Dollar to 16 Dollar Per Piece car used tires scrap Selling price $ 40/Ton all prices are Ex-works Warehouse Germany
We are a used Tires and used Tires Scrap wholesaler in Germany. We are capable of producing 40000 tons of used car Tyre per year. We are ready to supply these Tyre in Bales which is to be shipped in one 40 FT HC container that can hold about 26 to 27 Tons. origin German Our experience as exporter of used tires in Germany goes back to 2012. All our secondhand car tires are well examined by sight and are in perfect condition. All tires are directly examined according to our high-quality standard at our suppliers in Germany. All part worn tires we sell are well inspected. We pick up old tires, arrange and mark all tires accordingly to the qualities we offer and sell only those tires and casings which are good for further use. Our quality standard is described in our price list. All used tires and casings are graded according to the needs of the buyers in the different tire markets worldwide. Our warehouse is located near Frankfurt am Main/Germany Please visit us in our warehouse after you have sent us a tire export inquiry AND we both agreed to start a profitable mutual business together. That means: We would like to invite costumers for secondhand tires to visit our warehouse in Germany which are able to buy one of the tire mixtures/compositions/ contingents we offer. We are very sorry, though, at present, it is impossible for us to invite everybody. Payment / Shipment Terms -30% in advance rest at Arrival Port Used Car tire 4mm to 8mm mixture from 10 Dollar to 16 Dollar Per Piece car used tires scrap Selling price $ 40/Ton all prices are Ex-works Warehouse Germany
BFP-100 is a full automatic foam block compression and mattress packaging machine. It increases the manufacturing capabilities by reducing the required warehouse. Thanks to BFP-100, 4 times more buns, foam layers, rails can be shipped or stored with the same volume Increased shipping capability by reducing the volume down to 25% Minimized distortion on the foam by having flat pack only Increased storage and manufacturing capabilities Capable of packing buns of foam or large stacks of foam sheets Maximum product protection with advance compression control system Hydraulic compression system at infeed and outfeed sections Upper and lower conveyor at the pressing units to move the product under compression Less plastic consumption and tighter packs thanks to infeed compression system Moving infeed part of the machine with hydraulic cylinder to bring the compressed product to the outfeed section Double sealing lines for all sealers The highest consistency of sealing thanks to upper and lower heating system for all sealers Unique heat transfer system throughout the whole length of the sealing wires Advanced heat control system for the sealers Automatically adjusted sealer height according to compressed product height Advanced data collection and remote troubleshooting with OMRON Controllers (EtherCAT) Adjustable timings for each sealing process for perfect seal with respect to different thickness of tilm and compression amount Ability to give multiple foam pieces such as foam rails, layers, etc. Motorized hoist for easy plastic change.
White sharp flour obtained by separating finest endosperm parts (core) of wheat grain. Thus, white flour produces light and foamy dough, which is good for molding and has excellent properties for baking. All-purpose flour for leavened doughs is used to bake special and finest types of milk bread and pastries - such as nut rolls, poppy rolls, donuts, honeycombs or buchteln. The flour mixes exquisitely with fresh or dry active yeast, which increases the volume and lightness of the dough. We manufacture and constantly sell the next product: Product: Wheat flour type 400. Origin: Ukraine. Packing: Paper bags of 1kg/2kg/3kg/5kg (net) and also polypropylene bags 25kg/50kg (net). Private label is possible. Minimum order quantity: 1 20-ft container (23.5 tons net). Payment terms: T/T for smaller orders and L/C for large order. Delivery terms (according to Incoterms 2010): - FCA Ukraine; - DAF Ukrainian border (by rail in covered wagons of 68 tons net); - FOB port Odessa, Ukraine (in 20 ft sea containers); - CFR/CIF any destination city (by trucks). - CFR/CIF any sea port of destination. Inspection: All shipments are to be inspected (SGS), and tested before shipping by a world recognized authority as advised by the buyer. A buyer pays inspection (SGS). We are interested in new customers and long-term cooperation.
