83 Series Filter Cartridge

OD 6 152.4mm L 40 1016mm 60 1524mm Flow 110m3h 60 Rate 1,3,5,10,30,50,70 Micron. Material PP Glass fiber Replacement PALL Pentair, Aquatec, Eaton, Graver, Mahle, Aqua

Introduction The ARLP series micropore filter cartridge is made of PP microfiber as the filtration medium, and the filtration material meets the relevant FDA requirements. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its main features include low filtration resistance, high dirt-holding capacity, long service life, stable structure, wide chemical compatibility, etc. It is suitable for pre-filtration of various liquids. Specification Filter material: PP micropore filter membrane Diameter: 69 mm Pore size: 0.1 ~ 60 micron Length: 5" ~ 60 " Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Primary filtration of filtration systems in the pharmaceutical, chemical solvent, food and beverage, microelectronic industries, pure water systems, petrochemical and other industries.

RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media in between, it removes sediments as well as organic pollution from water. Specification RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually GAC) in between, it removes sediments as well as organic pollution from water. Compare to traditional UDF filter, RFC filter provides higher flow rate and better sediment reduction. Features NSF Certified activated carbon High flow rate Low pressure drop Rapid dechlorination Technical data Maximum temperature

PP , Melt blown filter cartridge, 5 micron. ID:1.1(28mm) OD:2.5(63mm) L:10 (254mm)

Barrel Series CARBON Filter cartridges Barrel Series carbon filter cartridges have many applications. Our Mission is always to get rid of odors or harmful gases in the air inlet and / or outlet. Our carbon filter cartridges are successfully applied: airports, clean rooms, hospitals, data center, industrial kitchens, farm, museums, archives, and offices. In industry it is often a question of ridding the exhaust air of harmful gases. The Environmental Nuisance Act is often in force for these types of applications

GE Series are all-polypropylene filter cartridges with an economically efficient design which is suitable for a wide range of process applications .The pleated polypropylene filter material provides a large filtration surface area which allows for maximized flow rate in the system.Available in nominal retention ratings from 0.1 to 50 micron.

sintered disc filters consist of highly uniform, interconnected networks of pores with tortuous paths that trap solid particles in gas or liquid. Excellent depth filters with superior mechanical strength. Stainless Steel Type 316L withstands temperatures up to 750F (399C) in oxidizing and 900F (482C) in reducing environments. These filters can be cleaned by other methods, such as ultrasonic baths or reverse flow flushing. If your application requires even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available.

Introduction The ARSP series micropore membrane filter cartridge is made of PP microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. In order to meet the market demand for high-flow filtration, the product increases the effective filtration area of the membrane. It has the characteristics of high flow rate, long service life, stable structure and wide chemical compatibility, which are conducive to enhancing the filtration efficiency of liquids. It is mainly used for liquid filtration in large-scale LCD and touch panel processes, such as substrate cleaning, stripping, etching, developer and deionized water rinsing, etc. It also meets the demand for large flow rates in the chemical and food industries. Specification Filter material: PP micropore filter membrane Diameter: 131 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 334 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents Food industry: Beverage, alcohol

MCB series molded carbon block filter is made of PAC (powdered activated carbon) and polyester fiber, with high adsorbtion capacity and long service life. Molded blocking method results in lower carbon fine release and higher efficiency. Specification Comparing to traditional carbon block filters, molded blocking method makes it possible to bind PAC and polyester fiber together, capacity of adsorbtion is upgraded dramatically with the same cartridge size. MCB series filters can be used for drinking, commercial, and industrial water and industrial liquids purification, with standard sizes of 2.5"x10", 2.5"x20", 2.5"x30" , 2.5"x40", 4.5"x10" and 4.5"x20". FEATURES Molded block method Ultra high adsorbtion efficiency Long service life Low pressure drop TECHNICAL DATA Maximum temperature: 39.2-176 F (4-80 C) Recommend flow rate per 10 1.06gpm (4L/min) Maximum replacement p: 14.5psi (1.0bar) Service life per 10 5000G 1GPM Pressure drop: