Lateral Test and Seal Packers Logiball 2001L packers are used to test and seal off infiltration in sewer laterals, from the mainline, without any access to cleanouts. The lateral grouting plug is inverted and deployed into the lateral from the mainline packer assembly. The mainline sleeve then expands to create a minimal grout mixing chamber. The grout is pumped and migrates freely along the restricted expansion of the lateral plug and out through existing pipe defects into the surrounding bedding to seals defects, leaving only a thin layer of grout in the lateral. The packers are available with different void pressure monitoring systems; a conventional localized liquid filled sensor (S), recommended for acrylamide and acrylate grouts, an in-wall water chamber sensor (W), recommended for stickier grouts such as urethanes and polyurethanes, or both systems (S+W) for a more versatile use. The 2001L Lateral Packer comes standard with two grout ports and a third port dedicated for the test medium (air or water). 2001L Lateral packers work best with a five-hose system. Lateral Grouting Plugs can be interchanged in a matter of minutes to grout distances up to 30 feet if necessary. Lateral Grouting Plugs are available for 4, 5 or 6 diameter laterals. Flexible housing extensions are needed for lateral grouting plugs 24 or longer. ICGA promotes the proper use of chemical grouting as a safe, economical and effective means to reduce ground water infiltration into sewer collection systems. The 2001L model is available for 6â?³, 8â?³, 9â?³, 10â?³, 12â?³, 15â?³, 18â?³, 21â?³, 24â?³ and 30â?³ mainlines. For larger diameter contact our sales department. For larger diameters, see our Man Entry Lateral Packers for 36â??â?? & up or contact our sales department. Features * As measured on the rubber. Specifications subject to change without notice. Logiball Lateral Packer Approximate Void Volumes. View list of parts for the lateral packers 2001L. (pdf file) A Control Panel is available to operate the lateral packer from the truck.
ASTM B163 is the Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-exchanger Tubes. This covers outside diameter and average wall, or outside diameter and minimum wall tube. The tube shall be furnished in the alloys and conditions defined by this specification. The ASTM B163/ASME SB163 material shall conform to the composition limits of nickel, copper, molybdenum, iron, manganese, carbon, silicon, chromium, aluminum, titanium, phosphorus, cerium, and zirconium, yttrium, boron, cobalt, columbium, tungsten, and nitrogen specified. Tensile strength, yield strength, elongation, and Rockwell hardness of the material shall conform to the required Mechanical Properties set by this specification. Test methods such as chemical analysis, tension, rounding procedure, Rockwell hardness, grain size, and hardness conversion shall be performed for qualified ASTM B163/ASME SB163 alloy tubes. ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE PROVIDED BY YUHONG ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube The most popular materials under ASTM B163 Standard are: UNS N04400(Monel 400); UNS N06600(Inconel 600); UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT); UNS N08825(Incoloy 825). Incoloy 800/N08800 Nickel Alloy Pipe/Tube Incoloy 800H/N08810 Nickel Alloy Pipe/Tube Incoloy 800HT/N08811 Nickel Alloy Pipe/Tube Incoloy 825/N08825 Nickel Alloy Pipe/Tube Inconel 600/ N06600 Nickel Alloy Pipe/Tube Inconel 601/ N06601 Nickel Alloy Pipe/Tube Monel 400/N04400 Nickel Alloy Pipe/Tube Nickel 200/N02200 Nickel Seamless Pipe/Tube ASTM B163/ASME SB163 Nickel Alloy Pipe/Tube ASTM B163/ASME SB163 NICKEL ALLOY PIPE/TUBE FEATURES Nickel alloys tube under ASTM B163 can meet the High Strength and corrosion resistance in a range of media including sea water, hydrofluoric acid, sulphuric acid, and alkalies. ASTM A163 Coiled Tubing is highly resistant to corrosion in different environments. This tubing enables the speed of the operation to be fast at the same time, it is very safe and easy to run. ASTM B 163 Tubing is used in applications for drilling, logging, fracturing, perforating, and production operations. These tubings have a lower environmental impact. If you are looking for a reliable ss pipe company, don't hesitate to contact us!
