HOLO PA Air Cooled Press Machine Air Cooled Press Machine splicing press belt vulcanizer HOLO PA serious air cooled press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC PU PVK). This splicing press vulcanizing machine No external control box, air pump, or water cooling tank are required. The HOLO presses are provided with electric heating and built in air cooling. The splice process runs fully automated. Product Description of belt vulcanizer Splice pressure is applied by an internal compressor, max. 2 bar Heats up to a splice temperature of max. 200°C Keeps it at the splice temperature (adjustable dwell time) Cools down to the cooling temperature (safe temperature to take the belt out) For thicker belts a preheat temperature and preheat dwell time can be applied The bottom heating can be set lower or higher than the top heating The splice plate surface is 130 mm wide Size PA300 PA600 PA900 PA1200 PA1500 PA1500H PA1800H PA2100H are available for now. Features and Benefits: Splice times as short as 8-12 minutes. All-in-one unit with no external components . Two dwell levels of temperature for thick belt . Light and easy to handle. Accessories and options Flight Case included for storage and easy tranport to on-site work. Press stand and extension cable is option for efficiency in the fabrication workshop. As a hot press splicing machine manufacturer, Honglong provides air cooled press machine, water cooled press machine, hot press machine, splicing press, belt joint machine, belt vulcanizer.
Product description: Air cooled all-in-one designed splicer is the new generation of splice equipment for belt splicing both on site and in the workshop.Loyicn air cool splicing press especially important for on site is reliability of the equipment, less weight, less set-up time, and very short splicing time. The presses are supplied with a flight case for both storage purposes and also for easy transport to on-site jobs. The unique loyicn technology ensures global uniform splicing and with its features and benefits: 1. Improved quality, efficiency (speed) and precision 2. Consistent, reliable splice results and superior belt appearance 3. Less shrinkage of fingers, providing stronger, flatter splices 4. No maintenance. On site benefits include: 1. Short cycle time, approx. 10 minutes or less depending on belt type 2. Lightweight components 3. No water or forced air cooling necessary 4. Less production downtime 5. Easy transport around the plant Air cooling press opration vedio link: https://youtu.Be/x2j7zazikfo Loyicn air cool hot press operation manual download
HOLO PB Water Cooled Press Machine hot press machine splicing press belt vulcanizer HOLO water cooled press machine, belt vulcanzier is a conveyor belt joint machine for splicing pvc pu pvk conveyor belt . The press is divided into 2 parts (top and bottom). Each aluminium platens with heating elements, cooling pipes and temperature probes. Automatic control of the whole splicing process. Cooled by Water. Product Description of hot press machine Available for several belt widths: from 600mm up to 5000mm. From 600mm-2100mm made by stainless steel,Up to 2100mm made by Aluminium. Up and Bottom heating platen can set to different temperature. Length of heating platen: 150mm or 200mm. Features and Benefits: Easy to program control unit. Up and bottom plate can be different temperature . Ongoing works without breaks. For widest belt up to 5000mm. Economy and practicality. Accessories and options Control Box .Water Pump ship along with machine. Air Compressor need prepare by yourself. As a hot press splicing machine manufacturer, Honglong provides air cooled press machine, water cooled press machine, hot press machine, splicing press, belt joint machine, belt vulcanizer.
Holo ca cutting slitting machine Belt cutting machine Belt slitting machine Cutting machine Holo ca cutting machine is using for slit wide belt into nerrow width . Ecnomic design without winder and rewinder units . Standard size 2m 3m(3m machine with hydraumatic pressure device to help fix belt) Product description of belt slitting machine Electrical & pneumatic control panel including the speed control, roller adjustment. The complete assembly, when you get the machine, can use immediately Max belt thickness 5mm Cutting speed adjustable Standard with 8 blades Features and benefits of belt cutting machine Easy operation Rapid and precision Accessories and options Length counter is optional Honglong can provide cutting, slitting machine such as belt cutting maching and belt slitting machine.
HOLO CA Cutting/ Slitting Machine belt cutting machine belt slitting machine cutting machine HOLO CA Cutting machine is using for slit wide belt into nerrow width . Ecnomic design without winder and rewinder units . Standard size 2M machine with hydraumatic pressure device to help fix belt) Product Description of belt slitting machine Electrical & Pneumatic control panel including the speed control, roller adjustment. The complete assembly, when you get the machine, can use immediately Max belt thickness 5mm Cutting speed adjustable Standard with 8 blades Features and Benefits of belt cutting machine Easy operation Rapid and precisi on Accessories and options Length Counter is optional Honglong can provide cutting, slitting machine such as belt cutting maching and belt slitting machine.
