Hi-Rise led street light is a new LED street light released by Hishine Group Limited. The LED street light shell is made of ultra-thin Die-Casting aluminum, which makes the LED street light have good heat dissipation performance. Under the same conditions, the light decay of the LED street light is about 20% less than other ordinary LED street lights. In addition, Hi-Rise LED street light has a unique buckle design, which can easily install the street light on both sides of the road. Hi-Rise LED Street Light Features 1.Waterproof IP65,high thermal conductivity housing 2.Beam angle TypeII,TypeIII,TypeIV,TypeV,25�° 60�° 90�° PC+glass lens 3.Support smart control: photocell, motion sensor, lora, zigbee etc. 4.High lumen SMD3030 chip, luminous efficacy 175Im/w 5.Ultra slim heat sink design makes the lamp lighter and betier in heat dissipation Advantages of LED street lamps Hi-rise LED Street Light is the most cost-effective professional LED street light launched by Hishine Group. Hi-rise was designed to provide customers with tool-free installation, lower maintenance costs, and lower operating costs. Hi-rise LED Street Light features modern streamlined geometry, exquisite design, attention to detail, and outstanding application performance, energy efficiency and system reliability. LED Street Light Beam Angle Hi-rise LED Street Light has obvious advantages in structural strength, corrosion resistance and heat dissipation due to its strong structure and smooth design. Secondly, Hi-rise LED Street Light has excellent light quality. 250 w Lumen Output can reach 43750 LM, Luminous Efficacy is as high as 175 w/LM, and there are TypeII, TypeIII, TypeIV, TypeV, 25 to 60 , 90 a variety of optional light Angle.
We are manufacturing shapes of cubes, flats, pipes, fingers, rounds, pillows, and hexagonal. Size may vary from 18 to 50 mm. It is better to choose charcoal shapes according to the customerâ??s request. The main parameter to choose is ash content â?? how much ash is left after charcoal briquettes are burned down. Less ash is better. We are manufacturing briquettes with ash content of 1.8 â?? 2.2%; 2.2 â?? 2.5%; 2.5 â?? 3.0% and 3.0 and up. The most common ash content is 2.2 to 2.5%. There are a lot of variants to choose from. The basic is an inner box (brand box) of 1 to 5 kg packed inside the master box (10 or 20 kg). The inner box can be made with laminating (glossy or doff), with embossing or gold/silver plating. Mostly inner box is made in full color. The master box can be done in full color or black and white only. It is recommended to use a double wall. It is slightly more expensive than a single wall but makes a box much stronger. Forth step is to confirm your payment details and manufacturing schedule. Keep in mind that production can take up to 2 weeks. Plus we need time of 3 days to pack and staff the container. We provide invoices with specification details. By request, we can sign an additional export contract for you to comply with your country requirements
Introducing our refreshing and nourishing Fresh Tender Coconut! Sourced from the finest tropical regions, this hand-picked coconut is nature's ultimate thirst-quencher and a natural source of hydration. With its crisp and green exterior, you can trust that every sip will transport you to a tropical paradise. Each Fresh Tender Coconut is carefully selected at the peak of its freshness to ensure optimum taste and nutritional value. Bursting with pure, sweet water, this delightful beverage is packed with essential electrolytes, vitamins, and minerals that replenish your body and invigorate your senses. Our coconuts are sustainably harvested and expertly handled to preserve their natural goodness. With a single crack of its shell, you'll discover a refreshing elixir, free from any additives or preservatives. Its naturally sweet and subtle flavor will tantalize your taste buds, making it a perfect choice for a revitalizing drink on a hot day or a post-workout refuel. Not only does Fresh Tender Coconut hydrate you from within, but it also offers numerous health benefits. Rich in potassium, it helps maintain proper muscle function and promotes healthy heart activity. Additionally, the coconut's electrolyte composition aids in balancing your body's fluids and supports optimal digestion. Indulge in the pure essence of the tropics with our Fresh Tender Coconut. Whether you're seeking a healthy alternative to sugary beverages or simply craving a refreshing treat, this tropical delight is a natural and delicious choice. So go ahead, sip your way to a revitalized and hydrated you, one coconut at a time.
