This motor MCC Panel is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled. Features: Simplex & Duplex pattern Degree of Protection: IP-42 to IP-65 Painting: Powder Coating / Spray Paint / Epoxy Paint Compartmentalized design eliminates risk to maintenance personal Sufficient space for incoming and outgoing cables Provided with buzzer & hooter during emergency Separate Bus bar and cable chambers Motor Control Center shall have hinged door with lockable arrangement Motor Control Center Available with Aluminum / copper bus bar Motor Control Center is suitable for use on 415V, 3 Phase, 4 wire, 50Hz Application: These are widely used for: Protection against electrical Short Circuit, overload and earth fault of the system Control & monitoring of the entire electrical system of an industry / plant Systematic power catering to various load of an electrical system Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open â??cast mines, shopping mall etc. We offer the following options and facilities: ASTA certified bus bar systems (50 KA for 1 sec as standard). Separation: Form 4 Type 2 as standard but types 3, 6 and 7 available if required Ingress protection up to IP 65 Wall mounting or floor standing Top, bottom or special cable entry Front or rear cabling access Fixed, plug in or with drawable type Full range of instruments and metering to customers requirements Contactor, soft start and variable speed drives Local or remote control Wired to separate terminal chambers Facilities for thermal imaging Local or remote manual controls Relay or PLC automatic controls Alarm systems Alarm annunciators BMS interface Special control systems to customers requirements
Product Name: Dried Mealworms Product Description: Dried mealworms are a high-protein, low-fat insect product commonly used in animal feed, human food, and nutritional supplements. They are an ideal food source for birds, reptiles, small mammals, and are also gaining popularity among humans as a healthy, protein-rich snack. Key Features: High Protein Content: Dried mealworms contain approximately 50-60% protein, making them an excellent source of protein. Low Fat: Compared to some traditional protein sources, dried mealworms have relatively low fat content. Rich in Micronutrients: They are packed with essential vitamins, minerals, and amino acids, including calcium, iron, zinc, selenium, and B vitamins. Sustainable: The production of dried mealworms has a minimal environmental footprint, requiring less water and land resources. Versatile: They can be used in pet food, wild bird food, fish food, baked goods, protein bars, and protein powders. Uses: Pet Food: Dried mealworms are used in the production of high-protein pet foods such as dog and cat kibble. Wild Bird Food: Bird enthusiasts often use dried mealworms as a bird food source, providing high-quality protein and energy. Fishing: Dried mealworms can serve as effective bait for attracting various fish species. Baking: Dried mealworm powder can be used to create high-protein baked goods like cookies and protein bars. Protein Supplements: Humans can also incorporate dried mealworm powder into protein shakes, smoothies, and nutritional supplements to boost protein intake. Packaging: Typically available in various packaging options, including plastic bags, bottles, and bulk bags, to cater to different customer needs. Storage: Dried mealworms should be stored in a cool, dry place away from direct sunlight. Sealed packaging can extend the shelf life. Shelf Life: Under appropriate storage conditions, dried mealworms typically have a shelf life of several months to over a year.
Introducing our Double Insulation Cup the ultimate solution for keeping your beverages at the perfect temperature, anytime, anywhere! Crafted with innovative double-wall insulation, it's designed to keep your drinks hot for up to 12 hours or cold for up to 24 hours. Here's why it's a game-changer for your hydration routine: Superior Insulation: Features double-wall insulation to keep your drinks hot or cold for extended periods Generous Capacity: With a 600ml capacity, it's perfect for all-day hydration needs Durable Construction: Made from high-quality materials for long-lasting durability Leak-Proof Design: Equipped with a secure lid to prevent spills and leaks, ideal for on-the-go use Sleek and Stylish: Modern design that's sure to impress, whether at home, work, or on the move Environmentally Friendly: Say goodbye to single-use cups and bottles, and reduce your carbon footprint with a reusable solution Easy to Clean: Wide mouth opening for effortless cleaning and refilling Versatile: Suitable for use with both hot and cold beverages, perfect for any occasion Upgrade your hydration experience with our Double Insulation Cup and enjoy your favorite drinks at the perfect temperature, wherever life takes you!
