LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LEDâ??s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE 177, CIE84, CIE-13.3, IES LM-79-19, Optical-Engineering-49-3-033602, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IESNA LM-63-2, IES-LM-80 and ANSI-C78.377, it recommends to using an array spectroradiometer with an integrating sphere to test SSL products. The LPCE-2 system is applied with LMS-9000C High Precision CCD Spectroradiometer or LMS-9500C Scientific Grade CCD Spectroradiometer, and a-molding integrating sphere with holder base. This sphere is more round and the test result is more accruate than the traditional integrating sphere. Measures: â?¢ Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI, CQS, TM-30 (Rf, Rg), Spectrum Test â?¢ Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, WPE, EQE, EEI, Energy Efficiency Class, Pupil Flux, Pupil Flux Efficiency, Pupil Factor, Cirtopic Flux, Plant Growth Lamp PAR and PPF â?¢ Electrical: Voltage, Current, Power, Power Factor, Displacement Factor, Harmonic(Optional) â?¢ LED Light Aging Test according to LM-80: Flux VS time, CCT VS time, CRI VS time, Power VS time, Power Factor VS time, Current VS time and Flux Efficiency VS time. Option: The LPCE-2(LMS-9000C) or LPCE-2(LMS-9500C) work with a IS-1.5MT Constant Temperature Integrating Sphere and TMP-8 Multiplex Temperature Tester can fully meet IES LM-82 High Precision LPCE-2(LMS-9000C) System Configuration (It is suitable for the Middle & Small Manufacturer or General Test Lab): High Precision CCD Spectroradiometer (LMS-9000C), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2050B/LS2050C/LS2012), DC Power Source (DC Series), AC Power Source (LSP-500VARC or LSP-500VARC-Pst), Integrating Sphere (IS-1.5MA and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W), 19 Inch Cabinet (CASE-19IN). You can download the detailed PDF here: LPCE-2 (LMS-9000C) High Precision CCD Spectroradiometer Integrating Sphere System Brochure±0.3nm, Wavelength Reproducibility: ±0.1nm Sample Scanning Steps: ±0.1nm Accuracy of Chromaticity Coordinate (x, y): ±0.002 (under Standard A Lamp) Correlated Color Temperature CCT: 1,500K~100,000K, CCT Accuracy: ±0.3% Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3) Luminous Flux Range: 0.01-200,000lm; Photometric linear Accuracy: ±0.5% Stray light:
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 595% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25°C, 3000 cycles 80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45°C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature 3%/month, 25°C 17 High temperature self-discharge rate 5%/month, 45°C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V discharged at 0.2C constant current to 2.5V at -20±2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
1. BLOW ROOM LINE COMPLETE 2007/08 LMW: MPO, LB3/6-1600MM, Condenser, Mono, Unimix L87/4 R., Flexiclean, Vetal Scanning, Fan, Pipe Line, Fire Line, Panel Board 2. CARDING 2007/08: LC-300A-V3 AZU Chute, 24-45 Coiler/11 NOS, LC300A-V4, 1 NOS 7/6 Chute, 24-45 Coiler 3. DRAWING 2007/08: LD/2-1 NOS, DO6/2 NOS, LMW R58853/3 NOS, Coiler 18-45 4. COMBER LINE 2007/08: LKS4-5 NOS, LK64-1 NOS, LH-20 Lap Former, NOS 2007/08 5. SIMPLEX SPEED FRAMES 2007/08: LF1400 A-144 SPL/S NOS, 7 Row Grill, 30MM Roll, Positive Clear, 4 Over 6. RING FRAMES 2007/08: 21/NOS - LMW LRG/5-1200 SPL, 36 MM Ring, 27-27-27 Roll, 170MM Lift, 18.5 SPL, P3-1 Drafting, Overhead Cleaning, Jagobi 7. AUTOCORNER: SCLAFHORST SAURER 338/6 NOS, 60 Drums, Gold 2007 Round Machine, 9 Pocket Quantum, Z Clear, D23 P, 2.5 Turn, 5.5 Degree Holder, AC-6/2017 Make, 60 Drums-1 NOS
