What is an Automated External Defibrillator (AED)? 1. An automated external defibrillator (AED) is an emergency medical device that automatically analyzes the electrocar-diogram in an emergency, and deliver an electric shock, if necessary, to recover the cardiac 2. In cardiac arrest, quick CPR and use of AED can save a life. Major Functions and Features 1. Easy : When a pad is attached, automatically analyze the ECG (electrocardiogram) and inform the necessity of electrical impulses by audio instruction system 2. Convenient : Turn on the device and use a pad for adult/pediatric treatment connected in advance 3. Smart : Smart use from regular self-inspections and automatic audio recording of sounds from surrounding environment after attaching a pad 4. Safe : Safe use from notifications for remaining battery, pad status, and operating temperature Product specifications 1. Model name : Heart+ResQ NT-381.C 2. Set Configuration : Defibrillator, battery pack, sealed electrode pads, Heart+ResQ User Guide, Protective Carrying Case,"NT-MPR" CD-ROM, Bluetooth Adaptor (optional) 3. Waveform : Truncated Exponential Biphasic 4. Energy - 150J (adult, impedance 500) - 50J (pediatric, impedance 50Q) 5. ShockChargelimeI : 9 seconds 6. Shock Method : Manual button (flashes when ready) 7. Dimensions : 220mm (W) x 282mm (L) x 80mm (H) 8. Weight : 2kg (including battery and pads) * We hope to trade under EXW conditions.
Allen Bradley 1746-A10 PRODUCT DESCRIBE: The Allen-Bradley 1746-A10 is a modular chassis used with the SLC 500 system. The 1746-A10 has 10 slots for mounting tabs. Its modular nature helps to configure the system depending on its size. Users can shrink or expand the system. To expand the module slots to 30 slots, use the chassis interconnect cables to interconnect with other chassis. The Input/Output adapter or the processor are placed on the left most slot in the 3-chassis group. The 1746-A10 has 6 mounting compartments. When installing the 1746-A10, make sure to provide for enough grounding. For grounding, use the grounding bus. The grounding cable should be 14 AWG in size. When connecting to the ground bus, use a 10 AWG copper wire to connect each chassis and use a steel enclosure to prevent EMI interference. To minimize the dependence on the viewing window hinges for the electrical contact between the door and the enclosure, install a dedicated bonding wire. The grounding electrode used with the 1746-A10 should have a minimum of 8 AWG copper wire size. Product details : In stock Original package condition: brand new Warranty: 360 days Payment: T/T Part of the products 1756-L55M13 1756-L55M14 1756-L55M16 1756-L55M22 1756-L55M23 1756-L55M24 1756-L60M03SE 1756-L61 1756-L61S 1756-L62 1756-L62S 1756-L63 1756-L63/A 1756-L63/B 1756-L63S 1756-L63XT 1756-L64 1756-L65 1756-L71 1756-L71/B
ASTM/AISI Standard Alloy Round Bar AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher carbon content. American Iron and Steel Institute (AISI 4140) is a member of the low alloy tool steel family characterized by small quantities of trace elements added to an otherwise simple steel. These trace elements, when compared with more simple steel such as 1040, improves the characteristics of 4140 . However, because 4140 remains relatively simple, it is used in a wider range of applications than more specialized tool steels like the D or S series of steel. Specifications · Grade: Alloy steel · Standard: AISI, ASTM, BS, DIN, GB, JIS · OD:10-500mm · Thickness: Max:800mm · Width: 205mm~2300mm · Length: 1000mm~6000mm · Place of Origin: China (Mainland) · Model Number: 1.7220 / SCM430 / 30CrMo4 / 4130 ; 4140/42CrMo4/1.7225; En24 34CrNiMo6 1.6582 4340. · Application: Mould steel · Technique: Forged · Special Use: Mold Steel ,Statically and dynamically stressed components for vehicles, engines and machines. For parts of larger cross-sections, crankshafts, gears. · Shape: Round bars/Flat bar/Plate · Technology: Hot Rolled/Forged/Clod Draw · Heat treatment: Annealing/Q+T · Surface treatment:Black/Peeling/Polishing/Machined · Delivery condition: Hot rolled or forged/ Peeled or black surface/annealed or QT · Customer's logo: Available · Test: SGS/UT100%/Elements testing · Certificate: ISO/Mill certificate · Experience: Ten years manufacturer experience General Scope One of the most popular alloys for Oil Field applications, a high proportion of which is in Tubular form for downhole tools and accessories.