Background Plastic films and sheets are typically made by melting polymer material and then shaping it through processes like extrusion or calendaring. During this production, the material is stretched in the machine direction, and as it cools, some internal stresses remain. When reheated, these stresses can cause the material to shrink, altering its dimensions. This shrinkage is crucial for quality and process control in plastic manufacturing. It helps assess process consistency, adjust production parameters, and understand material characteristics. Industries like packaging rely on shrinkage data to ensure precise fit after heat exposure. In essence, shrinkage is a key factor in maintaining product quality and process efficiency in plastic film and sheet production. Application The FST-01 Film Free Shrink Tester is used to measure the unrestrained linear thermal shrinkage of plastic film and sheets at specified temperatures in a fluid medium. This device helps assess how much these materials will shrink when exposed to heat in real-world applications. Test Process 1. Temperature Setup and Stabilization: Set the temperature on PID controller and the fluid is heated to a preset temperature and temperature is stabilized. 2. Specimen Preparation and Submersion: Mount the test specimen into the free shrink holder. Submerge them together into the liquid bath. 3. Time Monitoring and Completion: The timer starts to count down and when the test time is reached, an alarm will beep, signaling the end of the test. 4. Test Conclusion: Carefully remove the test specimen from the liquid bath. Press the Stop button on the tester to mark the conclusion of the test. 5. Shrinkage Measurement and Assessment: Treat test specimen in ambient environment and Measure the linear shrinkage of the specimen. Calculation To calculate the unrestrained linear shrinkage percentage using the given formula: Unrestrained Linear Shrinkage (%) = [(Lo - Lf) / Lo] x 100 Where: Lo = Initial length (100 mm) Lf = Length of the side after shrinking Technical Features 1. Precise P.I.D. temperature control 2. High-precision timer 3. Alarm capability 4. Consistent fluid medium heating 5. Inclusion of a standard square metal clamp and a free shrink holder 6. Equipped with an oil bath cover Standard: ASTM D2732 Main Parameters Sample Size â?¤160 mm x 160 mm Temperature Range Ambient ~ 200C Accuracy ±0.3 C Dimension 37*44*28 LWH cm Power Supply 220V 50Hz
Description: The Micro Drilling products cover semiconductor materials, metals, ceramics and polymers. Each product has laser and beam delivery design optimized for a specific application, and can be configured for manual or automatic operation, allowing customers to buy exactly the application solution they need. PCD Micro Drill is used in the Semiconductor industry, National defense field, Aerospace, Chip & Communication electronics, Details Specificationï¼? PCD MICRO DRILL SLOT STRUCTURE AND DRILL TIP 1. The grinding groove is smooth and the chip removal is excellent; 2. The edge surface is polished and the main edge is sharp; 3. The tip rotates stably and the hole position is accurate The Micro Drilling products cover semiconductor materials, metals, ceramics and polymers. Each product has laser and beam delivery design optimized for a specific application, and can be configured for manual or automatic operation, allowing customers to buy exactly the application solution they need. PCD MICRO DRILLS FEATURES 1. PCD micro drill has characteristics of high hardness, wear resistance, and relatively long service life compared with traditional alloy microdrill; 2. PCD micro drill is widely used in addition to processing metal materials, and can also be used for inorganic non-metallic material processing, with high processing precision; 3. PCD micro drill, compared with traditional alloy micro drill, can process hole walls with better quality. Improved Tool Life Improved Productivity Improved Hole Quality Reducing Your Machining Time PCD MICRO DRILLS STANDARD Highest technology laser manufactured micro PCD drills. Micro PCD drills are used in the semiconductor industry for monocrystalline applications such as cleaning and inspection jigs. They are also used for the graphite electrode manufacturing for EDM and drilling very hard to machine materials in the die & mold industry. Designed with superb surface quality and edge sharpness. Multiple scale tool life as compared to standard carbide coated micro drills. Other dimensions are available per request. Models: Applications of High Precision Micro PCD Drill: Micro Drilling Systems are used in the microelectronics, microfluidics, semiconductor, LED, medical devices, and PV industries. The systems combine precision part-moving stages, high-resolution alignment systems and application-optimized lasers with IPGs proprietary software to provide high-throughput and high drilling accuracies. Application Cases of High Precision Micro PCD Drill : Advantages of High Precision Micro PCD Drill: Pack: Cartons and bubble wrap Payment: TT; Paypal; Delivery Time: Seven to ten days Sample: No free samples are provided Certification: ISO9001:2008 FOB Port: Shanghai Qingdao Guangzhou