Introducing our Double Insulation Tumbler the perfect blend of style and functionality for your hydration needs! Designed to keep your drinks hot or cold for hours, it's the ultimate companion for your busy lifestyle. Here's why it's a must-have addition to your daily routine: Double Insulation: Features a double-wall design to keep your beverages hot for up to 12 hours or cold for up to 24 hours Generous Capacity: With a 500ml capacity, it's perfect for staying hydrated throughout the day Durable Construction: Made from high-quality materials for long-lasting durability Leak-Proof Lid: Securely seals to prevent spills and leaks, making it perfect for on-the-go use Sleek Design: Stylish and modern, it's sure to turn heads wherever you go Eco-Friendly: Say goodbye to single-use cups and bottles, and embrace a more sustainable lifestyle Easy to Clean: The wide mouth opening makes it easy to clean and refill Versatile: Ideal for use at home, in the office, or while traveling Upgrade your hydration game with our Double Insulation Tumbler and enjoy your favorite beverages at the perfect temperature, anytime, anywhere!"
Product Description FEATURES Deck Construction Bamboo Construction Trucks 6.0" Slant Trucks Wheels Globe 62mm 83a Wheels Bearings ABEC 7 Bearings Hardware Phillips Details Built-in Bottle Opener DECK CONSTRUCTION Bamboo Construction - Bamboo offers a solid alternative to standard maple decks, the detail of the grain offering a unique look. TRUCKS 6.0" Slant Trucks - High-grade alloy construction and hardware, engineered to stand up to the most abusive skateboarding. All Slant trucks are guaranteed for life. WHEELS Globe 62mm 83a Wheels - Designed for a smooth, carefree cruising experience. With a 30mm riding surface, these wheels are soft with plenty of grip, but hard enough that sliding through turns and drifting is a breeze. BEARINGS ABEC 7 Bearings - ABEC 7 bearings are highly precise and turn faster for longer. A precise bearing means that it has a higher tolerance to heat caused by friction. SPECS SIZE 32IN CENTER WIDTH (IN): 9.25 LENGTH (IN): 32.0 WHEELBASE (IN): 17.5 NOSE (IN): 4.0 TAIL (IN): 6.25
Application The CLRT-01 Carbon Dioxide Volume Tester is a crucial tool in the beverage industry, focusing on gauging carbonation levels, which significantly impact the bubbly and sensory qualities of drinks, thus influencing product excellence and customer contentment. Specially crafted for CO2 volume assessment, the CLRT-01 employs an automated process to uncover the connection between pressure and temperature, a pivotal factor in thorough beverage quality analysis. By seamlessly merging these elements, it offers a profound understanding of carbonation dynamics, granting manufacturers the ability to maintain consistency, adapt formulations, and provide effervescence that resonates with consumer preferences and brand achievement. Automatic Testing and Shaking The tester automates the traditional manual process: Piercing the bottle cap â?? Opening the vent valve to release pressure â?? Closing the vent valve â?? Vigorously vibrating for 40 seconds â?? Recording the stabilized MPa pressure (while measuring liquid temperature) â?? Obtaining the carbon dioxide gas capacity test results. Technical Features 1.This unit is under precise PLC control (at an industrial-grade stability level) and operated through an HMI touch screen interface. 2.Agitating the sample bottle is achieved using a servo motor and gearbox transmission mechanism. 3.The design incorporates anti-leak features and includes accurate temperature and pressure measurement. 4.The process involves automated piercing and shaking. 5.Displacement and speed during piercing are controlled for accuracy. 6.The shaking parameters, including frequency and duration, can be customized. 