please directly contact terry.zheng at carbinpower dot com for more information Q: Why Carbin? A: CARBIN is different and always INNOVATING - Specialized in differentiated products and services to global market. Carbin products will make our partners exclusive and enable partners to provide more choices to clients. More Choices Create More Opportunities. 160A / 300A Auto-choke Gasoline / Diesel (Current-adjustable) Welder Generator Main Parameters: Model Gasoline 160A / 300A Diesel 300A CCC Certification CCC Certified - Welding Mode Manual Arc Welding Manual Arc Welding No Load Voltage 65 V 65 V Welding Voltage 22-28 V 28-75V Welding Current 50-210 A / 70-300A Max 300A Current Adjustor Yes based on demand of client / No Yes based on demand of client / No Continued Load Running Rate 60% 60% Auxiliary Power Output DC 230V, 400W / DC, 230V, 1000W DC, 230 V, 1000 W Welding Electrode Size 2.5-4.0 mm / 2.5-5.0 mm 2.5-5.0 mm Engine Model 170F / 192F 192FD Engine Type Single Cylinder, Air Cooling, 4 - Stroke, OHC Single Cylinder, Air Cooling, 4-Stroke, Direct Fuel Injection Fuel Supply System Carburetor Diesel Displacement 208CC / 420CC 498CC Starting Method Recoil / Key Start Recoil / Key Start Fuel Tank, Oil Capacity 3.6L, 0.6L / 6.5L, 1.1L 5.0L/1.65L Gross Weight 38 KG / 54KG 87 KG Net Weight 36 KG / 56KG 83 KG Packing Size L�?W�?H 520�?410�?535 mm / 570�?535�?570 mm 650�?530�?630 mm Container Load 240 to 160 units/20GP 500 to 360 units/40GP 620 to 360 units/40HQ 110 units/20GP 220 units/40GP 300 units/40HQ Unique features different with conventional gasoline welder generators: Carbin unique Current-adjustable design Carbin Current Adjustor in Welder Generator can provide adjustable stable current output which will highly increase the welding efficiency. Synchronous power generating and welding Carbin brand Smart Engineering Welder KB160A outputs welding current strong enough to power argon arc welding, and generating DC current for another electrical appliance at the same time, making possible to operate welding job and power generating at the same time, being an ideal power tool for outdoor working site where urban power supply not available. Carbin brand Smart Engineering Welder outputs 300A current strong enough to power argon arc welding, making possible to operate welding job and power generating at the same time, being a pioneer in powering 300A welder with single cylinder gasoline engine for best cost-effective benefits. Light weight, portable makes competitive price KB160A - Net weight of 36 KG for 2.5 �?? 4.0 mm electrode welding KB300A - Net weight of 54 KG for 2.5 �?? 5.0 mm electrode welding
Just yesterday, I received a repeat order from Andy for a hydraulic flow control valve, which is just 3 months away from the delivery time of the last batch of hydraulic valves. The American customer Andy, started to communicate with us in 2019. Maybe it was just not the right time, we still didn't partner with each other till the beginning of this year. Because of encountering a Waterloo at the previous hydraulic valve manufacturer, he turned the tables at AAK and regained his confidence. At the end of last year, Andy purchased a batch of hydraulic flow control valves from a hydraulic valve manufacturer. Because 20% of the shipments leaked, he encountered customer claims. The old hydraulic valve manufacturer was unwilling to bear the claim or re-produce. The customer kept pushing for replacement hurriedly. The owner asked him to find a high-quality hydraulic valve manufacturer to reproduce the goods for the customer. Andy had a big headache at that time. The replacement quantity is not big, the hydraulic valve manufacturers with exquisite quality were unwilling to produce the small quantity for him. The hydraulic valve manufacturers who were willing to produce this quantity, were not able to meet the customerâ??s requirement about the roughness of hydraulic flow control valve. He ran into a wall everywhere, which made Andy