Features 1. Integrated design, lightweight and compact structure. 2.The vacuum molded polycrystalline mullite fiber furnace is high efficiency heat insulation, special alloy heating wires provide three-sided heating to ensure the best temperature uniformity. 3.Parallel side open door, so that the hot end away from the operation. 4. Once open the door, the power will be shut off. The power supplied time will be extended. Ensure the safety. 5. Double shell air heat insulation, low surface temperature. 6. Exhaust device, conducive to be ashing. 7. High-precision microcomputer control instrument and precision sensor are perfect combined, accurate temperature. 8. The special function keys to achieve temperature setting. 9.Auxiliary menu, realize over-temperature alarm, deviation correction, menu locking, over-temperature prevention device. Security Over-temperature alarm, menu locking, over-temperature prevention, open door power shut off, power supplied time extended.
1.The applications of XYX-130 wheeled drilling rig Field irrigation well, civil uses water well and so on; geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes. 2.The features of XYX-130 wheeled drilling rig ¬The rig is equipped with a wheeled walking mechanism, which is convenient for the whole machine to move ¬With oil pressure feeding mechanism to improve drilling efficiency. ¬The drill rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient and safe and reliable. ¬Pressure gauges with hole bottom indicate pressure, so as to facilitate the control of the situation in the hole. 3.The specifications of XYX-130 wheeled drilling rig XYX-130 wheeled drilling rig Drilling depth 130m Maximum open hole diameter 220mm End hole diameter 75mm Drilling pipe diameter 50mm Drilling angle 90°-7 Drill rig weight 950kg Vertical Spindle Spindle rotating speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Maximum lifting speed of single rope 0.41/ 0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Drum capacity 27m Mud pump Model Horizontal single cylinder double action Displacement (diesel and electric engine, respectively) 95/77 l/min Maximum pressure 1.2mpa Working pressure 0.7mpa Water inlet pipe diameter 30mm Water outlet pipe diameter 20mm Triangular belt diameter B1575mm
1. Model name: 401 tinplate easy open end 2. Inside coating:organosol laquer, aluminize lacquer, epoxy phenolic. 3. Outside color:gold.Sliver. 4. Carton size: 46*30*23cm. 5. Metal: aluminum 6. Sample : free 7. Custom order: accept 8. Coating : in line with client's requirements 9. Feature : easy to tear, safety for hand, non spil 10. Pcs/20'gp:900000pcs 11. Thickness:0.20-0.22mm 12. Outside diameter mm:108.95±0.20 13. Curl height mm:2.00±0.20 14. Seaming compound weigh:83±10 15. Compressive strength psi:=170 16. Countersink depth mm:4.75±0.15 17.Plane depth mm:3.70±0.15 18. Pop n:20-35 19. Tear n:60-95 20. Inside diameter of empty mm:98.9 21. Usage: packing for chemicals, industrial lube, oil ect. 22. Packaging details: 50*23*23cm/1000pcs/20kg/per carton, 950000pcs/20gp
Supplier company name - Yalla Nsadar Name of manufacturer of goods - Yalla Nsadar Producing country - EGYPT Variety - Wonderful and Baladi Coliber - 100 - 120 mm Product category - Grade 1 Color - Red Storage temperature - 5 - 7 C Beginning of season - August End of season - November Collection region - Asuit Governorate Maturity % - 100% Product expiration date - 2 Weeks Under good conservation temperatures Growing method (open ground-greenhouse) - open ground Weight of one packge - 10 kg Package size - 38 cm X 28 cm X 25 cm Type of packaging - Carton Pallet size (length, width, height) - 100 cm - 120 cm 15 cm The number of pallets in the container - 20 Pallets Gross weight in