7.Test results are guaranteed accurate due to the implementation of a highprecision pressuresensor. 8.Real-time temperature display is enabled by a precision temperature sensor. 9.Post-test, the carbonation volume is automatically and presented. 10.Designed to prevent leaks, this versatile tester is suitable for both bottles and cans. 11.(Optional) A microprinter can be incorporated for additional functionality. 12.(Optional) The inclusion of an RS 232 port and professional software provides further versatility. Main Parameters Test Range 0~1MPa Resolution 0.01KPa Shaking Speed Adjustable Piercing Speed 5mm/s (other available) Sample Height â?¤ 350mm (other available) Temp. range 0 ~ 30 Shaking time 40s (other available) Resolution 0.1
All items in stationery like pen, pencils, colour pencils, crayon wax, magnetic and non magnetic duster, dustless chalk, white board, sketch book, drawing book, notebook, memo pad, notepad, calculator, white board marker, permanent marker, secssiors, push pin, t pin, geometry box, chart, flash card, puzzles, sketch colors, map, arrows, 4 size paper, magnetic pen holder, a4 size folder, document file, wooden lead pencils, erasers, sharpners, plain art sketch book, story books, my first book, office stationery, office equipment, school toys, art materials, key chain, school bag, lunch box, water bottle, business card holder, office furniture desk, tape dispensor, clay toys for childern, clay, scale ruler, divider, toys, teddy bears, teddy toys, glue, white glue, glue stick, tape, invisivble tape, bopp tape, foam tape, charts,.
Stainless Steel Check Valve Stainless Steel Check Valve for Sale BSTV provides the most comprehensive range of stainless steel check valves in the industrial valve market. The design of these stainless steel check valves eradicates sticking issues and renders them suitable for use with water, gasoline, or oil. Our stainless steel check valves provide superior flow control. These valves provide seamless, one-way flow, minimizing the possibility of backflow in the system. Stainless steel swing check valves stand out for their robust construction and reliability, delivering top performance under all conditions. For high-pressure applications, stainless steel spring check valves are ideal and provide excellent sealing, ensuring optimal functionality. Stainless steel threaded swing check valves offer easy installation and exceptional durability. Advantages Stainless steel check valves are ideal for use with liquid and gaseous media at high pressures up to 250 bar and temperature ranges up to +200 �°C. There are many different connections to choose from, with significant advantages: Excellent sealing Low wear and corrosion resistance Minimum opening pressure Low noise on and off
Metal scrap, used rail, new rail, aluminium, copper cathode, copper scrap, copper wire, copper ore, iron ore, sesame seeds, sisal, wheat, cooking oil, sunflower oil, sunflower seeds, soybean seeds, fly ash, coal, cement, clinker, timber, hardwood, aloe vera, myrrh resin (commiphora myrrha) extracts, frankincense, gums, charcoal briquettes, goat meat, beef, alfalfa hay bales, lucerne hay, camel meat, avocados, cut flowers, soybeans, cumin, sugar, white & yellow maize, tea, coffee, black pepper, cardamon, chickpeas, cotton seeds, flax seeds, white pepper, vanilla, beans, sisal fiber, cinnamon, cloves, essential oils, cashew nuts, red kidney beans, macadamia, cobalt, coltan, lithium ore, light cycle oil, diesel en590, euro 6, gas oil, virgin fuel oil d6, aviation kerosene, jet fuel a1, liquefied petroleum gas, liquefied natural gas, crude oil, petroleum coke, granular urea, automotive gas oil (ago), cowpeas, beans, aircraft charters, livestock charters, shipping slots, warehouse space..