haggard. When Andy contacted with AAK HYDRAULIC VALVE, we are willing to cooperate with her to solve this difficult problem. We tested the leaked hydraulic flow control valve sample. The reason for the leakage is the roughness of the mounting surface of the hydraulic flow control valve. According to the customer's service conditions, this roughness must be controlled at 1.0 �¼ M or less. Andy is very confused why 80% of the installation surface roughness of hydraulic flow control valve is up to standard, while 20% is out of this range. The root of this fluctuation is the master's operation method, resulting in human error. The surface roughness is the depth, density, texture of the traces left on the machined surface from the action between the tool and the part surface, which depends on the master's processing technique. Andy is very clear that at present, most domestic hydraulic valve manufacturers generally control the roughness of the installation surface of hydraulic flow control valve at 0.8-1.0 �¼ m. The biggest problem is not stable enough. Andy also knows that only AAK controls the roughness value of hydraulic flow control valve within 0.8 �¼ M, which can completely avoid leakage outside the hydraulic flow control valve, because of rest assured, Andy decided to repeat the order with AAK HYDRAULIC VALVE.
Just yesterday, I received a repeat order from Andy for a hydraulic flow control valve, which is just 3 months away from the delivery time of the last batch of hydraulic valves. The American customer Andy, started to communicate with us in 2019. Maybe it was just not the right time, we still didn't partner with each other till the beginning of this year. Because of encountering a Waterloo at the previous hydraulic valve manufacturer, he turned the tables at AAK and regained his confidence. At the end of last year, Andy purchased a batch of hydraulic flow control valves from a hydraulic valve manufacturer. Because 20% of the shipments leaked, he encountered customer claims. The old hydraulic valve manufacturer was unwilling to bear the claim or re-produce. The customer kept pushing for replacement hurriedly. The owner asked him to find a high-quality hydraulic valve manufacturer to reproduce the goods for the customer. Andy had a big headache at that time. The replacement quantity is not big, the hydraulic valve manufacturers with exquisite quality were unwilling to produce the small quantity for him. The hydraulic valve manufacturers who were willing to produce this quantity, were not able to meet the customer's requirement about the roughness of the hydraulic flow control valve. He ran into a wall everywhere, which made Andy haggard. When Andy contacted with AAK HYDRAULIC VALVE, we are willing to cooperate with her to solve this difficult problem. We tested the leaked hydraulic flow control valve sample. The reason for the leakage is the roughness of the mounting surface of the hydraulic flow control valve. According to the customer's service conditions, this roughness must be controlled at 1.0 M or less. Andy is very confused why 80% of the installation surface roughness of hydraulic flow control valve is up to standard, while 20% is out of this range. The root of this fluctuation is the master's operation method, resulting in human error. The surface roughness is the depth, density, texture of the traces left on the machined surface from the action between the tool and the part surface, which depends on the master's processing technique. Andy is very clear that at present, most domestic hydraulic valve manufacturers generally control the roughness of the installation surface of hydraulic flow control valve at 0.8-1.0 m. The biggest problem is not stable enough. Andy also knows that only AAK controls the roughness value of hydraulic flow control valve within 0.8 M, which can completely avoid leakage outside the hydraulic flow control valve, because of rest assured, Andy decided to repeat the order with AAK HYDRAULIC VALVE.
