INTRODUCTION GF312V2 portable three phase multifunction energy meter calibrator is with comfort design, small size, and light weight. It is suit for electric power departments, measuring and quality examining departments and electric lab to field use. TECHNICAL SPECIFICATION Electrical parameters Accuracy class 0.05%, 0.1% Power Supply External power, 220V/110V, 50/60Hz Phase voltage supply 45-450V, 50/60Hz Li-Battery supply Voltage measurement Range 30-560V Error ±0.05% Harmonic 2nd-51st Current measurement Range (direct connection) 0.01-10A Range (clamp CT) 5A,100A,500A,1000A,2000A (option) Error (direct connection) ±0.05% Error (clamp CT) ±0.2% (5A, 100A ) ±0.5% (other) Harmonic 2nd-51st Power measure error Active power (direct connection) ±0.05% Active power (clamp CT) ±0.2% (5A, 100A) ±0.5% (other) Reactive power (direct connection) ±0.1% Reactive power (clamp CT) ±0.2% (5A, 100A) ±0.5% (other) Energy measure error Active energy (direct connection) ±0.05% Active energy (clamp CT) ±0.2% (5A, 100A) ±0.5% (other) Reactive energy (direct connection) ±0.1% Reactive energy (clamp CT) ±0.2% (5A, 100A) ±0.5% (other) Phase angle Range 0-360 Resolution 0.01 Error ±0.05 Frequency Range 45Hz-65Hz Resolution 0.001Hz Error 0.002Hz Pulse output Energy constant 25000 Pulse ratio 1:1 Output level 5V Pulse input Input channel 2 Input level 5-10V Input frequency Max. 100Hz Display Resolution 7 TFT color (480-234) Function Vector diagram Waveform Energy accumulation CT ratio test Local parameter input Wiring emulation Self-calibration Recorder check Data storage Data storage qty 5000 External extend memory Screen printing Communication port USB/RS232 Communication with PC Upload data External mini printer External keyboard Dimensions (WHD) (mm) 245-16870 Weight (kg) 1.8 Environmental conditions Ambient temperature -25C to +45C Relative humidity 30%-95%
INTRODUCTION The instrument is a precision AC energy meter testing instrument, mainly used to test three phase energy meter error on site and measure various of AC parameters. TECHNICAL SPECIFICATIONS Electrical parameters Accuracy class 0.05%, 0.1% Resolution 6 TFT (640-480) Power supply 220V±10%, 50/60Hz Li-polymer battery (size (mm): 110x51x16, nominal output voltage: 7.2V, capacity: 5000mAh) Power line supply (U1, UN), 85V-265V 50/60Hz Communication port RS232 Test voltage Range 5-480V Error ±0.05% (30V-480V) ±0.1% (5V-30V) Harmonic 2nd-63st Test current Range (direct connection) 5mA-20A Error (direct connection) ±0.05% (100mA-20A) ±0.1% (10mA-100mA) Range (clamp CT) 10mA-3000A Error (camp CT) ±0.2% (100mA-100A) ±0.5% (100A-3000A) Harmonic 2nd-63st Power measure error Active power (direct connection) ±0.05% (0.1A-20A) ±0.1% (0.01A-0.1A) Reactive power (direct connection) ±0.1% (0.1A-20A) Energy measure error Active energy (direct connection) ±0.05% (0.1A-20A) ±0.1% (0.01A-0.1A) Reactive energy (direct connection) ±0.1% (0.1A-20A) Phase angle Range 0-360 Resolution 0.01 Error ±0.05 Frequency Range 45-65Hz Resolution 0.001Hz Error 0.002Hz Pulse input Input channel 2 Input level 5-24V Input frequency Max. 2MHz Pulse output Energy constant 180000imp/kWh, 1800imp/kWh, 180imp/kWh Pulse ratio 1:1 Output level 5V Function Vector diagram Yes Waveform Yes Energy accumulation Yes Communication with PC Yes Mechanical parameters Instrument dimensions (WHD) (mm) 220-13861 Instrument Weight (kg) 1.7 Carry case dimensions (WHD) (mm) 450-320185 Carry case (kg) 8.5 Environmental conditions Ambient temperature -10C to 55C Relative humidity 15%-85%
HD2500 high pressure raymond grinding mill Specifications: Ring diameter: 2500mm Roller size: 600*300 mm Center speed: 70 r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300 mm Total weight: 75t Advantages: The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features : 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�?Patent product is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
