ZL-2 model steam air heater with Left-Right Circulation is consists of 7 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan+ Fresh air damper + electric control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by steam heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 1.Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3ï¼?Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 4. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
DL-2 model electric air heater with Left-Right Circulation is consists with 6 parts: electric heater + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by electric heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Automatic control system, group start and close, low load, precise temperature control 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
TL-3 model Direct burning furnace with lower Inlet and upper outlet is consists of 8 parts: natural gas burner + inner tank + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After fully combusts the natural gas inside the inner tank, it�´s mixed with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
Introduction The ARSP series micropore membrane filter cartridge is made of PP microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. In order to meet the market demand for high-flow filtration, the product increases the effective filtration area of the membrane. It has the characteristics of high flow rate, long service life, stable structure and wide chemical compatibility, which are conducive to enhancing the filtration efficiency of liquids. It is mainly used for liquid filtration in large-scale LCD and touch panel processes, such as substrate cleaning, stripping, etching, developer and deionized water rinsing, etc. It also meets the demand for large flow rates in the chemical and food industries. Specification Filter material: PP micropore filter membrane Diameter: 131 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 334 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents Food industry: Beverage, alcohol
Introduction The ARBP series micropore membrane filter cartridge is made of polypropylene microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its large diameter design increases the filtration area, effectively reducing the quantity of filter cartridges used and the frequency of replacements, thereby lowering production costs. Due to its high flow rate and large dirt-holding capacity, this product is widely used in the filtration of liquid chemicals in the manufacturing process of LCD and touch panel, such as substrate cleaning, stripping, etching and deionized water rinsing. Specification Filter material: PP micropore filter membrane Diameter: 83 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 226 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents
Features Honda GX630 V-Twin Commercial Grade Engine More power, greater fuel economy & reduced emissions Electric Starting System (Battery Included) Makes starting this generator an easy task Oil Alert�® Warning System Shuts the engine down if oil reaches an unsafe operating level Digital Auto Voltage Regulator (DAVR) Ensures a consistent flow of power regardless of load Holding the voltage stable within 1% to provide clean power i-Monitorâ?¢ Digital Operation System Provides info for hours, wattage & engine speed Diagnostics for convenient dealer servicing 8.2 Gallon Fuel Tank w/ Fuel Gauge Provides extended run time for backup applications Full Panel GFCI Protection - OSHA Compliant Must use GFI type manual transfer switch for panel connection Not for use with interlock kit Extremely Quiet Operates at 76 dB @ 23' (equivalent to the sound of a vacuum) Also Includes, Wheel Kit, Locking-Folding Handles and Lifting Eye
American Electric Veller Features 350-watt rear hub motor Lithium-ion battery with 7 lightweight lithium cells running at 36 volts 10 amps 100% hand welded lightweight aluminum frame LED Panel for the Power Assist System (PAS) located on the handlebars with 4-speed options. 7 Speed Shimano Tourney Gears & Shifter Comes standard with a removable basket, bell, rear reflector & tool kit at no extra cost. Easy to get on and off Excellent warranty! Designed and Assembled in the USA Motor 350 Watt Rear Hub Brushless Motor Battery 36V 10AH Long-range Lithium-Ion (Removable) Charging Time 3 â?? 4 Hours Range 35 â?? 40 Miles can still be pedaled if the battery dies Display LED Panel with 4 Speed Options â?? Zero (pedal only) Derailleur 7 Speed Shimano Tourney�® Throttle Type Pedal Assist Technology Brakes Front and Rear Disk Brakes Tires 26 x 1.75 Performance Tires on Aluminum Rust-Proof Wheels Frame 100% Aluminum Very Light Weight / 18 Step-Through Forks Aria Zoom Aluminum Fork (Light Weight) Seat Comfort Cruiser Seat With Suspension Pedals Aluminum Pedals
The water baths are designed and manufactured to comply with the requirements of the various pharmaceutical and lab industries. Tempo Water Bath have S.S. 316 Interior and S.S. 304 exterior. Temperature Range is from 5�°C above ambient to 99�°C max. Temperature is controlled by PID controller. Equipment is supplied with Pyramidal Lid. Temperature range â?? 5�°C above ambient to 99�°C Supply â?? 230V, AC Features : Safety temperature controller Low water level indicator Timer with alarm European plug Stainless Steel water drainage IP20 protection for control panel Drain for water supply Inlet nozzle for water filling
Amongo's industrial flush rear 18 inch LCD monitor are designed to be fully enclosed and fixed from the back, usually with VESA holes backside, for combination with a desktop stand during installation. Also our lines of flush rear mount monitors can be customized according to your detailed requirement, from LCD panel, touchscreens, interface connector. The flush rear mount monitors are very suitable for application for console or control center. Amongo, as an excellent industrial monitor manufacturer, offers a wide range of lcd display monitors for you to choose from.