Material: Virgin wood pulp/recycled waste pulp GSM: 80gsm-750gsm. Features: Uniform color, no color migration, no white spots on the surface, colorfast, stable color, all black, glossy/matt black, fine paper, good stiffness, anti-curling , good tensile, good hardness, good strength, high rigidity, high resistance to breakage , no fading, smooth and flat paper surface, good folding resistance, printable on one/both sides DIVERSITIES Based on raw material: 1.Virgin Black Paperboard-80gsm-700gsm, made of pure virgin wood pulp, uncoated, with super stiffness, smoothness, evenness and tensile 2.Recycled Black Paperboard-made of recycled waste pulp, with comparatively lower physical performance but more environmentally friendly Based on color: 1.Both/Two/Double sides dyed Black Paperboard-80gsm-700gsm, no color variation on both shades, inner layer is also black 2.Single/One side dyed Black Paperboard--80gsm-750gsm, top shade is dark black while back shade is lighter, inner layer is black 3.Grey Back Laminated Black Paperboard-180gsm-750gsm, black paper laminated with gray boards on one or both sides. 4.Painted Black board--gray board painted black and laminated to different thicknesses with a gray board Application: 1.Stationery packaging: photo frame, book cover,name cards, notebook, photo/stamp album, file folder cover, writing board, desk calendars etc 2.Gift packacing, cosmetics boxes, iewelry boxes, high-standard perume boxes, shoe box, telephone boxes, handbags, and handicralt boxes er 3.Food packaging: tea, moon-cake, wine, liquor etc 4.Garment: gamment label, swing tag, hang tags, shirt board, shopping bag and hangers etc 5.Advertisement: bilboard, shopwindow display, display stand and photoelectric backplane etc 6.Electronics: electronic gasket, speaker gasket, loudspeaker box, trumpet back-up plate and sound velar etc 7.Home decoration: background wall, painting frame and furniture etc 8:Luxury packaging,shoe boxes,shopping bags ect. Packaging & Shipping Packing: Ream packing & sheet packing & roll packing, packed with PE film and Kraft paper Shipping: Methods: Sea freight & air freight & land freight Time: About 20-30days Loading capacity: 15 tons of 20GP, 25 tons of 40GP depends on the roll size and sheet size Leading port: Ningbo port Trade term: CIF, FOB NINGBO Payment term:T/T+ LC
CLAIREX Bathroom Cleaner â?? the ultimate solution for maintaining a spotless and hygienic bathroom. Specially formulated to tackle the unique challenges of bathroom surfaces, CLAIREX leaves your bathroom sparkling clean, fresh, and inviting. Key Features: Effective Stain Removal: CLAIREX Bathroom Cleaner is powered by a potent formula that effortlessly removes tough stains, soap scum, and watermarks from various bathroom surfaces. Enjoy the satisfaction of a pristine bathroom with minimal effort. Germ and Bacteria Defense: Take cleanliness to the next level with CLAIREX's germ-fighting capabilities. This bathroom cleaner is designed to eliminate common household germs and bacteria, ensuring a hygienic environment for you and your family. Long-lasting Freshness: Infuse your bathroom with a lasting, clean fragrance. CLAIREX Bathroom Cleaner not only cleans but leaves behind a refreshing scent that lingers, creating a pleasant and inviting atmosphere in your bathroom. Versatile Use: From sinks and countertops to tiles and shower walls, CLAIREX Bathroom Cleaner is suitable for a variety of bathroom surfaces. Its versatility ensures that your entire bathroom receives a thorough and effective cleaning. Quick-Drying Formula: CLAIREX understands the importance of efficiency. The quick-drying formula allows you to enjoy the results of your cleaning efforts sooner, making bathroom maintenance a convenient and swift process. Easy Application: The ergonomic spray bottle design makes CLAIREX Bathroom Cleaner easy to apply precisely where you need it. Target specific areas or cover larger surfaces effortlessly, ensuring a thorough and even application every time. Environmentally Friendly: Committed to sustainability, CLAIREX Bathroom Cleaner is formulated to be eco-friendly. It is free from harsh chemicals, making it safe for both your family and the environment.