Plastic Granulating Machine Plastic granulating machine is industrial equipment used to process plastic waste materials into small, uniform plastic granules or pellets. These granules can then be used as raw material in various plastic manufacturing processes, such as injection molding, extrusion, and more. Plastic granulating machine play a crucial role in recycling plastic waste and reducing environmental impact by transforming discarded plastic items into valuable resources. Ensure the smooth size reduction of PP, PE, PET, PVC and other plastic and rubber products in various sizes. The plastic granulating machine has high speed and sharp blades, and is usually used for secondary crushing It has a solid welded steel structure and stable operation, but during the crushing process, metal and similar hard foreign objects are not allowed to enter the crushing cavity. The 4 rotors are designed for a variety of applications and produce a homogeneous regrind whose size is determined by the sieve openings. Plastic granulating machine offer two main types of rotors: one for soft plastics and one for hard plastics. The resulting regrind can be conveyed and collected pneumatically, forming an in-house simple plastic recycling system that is dust-free and reduces labor costs. As one of our best-selling types of plastic recycling machines, these plastic granulating machines are packaged in many of our complete recycling solutions, including our popular PET bottle washing lines, plastic film recycling lines, and more.
Product Descriptions: This full-automatic quantitative vacuum sausage stuffer is filled by vane pump, driven by servo motor, operated by human-machine interface, and equipped with twisting and kinking structure, and its automatic motions are controlled by micro-computer. This machine is able to fill casing products like sausage, ham sausage, ham and etc. and to quantitative twist and kink those products which are wrapped by natural casings, collagen casings and fibrous casings. As well, this machine can fill boxed, bottled or canned product. The automatic blade compensation device in the machine can achieve the quantitative accuracy to �±3mm, and deliver material delicately. And the speed of filling, twisting and kinking, the number of twisting, weight of every segment can be adjusted. The filling process of this machine is under vacuum environment. The hopper could be flipped, which is easier to wash and clean. This machine is manufactured of stainless steel, and essential parts are treated specially, thus they are hard-wearing. And the controlling parts are imported; appearance is treated by advanced surface treatment technology. Those advantages make the machine reasonable structured, convenient to operate, easy to maintain. And at the end, with not mentioned security devices, this is an ideal equipment for meat processing industry. Main Features: 1. Simple structure in linear type ,easy in installation and maintenance. 2. Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 3. High pressure double crank to control the die opening and closing. 4. Running in a high automatization and intellectualization,no pollution 5. Apply a linker to connect with the air conveyor ,which can directly online with other machine Technical Specification: Model BG-6000 Power 8kw, 380v/50hz/3 phases Filling Capacity 6000kg/h (100r/min) Quantitative accuracy �±2g Hopper volume 200L Kink speed 0-500times/min Quantitative Range 6~9999g Center height 980~1030mm(adjustable) Maximum vacuum degree -0.1Mpa Machine Weight 550kg Dimensions 1980x1125x1780mm
It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 5 pieces of vacuum tubes as one unit. Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C.
Plastic Granulating Machines Plastic granulating machines are industrial equipment used to process plastic waste materials into small, uniform plastic granules or pellets. These granules can then be used as raw material in various plastic manufacturing processes, such as injection molding, extrusion, and more. Plastic granulating machines play a crucial role in recycling plastic waste and reducing environmental impact by transforming discarded plastic items into valuable resources. Ensure the smooth size reduction of PP, PE, PET, PVC and other plastic and rubber products in various sizes. The plastic granulating machines have high speed and sharp blades, and is usually used for secondary crushing It has a solid welded steel structure and stable operation, but during the crushing process, metal and similar hard foreign objects are not allowed to enter the crushing cavity. The 4 rotors are designed for a variety of applications and produce a homogeneous regrind whose size is determined by the sieve openings. Plastic granulating machines offer two main types of rotors: one for soft plastics and one for hard plastics. The resulting regrind can be conveyed and collected pneumatically, forming an in-house simple plastic recycling system that is dust-free and reduces labor costs. As one of our best-selling types of plastic recycling machines, these granulators are packaged in many of our complete recycling solutions, including our popular PET bottle washing lines, plastic film recycling lines, and more. Plastic Granulating Machines Advantage A plastics granulating machines are a piece of equipment used in the recycling industry to convert plastic waste materials into small, uniform-sized plastic granules. Some of the advantages of using a plastic granulator machine include: Efficient recycling: Plastic granulator machines can efficiently process a large volume of plastic waste materials, reducing the amount of plastic waste that goes to landfills and helping to conserve natural resources. Consistent output: The granules produced by the machine are of a consistent size and shape, making them ideal for use in a variety of plastic products. Versatility: Plastic granulator machines can process a wide range of plastic materials, including PVC, PE, PET, and more.