All-purpose wheat semolina or semolina flour is a product obtained from the central endosperm part with ash content of 0,45% relative to the dry matter. Through further technological process this product is sorted and cleaned on semolina sweepers and thus has exceptional particle purity and distinctive granulation inherent to the product. Product color is white and yellowish, depending on the content of colored pigments of the endosperm, which is a defining characteristic of this product. It is intended for production of various types of pastas. We manufacture and constantly sell the next product: Product: Wheat semolina type 400. Origin: Ukraine. Packing: Paper bags of 1kg/2kg/3kg/5kg (net) and also polypropylene bags 25kg/50kg (net). Private label is possible. Minimum order quantity: 1 20-ft container (23.5 tons net). Payment terms: T/T for smaller orders and L/C for large order. Delivery terms (according to Incoterms 2010): - FCA Ukraine; - DAF Ukrainian border (by rail in covered wagons of 68 tons net); - FOB port Odessa, Ukraine (in 20 ft sea containers); - CFR/CIF any destination city (by trucks). - CFR/CIF any sea port of destination. Inspection: All shipments are to be inspected (SGS), and tested before shipping by a world recognized authority as advised by the buyer. A buyer pays inspection (SGS). We are interested in new customers and long-term cooperation.
ICUMSA 45 1 Product/ Commodity: White Refined Sugar (ICUMSA 45) 2 Origin: Brazil and USA 3 Specifications: Fit for Human Consumption 4 Polarity at 20C: 99.80 Min. 5 Ash Content: 0.04% Max. 6 Moisture: 0.04% Max. 7 Solubility: 100% Dry and Free Flowing 8 Granulation: Fine 9 Icumsa: Max 45 ICUMSA, Attenuation Index Method No. 4 â?? 1978 10 Sediments: None 11 Color: Crystal Sparkling White 12 Crop: Correspondent for The Year in Course 13 So: Mg/Kg 20 14 Radiation: Normal International/Without Presence of Cesium or Iodine 15 Iodine: Certified 16 Smell: Free of Any Smell 17 Reducing Sugar: 0.010% Max 18 Substance: Solid Crystal 19 Max AS: 0.5 P.P.M. 20 Max OS: 2 P.P.M. 21 Max CU: 1 P.P.M. 22 HPN: Staph Aureus Nil 23 Mold & Yeast: UFC/10g 10 Maximum Cubed 24 Poisonous Seed/Husks: Phytosanitary Certificate of No Radiation, No Virus, No Insect Parts, No Poisonous Matter and Non â?? Genetic and Is Suitable For Human Consumption. PROCEDURE: 1. Prospective buyer sends an LOI or ICPO addressed to Seller 2. Seller Issues Full Corporate Offer FCO 3. Buyer signs and returns FCO with Bank Commitment letter BCL or ATV (Authorization to Verify) 4. Seller sends Sales and Purchase agreement (SPA) to buyer. 5. Buyer signs and returns the SPA 6. Seller sends the counter signed SPA to buyer. 7. Buyer issues SBLC within 15 days upon countersigned SPA to Seller bank as mentioned in the SPA 8. PB 2% 10 days after verifying the instrument 9. Within Twenty One Business Days Packaging, Inspection, Loading, and shipping commence. 10. Seller will send complete shipping documents to Buyer and Buyer's bank via email and DHL. 11. Within Five business days of the vessel's arrival at the discharge port, buyer's bank sends MT 103 wire transfer to Seller bank account as per SPA. 12. The procedure continues until complete quantity is shipped.
