1. Color coated aluminum strip is the aluminum coil surface coating coloring with AC,PE.HDPE,PVDF.FEVE. 2. Widely used in aluminum-plasticpanels aluminum veneer, aluminu Honeycomb panels, aluminum ceilings, roofing, trim, cans, electronics.aluminum performance is very stable, not easy to be corroded, the surface after a special treatment can achieve 30 years of qualityassurance. 3. The weight of the unit volume is the lightest metal materials, color coatedaluminum, is the most popular a new materials for construction building,decoration,packaging ect. Packing Terms Standard seaworthy export packing, wooden pallets with plastics protection for the sheet/plate; 15-20MT can be loaded into 20'container and 21-30MT is more suitable in 40'container; The other packing can be made based on the customer requirement. Delivery time 3~8 days workdays( in Stock); 10~25days workdays( out of Stock). Means of transportantion By sea, Main port: Qingdao,Tianjin,Shanghai,Dalian,Quanzhou,Guangzhou,Shenzhen By rail, Inland port: At mohe port, Fuyuan port, Suifenhe port, Alataw Pass, Pingxiang port. Application Aluminum Roofiing ,ceiling, wall Construction, decoration and packaging ect. ACP.wall cladding.facades.roofs and canopies.ceilings.signboards.blind window.display platforms. electrical panels.rain gutter,channel letter etc Used as decoration materials, like aluminum composite panel, aluminum ceiling, roofing; Used to manufacture aluminum curtain wall, roller shutter door, garages door; Apply to manufacture furniture, electronic industry; Used as pakcaging materials and home decoration.
1. Color coated aluminum strip is the aluminum coil surface coating coloring with AC,PE.HDPE,PVDF.FEVE. 2. Widely used in aluminum-plasticpanels aluminum veneer, aluminu Honeycomb panels, aluminum ceilings, roofing, trim, cans, electronics.aluminum performance is very stable, not easy to be corroded, the surface after a special treatment can achieve 30 years of qualityassurance. 3. The weight of the unit volume is the lightest metal materials, color coatedaluminum, is the most popular a new materials for construction building,decoration,packaging ect. Packing Terms Standard seaworthy export packing, wooden pallets with plastics protection for the sheet/plate; 15-20MT can be loaded into 20'container and 21-30MT is more suitable in 40'container; The other packing can be made based on the customer requirement. Delivery time 3~8 days workdays( in Stock); 10~25days workdays( out of Stock). Means of transportantion By sea, Main port: Qingdao,Tianjin,Shanghai,Dalian,Quanzhou,Guangzhou,Shenzhen By rail, Inland port: At mohe port, Fuyuan port, Suifenhe port, Alataw Pass, Pingxiang port. Application Aluminum Roofiing ,ceiling, wall Construction, decoration and packaging ect. ACP.wall cladding.facades.roofs and canopies.ceilings.signboards.blind window.display platforms. electrical panels.rain gutter,channel letter etc Used as decoration materials, like aluminum composite panel, aluminum ceiling, roofing; Used to manufacture aluminum curtain wall, roller shutter door, garages door; Apply to manufacture furniture, electronic industry; Used as pakcaging materials and home decoration.
