MARKCHEM MICRO SILCIA is composed of silicon dioxide (SiO2), collected from silicon metal and ferrosilicon. Micro Silica will react with the Calcium Hydroxide from the cement, which will form more of the Calcium Silicate hydrate, increasing the strength of the concrete. Using Micro Silica will also increase the durability of the concrete.
FIBPRO 3X 50/50 steel fibres are designed specifically for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X 50/50 is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X 50/50 steel fibres are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements.
FIBPRO 3X steel fibres are designed specially for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X steel fibers are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements
Micro Steel Fibre Brass Coated High Carbon-Steel fibre used in High Performance densified concrete system. They are available in different diameter & length sizes. Applications : UHPC Concrete Railway Sleepers Manhole Covers Random fibre mix produces better matrix building
When fully annealed, melt extract stainless steel fibers are more pliable and ductile. They not only allow for more user-friendly than the stiff cut fibers, but also have better flow features. It is especially characterized by thermal shock resistance, steep thermal gradients resistance and mechanical shock resistance, minimizing damage and delaying failure caused by cracking. Thanks to their optimum aspect radio, rapid fiber separation during the mixing phase are better guaranteed. Gives its outstanding performance in thermal shock resistance, melt extract fibers are ideal for refractory concrete used in steel works and factories.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Applications: Use to manufacture gypsum panel or building plasters Use to make gypsum mold or statutes As grout of marble, clay and ceiling tiles As a color additive Act as additive to other products Types: 1. Super Micronized Gypsum Powder 2. Facade Rendering Gypsum Packaging: 25 kg per bag 30 kg per bag 50 kg per bag 1 ton jumbo bag 1.5 tons jumbo bag 2 tons jumbo bag
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings. According to the application: 1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc. 2. changing the direction of the pipe: bends, bends. 3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe. 4. pipe fittings with additional piping branches: three links, four links. 5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug. 6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc. According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings. Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
