Tankless Solar Water Heater 80L

Product Description
It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features:

Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water.
this one is 4 pieces of vacuum tubes as one unit.
Tankless:
Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space.

Pressurized mode:
the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient.

Flexible installation position
Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa.

Installation method: vertical, horizontal, inclined etc. installation

Limescale prevention:
Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry.

Excellent insulation:
Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention.
Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C.

The highest energy efficiency:
due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest.

Automatic anti-freeze function:
when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature.

optional devices:
electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.

Product Description
It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features:

Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water.
this one is 3 pieces of vacuum tubes as one unit.
Tankless:
Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space.

Pressurized mode:
the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient.

Flexible installation position
Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa.

Installation method: vertical, horizontal, inclined etc. installation

Limescale prevention:
Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry.

Excellent insulation:
Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention.
Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C.

The highest energy efficiency:
due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest.

Automatic anti-freeze function:
when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature.

optional devices:
electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.

Flue type gas water heater
Features:
* Low water pressure start up function
* Double ignition pin,Water control automatic impulse ignition by Water-gas interlock valve
* Flame out failure protection , Anti-dry combustion
* Over heating and 20 minutes timer shutdown protection
* Panel in new and good design,different color coating panel
* Winter-summer switch for gas saving
* Good pulse ignitor to keep the battery funtional in one year.
* Excellent heat exchanger asorbs heat more efficiently
* Special Cold and hot water convert.

Solar water heater make from Glass lining process and 08 year warranty.

1.Brief Features:
Model:58-470-16
Capacity: 160L
Tank material: stainless steel/Nano plastic
Container loading: 20PG/40HG: 47/105set
Warranty: 5 years from the date of arrival at destination port
Cooperation model: OEM acceptable/CKD parts acceptable
 
2.Introduction
 
High Quality Stainless Steel, Non-Pressurized Solar Water Heater
 
Nowadays, non-pressurized solar water heater is very popular in many countries and area, such as India, Mexico, Vietnam, China, Chile....etc.  
 
Features and advantages:
1. High efficiency and economical system.
2. Suitable for projects and home use.
3. Designed for commercial solar water heating applications.
4. Reliable and efficient with twin-glass solar tubes.
5. Polyurethane insulation ensures a good heating performance and minimal heat loss.
6. Easy plug-in installation.
7. Can be connected in series to increase water heating capacity.

TellS Solar water heaters use the solar energy from the sun to generate heat (not electricity) which can then be used to heat water for showering, space heating, industrial processes or even solar cooling. Solar water heating systems comprise various technologies that are used worldwide increasingly, uses for solar water heater in Domestic: Bungalows and Apartment, Commercial: Hotels, Hospitals, Dairies, and Industrial: Process Industries, Preheating boiler feed water, wherever & whenever you need hot water

1.Stylish slim line design
2. Thermosiphon operation minimises maintenance
3. Electric booster models available
4.Inner tank with vitreous enamel or SUS304
5. Collector absorber with black chrome coating
6. Unpressurized system
7. Reliable, low maintenance operation
8. Flexible option of collector and tank capacity
9. Enhanced protection for maximum life
10. Easy mounting and installation.

1. Ccc, ce, iso certificated 2. Sus 304 food grade tank 3. Get hot water of 95-100 degree 4. Warranty:5years 5. Quick deliver
Characteristics
1. Instant heat exchange to provide plentiful warm water
2. Fresh and high water quality
4. Output water temperature is stable, so it is very comfortable and safe to use
5. Hot&cold water flow is separated
6. Copper coil is tested and does not break
7. Works intelligently and easy and is very reliable
8. Perfect performance
Material
Inner tank: imported stainless steel (sus304/2b), 0.5mm thickness
Outer tank: galvanized steel alloy, 0.4mm thickness
Bracket: galvanized steel alloy, 1.5mm thickness
Heat insulation layer: imported polyurethane (bayer, germany), 50mm thickness
Working temperature: 99 celsius degree
Working pressure: copper coil: above 0.6mpa (6 bars), tank: 0.005mpa (0.05 bars)
Copper coil: 12mm, 0.8mm thickness
Warranty: 1 year for electric parts/5 years for the full system /15 years for the vacuum tube
Remark:
1. Diameter of the tank: 360/460mm
2. Insulation thickness: 50mm
3. Coil connection: 1/2"
4. Electric heater connection: 1"
5.Cold water inlet: 1/2"

6. Installation angel: 45



Packaging details: Manifold in one carton, frame in one carton, vacuum tubes in several cartons

1. Inner tank: 0.4mm-0.6mm thickness sus
304-2b stainless steel
2. Tank diameter: 470mm/480mm outer tank,
360mm/370mm inner tank
3. Vacuum tube: 47-1500mm/58-1800mm
4. Outer tank: 0.31mm-0.4mm thickness
Stainless steel/color steel
5. Frame: stainless/1.5mm thickness
Galvanized steel
6. The material of insulation: 55-60mm
Thickness polyurethane
7. The reflector: stainless steel /aluminum
Plate
8. Working efficiency: >95%
9. Heat preservation time: 72-96hours
10. Hail resistance: 25mm
11. Inlet/oulet size: 1/2'', 3/4''
12. Tank capacity:
100l/110l/115l/135l/150l/165l/200l/250l/2
85l/300l
13. Air vent: 100% copper vent

Xxx