FIBPRO 3X 50/50 steel fibres are designed specifically for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X 50/50 is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X 50/50 steel fibres are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements.
MARKCHEM MICRO SILCIA is composed of silicon dioxide (SiO2), collected from silicon metal and ferrosilicon. Micro Silica will react with the Calcium Hydroxide from the cement, which will form more of the Calcium Silicate hydrate, increasing the strength of the concrete. Using Micro Silica will also increase the durability of the concrete.
FIBPRO 3X steel fibres are designed specially for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X steel fibers are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements
Micro Steel Fibre Brass Coated High Carbon-Steel fibre used in High Performance densified concrete system. They are available in different diameter & length sizes. Applications : UHPC Concrete Railway Sleepers Manhole Covers Random fibre mix produces better matrix building
When fully annealed, melt extract stainless steel fibers are more pliable and ductile. They not only allow for more user-friendly than the stiff cut fibers, but also have better flow features. It is especially characterized by thermal shock resistance, steep thermal gradients resistance and mechanical shock resistance, minimizing damage and delaying failure caused by cracking. Thanks to their optimum aspect radio, rapid fiber separation during the mixing phase are better guaranteed. Gives its outstanding performance in thermal shock resistance, melt extract fibers are ideal for refractory concrete used in steel works and factories.
1. Steel Fiber 2. Micro Silica 3. Silica Fume 4. Concrete Admixture 5. Waterproofing 6. Floor Hardener 7. Micro Concrete 8. Accelerator 9. Resin Capsule 10. Cement Capsule 11. Tile Adhesive 12. Tile Grout 13. Tile Epoxy Grout 14. Brass Coated Steel Fiber .
Product: Egyptian Fresh Garlic H.S.CODE: 07032000 Varieties: Fresh & Dry ( White Garlic, Red Garlic ) Fresh Variety Length : 2 , 5 , 8 , 10 , 12 , 15 , 20 CM Package Weight : 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 ,10 , 15 , 20 KG / package Packing : Loose, Bunches, Bins or upon clientâ??s request Package : Open Top & Telescopic Carton, Net Bag Mesh Bag, Plastic box & Bamboo Basket Availability: Jan till April Size : 40 , 45 , 50 , 55 , 60 , 65 , 70 , 75 , 80 MM Shipping: Air & Sea
Name Private Label Matte Lipstick Item No L1#8 LOGO No logo , Customized logo, OEM / ODM available Color Available 12 Colors Matte Lipstick Size 7.5X2X2CM MOQ 50pcs Package Paper Box+ Master Carton Payment way Trade Assurance,TMatte Liquid Lipstick/T, MoneyGram, West Union, Paypal Leading Time Sample about 2-7 working days, Mass Production about 7-15 working day Shelf life About 1-3 years Keywords Private Label Matte Lipstick Product category Eyeshadow, eyeliner, blush, concealer, foundation, lipstick, lip gloss, eyebrow pencial, highlighter, mascara, sponge, brush and so on. Feature : 1.It is the effect of matte velvet, you can touch and drink water,it will not stick to the cup,and will still long lasting. 2.If you want a more lasting effect, it is recommended not to use lip balm or eat greasy food. 3.It will look a little darker if you use lip brush than your hands. so Lip brush is strongly recommended. 4.Suitable for all seasons makeup, especially in office, dating, shopping, summer party with friends. 6.Mini size, easy to carry, you can change the color of lip at any time, this is very suitable as a gift to friends, that is indispensable for professional makeup artists.