Corn Flakes Processing Line produces cereal flakes, both plain or coated. The twin-screw extrusion technology is at the core of this very flexible and scalable process. Main Equipment: Corn Flakes Processing Line produces cereal flakes, both plain or coated. The twin-screw extrusion technology is at the core of this very flexible and scalable process. This technology is ideal to meet the market demands and breakfast cereal manufacturing: many raw materials are eligible with coating recipes such as sweet syrups, honey, chocolate and other compositions. Technical Features: We share our process knowledge to process healthy and balanced products made with wholegrain cereals or including a mix of multi-grains like corn, wheat, oats, rice, barley, rye, Buckwheat or barley... Corn Flakes Extruder is used to produce consistently high quality products while keeping the same organoleptic characteristics as traditional flakes. System Advantage: Advantages of Corn Flakes Processing Equipment:  1. Quicker process : 15 to 20 minutes against 8 to 10 hours with the traditional batch process 2. Variety of recipes: diversity of raw materials (cereals, tubers, various ingredients �?�) and particle size used (from flour to semolina), wide range of coatings 3. Possibility to add functional and tasty ingredients : natural color, salt, fiber, vitamins, minerals, emulsifiers, 4. Possibility to process multigrain flakes, for example by introducing other grains directly during extrusion. 5. Possibility to upgrade the production line to process expanded or coextruded breakfast cereals 6. Productive: continuous and automated process, quick start up and stop, fast and easy changeovers and with easy cleaning and maintenance procedures; 7. Cost effective : intensified transformation process generating savings in raw materials as well as energy and water, easy maintenance, hygienic design, compact design with less floor space Application Scope: Technical Parameters of Corn Flakes Equipment: Model Capacity Power Dimension QL-65 120-150kg/hr 180kw 40 x 5 x 3m QL-70 200-260kg/hr 260kw 45 x 5 x 3m
The species that we have are: Holothuria Tubulosa and Holothuria Polii. The differences, among these species are: Tubulosa have big spikes and Polii have smaller spikes or have no spikes at all. Holothuria Tubulosa collected from Mediterraneam Sea (Europe - Not Turkey) and is a sea cucumber of excellent quality, but it can be found in lower quantities than the other species and that is reflected on the pricing it gets. It barbs and hole body geometry put it on par with the species of Hokkaido (stichopus japonicus). All these species have calcium but we can remove it completely (totally black) according customer's requirements using different ways of processing. *Wild Sea Cucumber *Moisture
We are SS Pipe Fittings Trader in Mumbai, SS Pipe Fittings Supplier in Mumbai , SS Pipe Fittings Exporter from Mumbai , SS Pipe Fittings Dealer in Mumbai , SS Pipe Fittings Stockist in Mumbai , and SS Pipe Fittings Stockholder in Mumbai.With our state-of-art fabrication technology we are offer precision stainless steel fittings products manufactured using top grade of stainless steel. We have range of products available in different shapes and size to meet varying industrial needs. Our stainless steel products are capable and tested to protect against weathering effect, give long life, excellent tensile strength and high tolerance capability. Our huge warehouse is capable to facilitate any order deliver in time as well as at most competitive rates. Stainless Steel Fittings Stainless Steel Fittings Prashaant Steel Manufacturers are engaged in supplying and exporting of stainless steel 316 steel fittings. These stainless steel 316 stainless steel steel fittings ensure better strength and durability. Designed with high precision and engineered with hi-tech equipment these products have excellent mechanical properties. Along with this, the suitable material composition makes these stainless steel steel fittings highly resistive to corrosive environment. We are supplier and importer of Stainless Steel Fittings, which is cater to the demands of numerous application areas in engineering and construction industries. Made from qualitative grades of steel, these stainless steel 316L Steel Fittings are widely acclaimed for durability, corrosion resistance and high tolerance standards. We also offer customization of designs as per the requirements directed by the clients. . Standards : ASTM, ASME Designation : A 403, SA 403 Dimension Standard : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 Grade : Stainless steel Steel Pipe Fittings in all grades. Type : Seamless, Welded Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS Size : 1/2" to 24" Two Joint / Two Halve 316 Butt weld Fittings Size : 6" to 48" Types of Butt weld Fittings : Equal Tee, Nipple, Long Radius Elbow, Reducing Tee, Elbows, Swage Nipple, Short Radius Elbow, Reducer, Barrel Nipple, 90 Deg Elbow, Concentric Reducer, Reducing Nipple, 45 Deg Elbows, Eccentric Reducer, Bend, 180 Deg Elbow, End Cap, 1D Elbow, 3D Elbow, Stubend, 5D Elbow, Cap, Piggable Bend, Long Stubend, Tee, Short Stubend, Long Radius Bend. Also as per National & International Standard &Specification