container - Actual weight will be determined upon shipment, as it varies from company to another company Net weight in container - 20 Tons Price FOB $ (These are indicative rates based on the previous season and are subject to change upon contracting)- 770 $ / Ton Price CIF $ (These are indicative rates based on the previous season and are subject to change upon contracting) - 900 $ / Ton Delivery time (days) - 8 Days Duration of cargo preparation for dispatch (days) - 1 day Sorting, packaging and packing (without counting crop collection days) Type of delivery - Sea freight Possible scope of supply (tons') - 2 Containers per week Product description - According to the client's desire for what he consider appropriate for the market
Product description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Product description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Bridge Slotted Screens ND250 Wall thickness: 7 mm. Material: Carbon steel Surface treatment: galvanized Length: 5 meters Bridge opening: 0.75-1.5 mm or other Type of connectionï¼? bezel end
We can supply Used Rails from Saudi Arabia 1.Origin of Used Rails is Kingdom of Saudi Arabia 2. Quantity we can Supply is 100,000 MT X 12 Months = 1.2 Million Tons 3. Price is US$: 235 C I F - ASWP ... Price Includes Commission of $: 3 Per MT $:3 Per TON Commission means Commission of 3.6 Million Dollars Commission which Sellers pays in the very first month after opening of L / C 4. Loading of Used Rails will be at Jeddah Sea Port in Saudi Arabia. 5. Payment is at the Destination Sea Port of Buyer after Successful SGS Inspection. 6. End Buyer Opens Month to Month LC MT 700 from a Prime Bank and gets 20 % PB 7. End Buyer pays a Refundable Deposit of $:1334 to get Commercial Invoice 8. This Amount of $:1334 will be returned back to the End Buyer when he Opens L/C
We can supply Used Rails R - 50 & R - 65 through Baghlaf Steel from Saudi Arabia 1.Origin of Used Rails is Kingdom of Saudi Arabia 2. Quantity we can Supply is 100,000 MT X 12 Months = 1.2 Million Tons 3. Price is US$: 245 PER MT C I F - ASWP ... Price Includes Commission of $: 3 Per MT $:3 Per TON Commission means Commission of 3.6 Million Dollars Commission which Sellers pays in the very first month after opening of L / C 4. Loading of Used Rails will be at Jeddah Sea Port in Saudi Arabia. 5. Payment is at the Destination Sea Port of Buyer after Successful SGS Inspection. 6. End Buyer Opens Month to Month LC MT 700 from a Prime Bank and gets 20 % PB 7. End Buyer pays a Refundable Deposit of $:1334 to get Commercial Invoice 8. This Amount of $:1334 will be Returned back to the End Buyer when he Opens L/C Proper LOI to :----------- NOTE :-- Photos Video and Specs are attached here for your Good Self. Buyer to Address LOI or ICPO to : -- Swat Al Khail Trading Est. Kingdom of Saudi Arabia
Introduction: This machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut and bevel, single point and flange facing operations, as well as weld end preparation on open ended pipe. It can be used on pipe size from 1â?? to 56" of most wall thicknesses and materials. Pipe Size: 25-89mm or 1-3inch Wall thickness (standard)ï¼?â?¤30 Wall thickness (heavy duty)ï¼?â?¤110 mm Cutting speed: 42 r/min - 8 r/min Product material: chrome molybdenum steel, low temperature steel, titanium alloy steel, etc. Features: 1. Low axial & radial clearance. 2. Small working radius, suitable for any working situation. 3. Cutting and beveling at the same time. 4. Can be opened to use on pipe in the wall or no end open pipe. 5. Cold cutting work methods, which don't damage the pipe. 6. Multiple bevel joint types: V, U, J, compound and counter boring etc. 7. Customize the machine according to your requirements.