BRAVE 26 TON VERTICAL/HORIZONTAL GAS LOG SPLITTER Price:$1,095.08 SKU:VH1326VN Brand:Brave Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features 26 Tons Of Splitting Force Designed for heavy usage - split up to 250 cords per season Split Wood In Horizontal Or Vertical Positions Split smaller logs at comfortable waist height Switch to vertical, save your back & roll large logs into place Heavy Duty 10HP/305cc Briggs & Stratton Vanguard 4-Cycle Engine OHV design for increased efficiency and optimal power transfer 2-Stage, 16 GPM Hydraulic Pump Productive 14 second cycle time with auto-return 5.4 gallon hydraulic system; hydraulic fluid not included 6-Inch High Carbon Steel Splitting Wedge 25" log opening on 3" x 6" reinforced steel beam 26.5-inch working height from ground to top of beam Includes log dislodger High Speed 4.80 x 8 Highway Rated Tires 35 mph maximum towing speed Includes safety chains and 2" hitch coupler Specifications Engine Engine Brand Briggs & Stratton Starting System Recoil Start HP 10 HP CC 305 CCs Fuel Tank Size 0.875 Gallons Low Oil Shutdown Yes Hydraulics Auto Return Yes Hydraulic Filter Yes Hydraulic Oil Included No Hydraulic Reservoir Size 5.4 Cylinder Diameter 4.5 Inches Cylinder Length 24 Inches Cycle Time 14 Seconds Tonnage 26 Tons Wedge Wedge Material Steel Wedge Size 6 Inches Wedge Style 2-way Replaceable Wedge Yes Sharpenable Wedge Yes Log Capacity Max Log Length 25 Inches Towing Towable Yes D.O.T. Lights No Fenders Included Hitch Type 2 Inch Ball Hitch Max Towing Speed 35 MPH Accessories Jack Stands Included Log Cradles Sold Separately Overview Assembly Required Yes Weight 500 Pounds Product Length 81.5 Inches Product Width 40.0 Inches Product Height 36.0 Inches Consumer Warranty 2 Years Commercial Warranty 1 Year
PLX7000B High Frequency Mobile C-arm System Make your diagnose More accurate location: Products> Surgical C-arm System Introduce 丨 Pictrue 丨 Video Introduce Features & Benefits Make your diagnose More accurate High-frequency generator deliver the power you need for all the typical applications in spine surgery, orthopedics, traumatology, urology and pain management. Unique design of large thermal capacity with advanced heat dissipation technology, allows for clear images, even for long or repeated procedures. High-resolution CCD camera with image matrix, over shades of gray, realizes more accurate diagnose. Reduce the X-ray radiation to the minimum Short, sharp pulses for clear images and the radiation exposure for the operators and patients can be reduced to a minimum. Motorized iris collimator with multi-leaf, supports high accuracy for selected x-ray field size. Crosshair overlay corresponding with laser light, designed for easily checkpoint location before operation, avoiding unnecessary exposure. Professional remote controller for exposure, allows operators retreating to X-ray exposure. Professional storage system for single and continuous images, reducing the repeatability of the exposure. Perfect Digital Image Chain Advanced functions of Images optimi-zation, strengthen module, real-time displaying the clear clinical images. Professional working station has more image post-processing functions such as the image W/L adjustment, region of interest balance, GAMMA correction, flip, noise reduction, smoothing, sharpening etc. Two monochrome lat-screen monitors clearly visualize the smallest anatomical details. Intelligent control system make the operation more efficient and easier than ever before Hand controller on C-arm stand: control the mechanical and collimator movement, improve your workflow even you are away from the unit. Hand controller on the work station trolley: select the mode of fluoroscopy. Synchronized dual touch-screen panels mounted on C-arm stand, with intuitive user interface and APR parameters setting, make the exposure control at your hand all the time. Double rotatable flat-screen monitors on the trolley, clearly visualize the smallest anatomical details even at an angle. The wide opening and depth of the arc make for precise alignment with minimum interference with the operating area.