SKU: QLF03Product DescriptionOutdoor Inflatable Playground With Pirate Ship SlideIf you love If you like chasing games ,, you must take this funny and nice game equipment for kidsâ?? backyard party and outdoor events. FeaturesHeavy duty commercial grade qualityCustom (color, size, logo and design)ApplicationsUsed in house , backyard , public , hotel , birthday party , school , amusement park , kindergarten , festival activity , advertisement , promotion , rental , etc .Advertages1. Superior Quality and Competitive Price 2. Excellent Design and Beautiful appearance 3. Convenience of installation 4. Durable, attractive,versatile,safety,waterproof and environment concernedSpecificationsMaterial18 oz / 0.55 mm PVC tarpaulinSizecustom sizeMOQ1 pieceWarranty2-3 yearsPackingPVC tarpaulin bags for inflatable, carton for blowerWhatâ??s Includedrepair kit and glue, durable packing bag. (blower is not included, feel free to buy from us at a discount price)CertificatesCE / UL / SGS / EN14960Pictures   CertificatesIncoterm: We accept EXW, FOB, C&F, CIF. Production time: Normally 7~15 days. Shipping time: 15 days â?? 35 days depends on seaport.FAQQ1. Whatâ??s included in products? Inflatable slide, blower or pump, kit bag(including the main colored materials, glue),ground sheet. Q2. Whatâ??s the daily consumption? This cost can be negligible as the blower consumes only a few units of electricity each day. Q3. Can you print my picture/logo on the inflatables? Yes, we can.Pls kindly offer your picture in any format made by Photoshop ,Coredraw or AI. Q4. Can you design one specially? Yes, just send us details or a sketch or a picture of your requirements or an idea. Q5. How to clean the inflatable games? Just use soap and water. Pls do not use any kind of solvents. Q6. How about your guarantee? Our inflatable slide can be used for over 3 years. If damaged, you can use the glue and material to repair it.If you have any questions, please contact us. Weâ??d like to hear from you.
Best sports Earphones : Using superior14mmaudio drivers combined with advanced audio techniques,provide quality simulated surround sound,bringing you vivid sound field, sound clarity, shock feeling sound to enhance immersive gaming experience. Best earphones for music : With noise suppression technology focus on your favorite music and answer calls without skips or missed words.14mmdrivers enhance your music with high-fidelity audio for better sound . Best in Ear Headphones for android : Strong bass stereo makes the beat more energetic and activates you during the sport. This best earphones for music have high fidelity sound, respect every sound , adopt OFC oxygen-free copper high fidelity line, good electrical conductivity and high fidelity. best in ear headphones for android description Built-in14mmlarge drive unit for high quality sound TPE green silk, soft anti-winding; The volume-adjustable microphone housing is compatible with all 3.5 connector devices. New image packaging design exquisite fashion These best sports earphones fit snugly, securely, and comfortably in ears throughout your runs. Additionally, they provide pretty good sound quality given the fact the speakers are small. If you are looking for headphones that provide a secure fit and good sound quality, then I would highly recommend these headphones. Looking for ideal Best Sports Earphones Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Best Earphones for Music are quality guaranteed. We are China Origin Factory of Best in Ear Headphones for Android. If you have any question, please feel free to contact us.
Best sports Earphones : Using superior14mmaudio drivers combined with advanced audio techniques,provide quality simulated surround sound,bringing you vivid sound field, sound clarity, shock feeling sound to enhance immersive gaming experience. Best earphones for music : With noise suppression technology focus on your favorite music and answer calls without skips or missed words.14mmdrivers enhance your music with high-fidelity audio for better sound . Best in Ear Headphones for android : Strong bass stereo makes the beat more energetic and activates you during the sport. This best earphones for music have high fidelity sound, respect every sound , adopt OFC oxygen-free copper high fidelity line, good electrical conductivity and high fidelity. best in ear headphones for android description Built-in14mmlarge drive unit for high quality sound TPE green silk, soft anti-winding; The volume-adjustable microphone housing is compatible with all 3.5 connector devices. New image packaging design exquisite fashion These best sports earphones fit snugly, securely, and comfortably in ears throughout your runs. Additionally, they provide pretty good sound quality given the fact the speakers are small. If you are looking for headphones that provide a secure fit and good sound quality, then I would highly recommend these headphones. Looking for ideal Best Sports Earphones Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Best Earphones for Music are quality guaranteed. We are China Origin Factory of Best in Ear Headphones for Android. If you have any question, please feel free to contact us.