Security camera installation accessories.1.Product Introduction of the security camera installation accessories.This security camera installation accessories was the latest production high quality with OEM ODM manufacture experience. It was die casting aluminum .We devoted ourselves to aluminum die casting part for many years, covering most of Europe and the Americas market. We are expecting become your long-term partner in China2.Product Parameter of the security camera installation accessories3.Product Feature And Application of the security camera installation accessoriessecurity cameras 4.Production Details of the security camera installation accessoriesPlace of Origin: Zhejiang, China (Mainland)Brand Name: FriendlyApplication: Security camerasMaterial: AluminumDimensions: OEM, Customized SizesCertification: ISO9001/ Utility model patent certificateSerivce: OEM/ODM/Customized/DesignSurface treatment: Powder Coated.Drawing formation:2D and 3D igs or stp formatDelivery: 3-4 weeks for mould and 3-5 days for samplesTolerance:+/-0.01mm 5.Product Qualification of the security camera installation accessories.6.Deliver,Shipping And Serving of the security camera installation accessories.Packaging Details: 1,With plastic bag,with pearl-cotton package. 2,To be packed in cartons. 3,Use glues tape to seal cartons. 4,Deliver out by DHL,FEDEX, UPS. Or according to customers' requirement.Port:ShanghaiLead Time :30-45DAYS 7.FAQQ: Are you trading company or manufacturer?A: We are factory.Q: How long is your delivery time?A: Mold leadtime:Within 30 days upon we receive the 50% of mold charges.Batch production leadtime: With 15 days upon we receive the 30% deposit.Q: Can you make the parts based on the samples?A: Yes, we could make measurement based on your samples and make the tooling die.Q: What is your terms of payment ?A: Mold :50% deposit +50% after the samples is approved.Batch production: 30% deposit +70% before shipment.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample for free charge but Pay first Return the sample fee after good shipping.Q: What do I need for offering a quote ?A: Please offer us 2D or 3D drawings (with material, dimension, tolerance, surface treatment and other technical requirement etc.) ,quantity, application or samples. Then we will quote the best price within 24h.Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 35-45 days if the goods are not in stock, it is according to quantity.Q: How to enjoy the OEM/ custom services ?A: Usually, base on your design drawings or original samples, we give some technical proposals and a quotation to you, after your agreement, we produce for you.8.Latest News 9.Recommendations
surveillance camera parts and accessories1.Product Introduction of the surveillance camera parts and accessories.This surveillance camera parts and accessories manufacturers was the latest production high quality with OEM ODM manufacture experience. It was die casting aluminum .We devoted ourselves to aluminum die casting part for many years, Covering most of Europe and the Americas market. We are expecting become your long-term partner in China2.Product Parameter of the surveillance camera parts and accessories.3.Product feature and applicationof the surveillance camera parts and accessories.security cameras 4.Production details of the surveillance camera parts and accessories.Place of Origin: Zhejiang, China (Mainland)Brand Name: FriendlyApplication: Security camerasMaterial: AluminumDimensions: OEM, Customized SizesCertification: ISO9001/ Utility model patent certificateSerivce: OEM/ODM/Customized/DesignSurface treatment:Powder Coated etc.Drawing formation:2D and 3D igs or stp formatDelivery: 3-4 weeks for mould and 3-5 days for samplesTolerance:+/-0.01mm 5.Product Qualification of the surveillance camera parts and accessories. 6.Deliver,Shipping And Serving of the surveillance camera parts and accessories.Packaging Details: 1,With plastic bag,with pearl-cotton package. 2,To be packed in cartons. 3,Use glues tape to seal cartons. 