Composition of Brucite Brucite is natural magnesium hydroxide, also known as hydrated magnesia. Melting point (dehydration) 340 C, relative density: 2.39, hardness: 2.5, crystal structure: six crystal systems, relative molecular mass: 58.32, solubility: 0.009 g / L. Brucite has a simple chemical composition and its molecular formula is Mg(OH)2. Brucite is a rare high-magnesium mineral in nature. Its theoretical chemical composition is MgO 69.12% and H2O 30.55%. It is often found in brucites produced in nature. Impurities such as Fe, Mn, Zn, Ni, etc., these impurities exist as a homogeneous image, forming a series of continuous or discontinuous solid solution, constituent endmembers: iron brucite (including FeO 10%), manganese brucite (containing MnO 18%), zinc brucite (including ZnO 4%), nickel brucite (including NiO 2.5%). The associated minerals of brucite are serpentine, calcite, dolomite, magnesite, magnesium silicate mineral, periclase, diopside and talc. Use of brucite Brucite is an industrial mineral with special value due to its high content of useful components, low content of harmful impurities, and its unique physicochemical properties, which are different from other types of magnesium-containing mineral raw materials. The main uses of brucite is as below: 1.Flame retardant additives in rubber, plastic and fiber 2.� Flue gas desulfurization 3.Aluminum composite panel 4.Paper industry 5.Agriculture and fertilizer uses 6.Environmental protection field (Wastewater treatment) 7.Magnesia high temperature refractory 8.Fireproof coating 9.Neutralize the treatment agent and adjust the pH value
Handle Ball System Parameters: Product Name Toy Manufacturer Inflatable Colorful Fitness Jumping Ball with Handle for Children Material: PVC Color: Red, green, pink, blue, yellow or Custom Color Size: 45/55cm or Custom Size Logo: Custom Logo MOQ: 200pcs Delivery time: (1)7-10 working days-for existing products (2)10-15 working days-if need customized logo OEM Service: Yes Certification Available: Yes Packing details: Poly Bag+Carton Production Capacity: 80000 Piece/Pieces per Month Payment Term: L/C,T/T,D/P,PAYPAL,Trade assurance Handle Ball Description: For years this has been children's favorite playmate! Stable elasticity of safety and comfort quality let this jumping ball suitable for indoor & outdoor use. Also helps build coordination skills to lose weight by jumping on the back of ball and emerge endless fun, is a great activity that will keep kids active for hours. It's made of durable vinyl material with a textured bottom for additional support. To meet different people group needs from children to adults of different builds as we offer different suitable size.Product contains no phthalates, so it is safe to play with. Easy to store & is travel friendly as well.It can also be used inphysical therapy, athletic training, exercise and weight training, with below functions: 1. Melts away abdominal fat 2. Enhance functional movement 3. Muscle tone and muscle strength 4. Core strength 5. Greater flexibility 6. Improve cardiovascular fitness level 7. Balance & coordinate of muscles, stabilize the spine and control of proper posture Bingehua specializes in the production and export of fitness accessories, body-sculpting and power training goods, mainly including yoga ball, Resistance Band Loop, Half Balance Ball, etc. Our own factory was founded more than 10 years.
Jumping Animal System Parameters: Product Name Kids Play Non-slip Inflatable Children's ToyInflatableJumpingAnimal Material: PVC Color: Red, Yellow, Green, Blue or Custom Color Size: 51*26*60cm or Customize Logo: Custom Logo Weight : 1250-1600g MOQ: 100pcs Delivery time: (1)7-10 working days-for existing products (2)10-15 working days-if need customized logo OEM Service: Yes Certification Available: Yes Packing details: Poly Bag+Carton Production Capacity: 11000 Piece/Pieces per Month Payment Term: L/C,T/T,D/P,PAYPAL,Trade assurance Jumping Animal Description: For years this has been children's favorite playmate! Eco-friendly and Durable use in daily life.This jumping animal is suitable for indoor & outdoor use. Also helps build coordination skills & is a great activity that will keep kids active for hours. It's made of durable non-toxic and tasteless vinyl material with a textured bottom for additional support.Non-slip,Waterproof and moistureproof. Product contains no phthalates, so it is safe to play with.High-densify material, extra cushion, and responsive to reduce injuries. Easy to store & is travel friendly as well. It can also be used inphysical therapy, athletic training, exercise and weight training, with below functions: 1. Melts away abdominal fat 2. Enhance functional movement 3. Muscle tone and muscle strength 4. Core strength 5. Greater flexibility 6. Balance & coordinate of muscles, stabilize the spine and control of proper posture 7. Improve cardiovascular fitness level 8. Contribute to children's visual development. Bingehua specializes in the production and export of fitness accessories, body-sculpting and power training goods, mainly including yoga ball, Resistance Band Loop, Half Balance Ball, etc. Our own factory was founded more than 10 years.