HOLO PA Air Cooled Press Machine Air Cooled Press Machine splicing press belt vulcanizer HOLO PA serious air cooled press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC PU PVK). This splicing press vulcanizing machine No external control box, air pump, or water cooling tank are required. The HOLO presses are provided with electric heating and built in air cooling. The splice process runs fully automated. Product Description of belt vulcanizer Splice pressure is applied by an internal compressor, max. 2 bar Heats up to a splice temperature of max. 200°C Keeps it at the splice temperature (adjustable dwell time) Cools down to the cooling temperature (safe temperature to take the belt out) For thicker belts a preheat temperature and preheat dwell time can be applied The bottom heating can be set lower or higher than the top heating The splice plate surface is 130 mm wide Size PA300 PA600 PA900 PA1200 PA1500 PA1500H PA1800H PA2100H are available for now. Features and Benefits: Splice times as short as 8-12 minutes. All-in-one unit with no external components . Two dwell levels of temperature for thick belt . Light and easy to handle. Accessories and options Flight Case included for storage and easy tranport to on-site work. Press stand and extension cable is option for efficiency in the fabrication workshop. As a hot press splicing machine manufacturer, Honglong provides air cooled press machine, water cooled press machine, hot press machine, splicing press, belt joint machine, belt vulcanizer.
Customized U girder LRT bridge erecting beam launcher manufacturer is a professional design for U type bridge machine required for erection of city rail transit construction beam. As a kind of structure section, the U beam has good noise reduction effect, low construction height, high utilization ratio of cross section space. Because of U type beam for thin-walled opening structure, the traditional bridge rack beam cannot be applied directly. Unable to realize the traditional function of carrying beam traversing, beam body installation can only be achieved by traversing the crane. Therefore Shenghua heavy group U type bridge erecting machine with "front overhead crane beam, acquired vehicle girder, two cranes synchronous walking, then synchronized fall beam" of the process, simple operation, safe and stable. Safety is the most important issue for cranes. To ensure the safety, the following safety devices are equipped in Customized U girder LRT bridge erecting beam launcher manufacturer. 1.Crane traveling limit switch. 2.Overload protection device. 3.Lifting height limit device. 4.Voltage lower protection function. 5.Phase sequence protection function. 6.Emergency stop function. 7.Rain cover for outside hoist, driving units, electric cubicle. 8.Warnings indicator: flashing nights and warning sounds. 9.Wire-less infra-detector for anti-collusion.
The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN. Typical Applications: · Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets. · Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. · Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner. · Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle. · Scraps â?? Recoveries: Wheel disk, striker and hammer mill. · Automotive Industries: Shot blasting equipment. It is also used for its low coefficient of friction in metal-to-metal applications, its non-magnetic properties in electrical transformer assemblies and for industrial lifting magnets. A high manganese, fully austenitic, quench annealed, non magnetic, work-hardening steel with an exceptionally high level of wear resistance when subjected to work-hardening by shock or high impact pressure in service. The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plate) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself through out in-service life.The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility.
Chemical dry powder V-shape mixing machine price Product Description Features: 1.Major sections : barrel,screw ,spray system, feeding parts, discharging part and driven unit. 2. Sizes : available from 50Liter to 10000 Liters. 3. Material: Carbon Steel, Stainless Steel 304, Stainless Steel 316L 4,Discharge : Spherical valve or plum-blossom dislocation valve The drive of valve can be divided into manual, pneumatic, and electric. 5,Speed: Controls such as variable frequency drives, motor starters and operator stations are available. 6. Temperature :mixer can be equipped with heating or cooling jacket if temperature control is required, Spray nozzles for liquid introduction, 7. Application : Powder and liquid mixing, like Food, Pharmaceutics; Agriculture; powder metallurgy, pesticide, food, electronics, ceramics Working principle: Double ribbon mixer drive the material from two ends to centre through the help of the outer ribbon, while the inner ribbon push the material from centre to two ends, thus, material achieve a high mixing effect at short time. Dry powder double helix conical screw mixer machine is efficient mixing equipment set combined single spiral cantilever of Japan and advantages of theSLH double helix cone mixer in domestic?? The machine can be widely used in industry,of chemicals, pharmaceuticals, pesticides, fertilizers, dyes, metallurgy, mining, food, MSG, feed for solid - solid (powder and powder) mixed solid - liquid (ie, powder body add liquid ) mixed. Adaptability to the mixture: heat-sensitive materials will not overheat; hierarchical segregation phenomenon of the particulate material will not be crushing and grinding; the mixing does not occur between the proportion of different grain size materials; on the coarse-grained,a mixture of powder and a variety of fine and ultrafine particles, fibers or sheet material and has a good adaptability.