4,Deliver out by DHL,FEDEX, UPS. Or according to customers' requirement.Port: ShanghaiLead Time :30-45DAYS 7.FAQQ: Are you trading company or manufacturer?A: We are factory.Q: How long is your delivery time?A: Mold leadtime:Within 30 days upon we receive the 50% of mold charges.Batch production leadtime: With 15 days upon we receive the 30% deposit.Q: Can you make the parts based on the samples?A: Yes, we could make measurement based on your samples and make the tooling die.Q: What is your terms of payment ?A: Mold :50% deposit +50% after the samples is approved.Batch production: 30% deposit +70% before shipment.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample for free charge but Pay first Return the sample fee after good shipping.Q: What do I need for offering a quote ?A: Please offer us 2D or 3D drawings (with material, dimension, tolerance, surface treatment and other technical requirement etc.) ,quantity, application or samples. Then we will quote the best price within 24h.Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 35-45 days if the goods are not in stock, it is according to quantity.Q: How to enjoy the OEM/ custom services ?A: Usually, base on your design drawings or original samples, we give some technical proposals and a quotation to you, after your agreement, we produce for you.8.Latest News9.Recommendations
Home security camera parts1.Product Introduction of the home security camera parts.This home security camera parts was the latest production high quality with OEM ODM manufacture experience. It was die casting aluminum .We devoted ourselves to aluminum die casting part for many years, covering most of Europe and the Americas market. We are expecting become your long-term partner in China2.Product Parameter of the home security camera parts3.Product Feature And Application of the home security camera partsHome security cameras 4.Production Details of the home security camera partsPlace of Origin: Zhejiang, China (Mainland), Zhejiang, China (Mainland)Brand Name: FriendlyApplication: Home security camerasMaterial: AluminumDimensions: OEM, Customized SizesCertification: ISO9001/ Utility model patent certificateService: OEM/ODM/Customized/DesignSurface treatment: Powder coated.Drawing formation:2D and 3D igs or stp formatDelivery: 3-4 weeks for mould and 3-5 days for samplesTolerance:+/-0.01mm 5.Product Qualification of the home security camera parts.6.Deliver,Shipping And Serving of the home security camera parts.Packaging Details: 1,With plastic bag,with pearl-cotton package. 2,To be packed in cartons. 3,Use glues tape to seal cartons. 4,Deliver out by DHL,FEDEX, UPS. Or according to customers' requirement.Port:ShanghaiLead Time :30-45DAYS 7.FAQQ: Are you trading company or manufacturer?A: We are factory.Q: How long is your delivery time?A: Mold leadtime:Within 30 days upon we receive the 50% of mold charges.Batch production leadtime: With 15 days upon we receive the 30% deposit.Q: Can you make the parts based on the samples?A: Yes, we could make measurement based on your samples and make the tooling die.Q: What is your terms of payment ?A: Mold :50% deposit +50% after the samples is approved.Batch production: 30% deposit +70% before shipment.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample for free charge but Pay first Return the sample fee after good shipping.Q: What do I need for offering a quote ?A: Please offer us 2D or 3D drawings (with material, dimension, tolerance, surface treatment and other technical requirement etc.) ,quantity, application or samples. Then we will quote the best price within 24h.Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 35-45 days if the goods are not in stock, it is according to quantity.Q: How to enjoy the OEM/ custom services ?A: Usually, base on your design drawings or original samples, we give some technical proposals and a quotation to you, after your agreement, we produce for you.8.Latest News9.Recommendations
