Car bundles. All plastics and fluids have been removed.
Rhino Tech A two part screen adhesive for synthetic mesh to wood or metal frames Application : Suitable for Wood,Metal, Alluminium Frames Packing : 900gms Std Packing : 9/18 units (for 900gms)
* substitute of 'LOCTITE 401' * EU RoHS compliant product * Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments. * Cures at room temperature (20C to 30C) and does not require special curing equipment. * Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines. * Transparent and low odor. Works well with any use and material to give a clean finish. * Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
;Key Features .Two-part : mixture addition type silicone adhesive 2.Low hardening shrinkage 3.Excellent electrical insulation in high temperature and stability 4.Good waterproof and moisture resistance 5.Excellent flame resistance, UL No: E34099 ;Typical Applications Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc. ;Technical Data Table PROPERTY STANDARD/UNITS VALUE of SI2230 ---- ---- PART A PART B Color Visual inspection white / black viscous liquid white viscous liquid Viscosity 27;C, cps 6;¨¤500 6;¨¤500 Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05 Mixture ratio Mass ratio A:B=00:00 Viscosity of mixture 27;C, cps 6;¨¤500 Operation time 27;C, min 60¨¤0 Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min Cured appearance ---- White/ Gray-black elastomer Hardness Shore A 56;¨¤5 Thermal conductivity W/mK 0.80 Linear expansion coefficient K-, ppm 300 Dielectric strength kV/mm, 27;C Y20 Volume resistance DC500V, ohm-cm .¨¢05 Loss factor MHz 0.009 Dielectric constant MHz 3.00 Application temperature C -60~200 Flame resistance UL-94 V-0 Part A--0 KG/Bucket, Part B--0 KG/ Bucket.
One Component Thermal silicone Grease/Lubricating silicone Grease CAS No.:67763-03-05 Other Names:adhesives sealants MF: mSiO2nH2O EINECS No.: 231-545-4 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,ceramics,air filters/steam irons Brand Name: SEPNA Model Number:SI1101 Type:one-component Product name:Thermal silicone Grease/Lubricating silicone Grease Color:White Paste Density: 2.2 Thermal conducivity: 1.5 Packing: 2 KG/Bucket Certificate:SGS, ISO9001:2008, MSDS, RoHS,Reach ODM/OEM:Accepted Shipping:By Express(Fedex, UPS ,DHL,TNT) Samples::Free samples sample time: within one week Packaging Details:Package for Thermal silicone Grease 2 KG/Bucket Delivery Detail:10 days
Adhesive glue is made of MDI , HDI, plasticizer, polyther, antistalin, oxygen absorbent etc one component environmental protection PU adhesive for paving applies to air permeability and compound running tracks and courts Environmental Protection PU Adhesive for Rubber Tiles Packaging: 200kg/drum galvanization iron drums Delivery Detail: 7days Primer for asphalt and concrete base MDI based No bad smell One component PU adhesive is used for rubber tiles, there's no stimulating odor during process
It apply to kitchen & bathroom countertops, hotel worktops . It can fabricate a seamless benchtop, sink and splashback package, offering a hygienic solution that is well-suited to kitchens, food preparation areas, healthcare and bathroom environments as an alternative to stone, granite and marble benchtops. Solid surfaces adhesive are also ideal for bathroom vanity tops with integrated basins. The introduction of adhesive Chma600 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified polyester sheet, thermoplastic plastic, grp, aluminium alloy.
¡¡adhesive for fire rated door (such as bond metal plate and rock wool , bond metal plate and perlite board, bond metal plate and aluminum silicate fiber , bond metal plate and glass wool , bond steel plate and eps board , bond steel plate and xps board, bond steel plate and gypsum board, bond metal plate and rock wool, bond metal plate and perlite board , bond metal plate and aluminum silicate fiber) Adhesive for fireproof door Adhesive for fire resistant door Adhesive for hollow metal door £¨such as bond metal plate and aluminum honeycomb , bond steel plate and aluminum honeycomb , bond metal plate and paper honeycomb , bond steel plate and paper honeycomb£© Adhesive for steel door Adhesive for stainless steel door Adhesive for burglarproof door Adhesive for antitheft door Adhesive for security door Adhesive for steel fire rated burglarproof door Adhesive for baking varnish steel door Adhesive for wood fire rated door Glue for fire rated door , glue for fireproof door , glue for fire resistant door , glue for hollow metal door , glue for steel door , glue for stainless steel door , adhesive for metal plate to polystyrene foam , adhesive for metal plate to plywood , adhesive for metal plate to melamine board , adhesive for metal plate to mdf board)
Features: with fast adhesion, it can quick repair redwood, whitewood and rapidly bond lamp house cloth etc. Usage: make the contact surfaces clean, smooth and dry, put the glue on one surface and put the two surfaces together, press them for 10 seconds until they are bound.
On all types of substrates, it is most suitable for wood, sculpture, utensil, craftwork, metal, paper, leather, toy, lamp house etc, also it owns such sound features as high strength.