HOLO SB130 Ply Separator 130 Ply Separator belt splitting machine Ply Separator 750 Ply Separator The HOLO SB130 Separator is used to separate between the plies of a conveyor belt. This cutting action is often required in preparation before splicing a belt with a splice press. If the belt thickness more than 4mm ,this machine will be needed to help joint the belt with more strength. It is an ecnomic choise compare with SC130 Ply separator Product Description of 750 Ply Separator Split width 130mm Split thickness max 10mm with pedal switch, easy operation Power: 750W Features and Benefits Good performation o n normal belt Easy operation Economic practicality As a ply separator manufacturer, Honglong provides ecnomic ply separator such as 130 ply separator, 750 ply separator, belt splitting machine.
HOLO SC 130 New Ply Separator Ply Separator Ecnomic Ply Separator 130 Ply Separator HOLO SC 130 ply seperator is used for separator between each plies of a conveyor belt. This cutting action is applied to prepare a fiver over finger splicing belt with 2 or 3 separations within one belt. It is also possible allow user to creat films from belt for splicing process . Product Description of Ply Separator Split deepth up to 130mm . With only one handle allow precise splitting thickness up to 10mm . New Hard alloy steel knife,better performance on thin Pu belt . With scale, high precision separation and easy work, high efficiency. Foot pedal start / stop with cover, work more safe. Features and Benefits Easy deepth adjustment Capable of splitting belts up to 10 mm thick. Better performance on hard belt. Safe and Convenient. Accessories and Options Optional stand ,allowing to be portable within workshop. As a ply separator manufacturer, Honglong provides ecnomic ply separator such as 130 ply separator, 750 ply separator, belt splitting machine.
HOLO QA1000 High Frequency Welding Machine High Frequency Welding Machine cleat welding machine HF welding machine HOLO QA100 High Frequency welding machine is using for Fabrications of various cleats,steps and sidewalls can be done easily with this High.Frequency welding machine. for conveyor belt that made in PVC and PU. Product Description of cleat welding machine The HF Welding machine utilizes high frequency electromagnetic field to make it's internal molecular rearrange. The effect of welding is beautiful and firm . The strength of welding is close to the strength of raw materials. Features and Benefits of HF welding machine Machine groove is deep and wide, convenients to weld large area. Adopting high senstive spark protect device to avoid damaging the mould welding length can be extended to 50mm or longer for one time Accessories and opt ions Sidewall mould as per request Cleat mould T10 T20-60 T70-80 as Per request Honglong, provides high frequency welding machine such as hf welding machine, sidewall welding machine, cleat ,sidewall welding machine, v guide welding machine such as profile welding machine.
HOLO TC Manual Finger Puncher Manual Finger Puncher Machine Finger Puncher Machine belt Finger puncher HOLO TC series manual finger Punching machine is designed to punch fingers on the end of lightweight thermoplastic conveyor belt as a preparation of making fingers or finger over finger before splicing . No need electricity and air pressure for it's operation . the punching forces is created by pulling the lever . Easily done with one hand by a person . Because it is easy set-up and manual operation. Ideal tool for working on location as well as on workshop. Product Description of belt Finger puncher Light weight and portable design,no need electr ic,no need air pressure. Both side open design, no wi dth limited Single finger splice & double fingers splice Standard blade 15*75mm or 20*50mm Maximum thickness is up to 5mm for lightweight belt. Features and Benefits Portable, manual and easy handling. No electricity or pressure required. Open ended for wider belts. Single or Finger over finger punching. Accessories and options Standard blade is 15*75mm for single finger or 20*50mm for finger over finger . 10*80 20*80 can be custom-made Bias punching board can be custom-made. Honglong can provide high efficiency finger punching machines including manual finger puncher machine, pneumatic, automatic, semi-auto puncher machine, finger cut machine, belt finger puncher.
Holo sc 130 new ply separator Ply separator Ecnomic ply separator 130 ply separator Holo sc 130 ply seperator is used for separator between each plies of a conveyor belt. This cutting action is applied to prepare a fiver over finger splicing belt with 2 or 3 separations within one belt. It is also possible allow user to creat films from belt for splicing process . Product description of ply separator Split deepth up to 130mm . With only one handle allow precise splitting thickness up to 10mm . New hard alloy steel knife, better performance on thin pu belt . With scale, high precision separation and easy work, high efficiency. Foot pedal start / stop with cover, work more safe. Features and benefits Easy deepth adjustment Capable of splitting bel ts up to 10 mm thick. Better performance on hard belt. Safe and convenient. Accessories and options Optional stand , allowing to be portable within workshop. As a ply separator manufacturer, honglong provides ecnomic ply separator such as 130 ply separator, 750 ply separator, belt splitting machine.