A large part of China's railway bridges use simply supported T-shaped beams, and sidewalks are set up on both sides of the bridge deck for railway maintenance personnel to walk. The sidewalk adopts the form of steel bracket, which is composed of angle steel welding or splicing, and is fixed to the ballast retaining wall of the bridge deck by pre-embedded U-shaped bolts or pre-embedded T-shaped steel. Reinforced concrete sidewalk steps are laid on the bracket. The construction process is more complicated, and the later maintenance and repair work is heavy. The new sidewalk steel beams produced by Anyang Railway Equipment Co., Ltd. are mainly used for passenger and freight railroads with a speed of 160km/h and 200km/h, which can simplify construction, increase bearing capacity, and facilitate later maintenance. Steel beams in non-sound barrier areas: mainly composed of lower flange plates, webs, upper flange plates, railing column foundations, railing columns, studs, rubber pads, railing round bars, railing angles and bolts. Steel beams in the sound barrier areas: mainly composed of lower flange plates, webs, upper flange plates, sound barrier column foundations, railing columns, studs, and rubber pads. Steel Beam Production Processï¼? cutting---leveling---welding---shot blasting---Co-infiltration---cleaning---passivation ---sealing---packing Surface quality There should be no welding slag, spatter, burr, etc. on the surface; the technical requirements of the welding part should meet the design regulations. When there is no specific stipulation, the technical requirements of the welding part should meet the requirements of Appendix G in Q/CR9211, and the welding non-destructive test should be in accordance with JB/ T6061 stipulates to proceed. Anti-corrosion layer of steel beam Except for railing posts, railing angles, railing steel bars and bolts, the rest of the steel beams are treated with composite infiltration layer technology for anti-corrosion treatment (multi-element powder co-infiltration after welding + passivation without heavy metal element passivation + sealing treatment) . Anti-corrosion layer for sidewalk railings and bolts Sidewalk railing posts, railing angles and bolts are treated with multi-alloy co-infiltration for anticorrosion treatment, which meets the relevant regulations of TB/T3274. Rubber pad The rubber backing plate is made of EPDM rubber raw materials, and regenerated rubber is forbidden.
Resting Ecg, Pulmonary Function Testing, Rescue Devices For Professional And Lay Users, And Patient Monitoring.
Disposable glove, vinyl glove, nitrile glove and latex glove, non-woven products, hot & cold pack, ECG electrode, wheel chair.
Disposable adhesive cardiac electrode pads are medical devices used in electrocardiography (ECG) procedures to detect and record the electrical activity of the heart. Here's more information about these pads: Purpose: The primary purpose of disposable adhesive cardiac electrode pads is to securely attach ECG electrodes to the patient's skin, allowing for the acquisition of clear and accurate ECG signals. These pads serve as the interface between the patient's body and the ECG monitoring equipment. Design: Disposable adhesive cardiac electrode pads are typically made of soft, flexible material, such as foam or fabric, with an adhesive backing that adheres to the patient's skin. They are designed to be comfortable for the patient while ensuring reliable electrode contact and signal transmission. Electrode Placement: Disposable electrode pads are pre-gelled with conductive gel to ensure good electrical conductivity between the skin and the electrodes. They are usually pre-positioned on a backing material or individually packaged for easy application to specific locations on the patient's body, such as the chest, limbs, or torso. Adhesive Properties: The adhesive backing of the electrode pads is formulated to adhere securely to the skin without causing discomfort or irritation. It should provide strong adhesion throughout the duration of the ECG procedure, even during patient movement or perspiration. Compatibility: Disposable adhesive cardiac electrode pads are compatible with various types of ECG machines and monitoring equipment, including 3-lead, 5-lead, and 12-lead ECG systems. They are suitable for use in hospitals, clinics, ambulances, and other healthcare settings. Disposable: As indicated by their name, disposable adhesive cardiac electrode pads are intended for single-use only. After the ECG procedure is complete, the pads are removed from the patient's skin and discarded according to medical waste disposal protocols. Hygiene: Disposable electrode pads help maintain hygiene and reduce the risk of cross-contamination between patients. They should be stored in a clean and dry environment before use, and proper hand hygiene practices should be observed when applying and removing the pads.
