KINDLY CHECK OUR OTHER POSTS FOR TTT and DIP & PAY JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT TANK-TO-VESSELS PROCEDURE AGREEMENT (TTV) 1. Buyer issues ICPO containing the seller's procedure with banking details and scanned copy of buyer's passport along with Charter Party Agreement (CPA) from buyer's Logistic Company. 2. Seller issues Commercial Invoice (Cl) for the available products in Tank at the Port, for Buyer's review and endorsement and return within 3 international working days 3. Seller issue to buyer Tank-To-Vessel Injection Agreement (TTVIA) to be endorsed by both Seller, Buyer and Buyer's shipping Company . 4. Seller issue injection schedule to sign and seal from buyer's Logistics Shipping Company and Seller commence injection of the product. 5. Upon confirmation of Sign and seal Injection schedule from buyer's logistics company with (ATV Letter). Seller release the below POP documents directly to end buyer's secure email. a) Fresh SGS (Not Older Than 48 hrs.) b) Legalized Commercial Invoice. c) Commitment to Supply. d) Injectio n Report e) ATS -Authorization to Sell & Collect f) Authorization to Verify (ATV) g)Dip Test Authorization (OTA) h) Export License. j)Statement of product Availability j) Tank Storage Receipt (TSR) With barcode and GPS Coordinate k) NCNDA/IMFPA 6. The Buyer Conducts Dip Test in the product in the seller's reservoir. 7. Buyer provide Authorization to Inject (ATI) from buyer Logistic Company to enable seller commence Injection of Product into the Buyer's Vessel Tank 8. Within Twenty-Four (24) Hours upon completion of the Injection, buyer make payment for the total cost of the product injected into buyer's Vessel by TT wire transfer to seller's nominated bank account. 9. Buyer lifts products and all intermediaries are paid, Seller and Buyer consider and signs further contracts after successful Transaction Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2
KINDLY CHECK OUR OTHER POSTS FOR DIP PAY and TTV JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT TANK TO TANK-STANDARD PROCEDURE AGREEMENT (TTT) 1. Buyer confirms Soft Offer and issues an official Irrevocable Corporate Purchase Order (ICPO) along with company registration and Valid Passport Copy. CIS on buyer's company letterhead along with TANK STORAGE AGREEMENT (TSA) 2. Seller issues commercial invoice of products in tank at port, buyer signs and returns commercial invoice with acceptance letter stating to adhere to seller procedure 3. Seller provides buyer with the below listed PPOP: A. Tank to Tank Injection agreement (TTIA) B. Product Passport (product analysis report) C. Irrevocable Commitment Letter to Supplier D. Statement of Product Availability 4. Buyer returns signed Tank to Tank Injection agreement (TTIA) with ATV to verify from buyer's Tank Farm which means buyer has storage facilities in favor of buyer to receive product 5. Seller issues injection schedule to sign and seal from buyer Tank Farm and Seller commence injection of the product into buyer's tank. 6. The seller issues the following POP documents to the buyer; the buyer performs a Dip test on the product if needed and makes payment for the total value of the product injected into the tank via MT103 -TT: (a) SGS report for quality and quantity at shore tank not older than 48 hours (b) Product Certificate of Origin (c) Tank storage receipt with full GPS coordinates (d) Unconditional Dip Test authorization letter (e) Authorization to sell and collect (f) NCNDA-IMFPA agreement (g) Q&A (i) Company Registration Certificate 7. (NCNDA/IMFPA) will be signed, within 24 hours of giving POP document 8. Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 9. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2