Brand Name:Cellrato Model Number:2906-112 Type: UV/LED gel polish Materials: Resin Soak off: soak off easily Color Chart: 300 colors Products G.W: 0.040kg Capacity: 7.5ml Warranty: 24 months OEM/ODM: provide OEM & ODM service Tools: UV Lamp, LED Lamp, UV/LED CCFL Lamp Application: Nail Art Beauty, Nail Salon, Nail SPA or Training Package Original Package: 7.5ml glass bottle, CTN Capacity: 64pcs/Carton CTN Size (L*W*H): 35*24*10cm CTN G.W: 2.6kg MOQ & Delivery Lead Time: Within 3-7 days MOQ of Sample Order: 6pcs (Minimum 1 pc/color) MOQ of Formal Order: 240pcs (Minimum 6 pcs/color)
We Sofar International are manufacturing the wide range of apron, oven mitten, tabard & home textile made ups since 1998. Bellow items are available in customized Size, Color, Designs, Logo & Materials. 1) Butcher Apron 2) Bib Apron, Waist Apron & Lap Apron 3) Long & Short Aprons 4) Tools Apron 5) Tabard, Oven Glove & Oven Mittens 6) Dish wash Apron 7) Industrial Apron 8) Barbecue Apron 9) Chefs Apron, Chet Coat, Pant & Chefs Hat 10) Gardening Aprons 11) Promotional Aprons 12) Kids Apron Waiting your kind response. Thanks & Regards Asif Nazir (G.M) Sofar International Industry Manufacturers of Woven Garments, Bags, Leather Products and Promotional Items.
Bubble wrap for packing fragile products . size : width 40 inches length 10 yards. 24/7 delivery service available in Karachi .
Product name Rain Suit Describtion Outshell: 100%polyester, Spandex W/P:3000-10000MM, MVP: 3000-10000MM Function seamless,windproof,durable,waterproof,breathable Size XS-4XL Color Customized 2. Payment Terms & Advantages MOQ 500pcs Sample time 7-15 days Delivery time 75-90 days Payment TT, 30% deposit, 70% after copy of B/L./ LC / Paypal / Western Union Advantages 1)2 factories with 500 staffs and quality control system turn out high-quality apparel. 2)Lower production and labor cost to offer competitive prices with same quality level. 3) Small orders are accepted. 4) More than 20 utility model patents design and functions. 5) R&D team turns out new designs each season. 6) Offering investigation of customers satisfaction to ensure after-sales service. 7) On-time delivery for both samples and bulk orders. 8) Multiple factories providing different quality and prices levels.
Vermicelli Finger Millet Vermicelli Red Rice Vermicelli Multi Millet Vermicelli Wheat Vermicelli 1. all Ingredients Are 100% Natural And Vegetarian. 2. we Use Only Premium Quality Raw Materials For Making Vermicelli. 3. main Ingredients Are Whole Wheat Flour, Millet Flour, Salt And Water. 4. no Maida Added. 5. no Added Colour, Flavour, And Additives. 6. home-made And Sun Dried (solar) Method. 7. we Process And Pack In A Well Hygienic Environment. 8. shelf Life: 6 Months. 9. we Supply In Plain Pp Cover With Or Without Our Label In A Carton Box. 10. each Packet Has 180 Gram Vermicelli. 11. it Will Feed Two Servings. 12. each Carton Box Contains 50 Packets. 13. carton Box Size In Inches : Length : 22.50 Breadth : 14 Height : 10.5 14. each Carton Box Net Weight: 10 Kilogram, Gross Weight:11 Kilogram (approx.) 15. supply Ability: 1 Ton Per Week. 16. hs Code : 1902 17. Made In India. 18. we Have Fssai Licence And Apeda Membership. 19. please Sent Ro Mail More Details.