Metal scrap, used rail, new rail, aluminium, copper cathode, copper scrap, copper wire, copper ore, iron ore, sesame seeds, sisal, wheat, cooking oil, sunflower oil, sunflower seeds, soybean seeds, fly ash, coal, cement, clinker, timber, hardwood, aloe vera, myrrh resin (commiphora myrrha) extracts, frankincense, gums, charcoal briquettes, goat meat, beef, alfalfa hay bales, lucerne hay, camel meat, avocados, cut flowers, soybeans, cumin, sugar, white & yellow maize, tea, coffee, black pepper, cardamon, chickpeas, cotton seeds, flax seeds, white pepper, vanilla, beans, sisal fiber, cinnamon, cloves, essential oils, cashew nuts, red kidney beans, macadamia, cobalt, coltan, lithium ore, light cycle oil, diesel en590, euro 6, gas oil, virgin fuel oil d6, aviation kerosene, jet fuel a1, liquefied petroleum gas, liquefied natural gas, crude oil, petroleum coke, granular urea, automotive gas oil (ago), cowpeas, beans, aircraft charters, livestock charters, shipping slots, warehouse space..
We are an agency that represents a seller that offers Aviation Jet Fuel A1 competitive conditions. The origins are NONSANCTIONED TANK TO TANK (TTT) or TANK TO VESSEL (TTV). We are only interested in real buyers. At first the seller will only contact the buyer through the agents, and only real buyers will be directly contacted once all documents are completed, provided and verified. PRODUCT DETAILS 1. Commodity: Aviation fuel Jet A1 2. Origin: the country is not under sanctions (Seller option) 3. Specification: Standard Export Quality 4. Quantity: Trail shipment Starting from second shipment: 1,000,000\2,000,000 BBL (One\Two Million) Barre, with a variation of +/- 5% (Plus / Minus Five Percent) Up to 2,000,000 BBL (Two Million) Barrel, with a variation of +/- 5% (Plus / Minus Five Percent) with R&E by agreement between the seller and the buyer; 5. Terms of Contract: Delivery of first shipment is based on the SPOT CI DIP & PAY procedure. The second shipment and subsequent - under a long-term contract. 6. Price: Mean of Platts FOB NWE for JET (PJAAV00) with discount minus Six US Dollar (6 U$D) per BBL. Additional charge of $1 USD IMFPA to be covered by buyer. This brings total discount of $5 USD after taking into account for IMFPA. 7. Delivery basis: FOB Rotterdam (Tank to Tank or Tank to Vessel) 8. Inspection: SGS/SayBolt/Intertek Q&Q  Procedure: 1. Potential buyers provide CIS/KYC + TSA info and a redacted bank statement to enable the due diligence process. 2. Within 48 hours DD will be finalized 3. Seller provides FCO 4. Buyer sends ICPO, POF (MT199) 5. Buyer and agents prepare contract with each other 6. Seller submits CI and FULL POP as follows: 1. Quantity and Quality Certificate (SGS) 48hrs fresh 2. Tank Storage Receipt (TSR) 3. Product Passport (Dip Test Result) 4. Authorization Letter to Verify the Product with the Tank Farm 5. Authorization to Sell/ Collect (ATSC) 6. Dip Test Authorization 7. Seller issues the following documents to all Intermediaries and the Buyer endorsed NCNDA/IMFPA 7. Buyer arranges dip test by his SGS team (Optional) and effects payment by MT103 or TT wire transfer for the total product available. 8. Seller change title of ownership to buyers name and buyer lifts the product.