KINDLY CHECK OUR OTHER POSTS FOR TTT and TTV JET A1 and EN590 IN Fujairah, Rotterdam, Jurong, Bukon, Klang and Houston EN590 available in the following ports: Fujairah: 400,000MT Rotterdam: 600,000MT Jurong: 800,000MT Bukon: 200,000MT Klang: 500,000MT Houston: 700,000MT DIP & PAY PROCEDURE FOB ROTTERDAM, HOUSTON , JURONG , BUKOM , BUSAN, USLAN ZHOUSHAN, QINGDAO/ KLANG, MALINA, AL FUJAIRAH, DOHA, RAS LAFFAN, KAOHSIUNG . NAGOYA.WITH SGS REPORT. NON-NEGOTIABLE 1The Buyer Issue an ICPO, containing the seller's working procedures and Buyers Banking details, along with TSA (TANK STORAGE AGREEMENT) , Buyer Certificate of Incorporation, Company Profile (CP) and International Passport Copy. 2. Seller issues ICC Warning Letter and Commercial Invoice of products in tank at port. Buyer signs and returns commercial invoice with acceptance letter stating to adhere to Seller procedure. 3. The Seller visits Buyer Tank Farm Office with a copy of the SGS Report and shows SGS report strictly to the Buyer's Tank Farm Company only to verify the SGS Report Quality and Quantity with SGS office. 4. After confirmation of successful verification of SGS Report only by Buyer's Tank Farm Company, the Seller pays Buyer's Tank for the first 3 days and the Buyer pays his Tank Company for 3 Days after his Tank Company receives payment from the Seller Company. 5. Buyer Tank Farm provides 6 days TSR. 6. Seller sends injection schedule and Buyer returns signed and sealed Injection Schedule. 7. Seller commences injection of the product to Buyer Tank and completes the injection. 8. The Seller issues the following POP documents to the Buyer; the Buyer performs a Dip Test on the product if needed and makes payment for the total value of the product injected into the tank via MT103/TT: (a) SGS report for quality and quantity at shore tank not older than 48 hours (b) Tank storage receipt with full GPS coordinates (c) Product Certificate of Origin (d) Product injection report at shore tank (e) Unconditional dip test authorization letter (f) NCNDA-IMFPA agreement (g) Q&A (h) Authorization to sell and collect 9.Seller sends payment to all intermediaries involved in the transaction 24 hours after receiving confirmation of Buyer Payment as per signed & sealed NCNDA/IMFPA which is notarized by Public Notary in Kazakhstan and Authorized by Seller's Bank and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement between the buyer and seller. Current Prices and commissions: EN590 A) FOB DIP PAY (TTT) USD530MT B) FOB (TTT_TTV) USD510MT JET FUEL A1 A) FOB (TTT_TTV) USD70 B) FOB DIP PAY (TTT) USD80 BUYER SIDE COMMISSIONS: EN590 DIP PAY (TTT) USD15 TTT/TTV: USD20 JET A1: TTT/TTV: USD2 DIP PAY(TTT) USD2
Fuel Offer: Jet A1 and EN590, FOB Houston, Rotterdam, Fujairah, Singapore Commodity: Aviation Turbine Fuel Jet A1 Origin: Non-Sanctioned / Kazakhstan Specification: International Standards Quantity: 2,000,000 BBL â?? Trial (tranches to be confirmed by Buyer), 6,000,000 BBL â?? 12-month contract + R&E where available Inspection: Sellers Fresh SGS < 48 hours old Price: Houston 6/4, Rotterdam 8/6, Fujairah 8/6, Singapore 6/4, off market price per barrel Commodity: EN590 10PPM Ultra Low Sulfur Diesel Origin: Non-Sanctioned / Kazakhstan Specification: International Standards Quantity: 200,000 Metric ton â?? Trial, 400,000 Metric ton â?? 12-month contract + R&E where available Inspection: Sellers Fresh SGS < 48 hours old Price: Houston 10%, Rotterdam 15%, Fujairah 15%, Singapore 10%, off market price per metric ton Important Notes: Settlement Currency: United States Dollar (USD) Only Payment Format: Trial - MT103 Swift / TT Contract: MT103 Swift / TT (Rolling SBLC on request) Delivery: FOB Houston, Rotterdam, Fujairah, Singapore Tank to Tank Injection All duties and excise are the responsibility of the Buyer. Buyers without suitable banking facilities must adhere to pro-forma invoice processes. We can supply SLCO Saudi Light Crude Oil as soon as the Buyer issue LOl/ICPO according to the Procedure. This is the most important thing. 1 can push the Seller to give $4.00 Discount maximum to the Buyer. EN590 10 PPM can be arranged FOB Fujairah, UAE only with Price minus $40 AG Platts with any Quantity. I am direct with both Products as long as the Buyer is serious. Pls. ask the Buyer if Buyer fully accepts SCO for SLCO Saudi Light Crude Oil. 7:33 What's your best price on ESPO I work with three refineries in Russia $29 Gross/$27 Net per BBL
JET A1 FUEL Maximum Quantity: 2,000,000 Barrels per Month CIF Price: Gross USD $88.00BBL NET/ USD $86.00 NET on CIF FOB Price: Gross USD $ 86.00BBL NET / USD $84.00 NET on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Item: Fuel injection pump 612600081227 Model No: 612600081227 Condition:New Material: SteelPackage Details: Carton Packing Stock: In Stock Brand: CNDIP Warranty: 6 months Welcome to contact:
1100 volts grade, LT Cable, multiple core, Cross linked Polyethylene (XLPE) insulated, PVC sheathed, Armoured power cables.
