Rubber molding press
Rubber kneader rubber mixer rubber mixing mill .Rubber Kneader with complete sealed condition; .National Patent for the dust-proof seal; . ISO 9001-2000 Certification; 1.Rubber kneader with completely sealed condition,materials are mixed or plasticated under certain pressure,controllable temperature ,which makes high production effciency and obtains excellent quality. 2.Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to bedispersed uniformly. 3.Surface where is contacted with the materials are all platedwith hard chromium and polished,which is corrosion-resistantand wear-resistant. 4.Jacket construction is adopted in parts that surfaces contactwith materials to achieve excellent water-cooling or steamheating effect and fit in with the needs of plastics and rubberprocessing technology. 5.Feeding from back door on the frame (or a separate top door)is convenient for continuous process operation in aproduction line. The mixing chamber is able to turn forward by 140 aroud the frond rotors to discharge and is easy for changingpigments and cleaning the chamer.
1. Rubber tensile testing machine The tensile, tear, peel, compression, bending and shear tests of rubber products were carried out, measure the performance parameters of the product, such as tensile strength, elongation, elastic modulus and yield strength and son on. 1.1 The testing machine has overload protection device. When the applied force exceeds 2%-10% of the maximum capacity of the testing machine, the overload protection device ensures the automatic shutdown of the testing machine. 1.2 The test machine has limit position protection device. When the beam moves to the upper and lower limit positions, the limit device should act immediately to stop the movement automatically. 1.3 During the test, when the sample breaks, the test function automatically stops, the device automatically stops or according to set mode to returns, then stop.
2. Rubber abrasion tester Rubber abrasion tester is widely used in rubber industry. It is mainly used to test the wear resistance of rubber. 2.1 DIN Abrasion Testing Machine, it is used to determine the wearability of rubber to identify the quality of rubber products. During the test, the rubber rubbed against the gauze on the roller under a certain load, and measure the wear loss. The equipment consists of machine base, roller, weight, reducer, motor, transverse block, cantilever, screw rod, etc. Rubber sample is clamped on the cantilever rotary spring, and the speed reducer drives the roller to rotate. Under the prescribed pressure, the gauze of the roller rubs against the sample to achieve the purpose of wear. The equipment has the advantages of small sample, time saving and no repeated friction.
FUNCTION: The machine press, dewater, flat and cut natural latex coagulum through five rollers, which is a equipment for making smoke rubber. Component: 1. motor belt drive unit 2. Machine frame 3.rolling device 4. spray system 5. wheel device Working Principle: motor reduce a pair of gear (20:52) through one grade V-belt drive, drive-gear transfers drive to forth pair of lower roller, each roller work together after through gear drive.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing. Banbury Rubber Mixer Machine
Continuous Operating Mixing Machine Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous operating mixing machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running. It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous operating mixing machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running. It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long. It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
1'with ce and iso9001-2000 certificates 2'finest workmanship, high quality at reasonable price 3'good reputation widely Main uses: This rubber cutting machine is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
