DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature. ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning. MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc CATEGORY: ABS TYPE: Regrind SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt Origin: Bangladesh LOADING WEIGHT: 26 Ton FOB (USD/Ton): 750$ - 950$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
We are a leading manufacturer of Jaggery and Jaggery Powder, Jaggery Granules, Jaggery Powder 30 Micron Free Flow moisture less than 1.5% Jaggery Powder containing no chemical additive and made from organic certified sugar cane. This golden-brown delicacy is highly nutritious, delicious and a healthier alternative to processed sugar and artificial sweeteners. It naturally contains iron, vitamins, and minerals and enhances the taste of tea, coffee, and other beverages. USAGE: BAKERY( BAKING) , COOKING, TEA, COFFEE, SYRUP ETC Though jaggery is available in multiple forms like syrup, balls, block and more, powdered jaggery is quite popular due to the ease of usage. You can easily add jaggery powder to your cup of tea, in Indian sweets and more to enhance the flavour in no time. Jaggery Powder acts as a natural sweetener and provides energy over an extended period of time. It helps to regulate your digestive system, That�¢??s why many people prefer eating jaggery after a meal. Jaggery powder is made from evaporated organic sugar cane juice and it does not contain any chemical, calcium lime is added which is permitted under organic guidelines. Natural, traditional sweetener made by concentrating sugarcane juice and is known all over the world by different local names
Moisture: 13 % Ash: 0,54 % Raw Gluten: 30 % min Falling number: 280 - 300 sec Water Absorbtion: 63 % Peak: 5-6 min Relaxation: 5 mm Protein 100g: 11 g Acidity: 1,8 Feature: High nutritional value Premium quality Long shelf life very low in fat Natural taste and hygiene Rich taste Unadulterated Available in different size of packaging Free from impurities Uses: As a Cereal with milk and sugar, Breads cookies cakes crackers macaroni
Moisture: 13 % Ash: 0,54 % Raw Gluten: 30 % min Falling number: 280 - 300 sec Water Absorbtion: 63 % Peak: 5-6 min Relaxation: 5 mm Protein 100g: 11 g Acidity: 1,8 Feature: High nutritional value Premium quality Long shelf life very low in fat Natural taste and hygiene Rich taste Unadulterated Available in different size of packaging Free from impurities Uses: As a Cereal with milk and sugar, Breads cookies cakes crackers macaroni
- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper
- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Plese study Neutrized Gypsum from KOrea PH 9% MIN. FREE MOISTURE (wt%): 15% MAX. Combined H2O :19% MIN. CaO : 30% MIN. SO3 : 40% MIN. Cl(wt%) :0.01% MAX. CaSO4ã?»2H2O : 90% MIN. TOTAL P2O5(wt%) :1.0% MAX. W/S P2O5(wt%) : 0.05% MAX. SIZE(0~50mm) : 100% INSOLUBLE RESIDUE : 4% MAX.
Categories Others Qty in 20' FCL 20000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E500 CAS No. 299-29-6 HS Code 291816 Specification FCC/USP Ferrous Gluconate, E579, CAS No.299-29-6, is an iron salt of gluconic acid manufactured through chemical synthesis, as iron nutrition enhancer that appears as a yellow to gray or light green color, in the form of powder or granules. Ferrous Gluconate is used as supplement in cereal products, dairy products, infant food, beverages, and black olives. As an experienced Ferrous Gluconate manufacturer and supplier, we has been supplying and exporting Ferrous Gluconate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Sodium Hexametaphosphate, E452i, CAS no.10124-56-8, manufacturing process via chemcial heating, monosodium orthophosphate as raw material. Sodium Hexametaphosphate appears as a white powder. Applications for Sodium Hexametaphosphate include in cheese powders and dips, breakfast cereals, beer and bottled beverages, imitation cheese, frozen dessert, packaged eggs and artificial maple syrup. As an experienced Sodium Hexametaphosphate manufacturer and supplier, we has been supplying and exporting Sodium Hexametaphosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Hexametaphosphate food grade Specification ITEM STANDARD APPEARANCE WHITE POWDER OR WHITE GRANULES TOTAL PHOSPHATE (As P2O5) 68.0% MIN INACTIVE PHOSPHATE(As P2O5) 7.5% MAX WATER INSOLUBLE MATTER 0.02% MAX PH VALUE 5.8-6.5 IRON as Fe 200PPM MAX THROUGH MESH 60 90% MIN ARSENIC( As) 3PPM MAX TOTAL HEAVY METALS( Pb) 10PPM MAX FLUORID 30PPM MAX LEAD 4PPM MAX