Security camera wiring accessories1.Product Introduction of the security camera wiring accessories.This security camera wiring accessories was the latest production high quality with OEM ODM manufacture experience. It was die casting aluminum .We devoted ourselves to aluminum die casting part for many years, covering most of Europe and the Americas market. We are expecting become your long-term partner in China2.Product Parameter of the security camera wiring accessories3.Product Feature And Application of the security camera wiring accessoriessecurity cameras4.Production Details of the security camera wiring accessoriesPlace of Origin: Zhejiang, China (Mainland)Brand Name:FriendlyApplication: Security camerasMaterial: AluminumDimensions: OEM, Customized SizesCertification: ISO9001/Utility model patent certificateSerivce: OEM/ODM/Customized/DesignSurface treatment: Powder coated.Drawing formation:2D and 3D igs or stp formatDelivery: 3-4 weeks for mould and 3-5 days for samples Tolerance:+/-0.01mm 5.Product Qualification of the security camera wiring accessories.6.Deliver,Shipping And Serving of the security camera wiring accessories.Packaging Details: 1,With plastic bag,with pearl-cotton package. 2,To be packed in cartons. 3,Use glues tape to seal cartons. 4,Deliver out by DHL,FEDEX, UPS. Or according to customers' requirement.Port:ShanghaiLead Time :30-45DAYS7.FAQQ: Are you trading company or manufacturer?A: We are factory.Q: How long is your delivery time?A: Mold leadtime: Within 30 days upon we receive the 50% of mold charges.Batch production leadtime: With 15 days upon we receive the 30% deposit.Q: Can you make the parts based on the samples?A: Yes, we could make measurement based on your samples and make the tooling die.Q: What is your terms of payment ?A: Mold :50% deposit +50% after the samples is approved.Batch production: 30% deposit +70% before shipment.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample for free charge but Pay first Return the sample fee after good shipping.Q: What do I need for offering a quote ?A: Please offer us 2D or 3D drawings (with material, dimension, tolerance, surface treatment and other technical requirement etc.) ,quantity, application or samples. Then we will quote the best price within 24h.Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 35-45 days if the goods are not in stock, it is according to quantity.Q: How to enjoy the OEM/ custom services ?A: Usually, base on your design drawings or original samples, we give some technical proposals and a quotation to you, after your agreement, we produce for you.8.Latest News 9.Recommendations
Polyurethane Screen Details: Fine polyurethane shale shaker screen Fine polyurethane shale shaker screen has a extremely fine openings, which is trapezoidal. It can prevent plugging and blocking during separating the materials. Additional, the fine opening can supply more accurate screening in the applications. Specifications Material: urethane. Mesh opening: sh Dry panel: 0.25" 140 mesh. Open area: 35% ? 45%. Lifespan: 6?12 months. Features Large open area. Superior capacity and performance. Low operating and maintenance cost. Easy to install and uninstall. Durable and long service life. Practically non-blinding. Can be repaired or patched in place. Modular screening Polyurethane Modular screening is an extremely adaptable system. This system can be a permanent flat deck, which is fixed on the frame or removable modular solution using modular tension mats. The fastening accessory provides substantial locking area. Specifications Panel size: 12" x 24" or 12" x 12". Mesh type: slot opening and square opening. Mesh opening: 1/64" ? 3/1/2". Sheet thickness: 30 mm ? 70 mm. Features Longer life. It has 15 to 20 times life of wire cloth. lower plugging and blinding and better production performance. Various materials available: Etchers, esters at 60A ? 90A hydrometer. Easy installation. Flexible installation options. Installation tips The first method: Install the frame onto the machine in advance. Place the modular screening into the frame along one edge. Strike the opposite edge with a mallet, which will be delivered along with the screening. Strike the modules continuously until all the modules are in position. The second method: Install the modules onto the frame according to the first method. Then install the frame with modules onto the machine until all are installed. Tension Mats Compared with modular screening, tension mats is easier to install and replace. Just fix the tension mats through hooks on the two side. The hook can be metal or polyurethane for different machine and applications. You can replace a tension mats in seconds and the whole system in minutes. And it need no special tools. Specifications Material: polyurethane or rubber. Reinforcement: cable or steel tube. Size: Maximum Over-hooks Dimension: 3.5 m. Maximum Width Dimension: 1.525 m. Mesh opening: max. 2.5". Color: yellow, blue, red and other colors can be customized.