Key Specifications/Special Features Meaning of the index lights on the panel Index light Name Light Flash 1 (6) Temp setting In the state of temp setting - 1 (7) Refrigeration Refrigerating Ready to refrigerate, in the state ofcompressor start delay protection 1 (1) Heat Heating Ready to heat, in the state of compressorstart delay protection 1 (2) Defrost Defrosting Dripping or the state of compressor startdelay protection 1 (3) - - - 1 (4) Alarm - Alarm state Main Function Temperature display, temperature controlling(refrigeration/heat mode can be set),compressor start delay protection, 2 defrost modes (electric heat, hot gas), 2 defrost start mode (time alternation, accumulative compressor running time), 2 defrost end mode (timing, controlled by both temperature and time), dripping, manual defrost, sensor error alarm, one external alarm input, password, C/F unit change. Technique Index 1 Temperature display range: -50ï½?150â??(The resolution is 0.1â??) -58ï½?302â??(The resolution is 0.1â??) 2 Power supply: AC 220V±10% or AC 380V±10% 50Hz (Refer to the wiring diagram) 3 Operating environment: temperature -10â??ï½?50â??, humidityâ?¤85% 4 Relay contact capability: compressor 20A/250VAC, defrost 8A/250VAC (pure resistive load) 5 Temperature sensor: NTC R25=5kΩ, B (25/50) =3470K -
The Introduction of Electric tools Automatic balancing correction machine P typeItemsDetailsTypeFive-station(twin cutter/with automatic assembly line) MaincomponentsconfigurationCylinder:SMCServo motor: MitsubishiSensor:KEYENCE,OMRON,CONTRINEXLCD touch screen:KEYENCEControl PLC:KEYENCE KV-3000Stepping motor:Oriental MotorArmature DiameterStack height:12-30mmArmature diameter:Φ15~40Balancing speed1500-2100rpmMilling methodPieces cutterPowerAC380VAir supply0.4~0.6MpaInitial unbalance Cycle time(type ?¡)10-12s(primary survey, process on both side, repetition inspecting)Residual unbalanceeccentricityBetter than the national standard for Grade 6.3Volume(length x width x height)2000 x 1700 x 1800 mmI.Test PartProfessional long life industrial vibration sensor. High precision, quick active time,. II.CorrectionWe have the patent with fully independent intellectual property right, process in high efficiency. Balance grade better than G6.3 III.Features and advantage1.The critical components include Keyence PLC and SMC cylinder, servo motor and Oriental motor. THK??s slide rail and guide screw stable and reliable;2.The control software is developed independently by ourselves that can be upgraded according to the customer??s requirements. We also focus on the innovation to ensure our balance machine can be satisfying the customer requirements in future.3.To different armature, it??s easy to change cutter and fixtures, all proceed can be finished in 30-40 minutes. 4.The equipment with auto-transportation line. One operator can control 2-3 units equipment. It can be directly connected to automatic production line in order to start full automatic processing 5.Easy for workers to learn and set up. 6.Easy for maintain and low in cost. IV.Cycle time of Five-station I type Automatic Balancing MachineProcessing cycle time:10-12 seconds (include testing, milling)About 300-350 armatures per hour.Suit for DC motor, the diameter apply form 15mm to 40mm. Application:
Product Introduction This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc. 1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating. 2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency 3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products. What Technical of our machine? Technical Parameter Control System Paper Layer 3 layers Motor 3.0kw (1.5kw * 2pcs)Inner Diameter 5-12mm Motion Controller Panel MasterWall Thickness 0.3-1mm Operating Panel Panel MasterStable Speed 1-40m/min. Language EnglishWinding Nose Two noses single belt Inverter 3.7kw SchneiderMachine & parts Painting Electric Components SchneiderLength fixing Encoder Pneumatic Components JingweiSpeed Control By Inverter Servo Motor SchneiderCutting System Multi-blades; 5 pcs online Servo Driver SchneiderSynchronism tracking cutting system Servo motor synchronism tracking Screw Rod Shangyin Slider ShangyinPaper straw collecting Manually Bearing HaerbinOperator 1-2 person ConfigurationWorking Air Pressure 0.6Mpa Paper Reel Stand 3 LayersPower Supply 380V / 3phases / 50 Hz Gluing Unit 3 Layers Measurement & Weight Belt 5 PiecesMeasurement 3500*1500*1200mm Mandrel Shaft 2 Pieces Working Space 7000*5000mm Extra blades 5 PiecesWeight 1300kgs Useful Tool 1 Set