Cable Standard BS 6500 & IS 694:2010, IEC 60227 Silent Features - High flexibility - Excellent resistant to moisture, abrasion, grease, oil - Long Life - Excellent mechanical & electrical properties Technical Data Working Temp : Max.+70�°C Nominal Voltage : 1.1 KV Test Voltage : 3.0 KV Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200, 300 , 500, 1000m Conductor Flexible Bare Bunch Copper as per IS:8130 Insulation PVC As Per IS:5831 Inner Sheath PVC Outer Sheath PVC As Per IS:5831 Core Color As per IEC 60227 3C -Blue, Brown, Black or Yellow/ Green, 4C -Blue, Brown, Black, Grey or Yellow/Green As per IS 694 : 2010 - 3C - Red, Yellow and Blue 4C - Red, Yellow, Blue and Green Application Ideal For Irrigation Pumps, Drinking Water Supply Pumps, Submersible Pump Motor Power Supply.
Cable Standard DIN VDE 0282 PART 810, IEC 245 & BS 6007, BS 6899 Silent Features - Temperature range -40�° to +90�° - Excellent Impact Resistant - Excellent Weather Resistant Technical Data Operating Temp : Temp. range -40 to +90 Nominal Voltage : 1.1 KV Test Voltage : 2.5 KV Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200,300, 500, 1000m Conductor Flexible Bare Bunch Copper as per IS:8130, IEC 60228 Insulation EPR Rubber as per IS:6380, VDE 0282 (Part-1) Inner Sheath NBR/TPR Rubber as per IS:6380, VDE 0282 (Part-1) Outer Sheath : NBR/TPR Rubber as per IS:6380, VDE 0282 (Part-1) Core Color As per IEC 60227 3C - Blue, Brown, Black or Yellow/ green, 4C - Blue, Brown, Black, Grey or Yellow/green As per IS 694 : 2010 -3C - Red, Yellow and Blue 4C - Red, Yellow, Blue and Green Application Ideal For Irrigation Pumps, Drinking Water Supply Pumps & Submersible Motor Power Supply.
Cable Standard According to DIN 72551-6 & ISO 6722 B JIS C 3406, JASO D 611/608, IS 2465, BS 6862 : PART 1 Cable Features - Excellent flexibility - The NESKEB Auto cables is impervious to water, petrol, diesel, acids, engine and lubricating oils and grease resistant - High mechanical strength - Excellent flame retardant properties - Excellent mechanical & electrical properties Standard Packing Coils 100, 200, 500 and 1000m Conductor Flexible Bare Copper Wire Insulation Pvc Insulation Cables Type FLRY-A and FLRY-B Color Blue, Black, Brown, Grey, Orange, Pink, Red, Violet, White, Green, Yellow, Yellow / Green, Lining Strip Color Also and as per Customer Requirement Temperature 20�?�°c to 105�?�°c Application These cables are used as original equipment's for wiring automobiles and in the auto harnesses
Cable Standard SAE J1127 VDE 0295, IEC 60228, IS 2465, BS 6862 Cable Features - Excellent flexibility - The NESKEB Auto cables is impervious to water, petrol, diesel, acids, engine and lubricating oils and grease resistant - High mechanical strength - Excellent flame retardant properties - Excellent mechanical & electrical properties - Special heat resistant insulation - Minimum bending radius Standard Packing Coils 25, 50, 100, 200 And 500m. Conductor Flexible Battery Cables: Flexible bare copper class 5 conductors to IEC 60228 Extra Flexible Battery Cables: Flexible bare copper class 6 conductors to IEC 60228 Insulation Flexible Battery Cables: HR PVC Extra Flexible Battery Cables: HOFR(TPR Rubber) Separator Polyester tape over conductor for HOFR insulated extra flexible battery cables Color : Red, Black Application These wires used low voltage circuit in automobiles such a Vehicles and Motor cycles. Where high flexibility is required.