Crankcase: Precision cast oxidation treated surface of the crankcase. High and low pressure water seal components: The high and low pressure water seal design of the "U"type special material enhances the performance of the water pump and improvesits service life. The plunger support guide ring ensures the coaxiality of theplunger, extending the service life of the water seal and plunger. Pump head assembly: Selected stainless steel material, new and efficient structuraldesign, high strength, no pores, long service life, and safe operation.Reinforced 8-bolt fastening, 18mm, grade 12.9. Check valve assembly: The valve cage is made of special materials that are sturdy anddurable. The stainless steel poppet valve and spring extend its service life.The disassembly and assembly of one-way valve components is simple and easy tomaintain. Pommel: Precision machined hard solid ceramic plungers, as well asthickened SST limit bolts, provide longer service life, better durability andapplicability. Bearing: Large tapered ball bearings ensure the concentricity of thecrankshaft connecting rod and ensure stable operation of the water pump. Bearing Block: Precision machining ensures coaxiality and concentricity. Crank axle: Precision forging process and hardening treatment ensure thestrength, service life, and durability of the crankshaft. Oil viewing window: The oil viewing window located behind the water pump isconvenient for checking the oil level and easy to repair. Precision die-castingand high-quality sealing rings ensure the sealing effect of the rear cover. Oil seal and O-ring: A better crankcase oil sealing system, with stainless steelsprings for oil seals to ensure sufficient tension. Plunger connecting rod: Super strong alloy material, split structure, higher loadstrength, longer service life, ensuring safe and stable operation. Liquid inlet medium: Acidity, alkalinity, temperature 85 .
Hangzhou Yanpa Cosmetics Co.,Ltd is a subsidiary company of zhejiang cosmetics manufacturer in China which supply OEM and ODM for makeup brands. We have been specializing in the R&D and production of cosmetics for 14 years. The production base covers an area of more than 32,500 square meters, the first phase has been put into use more than 12,500 square meters, the factory has more than ten modern production lines, 10,000 class dust-free purification laboratory, 100,000 class dust-free purification workshop, imported test and manufacturing equipment, international standardized production management. Our factory has 14 modern production lines, 10W class super purification production workshop, 1W class dust-free purification laboratory, 10W class dust-free purification filling workshop, full central air conditioning system, imported testing and manufacturing equipment. R&D database already has tens of thousands of proven formulas. It also has three independent workshops for skin care, color cosmetics wax base and color cosmetics powder. The factory adopts international excellent management standards to achieve precise, efficient and process-oriented management; perfect quality management and strict testing system ensure the quality of final products, improve product quality while reducing unit energy consumption,achieve energy saving and emission reduction, and implement the company's environmental protection concept to build a green enterprise. With GMPC and ISO22716 certifications, and welcome new formula manufacturing for your beauty industry. Our OEM & ODM Color Cosmetics Products are mainly following: eyeshadow palette, liquid eyeshadow, eyeliner, mascara, eyebrow, lipstick, lip gloss, lip balm, lip liner, lip scrub, foundation, concealer, contour and bronzer, blush and highlighter, powder, nail polish and make up tools etc.