PLX7000C High Frequency Mobile C-arm System Reduce the X-ray radiation to the minimum location: Products> Surgical C-arm System Introduce Pictrue Video Introduce Features & Benefits Make your diagnose More accurate High-frequency generator deliver the power you need for all the typical applications in spine surgery, orthopedics, traumatology, urology and pain management. Unique design of large thermal capacity with advanced heat dissipation technology, allows for clear images, even for long or repeated procedures. High-resolution CCD camera with large image matrix, over shades of gray, realizes more accurate diagnose. Reduce the X-ray radiation to the minimum Short, sharp pulses for clear images and the radiation exposure for the operators and patients can be reduced to a minimum. Motorized iris collimator with multi-leaf, supports high accuracy for selected x-ray field size. Crosshair overlay corresponding with laser light, designed for easily checkpoint location before operation, avoiding unnecessary exposure. Professional remote controller for exposure, allows operators retreating to X-ray exposure. Professional storage system for single and continuous images, reducing the repeatability of the exposure. Perfect Digital Image Chain Advanced functions of Images optimi-zation, strengthen module, real-time displaying the clear clinical images. Professional working station has more image post-processing functions such as the image W/L adjustment, region of interest balance, GAMMA correction, flip, noise reduction, smoothing, sharpening etc. Two monochrome flat-screen monitors clearly visualize the smallest anatomical details. Intelligent control system make the operation more efficient and easier than ever before Hand controller on C-arm stand: control the mechanical and collimator movement, improve your workflow even you are away from the unit. Hand controller on the work station trolley: select the mode of fluoroscopy. Synchronized dual touch-screen panels mounted on C-arm stand, with intuitive user interface and APR parameters setting, make the exposure control at your hand all the time. Double rotatable flat-screen monitors on the trolley, clearly visualize the smallest anatomical details even at an angle. The wide opening and depth of the arc make for precise alignment with minimum interference with the operating area. Four-dimensional movement mechanical design provide you the most comfortable operation environment Four dimensional movement motorized movement for easy and accurate positioning. With cutting-edge technology and high performance, this system becomes a reliable partner in the OR for a vast range of surgeries. Professional diagnostic and treatment platform delivers the optical performance for wider application. Pain management Orthopedics Urology surgery Spinal surgery Abdominal surgery Digestive department Gynecology
Model features: This series of models is an open aluminum alloy profile structure heat shrink baking machine, suitable for electronic wire harness and new energy wire harness heat shrink tubes, circuit boards, inductor wire diagrams, copper bars, hardware accessories and other products (heat shrink baking size range small, but the product size is relatively long), or products that can only be heat-shrunk and baked at one end. 1. The machine uses far-infrared heating tubes for heating (the new energy wiring harness uses thermal radiation heat shrinkable tubes). There are heating tubes installed on the top, bottom, left and right, which can be heated at the same time. It is also equipped with a high-speed centrifugal fan, which can Stir the heat evenly to keep the entire box at a constant temperature; the products that need to be heat-shrunk and baked can be heated at the same time, maintaining the original characteristics of the product, so that