We are an agency that represents a seller that offers DIESEL EN590 10 PPM at competitive conditions. The origins are NONSANCTIONED TANK TO TANK (TTT) or TANK TO VESSEL (TTV). We are only interested in real buyers. At first the seller will only contact the buyer through the agents, and only real buyers will be directly contacted once all documents are completed, provided and verified. PRODUCT DETAILS 1. Commodity: Ultra-Low Sulphur Diesel Gasoil EN590 10 PPM 2. Origin: the country is not under sanctions (Seller option) 3. Specification: Standard Export Quality, EN 590 4. Quantity: Trail shipment Starting from second shipment: 100,000 MT (One Hundred Thousand) metric tons, with a variation of +/- 5% (Plus / Minus Five Percent) Up to 200,000 MT (Two Hundred Thousand) metric tons, with a variation of +/- 5% (Plus / Minus Five Percent) with R&E by agreement between the seller and the buyer; 5. Terms of Contract: Delivery of first shipment is based on the SPOT CI DIP & PAY procedure. The second shipment and subsequent - under a long-term contract. 6. Price: Mean of Platts FOB NWE for ULSD 10 ppm (AAVBF00) with discount minus Sixty US Dollar (60 U$D). Additional charge of $5 USD IMFPA to be covered by buyer. This brings total discount of $55 USD after taking into account for IMFPA. 7. Delivery basis: FOB Rotterdam (Tank to Tank or Tank to Vessel). 8. Inspection: SGS/SayBolt/Intertek Q&Q Procedure: 1. Potential buyers provide CIS/KYC + TSA info and a redacted bank statement to enable the due diligence process. 2. Within 48 hours DD will be finalized 3. Seller provides FCO 4. Buyer sends ICPO, POF (MT199) 5. Buyer and agents prepare contract with each other 6. Seller submits CI and FULL POP as follows: 1. Quantity and Quality Certificate (SGS) 48hrs fresh 2. Tank Storage Receipt (TSR) 3. Product Passport (Dip Test Result) 4. Authorization Letter to Verify the Product with the Tank Farm 5. Authorization to Sell/ Collect (ATSC) 6. Dip Test Authorization 7. Seller issues the following documents to all Intermediaries and the Buyer endorsed NCNDA/IMFPA 7. Buyer arranges dip test by his SGS team (Optional) and effects payment by MT103 or TT wire transfer for the total product available. 8. Seller change title of ownership to buyers name and buyer lifts the product.
Product Name: Acid Thickener Chemical Name: Ethoxylated Fatty Amine CAS Number: Not applicable (proprietary blend) Description: Acid Thickener is a specialized chemical additive used primarily as a thickening agent in acid-based formulations. It is formulated from ethoxylated fatty amines, designed to increase the viscosity and improve the clinginess of liquid cleaning products, especially acidic solutions. This versatile product enhances the performance and aesthetic appeal of various household and industrial cleaning formulations. Appearance: Acid Thickener typically presents as a clear to pale yellow viscous liquid with a characteristic mild odor. Key Features: Viscosity Enhancement: Significantly increases the viscosity of acidic solutions, improving their efficacy in clinging to vertical surfaces. Improved Dwell Time: Enhances the contact time of cleaning solutions on surfaces, optimizing cleaning performance. Compatibility: Compatible with a wide range of acidic cleaners and formulations. Ease of Formulation: Easily disperses and integrates into formulations without requiring high shear mixing. Versatile Application: Suitable for toilet cleaners, descaling agents, and other acid-based cleaning products. Applications: Household Cleaning Products: Toilet Bowl Cleaners Bathroom Cleaners Descaling Agents Industrial Cleaners: Metal Cleaners Acidic Degreasers Brewery and Dairy Cleaners Institutional Cleaners: Commercial Kitchen Cleaners Institutional Toilet Cleaners Technical Specifications: Appearance: Clear to pale yellow liquid pH (10% solution): 6.0 - 7.5 Viscosity (Brookfield RV, 25�°C): 5000 - 7000 cps Cloud Point: > 50�°C Solubility: Soluble in water Packaging: Acid Thickener is available in various packaging options to meet customer needs: 50 kg HDPE Drums 200 kg HDPE Drums Bulk packaging options available upon request Storage and Handling: Store in a cool, dry place away from direct sunlight and sources of heat. Keep containers tightly closed when not in use. Handle with care to avoid spills. Use appropriate personal protective equipment (PPE) during handling and follow standard safety procedures. Safety and Regulatory Information: Regulatory Compliance: Complies with local and international regulations. Safety Data Sheet (SDS): Available on request, providing detailed information on handling, storage, and emergency measures.