TECHNICAL SPECIFICATION OF 3.750 LITER DRUM LID OVERGROUND CONTAINER SYSTEM The overground container system lifts the container which the driver manages with the help of a remote control by getting off or on the vehicle from the lifting mechanism of the container with a crane on the vehicle which can be controlled by automatic and manual control and make the unloading on the vehicle by opening the lower hatches by means of a remote control. Overground container garbage capacity is 3,750 Lt. The container body measures at least 1750mm 1600 mm x 1600 mm . The body sheet of the container made of galvanized sheet in TS EN 10346 standard with a thickness of 2 mm and its resistance to impact and environmental conditions increased with electro-static dye . The upper body sheet of the container made of galvanized sheet in TS EN 10346 standard with a thickness of 2 mm its resistance to impact and environmental conditions increased with electro-static furnace paint. The edge of the overground container has been given strength by twisting the body sheets. The overground container system can be manufactured as end product or deassembled in order to reduct transport cost and prevent wear over time and also easy part changes On the front and back of the overground container, the drum system garbage disposal entry has made of 1.2 mm thick galvanized sheet in TS EN 10346 standard. Its resistance to impact and environmental conditions increased with electro-static furnace paint. Inox sheet(AISI 304) has been used for the entrance of the waste entry. It should be more sanitary, prevent scratching and provide an aesthetic view. The drum cover dimensions of the overground container is at least 400mm x 1100mm and the ground clearance is 1100 mm. The drum cap has gas piston for easily opening and closing. There is handle for held by the user. Body connection provided by a bearing. The rubber strip mounted on the bottom of the drum to prevent noise and odor to the from overground container cover ensure that the drum cover closes quietly and prevent any harm to users. Bolts used in the system is galvanized at least 8.8 quality (DIN 961 933) , nuts (DIN 985) is galvanized with fiber. The spigot lifting apparatus of the container is in the balance center of the container and installed at the top of the container by placing a lifting apparatus on the 50mm 50mm profile so that the lifting operations can be controlled by the operator from one point.
TIGON Single Needle Continuous Mattress Quilting Machine TIGON is a full automatic feeding system high speed single needle quilting machine for high end luxury mattress, home textile and upholstery works. TIGON performs the whole operations of feeding with motorized rollers, quilting and cutting the quilt in length. With the ability of quilting very different products, TIGON offers perfect quilting quality for all the products from very thin garment products to thick materials for mattress industry with multiple layers including foam, visco, memory foam, latex, polyester fiber, non woven, jacquard fabric, knitted fabric, leather and down fill. Your mattresses, headboards, comforters will overtop among others with the aspects of stitch quality, pattern designs, sustaining quality as well as your efficiency. Full automatic feeding, tensioning, quilting and cutting Minimum bobbin change with XXL spools (Durkopp Adler) Automatic thread cutting in less than 0,5 second Standard length & sides cutters High human security systems Brushless servo motors Automatic fabric measure control system with great accuracy Remote & Smartphone production monitoring system Electronic position controlled fabric width adjustment Easy pattern adaptation Flexible and user friendly software : EtQuilt. High quality sewing head: Durkopp Adler Max. Sewing speed: 3400 RPM // 21 m/min (according to the material filling) Max. Jumping Speed: 60 m/min Max. Stitch area: 2.20 x 2.60 Max. Fabric width: 2.45 m Suggested needle size: 120-160 (material dependent) Number of feeding rolls: 5 (options are available upon request) Stitch length: 1-10 mm (may change according to the material filling) Automatic upper and lower thread cutting system Max. Thickness: 9-10cm (material compressibility dependent) Stitch type: Lock-stitch Automatic integrated panel cutter in length Advanced Side Cutters Automatic lubrication for the sewing head as hook and needle part Statistical production graphics Immediate error solving with visual error display Online consultation with ElektroCARE system Reliable OMRON controllers Optical barriers for human safety Durable FESTO pneumatic system with low air consumption No need for repair machine thanks to ability to start from the desired point. No need to draw again for scaling, rotating and arraying Motorized width adjustment of the clamps for different fabric width Automatic measuring of the physical maximum area of sewing to double check with the active pattern design Pattern Design Preparing Software is Included.
HEMMER Automatic Panel Hemming Machine One of the most time consuming part of mattress production is flanging the quilted panel. With the higher demand on thicker mattress panels, overlocking of the panels became inevitable, because it becomes impossible to sew the thick panel by the tape edging. However, the conventional flanging process brings a lot of labor and inaccurate end sizes of the panel. Full automatic process Two Working Modes: Synchronized with your existing quilting machine Feeding the roll of quilt Side and Length Cutting and Sewing 4 needle double chain-stitch heavy duty sewing unit (right and left sew ing head) 4 needle double chain-stitch heavy duty sewing unit (cross sewing head) Adjustable width and length of the quilt Adjustable distance between left and right head with motor Wide range of quilt thicknesses Material exit with conveyor Automatic thread cutting Accurate finishe measures of the quilts Automatic side-waste removal system to the reserve High safety systems Servo driven system User-friendly software Easy tape edging of the quilt after closing Online maintenance and training service One HEMMER has the capacity of 5 flangers. There is no panel cutter needed The finish size of panel after flanging may end up with high tolerances while it is always accurate with the HEMMER Ability to use as panel cutter only Unlike conventional panel cutters; with the new HEMMER, there is no possibility of skipped stitches at the cutting edge, since the hemming is before the cutting Your tape edging is more fluffy with the HEMMER. The overlocking completely closes the edge of the material while hemming keeps your panel edge open to make the tape fluffy Ability to adapt the HEMMER with any existing multineedle quilter. High quality chainstitch sewing heads Max. Speed: 20-22 seconds per panel (may change according to the filling) Max. Material thickness: 7.5 cm (may change according to the compressibility of the material) Number of sewing heads: 3 Max. Quilt width: 2.50 m Min. Quilt width: 1.40 m Min. Quilt length: 75 cm Automatic thread cutting Automatic side waste removal system Full automatic process with 4 sides cutting and hemming 4 needle chain-stitch sewing head for the transversal cutting and sewing Ability to adapt any multineedle quilter Ability to work with pre-quilted material Ability to set up timing of the looper-needle adjustment without any mechanical setting Reliable OMRON Sysmac Controller Ability to use as panel cutter only Durable FESTO pneumatic system with low air consumption Product video link : https://www.youtube.com/watch?v=aD9dB_5UONA Product video link : https://www.youtube.com/watch?v=KaPEo4Dl2U4
CKM Defense Road Blocker CKM Defense Hydraulic Road Blocker is the most widely used system in areas where entry and exit should be controlled and safe against all kinds of vehicle attacks, such as military facilities, government buildings, embassies, production facilities, oil refineries, hotels, airports, and stadiums. The system is specifically designed against vehicle impacts, and its components have been reinforced to be effective in all possible attack scenarios. Thanks to its hydraulic operating system, the CKM Defense Road Blocker System works continuously even in the busiest places. This system synchronizes with other security systems such as swing barriers, rising bollards, etc., keeping the defense at the highest level in case of attack, while allowing authorized vehicles to safely enter the area. It can be integrated with all kinds of Access Control Systems such as Plate Recognition Systems, HGS (Electronic Toll Collection-Fast Pass) Systems, Card Readers. TECHNICAL FEATURES Unit operating voltage: 380 VAC, 3-Phase, 50/60 Hz Length: 3111 mm, 4111 mm,5111 mm, 6111 mm �±20 mm Height above ground: 780 mm �± 10 mm The part buried under the ground: 1050 mm �±10 mm Width: 1350 mm �± 10 mm Color: Yellow Black Painted (RAL 1028, 9005) Collision unit: Steel Sheet and NPU NPI steel bar construction Wall thickness: 10 mm Surface coating: Electrostatic painted Corrosion coating: Shot blasting, epoxy under coating, electrostatic painted Turn On/Off Time: 4-6 sec. Emergency Take Off Feature: 2-3 sec. (optional) Turn On/Off Capacity: 1000 / day Power Engine: 4 kw or 5 kw , 380 V AC, 3-Phase Operating temperature range: -25 / 60 C Work System: Hydraulic system Hydraulic piston: 2 qty Hydraulic power unit: Industrial hydraulic pump, oil level and temperature gauge, manual hand pump Automation routing: 220 V two way solenoid valve Hydraulic pressure: 40-80 Bar Hydraulic tank: 30-50 liter Hydraulic hose: R2 3/8 330 Bar hose Hydraulic oil: 46 no. hydraulic oil Hydraulic system heating/cooling: Oil heater/cooler (optional) Control Cabinet: Cabinet Dimension: 900 x 900 x 700 mm (height, length, depth) Control System: Remote control,button control (optional), access systems (optional) Control Panel: Compatible with PLC base control, micro process control card, access systems devices (Access card, plate recognition system, finger print reader etc.) Manual Usage: Manuel hand pump, Warning Equipment: Warning light (optional), traffic lamp (optional), sound warning (optional) Protection System: Loop detector, photocell (optional) Drain pump: Optional concrete Infrastructure: C 35 concrete Power failure working status: Battery (optional)