COMPANY PROFILE QUANZHOU TOGETHER ECO TECH CO.,LTD� are devoted to� Popularize 100% Recycled and Biodegradable Non-woven fabric, Provide quality solutions and customer satisfaction through valued-added products and services. biodegradable materials PLA SPUNBOND NON WOVEN FABRIC PLA meltblown nonwoven fabric PLA/PET/RPET SPUNLACE NON-WOVEN RPET Spun-bond nonwoven fabric PET spunbond non-woven fabric RPET stitchbond non woven fabrics SMS/SMMS/SSMMS NON-WOVEN FABRIC FACE MASK.DIAPER.MEDICAL PRODUCT MATERIAL RPET stitchbonded nonwoven bag PLA non woven shopping bag RPET spunbonded non-woven bag What is polylactic acid (PLA)? PLA is not plastic. It is derived from nature. Starch is extracted from plants such as corn and cassava and fermented by microorganisms to produce lactic acid. Lactic acid undergoes an advanced polymerization process to produce a 100% green and safe new polymer material called polylactic acid (PLA). Products made from this material are healthy and safe, non-toxic and odorless, and have no harm to the human body. In addition, if the product is discarded under composting conditions, it can be completely decomposed by microorganisms, eventually generating carbon dioxide and water, and returning to nature. The environment does not cause any pollution, so PLA is recognized as a â??green materialâ?? for low-carbon environmental protection and sustainable development in the 21st century. PRODUCT DESCRIPTION Material: 100% Polylactid Acid Technics : Spunbonded� Weight:� 10-250GSM Width: 160-300-320cm or customized Color:� customized MOQ:� 1tons/white, 5tons/other color Special Process: with UV/Laminated(PP+PE) / Printed /Hydrophilic/pre-cut/Fire treatment Hard or soft finition with nice and shinny surface Main Uses (1) medical and health care cloth: surgical clothing, protective clothing, sterilizing cloth, mask, diapers, sanitary napkin, etc; (2) home decoration fabric: wall cloth, tablecloth, bedspread, bedspread, etc; (3) follow the cloth: lining, bonding,, shaping cotton, various synthetic leather soles, etc; (4) industrial fabrics: filtration materials, insulating materials, cement packaging bags, geotextiles, covering cloth, etc; (5) agricultural cloth: crop protection cloth, seedling cloth, irrigation cloth, thermal insulation curtain, etc; (6) other: space cotton, thermal insulation materials, linoleum, cigarette filters, bags and tea bags, etc.
Something About Art Paper: Raw Materials:The main raw materials of coated paper are cooper plate base paper and coating. Copper plate base paper with bleached chemical wood pulp or with pant of the bleached chemical pulp, bleached chemical straw pulp on the paper machine made by copying. Copper base paper must have uniform thickness small scalability high raw material strength, god water resistance. Paper surface is not allowed to have snots wrinkles holes and other paper diseases, used for coating coating is composed of high quality white pigment (such as kaolin, calcium carbonate, etc., adhesives (such as latex,starch, polyvinyl alcohol, etc.) and auxiliary additives (such as gloss agent, hardener, plasticizer, etc.) Produce Way: Will be composed of high quality white pigment. adhesives and auxiliary additives and liquid days of high solid content of the coating.through the coating machine thin and uniform coating on copper plate base paper, and then dry, roll into a roll on the paper rolling machine, and then by the super calender for calender finishing. Key performance: 100% virgin pulp, High printing gloss, Smooth printing surface High brightness and gloss, Excellent brightness and smoothness Competitive stiffness and caliper ,True color reproduction Specification: Paper Type: Art Paper/Art carg Coating: Coated,Kaolinite,Double Side Compatible Printing: Offset printing Feature: Anti-Curl Pulp Material: Wood Pulp Pulp Style: Virgin Pulping Type: Chemical-Mechanical Pulp Place of Origin: China Custom Order: Accept Size : 889*1194,787*1092,880*730,700*1000 or width >600mm in reel size.And customized size Usage: Book Cover Grammage: 85-400 gsm Thickness: ISO 65-451 um Brightness: ISO 90-92% Glossy: ISO 70% MOQ: 25 MT Whiteness: Glossy:70�±2% Matte:20-28% Packing & Delivery Offset Paper In Reel in sheets or in rolls if sheets,100sheets/ream, then reams/pallets 1*20 ft container can load in about 16 tons 1*40HQ container can load in about 22 tons End-use Printing Magazine,Book,Catalogue,Poster,Annual report,Calendar,Brochure,Advertising post card,Certificate etc.