Product Introduction This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc. 1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating. 2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency 3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products. What Technical of our machine? CFXG-5002 Multi-cutters Paper Straw Machine Technical Parameter Control System Paper Layer 3 layers Motor 3.0kw (1.5kw * 2pcs) Inner Diameter 5-12mm Motion Controller Panel Master Wall Thickness 0.3-1mm Operating Panel Panel Master Stable Speed 1-40m/min. Language English Winding Nose Two noses single belt Inverter 3.7kw Schneider Machine & parts Painting Electric Components Schneider Length fixing Encoder Pneumatic Components Jingwei Speed Control By Inverter Servo Motor Schneider Cutting System Multi-blades; 5 pcs online Servo Driver Schneider Synchronism tracking cutting system Servo motor synchronism tracking Screw Rod Shangyin Slider Shangyin Paper straw collecting Manually Bearing Haerbin Operator 1-2 person Configuration Working Air Pressure 0.6Mpa Paper Reel Stand 3 Layers Power Supply 380V / 3phases / 50 Hz Gluing Unit 3 Layers Measurement & Weight Belt 5 Pieces Measurement 3500*1500*1200mm Mandrel Shaft 2 Pieces Working Space 7000*5000mm Extra blades 5 Pieces Weight 1300kgs Useful Tool 1 Set
Twitter: Korela Skype: Hfd Korela Fujian Hongfeida Automation Technology Co., Ltd. was founded in a capital coastal city : Fuzhou. After years of steady development, the company has gradually been more and more mature. The current office location is in Fuzhou Free Trade Zone. It is a company that specialized in the global import and export of various industrial automation products and technologies. The company has long-term cooperation with Europe, the United States, Japan and other global industrial manufactures. The company provides large-size DCS system spare parts, imported industrial robot spare parts, large-scale servo system motor drivers, frequency converters, solenoid valves, cylinders, flow meters, sensors, safety barriers, thermostats and other products. The company aims at helping customers extend the life cycle of electrical equipment, reduce operating costs, control the risk of stop production, and increase production efficiency. At present, the company's business covers all provinces and cities across the country. With many yearsâ?? experience, the company has mastered in the modes of service for system users, humanization of services, simplification of processes, and standardization of management. The number of famous companies it cooperates is over 1000, including AB, ABB, Schneider, SIEMENS, Honeywell, SEW and so on. Since the company can get these companiesâ?? products directly, costumes can afford them in a relatively cheap price. IC695PSA040 IC695PSD140 IC695CPU320-EH RX3i 1Ghz IC694MDL660 IC695ALG616 IC694MDL754 IC695ALG708 IC695NIU001 RX3i R911281505,MHD041B-144-NP1-UN Tightening the shaft motor EC304 MNR:0608701018 Â BOSCH Rexroth Module HCS02.1E-W0028-A-03-NNNN 1 Â REXROTH module HSZ01.1-D08-D04-NNNN 1 REXROTH 3HAC046686-002 1762-L40BWA SGMCS-04C3C11 3HNA024966-001 3HNA016162-001 3HNA024855-001 3HAC050363-001 3HNA023282-001 3HNA024203-001
Application and features : Applies in the workshop production of PE, PP, PVDF elbow, equal tee, four-way such as diameter, extended injection short pipe fittings, production pipe assembly; 45 ° and 60 ° y-shaped tee (Y type tee needs to choose and buy of 45 ° and 60 ° y-shaped three-way welding jig); Integration structure design, different welded pipe need to change the corresponding fixture can; The heating plate temperature control system independently, teflon coating; Electric cutter, safety limit switch, prevent accidental start milling cutter; Low start-up pressure, and high reliability sealing structure; Independent dual channel timer, can record the two periods of heat and