Brake belt JQH-5X48-0107 SLEEVE-SHAFT FOR MUD PUMP LINER WASH PUMP SIZE-1X 1.5 LH-8.5 IMPELLER DIA 118 SERIES MCM MISSION 22782-2 Dies for preventer 2PPG230 X 35; 102 mm pipes Bendix AD-9 air dryer (109078)5762094 https://www.amlppmfg.com/air-oil-filter-kit-ar-zt-160-vsd-glc-pj08108-ac-0022.html Support ring P1100325AA mast lift cylinder for XJ-450S ROTARY ENCODER E6C2-CWZ6C Weighing Display Instrument PLAC-5105L-RA-P YB3-180M-4W 18.5 kW 1475 rpm IM3081 EXdIIBT4Gb HARTING 61036000020 Insert polyurethane 201PZL106 PZ-7 pump DB14 Up to 15 Watts for Harsh Industrial & Marine Environments GH3101-04.03End cover Joint 8'' 5015030 MI SWACO Pump body G0710-4868 TWS-600S pump HD mechanical part assembly SWITCH-MICRO DPDT CHERRY ELECT PROD CORP E-19 0403-0080-00 15797 EXTENSION,S-PIPE,4",SCH XXS,19-7/8" "Vacuum Cleaner Easy Dust Disposal Model No.: PV-XFH900 New Make: Hitachi, Japan or Equivalent" harting connector 19300161521 GASKET INTAKE MANIFOLD,65.08902A0082 Gasket 9644-1188 M/D TOTCOMD CHART,CIRC 0-10000PSI(PK/100) Y36A10136466-001 Sealing ring "Yx" D100 JB/ZQ4264-86 DIRECTIONAL VALVE 4WE6G-5X /BW 220-50NDA R900912493 4301040032 Bearing 2007140 AIR FILTER BGY2-220/1 QUQ2 FCB fan control box Valve assembly RS11314.05.12.00 includes: seat Cutter RG-42 T15 K6 for pipe-cutting machine turners AC Control Module 0521-2500-22 AF500202-011035-Face key 55 X30 X123 Horizontal rubber strip GNZS703E-01-02-01 XB11 5 Joule Xenon Beacons Exd, Weatherproof Deflector 2P109701 SPM SPM TWS-600S pump eXternal Spring Sort 45574 Clutch/Eaton 142434 20CB500 For F-800 /F-1300 Mud Pump Hadida Dies PSA-150 5 1/2" 140 mm FILTER 02320014 https://www.amlppmfg.com/hydraulic-motor-bjm-500hp1.html FiXing shoe 5" 19.100-02 STATOR WITH RIM 25�°1200 34562 Screw M12x30 KG80-6 10EA X Nozzle sleeve LateX 36 MFG RS30-2 43011312.24 Needle bearing 124721 Diaphragm 1.625"350 E039350 KIT,REPAIR,GRIPPER CYL,BUW Piston rod GH3161-05.18 Honghua HOLDING BUT R01-3007-010 BWK-2KR4 dry-type transformer temperature controller turning current sensor 63C2 DC0-10V SPRAYING PUMP ASSEMBLYGH3101-08.00 Thick tooth plate ZQ-203/100 SEAL,OIL,HOLDER,65.01501.5017E 1202849600 FILTER Mounting bracket for air conditioner engine Marvair 80428 Adapter GH 3161-28.01 G WASHER FLAT 50810-RC "Blowdown Valve P/N: 02250049-634 Make: Sullair" Two-position three-way rotary valve 23ZS-21,9161000000 harting connector 9320183101 STEM 2 REQ D 3-82-3XRA Solenoid valve 4v210-08 DC24V 0.15-0.8MPa ABB 64750071 IP54 RH40M-4EK.41.1R Hydraulic pressure gauge block 1168.062.000-03 Cylinder �¦170 RS11309.05.020 .157 Haihua F1300/1600 XB16 Strobe Warning Light Hazardous Locations, Weatherproof 5541321600 AIR CONDITIONER FILTER Handle for power circuit breaker SwitchLine OHB 45J6 Dies PSA-150 5 1/2" 127 mm V Belt Jaw 8V-4250 Locking pin for hydraulic wrench ZQ 203/100 ZQ203-003 Mechanical drive of hydraulic pump PARKER
Piston rod 1P102967 SPM SPM TWS-600S pump Application: crankshaft DiaphragmPneumochamber of air compensator for KB-75 GB/1230 assy Spare parts kit for pump F1000 Seal ring AH1001010404 BOMCO pump https://www.amlppmfg.com/gland-assy-packing-641103338-20622a.html Chain four X in-line pitch 31.75mm BZA8050-A3,Explosion-Proof Control Swtich With 3 Ea ( Rotary On/Off Sw) Drawing No.Hrwp200825-01-001 GH3101-08.09.00Hose joint:^22X^37 POLYPAK, PN. S03-1008-010 Movable washer 56.540-06 Spring springs 01.01-33M Jiangsu Rushi Tilting pad bearing 533-27TC53B Jaw 8 1/2â?? 12â?? p/n 200664 Brake repair kit 7650-0223 Seat Valve 11FG39 Seal ring RS11306.04.014/RS-F-1000 BCZ8060-125a/500v/3p+Pe/Z , Socket 125a Power Socket Air bag capsule AK4535010100 Retaining ring for hydraulic wrench ZQ 203/100 ZQ203-117 RVD hose f-25 dl 1m to XJ-450 MECHANICAL SEAL FOR CENTRIFUGAL PUMP 22451-1 MISSION 648414308 H224511A Diaphragm air chamber friction clutch ATD 324 HC 65.12503-5016 Fuel filter YHNGd explosion-proof flexible pipe EATON Circuit Breaker 6A 240V FAZ-B6/1 Clamping key KG80-17 Relief valve DBDS10K1X/100 Slider rod eXtension 0908402 Seal NgM40.00.00.000-F014 Pressure cover 107.36.110.03 Back-up Sleeve 45622-5 Air filter 1421403 Ring