IPS-12RS Syringe Pump The IPS-12RS Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12RS offers unparalleled reliability and performance. Key Features: Wide Syringe Compatibility: The IPS-12RS accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12RS ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12RS offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12RS allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12RS offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12RS enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10�°C and 50�°C Storage Temperature: Between -30�°C and 85�°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-14RS Syringe Pump The IPS-14RS Syringe Pump is a sophisticated dual-channel fluid handling system designed to meet the exacting demands of modern laboratories and industrial settings. Offering precise control and advanced features, the IPS-14RS enables efficient and accurate fluid delivery for a variety of applications. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14RS allows for simultaneous operation of different fluids or independent control over each channel. This capability enhances flexibility and efficiency in fluid handling tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14RS accommodates syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This versatility enables users to handle various volumes with ease. Precise Flow Control: The IPS-14RS offers precise control over flow rates, with a range from 17.89 picoliters per minute to 121.51 milliliters per minute. Equipped with a stepper motor and microcontroller featuring Microstep Drive technology, it ensures accurate and consistent fluid delivery. Intuitive Interface: With a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14RS provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing productivity. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptability ensures precise fluid handling for a wide range of applications. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Allows programming of up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Users can save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
Our CNC turning precision parts are mechanically manufactured and mostly rotationally symmetrical parts that are produced by turning as a manufacturing process. Similarly, we speak of welded parts in welding, laser parts in laser cutting or milled parts in milling. DESCRIPTION OF CNC HARD TURNING What Is CNC Turning? CNC turning is a precise molding process that machines parts by â??turningâ?? a rod material. The rod is fed through to a cutting tool and then material is shaped into a finished product. In the process of making cnc precision turning parts, the cutter is normally fed through a rotating work piece and this rotating work piece typically uses a variety of different angles as well as many different tool shapes. CNC turning is generally used for creating turned metal parts that are symmetrical near their axis. For example a chess pawn would be a part that is symmetrical near its axis. The shapes that you can create using CNC turning vary greatly though and with the addition of other machining processes, the possibilities are endless! While most people use CNC turning to create turned parts that only utilize a single axis, it is also possible to use ones that have more than one axis. This allows for more flexibility. DISTINGUISHES OF TURNING PARTS What Distinguishes Our CNC Turned Parts? Part of our self-image is the continuous investment in our machinery. This is the only way we can guarantee the quality and precision in contract manufacturing for which our customers appreciate us. In the field of CNC turning (Computerized Numeric Control), we rely on automatic lathes and sliding headstock lathes. CNC long turned parts and precision turned parts on our CNC machines can be processed from 3 â?? 600 mm workpiece diameter and a maximum length of 2000 mm. For the production of individual parts or repair work in CNC turning, we also have conventional CNC lathes and automatic lathes with which we can machine turned parts up to a diameter of 400 mm and a maximum length of 1000 mm. If you need any kinds of precise molding, please contact us, as a professional precision molding company, Fangling is willing to offer you high quality products.
