Stepper Motor Drive Suppliers and Manufacturers

Specifications 1)ce and rohs approved 2)quality system: ts16949.

Model:42hs¨º¡ì110bygh 1.8㨺© Price:0 Step accuracy--------- 5% Temperature rise--------80æ max Ambient temperature range-----20æ~+50æ Insulation resistance-----100m|¸min.500vc dc Dielectric strength-----1800v ac 1s 5ma

Vid23 is a precise stepping motor of patent design. It is specially designed with transparent pointer shaft, pointer lumination intensity is superior to tranditional way. It also bring cost reduction in saving number of leds. Vid23 with a gear reduction ratio of 1/180. Its mainly used in dashboard instrumentation or other digital indicator equipments, to transfer digital signals directly and accurately to analog display output. Vid23 is driven by 2 sequent logic pulse signals. It can be driven in 5v ~ 10v providing shaft stepping angle resolution 1/12. The pointer can move with a speed more than 400hz. 1000pcs/ctn, gross weight 10.5kg, 430*314*478mm

Introduction The d2hb882mb is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved. Features Low cost and good high-speed torque 14 selectable resolutions Supply voltage up to +80vdc Suitable for-2-phase and 4-phase motors Output current up to 5.86a Dip switch current setting 8different values Optically isolated input signals Pulse frequency up to 200khz Automatic idle-current reduction Small size (107*97*48), weight:1kg

Introduction The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved. Features Low cost and good high-speed torque Supply voltage up to +45vdc Output current up to 5.86a Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200khz Dip switch current setting 8 different values Small size (122.2*90*33), weight:0.3kg

Hybrid Stepping Motor(110BYGH) Features: Model: 110BYGH99-001; 110BYGH150-001; 110BYGH202-001 Step angel ( íp) : 1.8 Motor Length L(mm): 99/150/201 Rate Voltage (V): 4.95~5.44 Rate Current (A): 5.5~8 Phase Resistance ( ª+ ): 0.67~0.9 Phase Inductance (mH): 12~15 Holding Torque (N.m): 11.2~28 Lead Wire (NO.): 4 Rotor Inertia (g. c¬O): 5.5~16.2 Detent Torque (kg.cm) 5~11.7 Motor Weight (kg): 5~11.7. 110mm,5-11.7kg,28n-m.

Modelú¦85BYGH450A-001ú+85BYGH450A-002 ú+85BYGH450B-002ú+85BYGH450B-004ú+85BYGH450B-00885BYGH450C-001ú+85BYGH450C-012ú+85BYGH450D-002ú+85BYGH450D-007 Step angel ( íp ): 1.8 Motor Length L(mm): 75~151 Rate Voltage(V): 1.9~7.8 Rate Current (A): 2~6 Phase Resistance ( ª+ ): 0.43~3.9 Phase Inductance (mH): 2.5~22 Holding Torque (N.m): 2.1~9.3 Lead Wire (NO.): 4/8 Rotor Inertia (kg. c¬O): 1.4~3.6 Motor Weight (kg): 2.3~5. 85mm,9.3n-m.

SD-2H086MB Features Low cost and good high-speed torque 14 selectable resolutions Supply voltage up to +80VDC Suitable for-2-phase and 4-phase motors Output current up to 5.86A Dip switch current setting 8different values Optically isolated input signals Pulse frequency up to 200KHz Automatic idle-current reduction Small size (107*97*48),Weight:1KG

SD-2H044MA Features Low cost and good high-speed torque Supply voltage up to +45VDC Output current up to 5.86A Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200KHz Dip switch current setting 8 different values Small size (122.2*90*33),Weight:0.3KG

Q2HB88M Features (1) High performance, low price (2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480 (3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge (4) Bipolar constant current chopping circuit (5) Opto-isolated input/output (6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase) (7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V) (8) Highest response frequency: 200Kpps (9) Over voltage protection, overheat protection, over current protection

Byj series stepper motor Model 35BYJ46 Rated voltage 12VDC Number of Pole 4 Speed Variation Ratio 1/85.25 Stride Angle 7.5fp /85.25 DC resistance 130ohmf+7%(25k) Idle In-traction Frequency >500Hz Idle Out-traction Frequency >800Hz In-traction Torque >78.4mN.m(120Hz) Self-positioning Tor >39.2mN.m insulated resistance >10ohm(500V) insulated electricity power 600VAC/1mA/1s Insulation grade A Rise in Temperature

Fmcg, industrial supplies, equipment, raw materials, minerals, lubricants, cements, barite , building and construction, fresh vegetables & fruits, lubricants & oils,quartz, dry fly ash, fly ash bricks,quartz stone, all kinds of quartzs, automobile spare parts and all kinds of engineering motors, Automobile spare, Parts And Accessories Of The Motor Vehicles.Fast growing logistics service provider caters to our customers requirements in terms of international freight forwarding. being at the forefront has enabled us to offer a great deal of expertise in the custom clearing and forwarding industry.

Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations

Ferrous & non ferrous metals scrap such as aluminium ingot a7/a8, copper cathode, copper wire mill berry, aluminium 6063 extrusions & hms 1/2 80/20 isri 200 206.International trade & export

Brand: longsmotor Model: 17hs3404n Step angle: 1.8 degrees motor length: 34mm Current: 0.4A Static distance: 0.32n.m Number of leads: 4 Weight: 0.22kg

PMD006P3E is a kind of micro integrated stepper motor microstepping driver, which can be directly installed in the rear 42/57/86 etc series stepper motor, and which has the advantages of small size, strong driving force, and low heat and so on. PMD006P3E stepping motor driver can provide 0~6 continuous adjustable peak current, maximum 128 microstepping, free current which can be adjusted continuously.

Chemicals, fertilizers , goats, sheep, cows, wood pellets, euro1 pallets, sugar, feed soybean meal, alfalfa hay, dolce gusto machine, pine wood pellets, sunflower oil, scrap copper, electric motor scraps, fridge compressor, milk, eggs, a4 papers, pet flakes, confectionaries, chocolate, pentium pro cpu ceramic pu foam, fairly used cloths, aluminum scrap, aluminum foil paper, 6063 ubc cans, , motherboards, frozen pork, frozen chicken,frozen beef, fairly used cars, trucks, caterpillars, farm trucks, energy drinks , chilli.

Part No. 20BYGH408Single Shaft Frame Size:  NEMA8 Step Angle:  1.8 degree Voltage:  4.32VDC Current: 0.8A/phase Resistance: 5.4Ohm/phase Inductance:  1.5mH/phase Holding torque:  30Kg-cm Rotor inertia: 3.6  g-cm2 Detent torque: 5� kg-cm Number of wire leads:   4 Weight:  0.2KG Length:40mm Front  shaft diameter: 4mm Front shaft length: 20mm round shaft This model is for Single shaft, with 4mm motor shaft, 20mm front shaft length, round shaft! More Order Quantites, more  discount!