H7UB.173P O-ring 30�?2.65, PFF52-70-05 for Choke and kill Manifold Assy with valves HARTING 9300240304 Downpipe SL-225 ROLLER CAM FOLLOWER 30158767-04 Lifting hydraulic cylinder Z07120000023AA" Auxiliary winch hydraulic motor iNi YJ3-30-8013-ZP Bearing 206 for hydraulic tong TQ340/35YA TQ340-236 Output flange 29510996 Roller 01.01-10M Jiangsu Rushi Momentometr F 60 (0-25MRa) YN-60 Voltage indicator CVD3-IL with CVD/PC-7 7m capacitance value:10pF forZS3.2 35kV panel 1YHB00000002082, YHB25 explosion-proof electric head PROTECTOR PIPE RUBBER,4.5X6.75 92426 Circuit Breaker TMD 160 A P/N:02010030005 INSULATION MONITOR DJY-1S DJY-1S Horizontal centering roller Q12 12AZ-61 XYQ12,Z-03 to hydraulic tong XYQ12 HRFY-G-Led 2x18 B , Weather Proof Ss Linear Light Fixture 162.01 162.01 Suitable For Zone Spring 0.5 X 3 X 180SBW QB7461-2005 Motor A905-GH BG322004-0221 Right bearing chock https://www.amlppmfg.com/gate-valve-z23y-35-dh100.html SCREW: 5/8-11 UNC-2A X 100GH3101-02.20 Output shaft speed sensor 29543434 SPRING GUIDEGH3101-05.13.00 UNION HAMMER 3" NPT FIG.200 2000PSI 20300 Vibrating screen box DERRICK-2000 180 mesh HDF-2 CONTACT MODULE BE102C 1NC 690100475 O-ring KG80-14 MK-164-HL piston rubber 6-1/2 bearing support JC055.02.14 Dies for preventer 2PPG430 X 35; 324mm pipes Half-turn gate valve f80 to XJ-750S gear 0102-11M SB68-1.1.6 BEARING COVER GASKET X01173010 SAND PUMP SB6X8FJ IMPELLER FOR PUMP DY155-67-0102 XP40-H Explosion Protected Analogue-IP Hybrid PTZ Camera Station Thrust ring bearing 29500768 Socket 25YZ-4K,400V FIG.1002 WECO UNION 5P 10000 BUTT WELD 3220781
Application The FSR-01 Shrink Force and Ratio Tester serves the purpose of measuring both the shrinking forces and shrinkage ratio of heat shrinkable films. These films are typically created through extrusion and stretching (hot drawing) during their manufacturing process, retaining this stretched state even after cooling. When the heat shrinkable film is reheated to the temperature at which the initial stress was introduced and subsequently fixed during its production, this stress is released, causing the film to contract or "shrink back." Depending on the specific manufacturing treatment applied, the film can be categorized as either biaxially oriented (stretched in two directions) or uniaxially oriented (stretched in one direction). Test Process 1. A well-insulated air oven is heated to the set temperature. The two samples are placed separately on two test stations, for shrinkage rate and shrink/contraction force testing. 2. A temperature probe is located to measuring area, to give result as reference temp. The air oven is driven down automatically to cover the sample area. The force and shrink rate are to be measured and the shrinkage temperature is reached when the maximum shrinking force is attained. 3. When this force has decreased by around 15%~30%, the air oven is lifted and time is recorded. 4. The assessment of shrinkage ratio is performed at the mean time. Technical Features 1. PLC Control and HMI Touch Screen: ensuring industrial-level stability. 2. Well-Insulated Air Oven: The air oven is excellently insulated and capable of automatic lowering and lifting, enhancing the precision of the testing. 3. Non-Contact Shrink Ratio Measurement: accomplished through a noncontact method, improving accuracy and reliability. 4. Real-Time Display:including shrinking force, contracting force, and shrinkage ratio, allowing for immediate analysis and monitoring. 5. Elimination of Interference Factors: Irrelevant interference factors like friction and cool air are effectively eliminated, ensuring the accuracy of the results. 6. Stable Heating System: The heating system is stable and well-balanced, maintaining consistent and controlled test conditions. 