Water Based Anti Corrosive Metal Primer Suppliers and Manufacturers

1,Name: Sodium nitrite Molecular formula: NaNO2 Formula weght:69.00 2Property: (1) ordinary sodium nitrite: white little crystals or light yellow  (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status. Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures. 3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc. Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten. 4 Specification: (Technical Standards:GB2367-2006) Item Unit Molten salt G High G First G Qualified G Dry powder G Assay % 99.3 99.0 98.5 98.0 98.5 Sodium nitrate % 0.6 0.80 1.00 1.90 0.80 Chlorides % 0.03 0.10 0.17 -- 0.1 Water insolubles % 0.02 0.05 0.06 0.10 0.06 Moisture % 1.0 1.4 2.0 2.5 0.2 Loose degree -- -- -- -- 95 5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.

Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12

[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate [English name] Sodium dodecyl sulfate. [Abbreviation] SDS [CAS No.] 151-21-3 [Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl [Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl) [Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards. [Technical Indicators] [Performance and Applications] This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries. (1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc. (2) Used as anionic surfactant, emulsifier and foaming agent (Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc. (4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation. (5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent. (Use 6) Biochemical analysis, electrophoresis, ion pair reagent

[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected   3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15   - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01

We Can Supply Simple Moisturizing Cream Water Based 125 Ml Please Don't Hesitate to Contact Us in Case of Any Interested

Tufkote W8759 Metal Primer

Specifications - A cappuccino is an espresso-based coffee. A drink that has been originated in Italy and is traditionally prepared with creamer. Flavour : Creamy Ingredients : Instant Coffee Powder + Milk + Sugar Variants : Regular Coffee, French Coffee, Mocha. Pack Size : i> 14gm, 18gm, 25gm, 500gm, 1Kg and it can also get customised. ii> In Bulk 25kgs / Carton Pack Type : Pouches, Sachets. Recipe - Just mix it up with hot water to get a refreshing and delicious cup of coffee. Shelf Life : 6 - 9 months. Price - $3 / Kg FOB

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Fast-drying primer for heavily used iron structures. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere. Size 1 kg 5kg 20kg The zinc dust primer contains micronized zinc dust and an epoxy ester resin as a binder base. The product has cathodic rust protection properties and also has a sealing effect. The zinc dust primer is suitable for the long-term passivation of iron and steel, even when they are in an aggressive atmosphere. The product can be used on sandblasted steel components and structures as corrosion protection, as well as for steel equipment, pipes and body parts Weight 0.3kg Size 1kg, 5kg, 20kg

Natural Red Iron Oxide: Natural Red Iron Oxide is the most widely occurring Minerals in Earth. It is widely used in many applications due as it is economical as compared to Synthetic Oxides. Applications : Red Oxide is anti-corrosive and has inertness to alkali and chemicals which makes its very viable for making of paint, protective coating for steels, cement coloring, NPK Fertilizers, paving tiles. Packing : 25Kgs Bags.

Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.

Tufkote W8568SLM Primer

Roasted Guar Korma has been developed as a product free of antinutritive factors with balanced Amino Acid Profile. Suitable for Poultry, Swine, Ruminant and Aquaculture. Processed with heat and steam, inactivates harmful trypsin inhibitor which indirectly enhances protein and Amino acids digestibility in the product resulting in increased productivity of livestock and poultry. This process also reduces gummy substance by hydrolysing glactomannan and heat breaks cell walls resulting in higher digestibility of Guar Korma. The anti-nutritive trypsin inhibitor is present in both Soybean and Guar seed, but gets inactive when processed into Soybean meal and Guar meal respectively. We have two qualities of Roasted Guar Korma namely ULTRA and PREMIUM In Roasted Guar Korma ULTRA, the minimum protein content is 48 % and in Roasted Guar Korma PREMIUM, the minimum protein content is 55 %. The other nutritional and Amino Acid values of ULTRA and PREMIUM Roasted Guar Korma are listed below:- • Higher percentage of Crude Protein (CP) • Free From Aflatoxins • Higher Digestibility Index, due to the removal of anti-nutritive factors • More desirable and balanced Amino acid Profile • Higher Energy content and fat percentage • Lower percentage of less digestible Fibre • Higher Palatability, complete elimination of characteristic bean odour and taste. • Low content of Total Volatile Nitrogen (TVN) • Free flowing, uniform fine particle size with good fat and water binding ability NUTRITIONAL VALUES ULTRA PREMIUM Protein 48% – 50% 55% – 60% Metabolize Energy 2550 KCal/Kg 2700 KCal/Kg Moisture Less Than 8% Less Than 6% Fiber 6% – 8% 4% – 5% Fat 5.00% 5.00% Ash/ Sand Silica Less Than 2% Less Than 1% Calcium 0.55% 0.55% Phosphorus 0.68% 0.68% Available Phosphorus 0.19% 0.19% Urease Activity Less Than 1% Less Than 1% Pepsin Digestibility 85.00% 85.00% Trypsin Inhibitor Less Than 1 Less Than 1 Aflatoxins NIL NIL Salmonella NIL NIL E.Coli NIL NIL

