Rough Emerald Point Pendant Suppliers and Manufacturers

Grass Jelly is a herbaceous plant, 40-60 cm high, it usually spreads on the ground. On its body, the hair is rough and when it gets old, it will turn red - pink, if it is dried, it will turn dark gray Grass Jelly leaves can only be processed after drying. Stick and leaves are harvested (dried for storage), crushed. From stem powder and dried leaves are used to cook jelly jelly as a refreshing drink. in addition, starling stem powder is used as a processed food

Patola Patra (Pointed Gourd), Packaging Type: Standard Price - Rs 120/ Kilogram Product Specification Packaging Type Standard Dried Yes Minimum Order Quantity 1 Kilogram Product Description Description : Patola Patra Trichosanthes dioica or pointed gourd is recommended in liver disorders. It nourishes the liver and corrects all its functions. Working of the digestive system and the skin health are directly related with the working of liver. So Patola Patra also benefits in these conditions also. Details: Sanskrit Name :Bijagarbha, Karkasa, Karkasacchada, Kulaka, Meki, Pallava, Parvagi, Parvara, Patola, Patolah, Patolam, Patoli, Piluparnika, Putulika, Rajanama, Rajapatola, Rajiphala, Supathya, Vrittabija Hindi Name :Palval, Palwal, Parvar, Parwal Bengali Name :Potol, Patol English Name : Kannada Name :Kahi-padavala Malayalam Name :Kattu-potolam, Patolam Medicinal Uses : Patola Patra is recommended as a supplement in all liver disorders; it can also be consumed by a healthy fellow. Root paste is used in headache as it is an analgesic, hair strengthening, helps in wound cleansing and healing. Additional Information Item Code H10 Delivery Time 5 days Port Of Dispatch Jhansi Production Capacity 10 ton Packaging Details As Per Client Requirement Payment Terms L/C (Letter of Credit)/D/A/T/T (Bank Transfer)/Other

Beauty of Joseon, Apricot Blossom Peeling Gel This is a gommage type exfoliant containing 19% Prunus Mume Flower Water and 8% plant-derived Cellulose. It helps to improve skin troubles caused by rough skin texture and excess sebum. - Gommage texture The gommage texture minimizes skin irritation. As the plant-derived cellulose is worked onto the skin, it gently exfoliates dead skin cells and skin wastes. It can be used on the both face and body. - Moisturization Containing 19% prunus flower water and 8% plant-derived cellulose, it helps make the skin texture soft and moist.

Descriptions: Cuttlebones are an excellent calcium source for birds. The rough edible surface helps to trim the beaks of birds as well as provide something for your bird to chew on. The cuttlebones can also be cut into smaller pieces or ground into a powder and used as a nutritional supplement for all types of birds. Features: Provides natural calcium and minerals Derived from natural cuttlefish Natural surface keeps beaks trim and sharp Suitable for cockatiels Specification: Material: Cuttlefish bone Size: 5~20cm Quantity: 3~5 Pcs/bag Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Contents: 1 Bag x Cuttlefish Bone

Take 100gms of instant jam mix in a vessel and add 150ml of water(For 1 cup of jam mix 1 1/4cup of water). Mix well without lump formation. Boil the mix for 5 mins and reduce the burner level to simmer. Hold it for 5 minutes without stirring or until it reaches setting point of 1040C at low flame. Allow the jam mix to cool. Transfer the mix to sterilized container.

Seagrass belly basket The seagrass belly basket is a traditional home essential that has stood the test of time. Originating from Asia, this timeless storage staple is perfect for any room and adds authentic character to your space. A wonderful accompaniment to the bedroom, fill the Bali basket with soft throws, towels or linen. Available in three handy sizes, they also make the perfect outer holder for house plants. Due to the belly style design of this basket, please add an additional 10cm in diameter when considering the widest point.

We are supplier and exporter of Paraffin Oil. Light Liquid Paraffin Oil IP is highly purified mixture of liquid saturated hydrocarbons obtained from petroleum and is highly paraffinic in nature. Light Liquid Paraffin oil is transparent & free from fluorescence in daylight. It is colourless, tasteless, and odourless when cold. Light liquid paraffin oil IP highly refined hydro-treated oil has excellent thermal & chemical stability, having high flash point & is soluble in Chloroform & solvent Ether.

We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�?�°C to 1250�?�°C with a boiling point of 2355�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.

