Add 1 tablespoon (Approx. 13 g) of Soup mix of this pack to 150 ml (Approx. 1 Cup) of Water. Mix the contents well and boil for 5 minutes in medium flame. Nutritious Moringa leaf soup is ready to relish.
Add 1 tablespoon (Approx. 13 g) of Soup mix of this pack to 150 ml (Approx. 1 Cup) of Water. Mix the contents well and boil for 5 minutes in medium flame. Nutritious Agathi Keerai soup is ready to relish.
n product. Texture Feature: Light creamy to white color fine free flowing powder, free from rancidity and foreign matter. Specification : S.No Parameters Specifications 01 Appearance Slightly red color, fine powder 02 Solublity In Cold Water Min. 20% 03 pH Value OF 20% Solution 5.0 To 7.0 04 Viscosity Of 20% Solution In Brookfield Lvdvii+pro Viscometer ( Spindle No : 2 , Rpm 100 , Temp 800c) 50 to 150 cPs 05 Moisture Content, (w/w) Max. 13% 06 Bulk Density, Gm/ml 0.55 To 0.7 07 Ash Content Max. 10 % Application : Coat a piece of washed chicken in this dry mix powder. Then dip the coated chicken piece in the batter* until evenly wet. *Batter preparation: Dissolve 50 g instant crispy fry mix in 85 ml of water. Again roll the dipped chicken piece in a dry mix powder. Fry these coated pieces in a hot oil until it turns golden brown color. Note:100 g of instant crispy fry mix is enough for making 250 g of crispy runchy chicken. Storage : Exhibits excellent stability when stored in closed container under cool and dry ventilated place . Avoid direct sun light. Packing : Available in 25Kgs net weight paper bags with moisture proof line inside.
Effective home remedy for rheumatoid arthritis and nervous breakdown Relieves menstrual cramping and dysmenorrhea Has powerful anti bacterial properties Procedure 1.Add 1 tablespoon (Approx. 13 g) of Soup mix of this pack to a bowl 2.Pour 150 ml (Approx. 1 Cup) of boiling Water 3. Mix the contents well avoiding lump formation. Nutritious Mudakathan Keerai Soup is ready to relish
***SOLID BAMBOO POLE*** Specification: + Color: Natural. + Origin: Vietnam. + Thickness (mm): 3-5. + Diameter (mm): 14/16/18/20/24/27/32/38/45/50. + Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. + Packing: 50pcs/bundle.
Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.
BAMBOO POLE Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.
BAMBOO POLE Color: Natural. Origin: Vietnam. Thickness (mm): 3-5. Diameter (mm): 14/16/18/20/24/27/32/38/45/50. Process: Cut in proper length, steam at 1000 degree for 20mins, clean well, dry at 150 degree until the moisture reach 15%, sort into bundles. Packing: 50pcs/bundle.
Foodix - Offering Instant Mysore Pak Mix. Product Description 1. In a pan, empty the contents of this pack and add 70 ml (Approx. 1/2 cup) of water and mix well without lumps. 2. Cook for 10 minutes in medium flame with continuous stirring & add ghee (Approx. 200 ml) at frequent intervals during the process. 3. Apply Ghee in a plate & transfer the Mysore Pak. Decorate with Nuts/Dry fruits of your choice if needed. Cut into pieces once it is cooled.{Ideally cutting is done when it is slightly warm only to avoid breakage} Serving size Approx.25g Grams of MysorePak, can be cut to 14 pieces.