cooling, timing alarm over, convenient for the user. Big dial, high-precision shock pressure, more readings clear; The heating plate, cutter adopts tilting, convenient operation; Products comply with 98/37 / EC and 73/23 / EEC standards. Optional components: Short flange welding special fixture. Short pipe welding special fixture 45 °, 60 ° y-shaped three-way welding jig The Main parameters: Model SD-AF315 Pipe sizes (mm) 90,110,125,140,160,180,200,225,250,280,315 Applications 0~90°Elbow, tee, cross, 45° and 60° wyes(optional parts should be used) Heating plate Max. Temp. 270?? Temp. deviation in surface(170~250??) ±7?? Pressure adjustable ranges 0ï½?16MPa Working voltage 380V,50Hz Heating plate power 5KW Hydraulic unit power 1.5 KW Planing tool power 0.75 KW Total power 7.25 KW Weight 760KG(Don`t include optional parts ) Packing Cases 4 Plywood Cases Volume 3.1 CBM
China HSHCL 100t mobile straddle carrier machine are basically lifting cranes mounted on tyres often used to replace gantry cranes for lifting and handling heavy loads in casting yards, factories, storage areas, ports and marinas. Compared to normal gantry cranes which move on fixed rails, the Straddle Carrier has the flexibility to lift and steer heavy loads in any direction on motorized wheels. These Straddle Carriers' lifting capacities normally range from 20t to 900t. Each machine is custom-designed and fabricated under tight supervision to meet the client's requirements. China HSHCL 100t mobile straddle carrier machine are equipped with reliable systems of hydraulic equipment, winches, ropes, and electric and hydraulic motors. These highly mechanized machines equip with emergency features and safety switches to ensure safe use. Our Straddle Carrier's Advantage 1. Latest drive technologies, variable motor speeds and integrated power management reduce operating costs and increase eco-efficiency. 2. Excellent handling, acceleration speed. 3. Innovative driver assistance features: safer operation, fatigue reduction. 4. Reduced maintenance thanks to direct drive units, high-quality components. Safety Features: China HSHCL 100t mobile straddle carrier machine is designed for safety. Winches are equipped with double breaking system. Upon request we provide Triple breaking system. Emergency stop button, Limit switch, sensor are located at designated location. 1. Have the function to monitor and record operation status of straddle carrier, the data could be recorded in local monitor and stored in the remote server to meet the demand on accidents analysis of straddle carrier; 2. Have the function to monitor wind velocity in the real time, which reminds driver to operate the straddle carrier safely; 3. Have the function of long distance monitoring on safety state of straddle carrier at real time, which could meet the demand on remote management.
Hdpe pipe production line consists of extruder , head die , vacuum calibrator water tank , tractor , cutting machine and stacker etc. With reasonable structure , stable property and high output , so it is ideal line to produce hdpe pipe products . composition of this line Single screw extruder 1 set mark line single screw extruder 1 set head die 1 set vacuum calibrating water tank 1 set 4 claws caterpillar tractor 1set planetary cutting machine 1set roller stacker1set electric controller unit 1set The screw and barrel are the key for whole machine , which is made of excellent alloy steel 38crmoal , and processed by nitriding and polishing with thickness 0.35-0.7 mm . so it can be used longer time and has the advantage of wear-resistance , corrosion resistance . About temperature control system , it can be used the temperature sensor and controller to be controled automaticlly . The mode is cast aluminum to be heated and blowers to be cooled . About the head die The head die is made of alloy steel , high strength , good wear-resistance . Stable extrusion shape , so it is good to be applied to the water supply pipe products . About the transport system , both gear and shaft parts are made of high strength alloy steel with carburizing and quenching , so it has the features of high loading capacity , stable running , low noise and high effiency etc.