the product does not deform or discolor after heat-shrinking or baking, and the quality Stablize: 2. Use high-temperature resistant Teflon mesh belt (temperature resistant 0-350), feeding in assembly line mode, fast baking speed and high efficiency: 3. Aluminum alloy profile structure mode, the mechanical size and structure can be customized and modified at will, and the machine model has a compact structure and exquisite design, and can also be moved and connected to the production line and controlled synchronously; 4. Intelligent control system, the heating temperature and speed can be adjusted at will, which can adapt to the temperature and heat shrinking time needs of different products; 5. Independent control electric box, away from high temperatures; the double-layer design of the heating box is sandwiched with high-temperature insulation cotton (temperature resistance 1200�°C), so that the surface temperature of the box will not be overheated, which not only makes the working environment comfortable, but also reduces Energy waste.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 4 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 3 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description Product Info for Kowa TSN-883 88mm PROMINAR PFC Spotting Scope (Angled Viewing, Requires Eyepiece) The Kowa straight-viewing TSN-884 88mm PROMINAR PFC Spotting Scope is a world-class caliber optic that redefines standards of color brilliance, sharpness, and brightness consistency. Kowa reinvented themselves again with the TSN-884, fastidiously examining each technological and ergonomic detail to produce the very best all-weather straight-viewing prismatic spotting scope. Kowa TSN-884 88mm PROMINAR PFC Spotting Scope (Straight Viewing, Requires Eyepiece) Specs Design Viewing Angle Straight Performance Objective Lens Diameter 88 mm Minimum Focus Distance 16.4' / 5.0 m Features Fogproof Yes Water Resistance Waterproof General Filter Thread 95 mm Tripod Mounting Thread 1/4"-20 Female, 3/8"-16 Female Dimensions L: 13.5" / L: 34.3 cm Weight 3.4 lb / 1.5 kg Packaging Info Package Weight 5.85 lb Box Dimensions (LxWxH) 16.7 x 6.75 x 6.7" Kowa C882 Fitted Scope Case Specs General Material Nylon Type of Closure Touch fastener Exterior Dimensions Not Specified by Manufacturer Interior Dimensions 15.1 x 7.87 x 2.56 (38.35 x 20 x 6.5 cm) (LxWxD) Accommodates Kowa TSN-882 and TSN-884 straight spotting scope Carrying/Transport Options Hand strap Weight Not Specified by Manufacturer Packaging Info Package Weight 0.565 lb Box Dimensions (LxWxH) 18.65 x 6.85 x 5.75" Kowa TE-11WZ II Wide-Angle Zoom Eyepiece Specs General Magnification With TSN-99 Scopes: 30 to 70x With TSN-880/770 Scopes: 25 to 60x With TP556 Scopes: 28 to 66x Angle of View With TSN-99 Scopes: 2 to 2.3�° (Actual) With TSN-880 Scopes: 3.5 to 1.5�° (Actual) With TSN-770 Scopes: 3.1 to 1.3�° (Actual) With TP556 Scopes: 3.2 to 1.3�° (Actual) Field of View With TSN-99 Scopes: 105.4 to 60.2' @ 1000 yd / 35 to 20 m @ 1000 m With TSN-880/770 Scopes: 126 to 69' @ 1000 yd / 42 to 23 m @ 1000 m With TP556 Scopes: 114 to 63' @ 1000 yd / 38 to 21 m @ 1000 m Exit Pupil Diameter With TSN-99 Scopes: 3.3 to 1.4 mm With TSN-880 Scopes: 3.5 to 1.5 mm With TSN-770 Scopes: 3.1 to 1.3 mm With TP556 Scopes: 3.2 to 1.3 mm Eye Relief 17.0 mm Dimensions �¸: 2.2 x L: 3.4 to 4.4" / �¸: 5.5 x L: 8.7 to 11.1 cm Weight 13 oz / 370 g Packaging Info Package Weight 1.08 lb Box Dimensions (LxWxH) 6.1 x 3.9 x 3.3" Klean Kanteen TKWide 16 Oz Insulated Bottle With Cafe Cap (Juicy Pear) Specs General Material 18/8 Food Grade Stainless Steel Dishwasher Safe Yes Capacity 16 fl oz / 473 ml Dimensions 8.7 x 3.0" / 22 x 7.6 cm Opening Diameter: 2.6" / 6.6 cm Weight 13.9 oz / 395 g with Cap Packaging Info Package Weight 0.875 lb Box Dimensions (LxWxH) 8.6 x 2.95 x 2.95"