We supply best quality ICUMSA 45 and Icumsa 150 Origin Brazil or India or Thailand Specification White Refined Cane sugar - Polarization : 99.80% Min Ash content : 0.04% Max Suphateash Content : 00.04% Maximum Moisture : 0.04% Max Solubility : 100% dry Free Flowing Radiation : Normal without Presence of Cesium or Iodine Certified Granulation : Fine Smell : Free of any Odor Reducing Sugar : 0.05% Maximum by Weight Fumigation : Well Cleaned from Molds, Unnatural Odors We offer granulated sugar in a variety of textures from very fine or ultra-fine to regular or coarse sugar granules. Packing details : 5 kgs, 10 kgs, 25 kg & 50 kg
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
THINTEXOTM-Modified Starch Low viscosity modified starch for warp yarn sizing SPECIFICATIONS Appearance : off white to cream colour fine free flowing powder Solubility : Insoluble in cold water pH value( 15 % aqu. soln) : 5 to 7 Viscosity of 15% soln : Max 60 cPs (Brookfield viscometer ( Spl.2 , rpm:100 @ 80oc) LVDV II+ pro) Moisture content (w/w) : Max 13% Ash content (w/w) : Max 0.5% Sieve Retention (60 Mesh) : Max 1% Bulk density (gm/ml) : 0.45 to 0.55 SPECIAL FEATURES : Constant viscosity. Optimum penetration & film formation. Better flexible film . Easily de sizable product . Warp- break reducer. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY - Stable for one year from the date of manufacture PACKING - Available in 50Kgs Net weight PP Bags with a moisture-proof line inside.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
Different capacity drying noodle making machine ,fresh noodle making machine long noodle making machine paste Italy noodle spaghetti making machine : Name Model & Parameters Qty set Note Automatic Hang Noodle Making Machine 5-260model, machine size 3*0.6*1.2m, voltage 380V,3KW, weight 440kg, capacity 150-200kg/h 1 Attached 3pcs cutter. 100 pcs hanging noodle poles Welcome order !
POSH Perfumed body spray Men has Odor Fighting Active which contains IPMP (Isopropyl Methylphenol) which prevents germs that cause body odor. POSH, with a special formulation from Lion Japan, can be used on parts of the body and does not cause stains on clothes or clothing. Available in 5 variants : - Cool Blue - Black Gold - Red Extreme - Brown Legacy - Green Motion Size : 12 x 150 ml
POSH Girls Perfumed body spray has Odor Fighting Active which contains IPMP (Isopropyl Methylphenol) which prevents germs that cause body odor. POSH, with a special formulation from Lion Japan, can be used on parts of the body and does not cause stains on clothes or clothing. Posh has different perfume characteristics in each variant, and its long-lasting fragrance is ready to accompany your activities all day. Available in 5 variant : - Love song (red) - Blaze Pink (pink) - Wishes (green) - Summer Love (purple) - Fresh Spirit (blue) Ready in size : 12 x 150 ml
Anti Dandruff with conditioner Dryness-free Anti-Dandru Shampoo, ENHANCING HAIR STRENGTH &GROWTH
Kodomo Baby Foaming Body Wash Strawberry Foaming Bottle 250ml is a bath soap offered by Kodomo which can provide extra softness and fragrance for babies. This bath soap is enriched with vitamins C, E and an anti-bacterial formula and is gentle on the skin. Kodomo Shampoo Foam is a children's hair shampoo offered by Kodomo in the form of foam which comes with pro vitamin B5 and conditioner which maintains the health, moisture and softness of children's hair. Available in 2 variant: -Strawberry -Orange Ready in size bottle 24 x 250 ml
Chemical Results: Results: Moisture (%) 3.9 Milk Fat ((%) 26 Ash (%) 7.0 Protein (dry basis %) 100 Lactose (%) 55.2 UDWPN (mg/g) 2.4 Insolubility Index (mL) 1.0 Acidity (%) 0.10 Bulk Density (g/mL) 0.685 Scorched Particles Standard A pH (50 g/l water at 20 Degrees C) 6.59 Micro Results: Results: Antibiotics Negative Phosphatase (ug/ml) < 6 Salmonella (per 375 g) Not Detected Coliforms (per 0.1g @ 30 Degrees C) Absent Standard Plate Count < 5,000 Moulds (per g) < 10 Yeast (per g) < 10 Thermophilic Bacteria (per g) 150 Thermophilic Spores (per g) < 10 Mesophilic Spores (per g) 60 Thermoduric Bacteria (per g) 250