The perfect Mexican style party hat: the Sombrero! This hat is handmade in Vietnam woven from natural palm leaves and then dyed. Good quality - multiple use possible. Size to fit adult head Channel the spirit of Mexico in our stylish sombrero. Featuring a serape trim around its wide brim and high pointed crown, this sombrero coordinates with your colorful, genuine Mexican serape and will shield you from the sun on a hot summer day at any poolside fiesta; it also completes your ensemble for any of the important Mexican holidays like Cinco de Mayo you're preparing for or makes a western Mexican cowboy hat for Halloween.

We are exporter of Arabic Gum Or (Acacia Gum). Organic Gum Arabic (Acacia) is an emulsifier for flavor oils and essential oils, making them stable in water-based compounds. A 30/70 ratio of gum to water is recommended as the best starting point for a Gum Arabic solution. It can be mixed at a 6/1 ratio of gum to oil. It can be used in cosmetics, baking, and as a fiber supplement. Organic Gum Arabic (Acacia) is vegan, kosher, and gluten-free. The Sudanese Organic Gum Arabic Acacia Senegal Heshab is the best in quality all over the world.

We are supplier of Potassium Sulphate 100 % Water Soluble, K2O : min 50 %, Chloride : Max 1 % Use: Agriculture Fertilizer K2SO4: 92% min K2O: 50% min Chloride: (0.5+-0.2) % Ca: (1.6 +- 0.1)% Mg: (0.09 +- 0.00)% Fe: (0.05 +- 0.01)% Na: (2 +- 0.2)% Moisture: (0.2 +- 0.01) % Melting Point: 1067 Deg Celsius pH: 3+-1 Solubility in Water: Soluble Bulk Density: 1.1 gm/cm^3 Potassium Sulphate also is known as Sulphate of Potash, is 100% water soluble source of Potassium (K) and Sulphur (S), It can be used in the greenhouse, open field for vegetables, cereals, oilseeds, lawn, turf, and nurseries

Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%

Soybean Oil" is a vegetable oil that's extracted from the seeds of the soybean plant. Between 2018 and 2019, around 62 million tons (56 million metric tons) of soybean oil were produced around the globe, making it one of the most common cooking oils available. Physical Characteristics Physical State : Liquid Appearance : Light Yellow, Clear and Brilliant Taste : Bland Odor : Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 - 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF Fatty Acid Properties Typical Fatty Acid Profile (major acids) Type Name C14:0 Myristic 0.1% C16:0 Palmitic 8.0 - 14.0 % C16:1 Palmitoleic 0.0 - 0.2% C17:0 Heptadecanoic 0.0 - 0.1% C17:1 9-Heptadecenoic 0.0 - 0.1% C18:0 Stearic 3.0 - 5.0 % C18:1 Oleic 20.0 - 32.0 % C18:2 Linoleic 47.0 - 57.0% C18:3 Linolenic 5.8 - 8.2 % C20:0 Arachidic 0.1 - 0.5% C20:1 Eicosenoic 0.2 - 0.3% C22:0 Behenic 0.2% C24:0 Lignoceric 0.0 - 0.1%

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Cassia Cinnamon Stick Our Cinnamon is exclusively imported from a single estate java island, Indonesia. On every part of the mountain, our beautiful cinnamon trees are traditionally and naturally grown without the use of pesticide, and human interference. Every 20 years, cinnamon trees naturally grow in a vast mid-java area and should be ready for harvest. At the same time, our dedicated grower plants the seeds and in six months the seeds produce a plant that is 50-60 centimeters high. At this point, our growers replant the cinnamon sprout in the growth. Next, as the plants produce more seeds, we distribute them to all of our long partnership farmers. Our dedicated farmer peeling the bark at the same location where the tree was chopped down. Sometimes, our farmers stay overnight to do the work. Once the bark is collected, it will be distributed to the warehouse for a sun-dried process. In the warehouse, our team grades the bark, removes sticks, other materials and eventually ties the barks in a bundle. Finally, we cut the sticks and bundle them together for retail ready and pack into a jar based on your choice/preference.

SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.

This cake making machine can achieve fixed point filling and mobile filling according to different containers and sizes, and can produce cupcakes, model cakes, puff cakes, and Qifeng cakes. capacity 90-180pcs/min ,cake weight 20-500g/pcs . Also can design the Cake Production Line with bakery oven ---Print parttern or logo for client customized .