single lever chrome plated brassfaucet for bathroom Product Description Material:A degree Brass Body, Zinc Alloy Handle Quality guarantee:5 years Certificates:ACS, CE, ISO9000, cUPC, WaterMark, SASO, NSF,Low-Lead ;EN1111 ; EN817 LOGO:Customized Logo OEM & ODM:Accepted and Provided Packaging & Shipping: Inner packing: cloth bag or pearl wool, Outer packing: kraft carton The package can be done as customers' requirements Company information: Freebay International Limited is one of the outstanding manufacturers of faucets, ceramics, toilet seat cover, Shower and accessory in Xiamen, China. As a professional manufacturer, we always place great emphasis on quality control, Relying on strict procedures, all products are supervised and tested at each stage. With reasonable prices and reliable quality, we export to Europe, the Middle East, South America, and Southeast Asia. Furthermore, we have obtained a good reputation for over ten years especially in markets of Russia, Poland, Ukraine, Romania, the UK, France, Saudi Arabia, Kuwait and other countries and regions. the subsidiary of SongFeng ceramic company Limited, come from former factory is Taifeng which was founded in 1990, specialized in ceramic and sanitary products. Designed with the requirements of international market in mind, our faucets are available in different styles and specifications. Moreover, we can also design products according to customers' samples. Superior quality and reasonable prices are our main advantages. In addition, excellent services and on-time delivery also have helped us win a large number of customers and great markets. If you are interested in any of our products, please contact us freely for more details. We are looking forward to building business relationships with companies from all over the world in the near future. FAQ 1.Where is your factory? Our factory is located in Xiamen, Fujian province, China. 2.Can your factory print our logo on the product? Our factory can laser print customer's logo on the product with the permission from customers. 3.Can I have some samples? Of course you can, samples are always available for you. 4.What method of payment do you support? L/C, T/T 5.Is the faucet has manual paper? Yes, we can provide manual for you. 6.How long is the production lead time? It takes 30-45 days. We have large production capacity which can ensure fast delivery time even for large quantity. If you have any other questions, please do not hesitate to contact us.
Chrome plated brass kitchen faucet Product Description Material: A degree Brass Body, Zinc Alloy Handle Quality guarantee: 5 years Certificates: ACS, CE, ISO9000, cUPC, WaterMark, SASO, NSF,Low-Lead ;EN1111 ; EN817 LOGO: Customized Logo OEM & ODM: Accepted and Provided Packaging & Shipping Inner packing: cloth bag or pearl wool, Outer packing: kraft carton The package can be done as customers' requirements Company information: Freebay International Limited is one of the outstanding manufacturers of faucets, ceramics, toilet seat cover, Shower and accessory in Xiamen, China. As a professional manufacturer, we always place great emphasis on quality control, Relying on strict procedures, all products are supervised and tested at each stage. With reasonable prices and reliable quality, we export to Europe, the Middle East, South America, and Southeast Asia. Furthermore, we have obtained a good reputation for over ten years especially in markets of Russia, Poland, Ukraine, Romania, the UK, France, Saudi Arabia, Kuwait and other countries and regions. The subsidiary of SongFeng ceramic company Limited, come from former factory is Taifeng which was founded in 1990. Designed with the requirements of international market in mind, our faucets are available in different styles and specifications. Moreover, we can also design products according to customers' samples. Superior quality and reasonable prices are our main advantages. In addition, excellent services and on-time delivery also have helped us win a large number of customers and great markets. If you are interested in any of our products, please contact us freely for more details. We are looking forward to building business relationships with companies from all over the world in the near future. FAQ 1.Where is your factory? Our factory is located in Xiamen, Fujian province, China. 2.Can your factory print our logo on the product? Our factory can laser print customer's logo on the product with the permission from customers. 3.Can I have some samples? Of course you can, samples are always available for you. 4.What method of payment do you support? L/C, T/T 5.Is the faucet has manual paper? Yes, we can provide manual for you. 6.How long is the production lead time? It takes 30-45 days. We have large production capacity which can ensure fast delivery time even for large quantity. If you have any other questions, please do not hesitate to contact us by mail to: freebaysales (at) 163 (dot) com We will send you our catalog for your reference once receive your mails.