During last decade Guar has immerged as an important industrial raw material and Produced by man for thousands of years. India has been the single largest producer and exporter of Guar gum accounting for more than 80 percent of the global output and trade. Guar has now assumed a larger role among the domesticated plants due to its unique functional properties. India Ranks First in the production of guar which is grown in the North Western part of the Country which mainly includes the states of Rajasthan, Gujarat, Haryana and Punjab. Other main countries are Pakistan, U.S.A and Brazil The by-product of Guar Gum industry consisting of the outer seed coat and germ material is called guar meal. The Guar meal after gum Extraction is a potential source of protein and contains about 42% crude protein which is one and a half times more than the level of protein in guar seed. The protein content in guar meal is well comparable with that of oil cakes. It is used as a feed for livestock including poultry. Guar meal contains two deleterious factors i.e. residual guar gum and trypsin inhibitor, Toasting of Guar Gum improves its nutritive value in chicks. Toasted guar Meal can be used in limited quantity i.e. Up to 10% in Poultry diet. However it can replace groundnut cake by almost 100% in animal feeds. Guar Gum (Galactomanan) is a high molecular weight carbohydrate polymer made up of a large number of mannose and galactose unit linked together. The crude Guar Gum is a greyish white powder 90% of which dissolves in water. It is non ionic polysaccharide based on the milled endosperm of the guar bean whose average. Composition is: Hydrocolloid: 23% Fats: 40% Proteins: 34% The most important property of the Guar is its ability to hydrate rapidly in cold water to attain a very high viscosity at relatively low concentrations. Its specific colloidal nature gives the solution an excellent thickening power which is 6 to10 times thicker than that obtained from starch. It is stable over a wide range of PH and it also improves the flow ability and pump ability of the fluid. It is a superior friction loss reducing agent.

Shubhlaxmi Industries is a pioneer manufacturer/processor and exporter of Psyllum Husk. We provide husk fiber globally keeping its freshness and goodness intact. The botanical name of Psyllum husk is Plantago Scraba. It is a member of a plant name Plantago. It is commonly known as isabgol. Psyllum Husk is the outer portion of the seed of the plant. It is extremely hygroscopic hence it can absorb water much more than its weight. It has been originated from Mediterranean region but nowadays it is cultivated in North Gujarat, West Rajasthan and some states of North India. Basically, Psyllum husk is very old herb that is used since ancient time as laxative. It is completely natural anti diarrheic. It is very fibrous; it throws toxins out of the intestine and stomach. It is top herb that is used in weight control. It is used for thickening ice cream. It is generally consumed after soaking it in the water. Specification HS Code : 012119032 Grade : 99% 98% 95% 85% powder 99% Moisture 12% Max 12% Max 12% Max 12% Max 12% Max Total Ash 4% Max 4% Max 4% Max 4% Max 4% Max Acid Insoluable Ash 1% Max 1% Max 1% Max 1% Max 1% Max Light Extraneous Matter 1% Max 2% Max 5% Max 15% Max 1% Max Swell Volume 40 Ml/gram Max 40 Ml/gram Max 40 Ml/gram Max 35 Ml/gram Max 40 Ml/gram Max Insect Fragments Per 25 Gram 100 Parts Max 100 Parts Max 100 Parts Max 100 Parts Max na Salmonella Per 10 Gram absent absent absent absent absent E.coli Per Gram absent absent absent absent absent Yeast And Mould Per Gram 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max 1000 Cfu/gram Max Packing : 25 Kg Netpaper Bags With Inner Food-grade Poly-liner Quality Assurance : Sgs, Geo Chem,eu Standards,usfda Origin : Gujarat, Rajasthan, Madhyapradesh Loading Capacity : 11mt In 20'fcl & 26mt In 40'fcl