Width Range: 600mm-2630mm Surface Treatment: Mill finished,Coated,Embossed etc. Conditions: HO,H12, H14, H16, H26 etc. Coil Weight: 3-5tons Coil ID: 505mm MOQ: 3MT Material Quality: Tension level ,Flat,Free of defects like oil stain,Roll Marks,waves ,dents ,Scratch,etc A+++ quality Customize size: Size can be produced as per clients requirement Application: Building,Roofing,Indoor,Outdoor,Truck Panel,Rolling shutter ,Cups etc. Delivery time 20days after 30% T/T payment or receiving L/C copy To get more details, pls contact
Pallet wrapping machine Turntable diameter 1500mm(customised) Max.wrapping height 2100mm(customised) Max.Loading 2000kgs� (can customize 3000kg) With Ramp optional Voltage 110/220/240V 1phase� 220/380/415V 3phase� 50HZ/60HZ Machine weight 600kgs H.S 84224000 Operate panel Text screen (english languages) Film carriage Pre-stretch system up to 250%-350% Rotary speed 0~15rpm rotary speed, adjustable, steady start and stop Packing efficiency 20-40 pallet/h
Product Details ADC12+aviation grade 6063 aluminum housing. Precision die-cast aluminum housing, strong and durable. Double-sided high-efficiency monocrystalline silicon solar panels, with a lifespan of up to 15 years. Precisely adjustable module angle, the number of modules can be increased or decreased. The photoelectric conversion efficiency is as high as 22% on the front and 16% on the back. IP65, IK10, resistant to 14 grade typhoons, installation height 8-10 meters. Applicable to places such as highways, parks, schools, squares, communities, parking lots, etc. A variety of light distribution options, different installation methods, multiple working modes, industrial-grade waterproof, suitable for installation in various outdoor environments
The parameters of the 8-liter pearl pot are as follows (fully intelligent setting) 1. Customizable 110V, 220V, English export and cross-border e-commerce versions, Provide American, British, European, Australian and other power cables. 2. Chinese operation panel, English manual, English nameplate, English Certificate of conformity, neutral packaging. 3. Power: 1350W 4. Material: Aluminum alloy non stick inner liner 5. Single unit weight: 6kg, packaging size: 41cm * 31cm * 35.5cm 6. 4 units per piece: 25kg 7. Packaging type: One unit, one white bag+difference sticker (can be labeled)
Hanging frame composition Assembled from 9 stacked, wide-edged frames, the "Emile" hanging jumble adopts a diamond shape. In raw light wood or decorated with 1-color geometric motifs, each photo frame features a protective glass panel. Multi-format display A reflection of multiple experiences, the 9-view pell-mell is designed for 10x15 cm vertical and horizontal photo prints, and 10x10 cm square prints. Alternate landscapes and portraits, general views and close-ups for a lively, colorful display.The little deco plus Inspired by travel, bohemian-style decor favors natural materials and handcrafted objects.
Needle thread tension for sewing parallel and bar tacking sections of buttonholes can be separately controlled through the operation panel and stored in memory according to various sewing conditions (e.g., type of thread, type of material, and sewing speed). The machine is able to change the needle thread tensions at the parallel and bar tacking sections of the buttonhole. to produce a beautiful buttonhole shape. This capability helps greatly in preventing thread breakage. Needle thread tension is activated at the beginning and end of sewing. This prevents unthreading of the needle thread. and thread fraying that is likely to occur at the beginning of sewing. Thread tension for basting stitching can be specified separately.