Cotton Buds Squareandcylinderplasticboxavailable. Sterilepackavailable. Itemcode Description MDS-CB001 Plasticcottonbuds3",100pcs/drum MDS-CB002 Plasticcottonbuds3",200pcs/squarebox MDS-CB003 Plasticcottonbuds6",singletip,100pcs/bag MDS-CB004 Woodencottonbuds6",smallsingletip,100pcs/bag MDS-CB005 Woodencottonbuds6",mediumsingletip,100pcs/bag MDS-CB006 Woodencottonbuds6",largesingeltip,50pcs/bag
Push Button/Hand control; Coag and Cut buttons for surgical operation,match with Electrosurgical Unit; Removable stainless Steel Ultra-clean Blade Electrode; 3M cord/cable; 3 Pin plug for ValleyLab, Martin, Bowa, Berchtold and Erbe. EO Sterile; Features: Inside Hexagon Lock sealed desgin provides precision &reliability amd prevents leakage; Different plugs connectors for various electrosurgical generators; Precise and perfect desgin with anti-slip function; Tested with 8000V high voltage ensures trustworthy liability; ABS pencil appearance; Terms of sterility:Twoyears ; Package:1pcs/ Sterile Pack,50pcs/box,100pcs/ctn; 46*23*28cm; G.W/N.W: 8.0kgs/7.0kgs. Others:Resuable Electrosurgical pencil require high temperature and high pressure sterilization.
Examination Gloves Powder free or Pre-powder; Made of natural latex rubber, perfect combination of strength, elasticity; Slip resistance and comfort. Thicker, stronger and more elastic than most other gloves;Â Widely be used in medical examination and health care area,especially perform well in high-risk, heavy-duty situations. 100pcs/box, 10 boxes/ctn.
Electrosurgical Pad has good adhesive and conductive properties.All the materials pass ISO 9001 Biocompatible Test. It proves that our products are non-cytotoxic, without stimulus and sensitivity.Making surgical operation much more safety. It can reduce the pad size and fit for any direction operating. Applications: Match with various types of Electrosurgical Unit and Radio Frequency Unit. Product Character: 1).Foam  and Non-woven backing with air permeable sticker make adhesive more comfort 2).Monopolar and bipolar model,upright and horizontal shape. Packages: A type monopoly:2pcs/bag,50pcs/box,100pcs/ctn; B type monopoly:10pcs/bag,100pcs/box,200pcs/ctn. Features: 1.Suitable for Nurosurgery,Ophthalmology and Plastic surgery etc. 2.Smooth surface ,conductive,and accurate coagulation can reduce the generation of eschar. 3.Variety of shape and sizes satisfy different surgeries. 4.Disposable/Resuable are optional,resuable can be autoclaved repeatedly.
Product Type:blue isolation gowns knit cuff Material:SMS/PP/Spunlace Size:S/M/L/XL/XXL/3XL Color:White, blue, green, yellow, red...etc Weight:30-70grams Cuff style:With knitted cuffs, elastic cuffs or on your request Neck style:With ties, magic tape or on your request Waist style:With ties, magic tape or on your request Certificate:CE, FDA, ISO13485, ISO9001 Package:10PCS/bag , 10 bags/carton or 1pc/bag, 50pcs/carton Delivery:2-3 weeks after got your deposit. Samples:Free samples available.
Gauze Bandages, made of 100% cotton, are widely used for protecting wounds and preventing bleeding. They can come in any number of widths and lengths. Mainly used for surgical dressings nursing, trauma first aid, field training and so on Feature: Natural materials;no pollution; no impurities;independent packing;breathable . Thread Count per sq. Inch: 19X15,24 X 20, 26 X 18, 28 X 24, 30 X 20 Width: 1, 2, 3, 4 & 6 inch Length: 4, 5, 6, 10 yds Thread Count per sq. Inch: 32 X 38, 43 X 27 (B. P. ) Width: 5, 7, 10, 12, 15 & 20 cm; Length: 4, 5, 6, 10 m
MEDISEA Sterile lubricating Jelly is used in endoscopy,gastroscopy,colonoscopy & rectoscopy. Hypoallergenic, does not irritate skin.Water soluble ,can be cleaned easily with tissues or a towel. It spreads easily and adheres well to rubber material and synthetic surfaces.It will notharm surgical instruments, rubber, or plastic, and is safe to use on human tissues. Models: 3g/5g/57g/113g available. Features: Non-irritating, Non-staining, Non-greasy. Water soluable,bacteriostatic. Not made with natural rubber,latex free. Gamma sterilized meets AAM/ANS/ISO11137 standard. Purposes: MEDISEA Sterile Lubricating Jelly is intended for medical purposes to lubricate body orifices to facilitate entry of diagnostic or therapeutic devices.It can be used in insertion of Catheters, insertion of Speculum, rectal thermometers, enemas / douches, gynecological examinations, insertion of tampons,digital& instrument examinations, lubrication of condoms and general hospital procedures. Storage:Store in cool dry place Expiry date:Two years.
