Model yg12 yg15 yg18 yg20 yg24 yg28 yg30 yg48 Output kg/hr 75 150 200 250 300 350 400 600 Motor hp 10 15 15 20 25 25 30/40 50.
We supply Co-rotating parallel twin screws extruder for PE/PP filling with high percentage of up to 82% CaCO3/ 60%Talc/70%TiO2/45%Carbon powder/and 30% inorganic and organic pigments. Salient Features of co-rotating twin screw extruder EC52: 1) Main motor 55kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 150~200kg/h 5) One mixer, one main feeder and one side feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Strand cutting unit with water bath, air blower, pelletizier and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PE/PVC /HFFR/ (peroxide and silane based) XLPE cable material compounding. All the raw material will be feed into twin screw extruder first for compounding. Then falls into single screw extruder for cooling down and extrusion. Salient Features of two stage extruder EC65/TDD180 for PVC: 1) Main motor of twin screw extruder 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 400~600kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) One single screw extruder with motor 55kw, L/D=9 8) Air cooling die face cutting system with cyclone and classifier 9) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We have two type of Lab machine: Lab22 and Lab30 with three type cutting system: strand, water ring and air cooling die face cutting. Salient Features of co-rotating twin screw extruder Lab22: 1) Main motor 4kw, L/D=42 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 5~15kg/h 5) One mixer, one main feeder and one side feeder 6) Strand cutting unit with water bath, air blower, pelletizier and classifier; 7) Control panel, soft water cooling system and vacuum system are inside the base of extruder. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PA/PBT/PC compounding with flame retardants and up to 30% chipped/long Glass Fiber, PC/ABS alloy, PP/PA alloy, PC/PB alloy, ABS color masterbatch. Salient Features of co-rotating twin screw extruder SAT52: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 300~400kg/h 5) One mixer, one main feeder and one side feeder 6) One soft water cooling system and one vacuum system 7) Strand cutting unit with water bath, air blower, pelletizier and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply twin screw extruder for PLA/PE filling with (cassava/corn/potato)starch, PBS degassing, PLA/PBS alloy and so on. Salient Features of co-rotating twin screw extruder SAT65: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-400rpm 4) The output capacity: 150~250kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Air cooling die face cutting system with cyclone and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
YDC Feed-through jacks are the new designed products in our company, are the upgrades of the primary jacks. 1.Using the new seals, to synchronous strengthen the seal-ability under great pressure. 2.Using special alloy steel with heat treatment process, reducing the cylinders expansion ratio in the tensioning process, so that the life of seals and sealing performance can be improved about 20%. 3.In the tensioning the operating process, jacks is easily damaged under overpressure because of the jack-based pullback cylinder, so we added the overpressure valve on the jacks to pressure production. Meanwhile we improved the original of commonly used structure by wire disc and flanged disc, to make the bearing capacity for oil pressure strengthen, so that enormously reduce the possibility of mechanical damage due to improper operation. In a word, the YDC series feed-through jacks performance is improved, and widely used in pre-stressing and post-stressing construction. Notice: according to users requirement, YDC through jack can be configured preventing turn device which can prevent jack from rotating in the process of stressing. Model: YDC 650 Stroke:200mm, Nominal tension: 600KN Nominal hydraulic:50Mpa. Net weight: 44kg.
GYJ series extrusion machine is the special equipment of making the P fixed- end anchorage. It is light and simple operation etc, and can squeeze BFM 15P and BFM13P extruding set. Model:GYJ 500 Rated extrusion pressure:495KN Extrusion hydraulic: 63Mpa Stroke:150mm Mass:70kg. Overall dimension:760x200x200.
YH30 embossing machine is the special extruding equipment of making the fixed-end anchorage, mainly used for extruding the fixed-end of prestressed strands into pear-shaped scattering shape. After replaced the wedge, it can be used for the other specification of steel strands. YH30 type embossing machine is small in size, light, and easy to operate. Model:YH30 Rated stressing pressure:30KN, Oil pressure:43Mpa, Stroke of extrusion:70mm Mass:11kg. Overall dimension:560x155x215.
Model - YRP 65 YRP 75 YRP 90 YRP 110 Screw dia mm 65 75 90 110 Output Kg/hr 55 75 120 190 Motor HP 10 15 20 30 . Atleast 1 unit.
Model YHDP65 YHDP75 YHDP90 YHDP110 Screw dia mm 65 75 90 110 Motor HP 10 15 20 25 Output Kg/hr 50 75 110 150.
Model YPR90 YPR100 YPR110 YPR125 item HD/LD/LLDP/PP/ABS/HIPS/PVC/PC/Nylon Screw dia mm 90 100 110 125 Motor HP 20 25 30 40 Output kg/hr 90 110 150 180. At least 1 unit.
1 The screw and cylinder are nitrogenation treated and precise processed. So it is hard, wearable and anti-cauterization. 2 The whole set adopts perch brake driving. So the rewinding is very smooth. 3 The electric part adopts brake driving. So it can help to save power 30%. 4 The noise is low, no dust, environmental and power saving. Installing Dimensions (m) 13¡Á1.3¡Á1.2 weight 2000kw.
Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output. Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die. Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling. Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right. Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank. Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error. Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler.