Hdpe pipe production line consists of extruder , head die , vacuum calibrator water tank , tractor , cutting machine and stacker etc. With reasonable structure , stable property and high output , so it is ideal line to produce hdpe pipe products . composition of this line Single screw extruder 1 set mark line single screw extruder 1 set head die 1 set vacuum calibrating water tank 1 set 4 claws caterpillar tractor 1set planetary cutting machine 1set roller stacker1set electric controller unit 1set The screw and barrel are the key for whole machine , which is made of excellent alloy steel 38crmoal , and processed by nitriding and polishing with thickness 0.35-0.7 mm . so it can be used longer time and has the advantage of wear-resistance , corrosion resistance . About temperature control system , it can be used the temperature sensor and controller to be controled automaticlly . The mode is cast aluminum to be heated and blowers to be cooled . About the head die The head die is made of alloy steel , high strength , good wear-resistance . Stable extrusion shape , so it is good to be applied to the water supply pipe products . Vacuum calibrating water tank It is made of stainless steel to guarantee the long life time using .The whole body of water tank can be divided into 2 parts . One is for vacuum control and the other part is for spray control . Spray water tank It is made of stainless steel Haul-off machine It is running stable , it is not easy for the pipes to be distorted . Planetary cutting machine It is controlled by plc with high automation . Roller stacker It is controlled by pneumatic method . About the transport system , both gear and shaft parts are made of high strength alloy steel with carburizing and quenching , so it has the features of high loading capacity , stable running , low noise and high efficiency etc.
Needle Punching Machine Nonwoven Needle Punching Machine Middle-speed Needle-punching machine Features:Needle punch machine suitable for normal nonwoven geotextile production, such as needle punched cotton, shoe material, geotextile felt, etc.High speed counter needle punching machine is used for production of high-density and high-performance nonwovens such as PU leather substrate, top lining for automobile and filtering materials 1Model�GMZ-360M 2Dimension of M/C�L3600W1400H2025(mm) 3Weight�6100kg 4Total power�12.35kw 5Main motor�7.5KW; 3 phase AC power 50Hz/ 6Product density50g/-85 0g/(depend on the raw material type also product requirements and No of units) 7The average output�360kg/hour(Working at width 2500mm&300g/under running normal) 8ProtectionMain motor overload protection 9The control mode�Constant power & Inverter control 10Working width�2800mm/adjustable/cut at mid/product width more than 2500mm 11�Needle plate�Galvanized-faced ; with 3500holes/ 12Bearing�KOYO/Or according to the customer's requirements 13Type of holes�Diameter1.83mm/An inverted cone 14Electrical components�SIEMENS 15Inverter�ZhengTai 16Fabric speed Recycled material or man-made fiber material or mixing material 17Fabric speed0.5-11m/min(depend on the raw material type also product requirements) 18Trip of needle�40 mm 19Transfer roller�Diameter:168mm/ Chromium plating process/high quality 50# steel 20Needle plate High strength alloys and shock shape /totally 18 mm thickness 21The main shaft & other work shaft Diameter: 80mm/ Dynamic balance and strength strengthening heat treatment/high quality steel 22Print Color Grey 23The control cabinet and panel Digital display instrument, and equipped with knob regulator, professional electric schematic diagram 24NoteDirectionThe round-trip distance of the needle can be adaptive adjustment according to the thickness of the raw materials.
Melt filter double plate type continuousmelt filter Compare with the GM-SSP series single plate type hydraulic screen changer, this GM-DSP series double plate type continuous screen changer for plastic extruder has a obvious advantage : continuous operation. The structure: 1,two pieces of slide plate instead of one slide plate 2,one screen cavity on each slide plate insteads two screen cavities on one slide plate. And this kind GM-DSP series double plate screen changer owns the feature of single plate hydraulic screen changer: a quick screen change process. This GM-DSP series Double plate type continuous screen changer for plastic extruder is consist of The main body of the screen changer Hydraulic unit with accumulator Electrical controlling pack (This part is optional choice by customers) Characteristics of GM-DSP series continuous screen changer for plastic extruder Double plate type continuous screen changer for plastic extruder Two round removable breaker plates on each slide plate "Continuous type" means operation of screen change without machine halt or disruption of melt flow. Equiped with air venting system Fit for almost all kinds of polymers It works well under the high pressure 400bar(40Mpa) not impact the high performance. The filtration screen area covers from 100cmo 980cm², depending on the size, fit for output range from 100kg/h to 3700kg/h.