Slurry pump accessories flange usually refers to several fixed holes opened around a disk-like metal body for connecting other components. Flanges are widely used in various mechanical equipment and pipeline connections. There are also many types of flanges. Next we talk about the standard system of flanges. my country's national standard system for steel pipe flanges GB. 1. Nominal pressure: 0.25Mpa~42.0Mpa Series 1: PN1.0, PN1.6, PN2.0, PN5.0, PN10.0, PN15.0, PN25.0, PN42 (main series) Series 2: PN0.25, PN0.6, PN2.5, PN4.0 Among them, the flange sizes of PN0.25, PN0.6, PN1.0, PN1.6, PN2.5, and PN4.0 belong to the European flange system represented by German flange, and the rest are American flange sizes. The American flange system represented by Lan. In the GB standard, the maximum nominal pressure level belonging to the European flange system is 4Mpa, and the maximum nominal pressure level belonging to the American flange system is 42Mpa. 2. Nominal diameter: 10mm~4000mm 3. Structural form of flange: Integral flange Unit flange threaded flange; Welding flange, butt welding flange; Flat welding flange with neck, socket welding flange with neck, plate flat welding flange: loose sleeve flange, loose sleeve neck flange with butt welding ring, loose sleeve plate flange with butt welding ring, loose sleeve flat welding ring Plate flange, plate over loose flange Flange cover (blind hole flange). 4. Flange sealing surface: flat surface, concave surface, concave and convex surface, tongue and groove surface, ring connection surface If you want to know more about slurry pumps, please call Pansto Pump Industry! Shijiazhuang Pansto Pump Industry is a manufacturer of slurry pumps in Shijiazhuang. It mainly designs, manufactures and sells slurry pumps and accessories. Mainly engaged in mud pumps, submersible pumps, foam pumps, desulfurization pumps and many other series. Single-stage slurry pump, slurry pump diagram, slurry pump curve, slurry pump specifications Slurry pump brand Warman slurry pump ZJ slurry pump ZGB slurry pump AH slurry pump SP slurry pump vertical liquid slurry pump
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.
Cotton/woollen/jute/rayon saneel leather durries, prayer mats, bed covers, cushion covers, embroidered wall hangings of holy quotations/jewel carpets.
Plant Type:Grass Material: PP +PE Gauge:3/16,3/4",3/8", Pile height:10-40mm Density:14700 tufts/square Meter Backing:PP+ Net+ SBR Latex Size:4*25m/2*25m Application:Garden,Outdoor,Leisure,landscape, Usage:Multi-use like Hotel, Restaurant, Playground, Soccer, Backyard, Porch, Tennis, Terrace, Residential Material:Plastic
Manufacturing Process: Woven Incarporated Pile Construction: 100% PP Heat Set Pile Height: 8 mm Pile Weight : 1265 gms/m2( 37 Oz/ Sq. Yd.) Total Weight: 1982 gms/m2( 58 Oz/ Sq. Yd.) Construction: 320X420 Backing Finish : Incorporated Latexed Finish with High Quality polypropylene /Jute Points : 268,800 Yarn Denier : 3000 D Light Fastness : 4-5 Water Resistance: 4 Flammability: Low Effect Radius (BS 4790) Usage: Medium residential
Product Name : Carpet Tiles,Square Carpet Construction : Tufted, Textured Loop Pile Face Fiber : 100% universal certified nylon 6 yarn (Twisted and Heat Set for Maximum Performance ) Stain Repel/Stain Resist/Soil Release : in protection Antimicrobial : In Protection Dye Method : Solution dyed Finished Face Weight 23 oz./sq.yd.(780.g./sq.m.) more Gauge 1/10" (39.40/10 cm.) Rows 10.7/in. (31.50/10 cm.) Tufts 10.7/sq.in. (1,241.10/100 sq.cm.) Finished Pile Height 0.10-0.22 in. (3.5-8.5 mm.) avg. Standard Backing PVC-Free Comfort Nominal Total Thickness 0.24 in. (6.00 mm.) Nominal Total Weight 134.62oz./sq.yd. (4565.4 g./sq.m.) Specifications subject to normal manufacturing tolerances and may be changed without prior notice. Copies of actual test results available upon request.