Qucik detail Place of Origin Zhejiang, China Brand Name CROP Model Number Fiber optic drop cable clamp Product name Fiber optic drop cable clamp anchoring clamp Sample Free Material Aluminum,Copper Installation Quick Certifications ISO9001 OEM Acceptable Export All over the world Business Type Manufacturer Description of Dead End Clamp for ADSS conductor The Dead End Clamp for ADSS conductor is designed to anchor insulated service lines with 2 or 4 conductors to the pole or wall. The ADSS tension clamp is composed of a body, wedges and removable and adjustable bail or pad.The PA series Anchor clamps are design to supporting the neutral messenger,the wedge can be self-adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. Standard: NFC 33-042. Material of ADSS tension clamp The ADSS tension clamp body, the main mechanical component is manufactured in heavy duty weatherproof synthetic material. The wedge, made from synthetic material exerts necessary mechanical pressure in retaining the cable in the body of the clamp. The pull hook is made from anti corrosion rod. For anchoring isolated coaxial and unipolar cables. Feature of PA series Anchor clamps 1.Simple and fast installation requiring no tools. 2.Suits to all field configurations. 3.Possible to mount on pole line hardware with open or closed eye. 4.Mechanical traction resistant. 5.Supports industrial duty tension. 6.Corrosion resistant. 7.Weatherproof. For the correct installing PA1500 dead end clamp, the following steps are recommended: Loosen the mooring hook from the anchor clamp. Place the hook en the place to be mooring point or support, fixing it inside the body of the clamp Remove the wedge from its base and then place the cable within the clamp. Replace the wedge to its corresponding position and proceed to tense the cable taut. Models AC-PA69-ADSS AC-PA1500-ADSS AC-PA2000-ADSS Cable diameter(mm) 5~ 9 8 ~ 12 12-15 Core No. 1 1 1 MBL(daN) 600 (800) 1000(1500) 1500(2000) (*)Add FA mean steel rope, add mean stainless steel rope
Valve Seat Puller & Claw, which is a hydraulic device. The connecting screw thread between leading screw and claw is API Standard and it can be exchangeable. Claw is manufactured by ASTM1066 and has 3 armed, 4 armed and full open type, which is suitable for the size of API-5#,API-6#,API-7#,API-8# valve seat. Hydraulic valve seat puller is a removal service tool in a mud pump. The hydraulic valve seat puller is used to take installed mud pump valve seat out of mud pump fluid end module, during the process of replacing the valves seat or mud pump maintenance. At the same time, eliminate damage to fluid end expendables caused by removing valve seat with a cutting torch. Material: Full-threaded rod, claw head is 35CrMo forged. Hydraulic Valve Seat Puller Mud pump valve seat puller consists of oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc. This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time. Advantage: simple structure, easy to use, can save a lot of manpower and time, and cost-effective.
Valve Seat Puller & Claw, which is a hydraulic device. The connecting screw thread between leading screw and claw is API Standard and it can be exchangeable. Claw is manufactured by ASTM1066 and has 3 armed, 4 armed and full open type, which is suitable for the size of API-5#,API-6#,API-7#,API-8# valve seat. Hydraulic valve seat puller is a removal service tool in a mud pump. The hydraulic valve seat puller is used to take installed mud pump valve seat out of mud pump fluid end module, during the process of replacing the valves seat or mud pump maintenance. At the same time, eliminate damage to fluid end expendables caused by removing valve seat with a cutting torch. Material: Full-threaded rod, claw head is 35CrMo forged. Hydraulic Valve Seat Puller Mud pump valve seat puller consists of oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc. This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time. Advantage: simple structure, easy to use, can save a lot of manpower and time, and cost-effective.