1. Gasoline mileage improvement 2. Power improvement 3. Noise and vibrationreduction 4. Soot and smoke reduction 5. Engine oil consumption prevention 6. More time between oil change 7. Longer engine life
2] Origin India 3] Moisture 13 % Max 4] Protein 7 to 10 % Max 5] Foreign Material 2 % Max 6] Damaged Kernels 3.5 % Max 7] Test Weight 74 kg/hl 8] Dry Gluten 9 % Min 9] Wet Gluten 24 % Min 10] Falling Numbers/Sec 150 to 250 Min 11] Other Food Grains 1 % Max
SPECIFICATION Product Name ACID RED 33 C.I. NO. 17200 Synonyms D&C Red 33 C.I.NAME Food Red 12 CAS NO. 3567-66-6 SR NO LIMITS 1 Pure Dye content, percent by mass MIN. 82 2 Sum of Volatile matter at 135�°C, Sodium Chloride and 18 Sulphate(as sodium salt),percent by mass,MAX. 3 Water insoluble matter,percent by mass MAX. 0.3 4 4-Amino-5-Hydroxy-2-7,Naphthalene Disulphonic 0.3 Acid Disodium Salt,percent by mass,MAX. 5 4,5-Dihydroxy-3-(phenylazo)2-7 Naphthalene 3 Disulphonic Acid Disodium Salt, Percent by mass Max. 6 Arsenic,mg/kg MAX. 3 7 Lead, mg/kg MAX. 20 8 Mercury, mg/kg MAX. 1
Radio-Frequency Plasma System AS-V100 Merits: Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Application fields: Suitable for PCBs,FPC IC substrates, LCDs, PV batteries, semiconductors, PTFE, automotive interior parts, medical equipment, plastic and rubber products. Product Specifications: 1.Outline Dimensions (footprint):1200*800*1750H mm 2.Vacuum chamber size:450*450*610mm 3.Power frequency:13.56MHz 4.Power supply:1Kw 5.Electrode plate specifications: Non-standard customization 6.Software control: PLC touch screen 7.Gas purity requirement: Industrial grade gas or better 8.Loadable gas:O2 N2 Ar Features & Performance: 1.User-friendly automatic control interface with a touch screen for easy operation. 2.Unique cavity design ensures excellent cleaning uniformity and high cleaning quality. 3.Utilizes a two-layer structure with 4-6 material boxes per layer, combining chemical reactivity and physical impact for a short cleaning cycle and high efficiency. 4.Plasma cleaning offers high repeatability, strong controllability, high utilization rate, and operates with no pollution and low operating costs. 5.Features a simple structure, compact footprint, high efficiency, easy operation and maintenance, fast speed, and stable performance. 6.Enhances the surface wetting ability of the lead frame or substrate before D/A, ensuring precision and firmness in subsequent processes.
Applications 1.Skin Tightening 2.Wrinkle Removal 3.Eyes' area treatments 4.lncrease skin elasticity 5.Fat and cellulite reduction 6.Face wrinkle removal & lifting 7.Warm vacuum cellulite massage 8.Body slimming, contouring & shaping 9.Promote cell metabolism, improveblood circulation Working Principle 940nm Infrared laser reduces skin impedance by heating skin and RF energy penetrates deeply into connective tissue; The synergistic combination of infrared laser and conducted Bipolar RF energies increase the oxygen intracellular diffusion by heating the skin Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time, Cavitation and Rollers mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect; The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, greatly improve effect and safety, even for the upper eyelid area treatment
Horizontal Plasma System AH-V1000 Merits: Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Application fields: Suitable for PCBs,FPC IC substrates, LCDs, PV batteries, semiconductors, PTFE, automotive interior parts, medical equipment, plastic and rubber products. Product Specifications: 1.Outline Dimensions (footprint):1850*1800*2100H mm 2.Vacuum chamber size:1450*670*950mm 3.Maximum Treatment Area:1290*570mm 4.Maximum number of processing layers:13 layer 5.Input voltage:3-Phase 380 VAC~440V, 50 Hz/60 Hz 6.Output frequency:40KHz 7.Output power:10Kw 8.Discharge vacuum:20Pa-80Pa 9.Loadable Gases: O2, N2, H2, CF4 10.Treatment Time for Each Batch: 15~30 minutes Features & Performance: 1.Suitable for large quantities of PCB/FPC and other products across a wide range of applications. 2.Short processing time and high efficiency to improve production capacity. 3.Extremely simple and convenient operation, with low usage costs and easy maintenance. 4.Dry process with no residue left on the product surface after treatment, ensuring no discharge of pollutants and providing a safe and environmentally friendly solution.
we can supply carbon steel,alloy steel casting,stainless steel casting(304,316),use lost wax casting can produce the parts'weight:0.05-100kg,roughness:Ra6.3-25,CT:7-9, we can supply carbon steel,alloy steel casting,stainless steel casting(304,316),non-ferrous metal casting,parts'weight:0.05-25kg,roughness:Ra6.3-25,CT:6-8,use mid-temperature wax(green wax),low-temperature wax.can produce small but high tolerance parts. we can supply aluminium die casting,gravity casting,low pressure casting,CT:7-8,weight 0.02-35kg.