HD 2500 specifications: Ring diameter: 2500 mm Roller size: 600*300mm Center speed: 70r/min Max feeding size: 35mm Final product size: 80-400mesh Capacity: 15-60t/h Dimension: 12500*12250*12300mm Total weight: 75ton Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HD 1720 specifications: Ring diameter: 1720 mm Roller size: 510*300mm Center speed: 92.5r/min Max feeding size: 30mm Final product size: 80-400mesh Capacity: 5-32t/h Dimension: 12500*12250*10400mm Total weight: 48ton The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
HD1280 specifications: Ring diameter: 1280 mm Roller size: 370*240mm Center speed: 125-150r/min Max feeding size: 20mm Final product size: 80-500mesh Capacity: 1.5-10t/h Dimension: 8500*7500*8200mm Total weight: 19t The biggest Grinding machine in the Asia HD2500 Raymond grinding mill grand launched Breakthrough the bottleneck of the grinding mill The greatest capacity grinder of Asia alone The processing capacity of each machine is 60t/h The processing capacity is 30% high than the capacity of the R type Raymond mill. The first choice for large scale ore non-metal powder processing The production fineness is 80-400 meshes Features 1.Reduce the roller and vibrate and improve the production volume according to the calculation, Regarding to the HD series grinding mill, under the sufficient grind force, the rollers is reduced and the grind space can be increased, The material layer filled better between the roller and ring, the attrition between rollers and rings is low, and the  vibration and noise are also reduced, at the same time, the  resistance of airflow of the fan becomes less. Winds can flow freely, thus the winds increase greatly, which determines the increase in the production volume. The production volume is 20% to 30% higher than R Raymond mill. 2.The increase mechanism of linkage pressure of the rollers, which greatly prolongs the useful life of the equipment and increases the capacity by 20% under the same power. 3.With the original roller assembly, the oiling time increased 6 - 15 times, archive the application of oil once, use for 30-45 days 4.High efficiency and stability, the ring and roller always contact during processing, the efficiency and stability of the grind are improved 5.Higher Accuracy powder Classify, without coarseness missing, Variable frequency Squirrel cage classifier�Patent product� is adopted, the accuracy is 80-600 meshes. The classify efficiency reached 99%. The powder selection is stable and adjustable, compare with the blade type, it can greatly improve the powder selection efficiency and qualification rate of the Final product. 6.High efficiency and energy-saving centrifugal blower, the blower is crucial in the operation of Grinding mill, the HD series grinding mill adopts the high efficiency Impeller type energy-saving blower which efficiency is highly improved than straight blade fan. 7.Low noise and vibration: with the reasonable set of Collocation of above, the HD series has the advantages of high production, high qualification rate Low noise and vibration in grinding of the 325-400 meshes. 8.It's applied to the non-metallic non-flammable non-explosive minerals with water content less than 6% and the Moh's hardness under 6.
From the heart of the beautiful NATURE! A precious, unique, smart and healthy gift. Free of preservatives & gelatin. Packaged in a suitable & beautiful luxury carton bag contains 25 pieces of fruit cubes to serve you as a handy snack in all occasions. This product is a Mix of 15 fruits (Peach, Cherry, Lemon, Guava, Apricot, Strawberry, Orange, Mango, Pineapple, Date, Raspberry, Apple, Plum, pomegranate, Fig, Grape) - Natural Fruits (Apple, Lemon) . INGREDIENTS: According to type: (Peach, Cherry, Lemon, Guava, Apricot, Strawberry, Orange, Mango, Pineapple, Date, Raspberry, Apple, Plum, pomegranate, Fig, Grape) - Natural Fruits (Apple, Lemon) - Sugar - Olive Oil . Nutritional Facts: Calories (per 100 g): 340 calories. Nutritional value (per 100 g): Carbohydrates 86 g, Fats 178 mg, Total Sugars 50 g, Calcium 21 mg, Sodium 93 mg. Shelf life: 2 year. . THE FRUIT ORIGINAL TASTE! We make our bars from simple, natural ingredients, but sourcing ingredients that meet our standards is far from simple. We insist on working only with farmers who share our commitment to quality, taste and the health of our planet. . Itâ??s All natural! Non-GMO, No preservatives, Gluten free, Without dyes, Without flavoring, . Buying Options: We are selling this product by Pallets. Each 1 pallet contain 70 box (each box contain: 18 Cardboard Bag * 25 pieces) 20 ft. container contain 10 pallet 40 ft. container contain 20 pallet Packaging & Delivery Packaging Details: Each Pallet contain 70 Packaging boxes Each Packaging box contain 18 cardboard bag Each bag contain (25 pieces * 250g) 20 ft Container is 9-10 Pallet 40 ft Container is 11-20 Pallet Dimensions: Packaging box (cm): 21*32*48 Delivery Time: 15 to 45 days depend on the destination * Our Services Wholesalers Discounts: All the orders are benefiting of 12% discount from 1/10/2017 â?? 29/09/2018 as a promotion for the new agents. While you still could reach up to 27% discount depends on the amount! * Free Samples: We are offering free samples service, while the shipping cost still on the buyer. * Shipping Services: We are offering shipping services with the best prices available on the market, but it's still an optional decision depends on buyer willingness.