Extruder: It has high speed high efficiency screw, hard gear surface, FUJI invertor. This structure assures the material evenly heating, good plasticization and the extruding speed and efficiency. Corrugator: Close structure. Mold blocks through the gear transmission. Mold plate has water flowing to get cooling efficiency. The pipe cooling type is wind. This structure ensures high speed production and cooling. It can produce inner and outer layer smooth and corrugation uniformity pipe one time matching the corresponding molds. Mold block: The design of structure is reasonable, wind cooling and replacement of the module is convenient and reliable. Winding machine: Torque motor, single/double station winder.
Parameter specification Jo-65jo-70jo-80jo-90 Specification/parameterdouble-shaftdouble-shaftdouble-shaftbig-shaft Pay-off typepn400-630pn400-630pn400-630pn630-800 Pay-off bobbin¬)65¬)70¬)80¬)90 Screw diameter26:1 bm type26:1 bm type26:1 bm type26:1 bm type Screw l:d120140200250 "extrusion Capacity(kg/h)"25hp30hp40hp50hp Main motor power¬)0.8-¬)1.0¬)1.5-¬)12¬)2.0-¬)20¬)3.0-¬)25 Range of wire diameter(mm)"single layer/ U shape""single layer/ U shape""single layer/ U shape""single layer/ U shape" Cooling device 250m200m200m200m Length of accumulating 5hp5hp7.5hp7.5hp Haul-off power500m/min500m/min400m/min400m/min Line speed (max)double axis/axisdouble axis/axisdouble axis/axisdouble axis/axis "take-up Type"pn500-630pn500-630pn500-630pn500-630 "take-up Bobbin"4hp4hp5hp5hp.
1reasonable structure , new , stable , high speed , round trip quality control 2.High automatic & intellect monitoring , perfect winding displacement . 3.Jo-»65+35 double color automobile cable extruder : selected at customerf+s requirement 4.Initiative wire pay-off, flyer pay-off , quincunx take-up, auto coiler take-up and complete plc control.
Brief introduction: This line is applicable to produce HDPE water & gas pipe. Extruder adopts high-efficient screw, two main machines, aircraft nose, charge-in of mould centre, spiral shunting type complex machine head. Adopt PLC angle automatically control. Export packaging.
This series of plastic sheet extrusion line is mainly used to produce extruded sheets from PE, EVOH, PA, EVA, PS, and PP materials. It comes with a single-screw extruder that heats, shears and conveys the material to an extrusion die as well as other shaping and cooling devices to obtain the final shape and size. Depending on the kind of material to be extruded, HANDERN would choose a different screw design with a particular length-diameter ratio, plus a suitable extrusion die. Auxiliary equipment on this extrusion line is similar to that of the PVC profile extrusion line. Processes that taking place on this multi-layer production line include the following: 1. Extrusion 2. Shape formation with the extrusion die 3. Cooling and sizing to obtain the final shape under vacuum or normal operating conditions 4. Conveying 5. Cutting 6. Discharging. The resulting 5- or 7-layer PE, EVOH, PV, EVA, PS, or PP sheet provides a good air and moisture barrier for the food wrapped within it. It traps air between the layers, giving the best protection for the food. Parts Conical twin-screw extruder, vacuum calibration table, conveyor, cutter, film applicator, and tilting rack, etc. Advantages 1. Optimal design of plastic profile extrusion equipment is critical to productive operations. Made with the latest technologies in the world, this extruded sheet production line offers many benefits including uniform plasticization, low shearing rate, high productivity, and a long service life. 2. The main extrusion equipment uses an imported AC or DC adjustable speed drive. It is temperature controlled using the Japanese RKC temperature controller. The auxiliary equipment comes with a brand-name vacuum pump and a traction motor. All these parts are easy to maintain and repair. By simply replacing the extruder barrel and extrusion die, the extrusion line can produce wood-like extrusions that are actually irregular foamed profiles. Applications The corrugated sheet is often referred to as the hollow sheet in China. It is widely used in the jelly, high-grade meat product, instant rice packaging as well as medicine and cosmetic packaging industries. Main Specifications Model No. HDB110-1000 HDB120-1400 Sheet Width 800mm 1200mm Sheet Thickness 0.5-2mm 0.5-2mm Equipment Speed 500mm 600mm Roller Diameter 20m/min 20m/min Production Capacity 300-400kg/h 400-500kg/h
Teflon ptfe extruder Plastic ram extruder machine features: 1, automatic control 2, easy to operate 3, low power consumption 4, product size stability 5, precise sintering 6, environment-friendly and energy-saving Application: Ptfe ram screw extruder products tube, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the tube has a wide range of applications Model no. Machine model pfb-80 Plastic extruder Ptfe Power 20 kw Min - max dia 25-80 mm Tolerance 0.5-2 mm Length Unlimited Production per hour 7kg Electricity consumption per hour 2.5 kw Weight of the machine 960 kg High of the machine 1560 mm Floor area of the machine 1.2 m2 Warrenty for parts 1 year Machine gurantee period 1 year Free spares 1 set Deliver lt 30 days About us: Changzhou sunkoo machine tech co., ltd Professional experience: 10+ years only in the field of the ptfe extruder Manufacturing capacity: 50 sets / year. Technology strength: have a professional and experienced designer team to meet your any requirement Model ptfe series is a single screw extruder for extruding dia lower 150mm rod and dia lower 500mm tube. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Hot tags:teflon ptfe rod;teflon ptfe tube, teflon ptfe extrusion -