7. Easy Sample Loading: Sample loading is made easy, streamlining the testing process and reducing setup time. 8. High-Resolution Sensors: The system is equipped with high-resolution force transducers and thermometers, guaranteeing precise measurements. 9. Connectivity and Software:(optional) It includes an RS232 port for data connectivity and offers optional professional software for advanced data analysis and reporting capabilities. Standards: ISO 14616, DIN 53369 Main Parameters Force Range 5 N ( or as required) Accuracy ±0.5% Resolution 0.001N Displacement Range 0.1 ~ 95 mm Accuracy ±0.1 mm Temperature Range Ambient ~ 210C Accuracy ±0.5C No. of Specimens 2 Sample size 110*15 mm, L*W Power Supply 220V 50Hz
Experience the irresistible charm of MIQ OVERSEAS Chocolate Tea, where the richness of premium black tea meets the decadence of velvety chocolate. Immerse yourself in a world of indulgence with every sip. Key Features: 1. Heavenly Blend: Our Chocolate Tea is a masterful fusion of exquisite black tea leaves and luscious chocolate, creating a harmonious blend that elevates your tea-drinking experience to new heights. 2. Velvety Smoothness: Indulge in the velvety smoothness that defines our Chocolate Tea. The infusion of real chocolate pieces lends a luxurious texture, transforming each cup into a moment of pure delight. 3. Decadent Aroma: The enchanting aroma of chocolate permeates every steep, enticing your senses and setting the stage for a truly indulgent tea-drinking ritual. 4. Versatile Treat: Whether enjoyed as is, with a dash of milk, or a sprinkle of your favorite sweetener, our Chocolate Tea offers a versatile canvas for creating your perfect cup of comfort. Brewing Instructions: Craft the perfect cup of Chocolate Tea with these simple brewing steps: Water Temperature: Heat fresh, cold water to just below boiling (around 90�°C/194�°F). Tea-to-Water Ratio: Use one teaspoon of Chocolate Tea for every 8 ounces of water. Steeping Time: Allow the tea to steep for 3-4 minutes to unveil its full chocolaty richness. Savor the Decadence: Transform your tea time into a moment of indulgence with MIQ OVERSEAS Chocolate Tea. Whether you\'re treating yourself or sharing with loved ones, our decadent blend promises a luxurious escape into the world of chocolate-infused bliss. Order Now and Delight Your Senses with Chocolate Tea!
Unleash the bold and robust flavors of our CTC Black Tea from MIQ OVERSEAS. Crafted with precision using the traditional Crush, Tear, Curl method, our black tea is a symphony of rich taste and invigorating aroma. Key Features: 1. Robust and Full-Bodied: Embrace the powerful essence of our CTC Black Tea. With each sip, experience a robust and full-bodied flavor that lingers on the palate, leaving an unforgettable impression. 2. Energizing Aroma: Awaken your senses with the enticing aroma of our black tea. The invigorating fragrance sets the stage for a rejuvenating tea-drinking experience. 3. Quick Infusion: The CTC method ensures quick infusion, making it an ideal choice for those moments when you crave a strong cup of tea. Enjoy a bold brew without compromising on time. 4. Versatility in Brewing: Whether you prefer it plain or with a splash of milk, our CTC Black Tea accommodates various brewing styles, allowing you to tailor your tea experience to perfection. Brewing Instructions: Unlock the boldness of our CTC Black Tea with these simple brewing steps: Water Temperature: Boil fresh, cold water and pour it over the tea leaves. Tea-to-Water Ratio: Use one teaspoon of CTC Black Tea for every 8 ounces of water. Steeping Time: Let the tea steep for 3-5 minutes, depending on your desired strength. Elevate Your Tea Experience: Discover the soulful warmth of MIQ OVERSEAS CTC Black Tea. Whether you\'re seeking an energizing start to your day or a comforting evening ritual, our black tea delivers a bold taste that captivates and invigorates. Order Now and Experience the Bold Flavors of CTC Black Tea!