Style : office floor tiles construction: Multi-leve lloop pile Yarn : 100% universal nylon 6 color system: 100% solution dyed Gauge: 1/10" Stitches: 10 per inch pile weight: 19 oz/sq.yd pile height :2.5-6.5mm (+/-0.5mm) Backing: PVC with fiberglass Tile size: 25 x 100cm Area of use: Heavy commercial Flammability: ASTM E648-10 Class I , GB8624-2012, B1 Smoke density: ASTM E662 Lessthan 450 Static propensity: AATCC-134 < 3.5kv Static control: life of the carpet static protection Formaldehyde purification:JC/T 1074-2008,class I
Name: floor velour carpets rug living room with modern design Manufacturing Process: Woven Incarporated Pile Construction: 100% PP Heat Set Pile Height : 8 mm Pile Weight : 1265 gms/m2( 37 Oz/ Sq. Yd.) Total Weight: 1982 gms/m2( 58 Oz/ Sq. Yd.) Construction : 320X420 Backing Finish : Incorporated Latexed Finish with High Quality Jute Points: 268,800 Yarn Denier : 2600 D Light Fastness : 4-5 Water Resistance: 4 Flammability: Low Effect Radius (BS 4790) Area of Usage : household size in stock : 80 x 120; 160 x230 ; 200 x280cm ,etc
Product Name: Machine tufted printed nylon Wall to Wall Carpet Material:100% nylon yarn Technics: Machine tufted Gauge: 1/10" Construction: cut pile ,loop pile ,cut & loop pile Color and pattern: Flexible Pile Height:4mm-10mm Pile Weight:400-1800 g/sqm Nominal width: 366 /400cm max. Backing : Action backing Packing : woven bag
Product Name:Carpet Tiles,Square Carpet Construction : Tufted, Textured Loop Pile Face Fiber : 100% plencolor Certified Nylon 6 yarn (Twisted and Heat Set for Maximum Performance ) Stain Repel/Stain Resist/Soil Release : in protection Antimicrobial : In Protection Dye Method : Solution dyed Finished Face Weight 20 oz./sq.yd. (678.1 g./sq.m.) more Gauge 1/12" (47.20/10 cm.) Rows 10.7/in. (42.1/10 cm.) Tufts 128.40/sq.in. (1,987.12/100 sq.cm.) Finished Pile Height 0.10-0.22 in. (2.5-5.5 mm.) avg. Standard Backing PVC-Free Comfort Nominal Total Thickness 0.28 in. (7.00 mm.) Tile Size 20 x 20 in. (500 x 500 mm.) Nominal Total Weight 114.0 oz./sq.yd. (3,865.4 g./sq.m.) Flammability (Radiant Panel ASTM-E-648) 0.45 (Class I) Smoke Density (NFPA-258-T or ASTM-E-662) 450 Methenamine Pill Test (CPSC FF-1-70 or ASTM D 2859) Self-Extinguishing Lightfastness (AATCC 16E) 4.0 at 80 hrs. Crocking (AATCC 165) 4.0 wet or dry Static Electricity (AATCC-134) 20% R.H.,70 F. 3.5 KV, Permanent Conductive Fiber Dimensional Stability - Aachener Test (DIN Standard 54318) 0.2% Appearance Retention Rating (CRI TM101) Severe Use Specifications subject to normal manufacturing tolerances and may be changed without prior notice. Copies of actual test results available upon request.