Grand Piano Lamp Sale TOPMB professional eye care piano lamp, special design for grand piano which can be clipped to the shelf and light up full music area and keys. Always is the best choice for professional players. Types of Piano Lamp for Grand Piano Benefits of Grand Piano Lamp Asymmetric Optics 45�°angle light to light up the music sheet, no light directly disturbingly hitting your eyes. Which can relieve your eye strain and protect your eyes. High Brightness and Wide Luminous Surface A wide light bar provides an evenly and brightly light full cover of the music stand, no glare and no flicking let you see the music sheet easily and clearly. Timer 2-hour timer function, turning on the timing function when practice can remind you to have a breath after 2 hours of practice. Modern Design Full luxury mirror screen, modern technology sense design, suitable for any grand piano. Flexible Adjustable Light Pole Can adjust the light direction and angle freely, light up the key and whole shelf. With Wireless Control Wireless control allows you to control the light at hand, do not need to stand up and raise your hand, especially for children. TOPMB's Tips to Choose Piano Lamps for Grand Pianos Music readers should always choose piano lights with angle lights to avoid bright lights directed to their eyes and reduce stress when reading music sheets. And for the grand piano, desk lamps are not really suitable because of the structure of the grand piano. A clamp lamp and floor lamp will be a better choice. Choose the right bright and color temperature, calm and bright light without glare and flicking will relieve eye strain. Adjustable color temperature can let you change it as your mood. Hot Questions of LED Grand Piano Lamp î?£ ls it bright enough to read your Sheet music? î?¤ Of course, the lumen of the lamp is > 1100lm, and >2500lux. What's the color temperature? î?¤ There are 4 modes of color temperature,3000K-4000K-5000K-6000K, you can stepless control the color temperature and choose it according to your preference. Does the power cable long enough? î?¤ In addition to the 1.8-meter cord that comes with the adapter, a 3-meter extension cord is also included in the package. As one of home lamp manufacturers, we will do our best to meet all the needs of customers.
In modern animal husbandry, the cryopreservation of bovine semen is a crucial technology. It is not only related to the protection of genetic resources, but also directly affects the reproductive efficiency and quality. Choosing a suitable liquid nitrogen tank is the first step to ensure the activity and quality of bovine frozen semen. How to choose? Based on the amount of frozen semen and the purpose of use! For most livestock farms, 2-liter to 35-liter liquid nitrogen tanks are a common choice. Such a capacity can not only meet daily storage needs, but also facilitate management and maintenance. But to determine the exact model, you need to combine the usage method and the amount of frozen semen! If you often need to go out to collect semen, or are located in a remote mountainous area, you may need a more portable and moderately capacity liquid nitrogen tank. In this case, a 6-liter and 10-liter liquid nitrogen tank with a diameter of 50mm would be a good choice. It has a single handle, which is not only easy to carry, but also sufficient to meet the needs of herders to go out to collect semen. If your needs tend to be long-term static storage, then 30-liter, 35-liter 125mm caliber cattle frozen semen liquid nitrogen tanks are more suitable. The 30-liter 125-caliber liquid nitrogen tank has a large internal storage capacity and can provide a static storage time of up to 85 days, reducing the need for frequent replenishment of liquid nitrogen, and is more suitable for the long-term storage needs of family farms or large livestock farms. After determining the use needs, it depends on the amount of bull semen! For semen collection outside, the amount is basically within 792 0.5ml straws and within 1788 0.25ml straws. 6-liter and 10-liter 50mm liquid nitrogen tanks are OK. For long-term storage at home, 30-liter 125 is optional if the amount of 0.5ml straws is within 9048 and 0.25ml straws is within 20706. If it is greater than this data, use 35-liter 125. If it is far less than this amount, there are 15-liter and 20-liter bull frozen semen liquid nitrogen tanks available! In addition, when choosing a liquid nitrogen tank, you should also consider the material and design of the tank, as well as after-sales service and technical support. As a factory with more than 20 years of experience in manufacturing liquid nitrogen tanks, KGSQ will provide you with comprehensive solutions, including the use, maintenance and troubleshooting of liquid nitrogen tanks, to ensure that your investment is worthwhile.