1.Aluminum housing with special electrophoresis processing, anti-oxidation surface is more wearable and durable. 2.Integrated and fully sealed structure and external circuit design, improves waterproof ability and installation efficiency. 3.Anti-tamper switch opens and triggers alarm if power cut off or end-cap removed. 4.Two different frequency channels, avoiding interference caused by adjacent rays. 5.Intelligent fuzzy analysis technology adopted to improve response speed and stablity. 6.Buzzer indication for well alignment. 7.Alarm method: any two adjacent beams breaks, helpful for preventing false alarms triggered by small animals and birds. 8.Adjustable response sensitivity. 9.Designed and recommended for protection of doors and windows. 10.High immunity to sunlight, rain, frost, fog, snow etc. ModelAbi10-482Abi30-482Abi60-482Abi100-482Abi10-764Abi30-764Abi60-764Abi100-764 Outdoor range10m30m60m100m 10m30m60m100m Height48cm76cm Beams24 ModelAbi10-1086Abi30-1086Abi60-1086Abi100-1086Abi10-1408Abi30-1408Abi60-1408Abi100-1408 Outdoor range10m30m60m100m 10m30m60m100m Height108cm140cm Beams68 ModelAbi10-17210Abi30-17210Abi60-17210Abi100-17210Abi10-20412Abi30-20412Abi60-20412Abi100-20412 Outdoor range10m30m60m100m 10m30m60m100m Height172cm204cm Beams1012 Detection methodSimultaneous interruption of adjacent 2 infrared beams Beam frequency2 channel ( a and b ) Power supplyDc11~18v Current consumption50~90ma max Response speed40msec Alarm outputSwitch ouput signal, no, nc optional Tamper switchNc, opens when cover removed Operating temperature -25â?? to +55â?? Environment humidity95% max Alignment angleHorizontal 180â°(â±90â°), vertical unadjustable Protection degreeIp65 MaterialPc engineering plastic, aluminum housing
Product description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
roduct description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Product description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Orange Variety: Navel Orange (November till end of March) Valencia (February till end of May) Size: 44 , 48 , 56 , 64 , 72 , 80 , 88 , 100 , 105 , 113 , 125 Container capacity: 24 MT Packing: Standard Telescopic Cartons Net weight (15 KG) Gross weight (16 KG) 20 pallets per container 80 Cartons per pallet 1600 Cartons Open Top Cartons N.W: 7 KG , G.W: 8 KG
Main applications General investigation, geophysical survey, road and tall building base prospecting, drilling projects like water well, blast hole and so on. Technical parameters 1. Whole machine Drilling depth: 110m Max. hole opening diameter: 219mm Hole termination diameter: 75mm Drill rod diameter: 50mm 2. Vertical axis: Vertical axis rotation speed: 142, 285, 570r/min Vertical axis traveling distance: 220, 450mm 3. Windlass Hoisting ability: 9.8KN Steel wire diameter: 9.3mm 4. Mud pump Maximum pressure: 1.2Mpa Working pressure: 0.7Mpa 5. Discharge capacity: 100L/min 6. Hydraulic pump Hydraulic pump pressure: 1.2Mpa Hydraulic pump rotation speed: 1500r/min 7. Matched driving power (diesel engine and motor): s1100 11KW Model ST-100 Drilling depth 100m Maximum open hole diameter 200mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90°~75° Drill weight(No include power) 510kg
1.Material: 300series, 304, 304l, , 316, 316l 2.Thickness:3-12mm 3.Od:73-610mm 4.Slot size:0.1-6.0mm 5.Wire diameter:1.5*2-3.5*6.8mm 6.Length:up to 6m 7.Filter rating:>95% 8.Width:unequal 9.End connection:thread/plain/flang 10.Certification:iso/ce 11.Surface treatment:galvanzied or coating 12.Advantage:from direct factory supply Fature of pipe base screen 1.Every wire and rod intersection is welded with consistent weld integrity 2.Tight slot control for improved sand retention 3.Rigorous quality control inspection 4.Nace compliant for corrosion resistance 5.Recessed weld rings for run-in damage protection 6.Alternate profile wire options for increased flow area and heavy duty applications (hrwp and frac pack). 7.Options for end and mid joint centeralisers (spiroliser type or blade) 8.Options for base pipe perforation open area. 9.Different metallurgy of base pipe available. The pipe base screen are used for deep water well application and oil field application It is used for sand control in wells with high pressure and high traction value due to the depths. Having the api casing inside a wire wrap screen jacket is supporting the screen and enhance the cabapitities and high tensil strength loads. Pipe base can be made from api pipe seamless casing spiral or stainless steel casing Opening area for the base pipe is up to 15% and for the jacket is up to 40%. Jacket slot size between 0.15mm to 15mm