Ferrous Lactate, E585, CAS no.5905-52-2, is a ferrous salt of lactic acid manufactured process through neutralizing lactic acid. Ferrous Lactate is widely used as acidity regulator in food, beverage, dairy product, powder drinks, baby food and bakery. As an experienced Ferrous Lactate manufacturer and supplier, we has been supplying and exporting Ferrous Lactate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Preservatives Qty in 20 FCL 20000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E585 CAS No. 5905-52-2 HS Code 291811 Specification FCC/USP Ferrous Lactate Food grade Specification Ferrous lactate 96% .Min Loss on drying 20% .Max Chloride(CI) 0.1% .Max Iron (Fe 3+ ) 0.6% .Max Sulphate(SO 4 ) 0.1% .Max PH 5-6 Lead 1 ppm.Max Arsenic 3 ppm.Max
Lactic Acid Liquid, E270, CAS no.50-21-5, Chemical Formula C3H6O3, is a carboxylic acid manufacturing process through fermentation from corn starch. The lactic acid is a yellowish to colorless liquid, property having a mild acid odor and taste. Many bacterial species produce lactic acid, with Lactobacillus, Bifidobacterium, Streptococcus, Pediococcus and Leuconostoc. Lactic acid used as acid ingredient in sour dairy products, fermented fruits and vegetables and in sausages. As an experienced Lactic Acid Liquid manufacturer and supplier, we has been supplying and exporting Lactic Acid Liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Lactic Acid Specification Lactic acid food grade specification ITEM STANDARD APPEARANCE YELLOWISH LIQUID ASSAY 80% MIN HEAVY METALS(AS Pb) 0.001% MAX IRON 0.001% MAX ARSENIC 0.0003% MAX CHLORIDE 0.2% MAX SULPHATED ASH 0.1% MAX RESIDUE ON IGNITION 0.1% MAX SUGAR PASS TEST Lactic acid Pharma Grade specification ITEM STANDARD Content % 85-90 chloride % 0.002 sulphate % 0.01 iron % 0.001 residualon ignition 0.1 heavy metal % 0.001 arsenate % 0.0001 free carbonizing % no brown color at interface reducing sugar % no red sediment
Sodium Lactate, E325, CAS no.72-17-3, is a sodium salt of lactic acid manufactured process through neutralizing lactic acid, available as Clear, colorless, slightly syrupy liquid. Sodium Lactate is widely used as acidity regulator in meat products like roast pork, ham, sandwich, sausage, chicken products and cooked products. As an experienced Sodium Lactate manufacturer and supplier, we has been supplying and exporting Sodium Lactate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Lactate Food grade Specification ITEM STANDARD Assay 76% 84% Fresh color Max 100apha Putity %L+ Min 95 Sulphated ash Max 0.1% Chloride Max 0.2% Sulphate Max 0.25% Iron Max 10 mg/kg Arsenic Max 3 mg/kg Lead Max 5 mg/kg Mercury Max 1 mg/kg Heavy Metals (as Pb) Max 10 mg/kg
L-Tyrosine powder, CAS No.60-18-4, non-essential amino acid manufactured by extraction from vegetable protein. Do not use materials of animal origin in L-Tyrosine manufacturing process. L-tyrosine is an important factor in regulating mood. L-tyrosine deficiency can lead to poor mood, low blood pressure and low body temperature and associates with Restless Leg Syndrome. Tyrosine can be used in sports nutrition drink, skin care cosmetics and health foods. As an experienced L-Tyrosine manufacturer and supplier, we has been supplying and exporting L-Tyrosine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Tyrosine Food grade Specification Name L-Tyrosine Chemical Formula C9H11NO3 Appearance Cristal blanco o polvo cristalino Assay 99.0 100.5% Transmittance Clear, colorless, 95% min Loss on drying 0.20% max Residue on ignition 0.10% max Other ammoniated Meet with the requirements Chloride 0.020% max Sulfate 0.020% max Ammonium 0.020% max PH 5.0 â?? 6.5 Specific rotation -11.3 -12.1 Heavy metals 0.0010% max Arsenic 0.0001% max Iron(Fe) 0.0010% max
L-Cysteine, E920, CAS No.52-90-4, a non-essential amino acid manufactured through fermentation. Cysteine is extracted from raw materials of animal and human origins. Cysteine has the same structure as serine, but with one of its oxygen atoms replaced by sulfur. As an experienced L-Cysteine manufacturer and supplier, we has been supplying and exporting L-Cysteine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Amino Acids Qty in 20â??FCL 12000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E920 CAS No. 52-90-4 HS Code 293090 Specification FCC/USP L-Cysteine Specification Item Specifications (AJI97 ) Appearance White crystal or crystalline powder; tasteless Assay, % 98.5~101.0 Specific rotation -218~ -224 Loss on drying, % 0.2 Transmittance, % 98.0 Chloride (as Cl), % 0.02 Sulfate (as SO4), % 0.02 Ammonium as (as NH4), % 0.02 Iron (as Fe), % .001 Heavy Metals (as Pb), % 0.001 Arsenic (as As), % 0.0001 pH Value 5.0~6.5 Residue on ignition, % 0.1 Other amino acid Conforms