Magnetic integrated transformer refers to a miniature transformer manufactured using integrated circuit technology, which integrates coils and iron cores. It has unique characteristics such as small size and lightweight. Compared with traditional iron core transformers, magnetic integrated transformers can not only reduce current loss and magnetic loss, but also have the advantages of more precise voltage regulation, lower noise and higher energy efficiency. Therefore, magnetic integrated transformers have become one of the technologies worth promoting in industries such as power networks and new energy. With the continuous development of new energy technology, magnetic integrated transformers have also been widely used in the field of new energy. For example, in wind power generation systems, the use of magnetic integrated transformers can not only improve the stability of wind turbine speed regulation, but also eliminate harmonic interference. In addition, the high efficiency and miniaturization characteristics of magnetic integrated transformers have also been widely used in power conversion and battery management systems in electric vehicle charging stations. Compared with traditional transformer technology, magnetic integrated transformers have the following significant advantages in the field of new energy: 1. Small size and light weight: Magnetic integrated transformers can achieve a significant reduction in volume and weight while ensuring the same power transmission capacity, which is conducive to wide application in new energy applications with limited space. 2. High efficiency and low loss: Magnetic integrated transformers have the advantages of higher energy efficiency and smaller current loss and magnetic loss, which can greatly improve the operating efficiency of new energy systems. 3. Precise voltage regulation: Magnetic integrated transformers have more precise voltage regulation characteristics, which is beneficial to voltage stability control in new energy situations. At present, the application of magnetic integrated transformers in the field of new energy is still in its infancy, but its unique advantages and broad application prospects will make it more popular and in-depth used in the future. Magnetic integrated transformers will continue to play an important role in reducing power transmission energy consumption, improving system efficiency, and improving power quality in the future, and are expected to play an increasingly important role in the transformation of new energy.
Wrought Iron Fence Supplies A weld wrought iron fence is a type of fencing made from iron that has been heated, hammered, and bent into decorative and functional shapes. It is known for its elegant and ornamental appearance, making it a popular choice for both residential and commercial properties. key features CUSTOM DESIGN All of our residential cast iron fences are custom made to your specifications. STRONG Iron is able to withstand great forces, so it is not easily damaged. DURABLE FINISH The powder coating is baked at 500�º to help ensure a long-lasting, durable finish. Applications Residential Properties: Weld wrought iron fences are a popular choice for residential properties, enhancing the curb appeal of homes while providing security and defining property boundaries. Gardens and Landscaping: They are often used to enclose gardens and landscaped areas, adding an elegant touch to outdoor spaces while protecting plants and flowers from damage. Pool Fencing: Weld wrought iron fences are commonly used as pool safety barriers, helping to prevent unauthorized access to swimming pools while complying with safety regulations. Commercial Buildings: Some commercial properties, such as upscale restaurants, hotels, and boutique shops, use Weld wrought iron fences to create a visually appealing and secure perimeter. Public Parks and Plazas: In urban settings, weld wrought iron fences are used to enclose public parks, plazas, and historic sites, providing an elegant and functional boundary. Historical Preservation: Preservation projects for historical districts and landmarks often incorporate wrought iron fencing to maintain the area's historical character. Schools and Educational Institutions: Some schools and campuses use wrought iron fences around their grounds to enhance security and aesthetics. Churches and Places of Worship: Weld wrought iron fences are often found around churches and places of worship, serving both ornamental and functional purposes. Security Applications: While known for their aesthetics, wrought iron fences can also be used for security purposes in commercial and residential settings when combined with other security measures. Municipal Buildings: Government buildings and municipal properties may use wrought iron fencing to define property boundaries and provide security. Custom Projects: Weld wrought iron fences are highly customizable, and they are often used in unique or custom projects where specific design elements are desired. Balcony Railings: In addition to fencing, wrought iron is used for balcony railings in both residential and commercial buildings, adding safety and style.
Portable liquid nitrogen tanks, with their lightweight design and easy operation, are ideal for use in laboratories, healthcare organisations and the livestock industry. Available in a wide range of sizes from 1 litre to 10 litres, the KGSQ liquid nitrogen tanks provide the perfect solution for both small laboratory sample and liquid nitrogen storage and large scale livestock frozen sperm transport. Product Features: Diversified capacity options: 1 litre, 2 litres, 3 litres, 6 litres, 10 litres, with various specifications, there is always one for you. A variety of calibre design: 1 litre and 2 litre calibre is 35mm, 3 litre calibre is 50mm, 6 litre and 10 litre have 50-210mm calibre, adapting to the needs of various occasions and ensuring the safe storage of samples of different sizes. Complete accessories: the portable liquid nitrogen tank comes standard with a locking lid, PU protective sleeve, polyurethane foam neck plug, and 3 round buckets. Although the model is small, the storage capacity is not small: among them, the commonly used 3-10 litre liquid nitrogen tank can be placed in 6 round buckets, and the size of the buckets is about 38mm*120mm. When frozen fine tube is 0.25ml, each bucket can store about 298 pcs, the whole can be loaded with about 1788 pcs; when frozen fine tube is 0.5ml, each bucket can store about 132 pcs, the whole can be loaded with about 792 pcs. 2 litres, the size of the bucket is a little smaller, the amount of frozen fine tube is 204, 90 pcs or so. In addition, there are. High-strength aluminium alloy material: lightweight and durable, easy to carry, adapt to a variety of working environments. High vacuum multi-layer adiabatic: effectively reduce the daily evaporation of liquid nitrogen, prolong the preservation time of the sample. 5-year vacuum quality assurance: our commitment to product quality, so that you can use without worry. Technical parameters highlights: Model YDS-2-30: static liquid nitrogen preservation period up to 30 days. (3 litre 50 is the same) Model YDS-6-50: Static liquid nitrogen preservation period up to 63 days. Model YDS-10-50: Static liquid nitrogen shelf life up to 98 days.