Property: Single constituent; neutral & solidified; high intensity; fast solidification; weathering resistant; excellent sealing performance; good compatibility with neutral silicone sealant and weathering adhesive . Use: 1) Cementation and seal of various glass, stone (granite & marble), aluminum plate curtain wall, glass sky light and metallic structure projects 2) Various glass assembling projects 3) Secondary cementation & seal of hollow glass and cementation & seal of al-alloy door & window. 4) Some other building and industrial uses no corrosion on metal, coated glass, aluminum section and marble . Storage: Keep in dry place; keep a storage temperature below 25óJ to prolong its service life; a nine-month guarantee . Optional color: black Packing Specification: 300 ml (net capacity) hard package or 590 ml (net capacity) complex aluminum foil soft package (the actual weight is subject to final products)
Tiandiao hot melt adhesive, softening point of 80 degrees or so, this series product is suitable for display showcase display ark of goods such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, extra adhesive, suitable for all kinds of working environment. Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with adhesive. The products have been certified by sgs, which is non - toxic. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
FEATURES Elastic attachment adhesive for disposable hygiene products. excellent creep performance on all types of elastic, especially synthetic rubber. Has excellent adhesion to PE, PP and NW. also can be applied as a construction adhesive. APPLICATION For NONWOVEN SIDE TAPE PRODUCTION STORAGE Store in a dry place where the temperature is below 40ºC and the storage life is one year. PRECAUTIONS 1.Do not mix with other adhesives. 2.Keep containers and pre-melters covered to avoid contamination. 3. Material is applied hot. Appropriate clothing and eye protection should be used. 4. Rotate stock - first in, first out. APPEARANCE Light Yellow Solid SOLIDS 100%
Properties: 1.Good coating ability,basically no white dot and bubble. 2.When laminating aluminum coated film,please do test first,avoid aluminum layer transfer. 3.It not fits boiling packaging film. Parameters: Model No.: PU-9075D Color: Light yellow transparent liquid Solid content (%):75¨¤2 Solvent: Ethyl acetate Viscosity (mPa.S 25): 2000¨¤500 Mix proportion: 5:1 Main agent: 20 kg/ pail Hardener: 4 kg/ pail
CHIPKO SW is a fast drying Water based adhesive which has excellent bonding properties and ability to give brilliant tensile properties in its bond made with the substrates. Product has long shelf life and high ease of application. The product has good drying speed and gives excellent coverage. It is perfect to bond wooden laminates to wood, wood to wood and other wooden applications where high quality performance and good working cost is the key. Application CHIPKO SW can be applied using hand roller, glue applicator, hand comb applicator etc. A consistent fine coat and care while application will give best possible results in terms of coverage and faster drying. Usage and storage condition CHIPKO SW has an adequate antimicrobial dosage to prevent the microbial contamination during the shelf-life and has a shelf-life of 12 months starting from the date of receipt if it stored in the original/unopened containers at temperature between 5 and 40 C. The opened containers should be kept away from heat sources and direct sunlight. Open containers should be have their lids tightened when not in use.
This series product viscosity is extremely strong, white stick or granular, also has the yellow granular and stick, softening point of 80 degrees or so, short curing time, widely used for automatic packaging, carton packaging and color box packaging and other kinds of packaging requirements, guarantee the stability of adhesive products to the greatest extent, no deformation, ensure the quality of the goods packaging, do not package materil. The product is based on a number of similar products in china, and a new kind of single-group strong adhesive is introduced according to the user's requirements. It is suitable for the bonding of carton, paper box, automation, color box and other products. Products which use it are firm and smooth without extra adhesive. The product has wide applicability, stable quality and has been well received by users since it was launched. First, the film products need to be treated with adhesive and then apply the adhesive evenly to the surface with a brush or scraper. The coating thickness is between 0.1 and 0.5mm, according to the paper degree. Hold it at a stop, then add pressure, and after 24 hours, it will be bonding.
This series of products are suitable for all kinds of sealing mouth glue, softening point of 80 degrees or so, mainly for the bottom of the bag, carpet glue, carpet ruffled, express single seal, wood sealing side, automotive interior bonding, arm in arm bag on the ground, dialysis paper, paper bag sealing glue sealing purpose, guarantee the bonding material without extra adhesive, stability, safety and health, no harm to human body, no taste, using at ease. Suitable for carton sealing, milk powder box, other color box and other sealing or bottom, side bonding with hot melt adhesive. Open time moderate, very excellent low - temperature resistance. - 20 below zero remains very strong cohesive force. It has very good temperature resistance. The product has good weather resistance and strong adhesion.
This product is used for bookbinding, cartons, bags and other light adhesive non-woven fabric, the td-1018 strongest viscosity, as the rubber type hot melt adhesive, softening point of 80 degrees or so, for granular or massive viscosity is extremely strong, the maximum extent to ensure adhesive of robustness, do not come loose page, page not to drop, does not glue, to ensure the stability of the adhesive. Professional for all kinds of binding books, such as textbooks, specifications, periodicals, etc. Appearance: milky colloidal particles (gum) transparent white colloidal particles (edge glue) ingredient: eva specification: 25 kg/bag storage: as for a cool and dry place instructions: 1) open and curing time will as the working environment temperature, the temperature of the glue, pressing time and pressure maintaining power and change. 2) different hot melt adhesive should be selected according to different paper. Using temperature shall not exceed 200 â??, lest cause coking decomposition, also cannot use temperature below, otherwise the lower bonding strength; suggest that the temperature 150-180