Cable Features - Special heat resistant insulation - Higher current carrying capacity. - Fine copper wires - Highly thermal stable insulation - Excellent resistant to moisture, abrasion, grace, oil - Long Life - Excellent mechanical & electrical properties Cable Standard IS : 694 : 2010 & BS 6004, BS EN 50525-2-31 Application Fixed installation in conduits and under plaster, for appliance wiring and distribution stations. Standard Packing Coils 90 and 180m Conductor Flexible Bare Copper conductor class-2 and class-5 as per IS: 8130 EN 60228 Insulation HR/FR/FRLS-H/ZHFR Insulation compound with a high insulation resistance value as per IS:5831 Color Red, Yellow/green, Blue, Black, Brown, Grey, Orange, White, Green, Yellow Properties PVC Self-extinguishing and flame retardant according to EN 60332-1-2
Cable Standard Generally conforms to IS 694:2010, IEC60228, BS 6004 Silent Features - Special heat resistant insulation - Higher current carrying capacity - Fine copper wires - Highly thermal stable insulation - High electrical conductivity - Long Life - Excellent mechanical & electrical properties Technical Data Operating Temp : -10�?�°C to max.+90�?�°C Nominal voltage : 1.1 KV Test voltage : 3.0 KV Standard Packing Coils 100, 200, 500 and 1000m. Conductor Bare Copper class1 or class-2 as per IS:8130, IEC 60228 Insulation PVC FR, FRLS,HRFR,ZHFR as per IS:5831-1984 Color Black, Green, Yellow/green or as per customer requirement Application Neskeb - Earth : Installation in surface mounted or embedded conduits, or similar closed systems
Cable Standard Generally conforms to DIN VDE 0281-5&2, BS:6500, EN-50525-2-11, IEC 60227-5 Cable Features - Special heat resistant insulation - High current carrying capacity - Less heat energy radiation - Longer life - High compatibility of cores - Excellent resistance to moisture, abrasion, grace, oil - Excellent mechanical & electrical properties - Insulation is highly thermal stable - Harmonized acc. to European standards Technical Data Working Temp : -5C to 70C Operating Temp : 20c to +80C Nominal Voltage : 300/500 V Test Voltage : 2000V Min. Bending Radius : 6x Cable Diameter Standard Packing Coils 100, 200, 500 and 1000m Conductor Annealed flexible bare Copper (Class 5 - Flexible Plain Copper) according to VDE 0295 IEC 60228. Insulation PVC T12 to according to EN 50363-3, BS 7655 Sheath PVC TM2.to according to EN 50363-3, BS 7655 Color White, Black, Blue or as per customer order Core Identification 2 Core - Blue & Brown 3 Core - Yellow/green, Blue, Brown 4 Core - Yellow/green, Blue, Brown, Black or Yellow/green, Brown, Black, Grey 5 Core - Yellow/green, Blue, Brown, Black and Grey Application H05VV-F cordage is a flexible PVC insulated, PVC jacketed harmonized cord recommended for use in electronic and electrical equipment such as office.
Silent Features (FR and FRLS) - Good Flame Retardant Properties - Excellent resistant to moisture, abrasion, grace, oil - Long Life - Excellent mechanical & electrical properties - Steam and boiling water resistant Silent Features (ZHFR) - Zero Halogen acid gas Evolution - Non-corrosive and non-toxic insulation - High-temperature resistant insulation - Better Flame retardant property - Excellent resistance to moisture, abrasion, grace, oil - Long Life Technical Data Operating Temp : -10Cto max.+90C Nominal voltage : 1.1 KV Test voltage : 3.0 KV Flame propagation : Flame retardant test as per IS 10810-58,64, IEC 60332-1 Standard Packing Coils 90m, 180m and 360m Conductor Annealed flexible bare Copper class-2 and class-5 Conductor as per IS:8130-1984 Insulation PVC FR, FRLS,HRFR,ZHFR as per IS:5831-1984 Color Red, yellow, Blue, Black, Brown, Grey, Orange, White, Green, Yellow/green or as per customer requirement Application Fixed installation in conduits and under plaster, for appliance wiring & distribution stations. Fixed Wiring in Conduits & Building wire Application
Cable Standard IS 694:2010, BS 6500 Silent Features - High Flexibility - Excellent resistant to moisture, abrasion, grace, oil - Long Life - Excellent mechanical & electrical properties Technical Data Working Temp : Max.+70�°C Nominal Voltage : 1.1 KV Test Voltage : 3.0 KV Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200, 300 , 500, 1000m. Conductor Flexible Bare or Tinned Bunch Copper as per IS:8130-1984 Insulation PVC as per IS:5831-1984 Sheath PVC as per IS:5831-1984 Core Color As per IS 694 : 2010 2 Core â?? Red & Black 3 Core â?? Red, Black, Green or Red, Yellow and Blue 4 Core - Red, Yellow, Blue and Green or Black Application Ideal For industrial induction motor, power tools, electrical machinery etc.