Delivering On excellence of our halal chicken selection, crafted with care to deliver an unparalleled culinary experience. Dive into the world of premium quality poultry, where every cut is a testament to our commitment to excellence. Whole Chicken: From 800 to 2200 grams, our whole chickens are packed with flavor and freshness. Packaged in 10 Kg cartons, we ensure ample supply with a payload of 27 MT per 40' container, making bulk orders a breeze. Frozen Chicken Paw: Indulge in the delicate texture of our chicken paws, weighing between 40-50 grams each. Packaged in 15 Kg cartons, our commitment to quality shines through in every shipment. Frozen Chicken Feet: Discover the tenderness of our chicken feet, each weighing between 35-55 grams and carefully packed in 20 Kg cartons. With a payload of 27 MT per 40' container, freshness is always guaranteed. Frozen Chicken Wing: Delight in the succulence of our chicken wings, conveniently packed in 20 Kg cartons. With each wing weighing between 80-130 grams, our commitment to quality ensures a flavorful experience every time. Frozen Chicken Wing Tips: Experience the tender goodness of our chicken wing tips, packed in 20 Kg cartons and weighing between 30-50 grams each. Perfect for a variety of dishes, these tips promise premium taste and quality. Frozen Chicken Mid Wing: With an average weight similar to our chicken wings, our mid wings come in 15 Kg cartons. Each container boasts a payload of 27 MT, ensuring a steady supply of premium poultry. Frozen Boneless Chicken Breast: Our boneless chicken breasts are a culinary delight, packed in 15 Kg cartons to preserve their freshness and flavor. Versatile and delicious, they're perfect for a range of recipes. In addition to these cuts, we offer a diverse selection including chicken thighs, boneless chicken legs, chicken gizzards, and more, catering to every culinary preference. Quality Assurance: Each piece undergoes meticulous inspection to meet our high standards â?? clean, no yellow skin, no feathers, no bad smell, no blood, no black pad, no bruise, no chemical burns, broken bones less than 1%, moisture less than 1%, and no black spots. Frozen Freshness: To preserve their natural flavor and texture, our products are blast frozen at -40°C and stocked at -18°C, ensuring optimal freshness with every bite. Elevate your culinary creations with our premium halal chicken selection. Contact us today for competitive bulk prices and let us bring the taste of excellence to your table. Shipments available to over 200 countries, where our factories are approved. ChatGPT can make mistakes. Check important info.
IPS-14S Syringe Pump The IPS-14S Syringe Pump is an advanced dual-channel fluid handling device designed to meet the demanding requirements of various industries. With its versatile features and precise control, the IPS-14S offers reliable performance for a wide range of fluid delivery applications. Key Features: Independent Syringe Channels: The IPS-14S features two independent syringe channels, allowing simultaneous operation of different fluids or separate control over each channel. This versatility enables efficient handling of complex fluid delivery tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14S supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This broad compatibility provides flexibility to users for various volume requirements. Precise Flow Control: With a flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14S ensures accurate and consistent fluid delivery. Its stepper motor and microcontroller with Microstep Drive technology offer precise control over flow rates with a resolution of 357 nm/�¼step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14S provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-14S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters for optimal performance. This adaptability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Enables users to program up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Allows users to save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.