FIT SNACK (FRUIT BARS) Natural 100%! With your favorite SPORT! Great source of Vitamin C, rich in antioxidants and dietary fibers with a special touch from nature bu adding the apple, simply a health meal you must try. Benefits of Lemon: Rich in vitamin C Promotes hydration. Improves the skin quality. Aids in digestion. Helps prevent kidney stones. INGREDIENTS: According to type: (Peach, Cherry, Lemon, Guava, Apricot, Strawberry, Orange, Mango, Pineapple, Date, Raspberry, Apple, Plum, pomegranate, Fig, Grape) - Natural Fruits (Apple, Lemon) - Sugar - Olive Oil Nutritional Facts: Calories (per 100 g): 340 calories Nutritional value (per 100 g): Carbohydrates 86 g, Fats 178 mg, Total Sugars 50 g, Calcium 21 mg, Sodium 93 mg Shelf life: 2 year Storage conditions: not more than 25 ° C. THE FRUIT ORIGINAL TASTE! We make our bars from simple, natural ingredients, but sourcing ingredients that meet our standards is far from simple. We insist on working only with farmers who share our commitment to quality, taste and the health of our planet. Itâ??s All natural! Non-GMO No preservatives Gluten free, all natural Without dyes Without flavoring FULL OF NATURAL FOOD FIBERS To receive the greatest health benefit, eat a wide variety of high-fiber foods. Our GIDA FIT SNACK bars are rich of fruit fibers. A high-fiber diet has many benefits, which: Helps maintain bowel health Lowers cholesterol levels Helps control blood sugar levels Aids in achieving healthy weight Packaging & Shipping Buying Options: We are selling this product by Pallets. Each 1 pallet contain 90 box (each box contain: 12 show boxes * 24 fruit bar/box * 0.14g/bar) 20 ft. container contain 10 pallet 40 ft. container contain 20 pallet Packaging & Delivery Packaging Details: Each Pallet contain 90 Packaging boxes Each Packaging box contain 12 show boxes Each Show box contain (24 bar * 0.14g) Delivery Time: 15 to 45 days depend on the destination Our Services Wholesalers Discounts: All the orders are benefiting of 12% discount from 1/10/2017 â?? 29/09/2018 as a promotion for the new agents. While you still could reach up to 27% discount depends on the amount! Free Samples: We are offering free samples service, while the shipping cost still on the buyer. Shipping Services: We are offering shipping services with the best prices available on the market, but it's still an optional decision depends on buyer willingness.
DM542 drive, and 57BYGH stepper motor with the use of Brand: ACT aincot Product type: DM542 type DM542 type subdivision driver of two phase hybrid stepping motor drive, with 18 ~ 50V DC power supply, suitable for driving voltage of 18V ~ 50V, a two-phase hybrid step current is less than 42~86 mm diameter 4.0A stepper motor. The current loop driver adopts AC servo drive subdivision control, torque ripple of motor is small, low speed operation is very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices. I. overview DM542 type subdivision two-phase hybrid stepper motor drive, with 18 ~ 50V DC power supply, suitable for driving voltage of 18V ~ 50V, a two-phase hybrid step current is less than 42~86 mm diameter 4.0A stepper motor. The current loop driver adopts AC servo drive subdivision control, motor torque fluctuation is small, low speed running smoothly and almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery demand higher resolution devices. 1 average current control, two phase sinusoidal current drive output 2 DC 24 ~ 50V power supply 3 opto isolated signal input / output 4, overvoltage, undervoltage, overcurrent, interphase short-circuit protection function 5, fifteen files subdivision and automatic half flow function 6, eight files output phase current setting 7 has the offline command input terminal 8 the torque of the motor is related to its speed, irrespective of the number of steps the motor has to rotate 9 high starting speed 10. high speed torque Input voltage DC 18 to 50V input The input current is less than 4 Amperes The output current is 1.0A to 4.2 Power dissipation: 80W; internal insurance: 6 The working temperature is -10 to 45 degrees; the storage temperature is between -40 and 70 centigrade Moisture can not dew or water Gases are prohibited from flammable gases and conductive dust Weight 200 grams