Cable Standard Generally conforms to EN-50525-2-21, DIN VDE 0282 part 810,IEC 245 Cable Features - Special heat resistant insulation - High current carrying capacity - Less heat energy radiation - Longer life - High compatibility of cores - Excellent resistant to moisture, abrasion, grace, oil - Excellent mechanical & electrical properties - Insulation is highly thermal stable - Harmonized acc. to European standards Technical Data Working Temp : -25�?�°C to 70�?�°C Operating Temp : -20�?�°C to max. +90�?�°C Nominal Voltage : 450/750 V Test Voltage : 2500V Min. Bending Radius : 6 x cable Diameter Flame propagation : Flame retardant test as per IEC 60332-1-2 Standard Packing Coils 100, 200,500 and 1000m Conductor Flexible bare Class 5 copper conductor according to DIN VDE 0295,IEC 60228 Insulation Rubber Type El-4 to VDE 0282 Part-1 Sheath Neoprene Jacket Rubber Type EM-2 Color White, Black, Blue or as per customer order Core Identification 1 Core - Black 2 Core - Blue & Brown 3 Core - Yellow/green, Blue, Brown 4 Core - Yellow/green, Blue, Brown, Black or Yellow/Green, Brown, Black, Grey 5 Core - Yellow/Green, Blue, Brown, Black and Grey Application H07RN-F rubber insulated and sheathed cables are intended for flexible connection to electrical equipment. They are suitable for both indoor and outdoor use in industrial and agricultural plant and on construction sites
Cable Standard IS 694:2010, BS 6500, IEC 60227 Silent Features - Excellent flexibility - Excellent resistant to moisture, abrasion, grease, oil - Long Life - Excellent mechanical & electrical properties Technical Data Working Temp : Max.+70�°C Nominal Voltage : 1.1 KV Test Voltage : 3.0 KV Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200,300, 500, 1000m Conductor Flexible Bare Bunch Copper as per IS:8130 Insulation PVC As Per IS:5831 Outer Sheath PVC As Per IS:5831 Core Color As per IS: 694:2010 â?? 3C - Red, Yellow, Blue, 4C - Red, Yellow, Blue, Black As per IEC:60227 - 3C - Black, Blue, Brown. 4C - Black, Blue, Brown, Green or Yellow/Green Application Ideal For Irrigation Pumps, Drinking Water Supply Pumps, Submersible Pump Motor Power Supply
Cable Standard DIN VDE 0282 part 810, IEC 245 & BS 6007, BS 6899 Silent Features - Temperature range -40�° to +90�° - Exceptional long term performance - Excellent Impact Resistant - Excellent Weather Resistant Technical Data Operating Temp : -20�°c to Max.+90�°C Nominal Voltage : 1.1 KV Test Voltage : 3.0 KV Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200,300, 500, 1000m Conductor Flexible Bare Bunch Copper as per IS:8130, IEC 60228 Insulation EPR Rubber Outer Sheath EPR Rubber Core Color 3C - Red, Yellow, Blue, Or Black, Blue, Brown 4C- Red, Yellow, Blue, Black Or Black, Blue, Brown, Green or Yellow/Green Application Ideal For Irrigation Pumps, Drinking Water Supply Pumps, Submersible Pump Motor Power Supply.
Cable Standard Generally conforms to, Based on IS:9857-1990 VDE 0282, IEC 245-6, BS 6899 Silent Features - Ultra high performance flexible welding lead, double insulated for longer life and added safety - Better flame retardant properties - Outstanding toughness & durability - High resistance to cuts, tears & abrasion - Resistance to oil, solvents and chemicals - Excellent ozone and weather resistant Technical Data Fixed Installation : -20C to max.+90C Nominal Voltage : 600 V Spark Test : 3.5 KV(ac) Color : Orange / Black Jacket Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200, 300 and 500m Conductor High conductivity, bare annealed copper flexible conductor, EC copper class 5 & class 6 generally conforms to IS:8130-1984, IEC 60228 Separation Polyester tape Insulation Double Insulated/single insulated flexible Nitrile rubber HOFR insulated as per IS:6380-1984 Color Orange / Black Jacket Current Rating The maximum current ratings of flexible welding cables for different duly cycles are based on an ambient air temperature of 25 C and a maximum conductor temperature of 90 C. The percentage duly cycles for various processes and applications are as follows: - Automobile Welding : up to 100% - Semi Automatic Welding : 30% to 85% - Manual Welding : 0% to 60% - Very intermittent or Occasional Welding : up to 20% Voltage Drop When total cable lengths in excess of 15mtr., are involved, it may be necessary to use cables of larger cross section to ensure that the voltage drop is not excessive & welding currents are maintained at adequate levels. Application Designed for the secondary (high current) connection to automatic or hand - held metal arc welding electrodes. It is suitable for flexible use under rugged conditions, on assembly lines & conveyor systems, in machine tool and automatically operated line & spot welding machines