.Technical parameters: 1. product Size: (LxWxH):High position :190*x55x2300px Low position:190x55x625px 2. Maximum Angle of the Back:75° 3. Carton Size(1pc:195x62x637.5px) 4. N. W.:40kg  G.W.:46kg  5. Load Bearing:�159kg II. How to use: 1. The stretcher surface is made of soft sponge mattress, which make patient feel comfortable. One medical staff can push the trolley onto the ambulance or send to ward. 2. When need low position, pull out the safety handle & then press it, the stretcher's height will automatically lower down. 3. When destination arrived, pulling out the safety handle, the stretcher's legs will unfold automatically. 4.There are the return elastic lock device at both side of the stretcher & the leg parts. Lock tightly when turn up for patient safety, turn down for patients out. 5.Pressing the button under the stretcher, the head part will be raised or lowered. III. Applied for:Approved by clinic practice, this item is suitable for ambulance, hospital battlefield, gym, etc. to carry the wounded & patients. It also can be used in general operation. IV. Cautions: 1. When carrying patients with this stretcher, be sure lock tightly the fender locking device & fasten the safety belt for safety sake. 2. in general operation, be careful not to out torn the stretcher surface. V. Maintenance: 1. Keep clean as routine (incl. sterilization);2. Often check if any parts loose or not. VI. Storage & transportation: 1. Store this product in the place of damp proof & non-corrosion;2. Common transporting vehicle can carry this product.
Material: PP, PP+PE coated, PE, CPE, PVC, SMS Colours: White, Blue, Olive, Green,Gray Shoe Cover Material: PP 40g/sqm; Size: 18X41cm; Color: White / color Non-slippery Shoe Cover Material: PP 40g/sqm; Size: 17X41cm; Color: White / blue Boot Cover Material: PP 40g/sqm; Size: 38X48cm; Color: Blue / olive / green PE coated Shoe Cover Material: PP + PE coated; Size: 17X38cm; Color: White / green PE Shoe Cover Material: PE; Size: 15X41cm; Color: White / blue CPE Shoe Cover Material: CPE; Size: 15X41cm; Color: White / blue/gray PVC Shoe Cover Material: PVC; Size: 15X41cm; Color: White / blue SMS Shoe Cover Material: SMS; Size: 17X41cm; Color: Blue / white. Other sizes available.
Test tube Code Description MDS-TT001 15X100mm MDS-TT002 13X100mm MDS-TT003 13X78mm MDS-TT004 12X60mm MDS-TT005 12X75mm MDS-TT006 12X78mm MDS-TT007 16X53mm with cover MDS-TT008 14X41MM with cover MDS-TT009 5ml graduated tube with cover MDS-TT010 2ml hemopexis tube with cover MDS-TT011 2ml hemopexis tube tube MDS-TT012 BD tube MDS-TT013 Six edges tube MDS-TT014 MLA-E-750tube MDS-TT015 5ml conical tube MDS-TT016 12ml conical tube with cover MDS-TT017 urine tube MDS-TT018 olympus AU tube MDS-TT019 olympus AU cup MDS-TT020 Holland weituson tube MDS-TT021 12X75m PP tube MDS-TT022 13X1000mm swab tube MDS-TT023 12X75mm swab tube