Lead PVC Heat Stabilizer are the most commonly used heat stabilizers for PVC, and are also very useful heat stabilizersï¼?BG series pvc stabilizer of Homart Technology is made by special composite technology which can used for PVC Panel, PVC Pipe,PVC Window Profile and etc. The stabilizers is lubricant one-pack stabilizer, it has good initial coloring,lubricity and weather resistance, suitable for high filling formula. In addition, it is can promote pvc compound plasticization, long thermal stability time, stable reprocessing performance which can reduce mechanical failures and extend the extruder life of 3-5 years.
When your testing requires a walk in rooms choose TEMPO controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every TEMPO environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data. Temperature range â?? 2 C to 8 C Temperature accuracy â?? �±0.5 C Temperature uniformity â?? �±2 C Control System : Microprocessor based PLC (up to 5000 readings) with 7â?³ touch screen colour HMI, which gives the direct display of process value and set the value of temperature and humidity inside the chamber. High speed ethernet based communication. Refrigeration System : The refrigeration is provided by means of CFC free hermetically sealed Emerson Copland compressor for better cooling with eco-friendly refrigerant. The cooling system is made up of split type so as one can place the compressor coupled with condenser unit in a well ventilated area to avoid hot air throw in the stability room. The inbuilt stand by refrigeration system is provided with auto change over the facility. Features : Negligible maintenance the sturdy design and long lasting finish ensures minimum maintenance for years. Minimal heat transferthe tongue and groove edges of all panels are moulded to close tolerance ensuring a tight fit between panels. These prevent condensation from forming on the foam and minimize heat transfer. Quality accessories hardware like hinges, handles etc. on panels from best indigenous suppliers.
SMC (Sheet Moulding Compound) water tanks are made of a composite material consisting of thermosetting resin, glass fibers, and mineral fillers. The material is molded into panels and then assembled to form a water tank of the desired size and shape. SMC water tanks are durable, lightweight, and resistant to corrosion, making them ideal for outdoor and indoor applications, such as residential, commercial, and industrial water storage. GRP (Glass Reinforced Plastic) water tanks are also made of composite material, but they use a different manufacturing process. GRP tanks are made of layers of fiberglass reinforced with resin and formed into a seamless, one-piece vessel. Like SMC tanks, GRP tanks are lightweight and durable, and they are also resistant to corrosion and UV radiation. They are commonly used for industrial applications, as well as for residential and commercial water storage. GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness.
Color-coated aluminum coils are painted on the surface of aluminum substrates. Commonly used are fluorocarbon color-coated aluminum coils and polyester color-coated aluminum coils. They are widely used in aluminum-plastic panels, industrial factory roofs and walls, aluminum louvers, and composite panels. , aluminum ceilings, cans, electronic products. Commonly used alloy numbers for colored aluminum coils include AA1050, 1060, 1100, 3003, 3004, 3105, 5052, 5005, 5754, 5083, 6061, 6063, 8011, etc. Characteristics of color-coated aluminum coils: 1. Smoothness: There are no composite high temperature indentations on the surface. There is no residual stress on the board surface and no deformation after shearing. 2. Decoration: Painted with wood grain and stone grain, it has a realistic physical texture and a vivid natural beauty. The patterns can be made randomly, giving customers a wide range of personal choices, enriching the humanistic connotation of the product, and giving people more beautiful enjoyment. 3. Weather resistance: The paint pattern formed by continuous coating and high-temperature baking has high gloss retention, good color stability, and minimal color difference changes. Polyester paint has a 10-year warranty, and fluorocarbon paint has a 20-year or more warranty. 4. Mechanical: Use high-quality aluminum materials, plastics and adhesives, and adopt advanced composite technology. The product has the bending and flexural strength required for decorative panels. Under four-season climate conditions, changes in wind pressure, temperature, humidity and other factors will not cause bending, deformation, expansion, etc. 5. Environmental protection: It is resistant to salt, alkali and acid rain corrosion. It will not corrode or produce poisonous bacteria. It will not release any toxic gases and will not cause corrosion of keels and fixings. It is flame retardant. According to national regulations, it shall not be lower than B1 level.