TL-3 model Direct burning furnace with lower Inlet and upper outlet is consists of 8 parts: natural gas burner + inner tank + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After fully combusts the natural gas inside the inner tank, it�´s mixed with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
1. ANCS Foot Pain by Power Mate 2000 Soles of Feet, Foot Pain, Heel Pain, Calf Pain, Knee Pain, Back Pain, Stomach Gas, Navel, BP Control, Hemorrhoids, Migraine, Sinus & Insomnia 3 Reduces stress by standing on top of it for 5 minutes and walking 2. ANCS Foot Roller:- It is best in arthritis, arthritis by rotating the soles of the feet, keeping it on the floor and keeping the feet on top of it is to be rotated in circular motion. This is for all age group for kids and elderly. 3. Acupressure Handle Roller:- It is used especially on the back of the foot (calves) in sciatica pain, in back pain, for hard massage, reduce fatigue. 4. Acupressure Bitter gourd Roll: - By running it between the hands, stomach related disorders are removed, gas acidity, belching, diabetes, balances the navel chakra etc. 5. Acupressure Energy Ball (wood) Relaxes the middle part of the palm and the fingers. Along with this, exercising through it in the wrist and paralysis improves blood circulation. 6. Acupressure Jimmy is for applying pressure on the hands, feet and specific points of the body. Recharges acupressure points, better blood circulation 7. Hand Roll: - It is used to press the various acupressure reflexology points of both the hands, press firmly with the fingers in the fist. 8. Sujok Ring (set-2pc) :- Roll the fingers back and forth. Due to this, according to Sujok therapy, there is flexibility in the hands and feet, there is less tension in the muscles. 9. Thumb Jimmy:- By applying pressure on the ends of all the fingers, reduce the headache, tension, sleepiness and heaviness and put it in the thumb and give pressure on all the other fingers. The complete kit (to stay healthy) is self-use and very useful for gifting to the health lovers in the neighborhood, your family members, office staff, workers, they can also place bulk orders.
Autodail Wireless Alarm Set: 1 x Tri-Band (GSM 900/1800/1900 MHz) GSM-SMS Main aUnit in White [SXW] (Black color is available on request) 4 x Remote Controller 5 x Wireless Door Sensor 4 x Wireless PIR Motion Sensor 1 x Wired Indoor Siren 1 x Universal Power Adapter Plug adapter (suitable for buyer from any country) 1 x English User Manual 3 x FREE Waterproof Security Alarm System Stickers to scare burglar away!! Product Information GSM 900/1800/1900 MHz frequency band (Tri-band) Wireless Device Operation Frequency 433MHz AUTO CALL/ SMS MESSAGE ALARM ALERT FUNCTION Zone specification function: let you know which sensor is being triggered No land phone line is required: work with built-in cellular - Ideal for house/ boat/ caravan 3 wired and 16 wireless distinguishable guard zones Auto-dial and text function: can pre-install 5 telephone numbers in the unit. Will auto-dial and/or send text message to the numbers when the system is triggered Remote command and access to the system from anywhere via any telephone or text message Can program 5 groups of text message in the unit. Will send out text message to the number when the system is triggered. It can tell you which zone is being triggered Full or partial arm the system: you can bypass the motion detectors and walk around the property without triggering the system when the rest of sensors are still in armed mode 2 outputs to control home appliances: can add switch box [SXS] to the alram host to have remote home appliance control function including room lights, air conditioner, etc 1 onboard relay and one open collector speaker output are available for customer application
Our DZ47 63Z 2P mini circuit breaker (MCB) is a compact, resettable device that protects electrical circuits from overcurrent and short circuits, offering a safe, reusable alternative to traditional fuses. Highlight Of DZ47-63 1-4P 1-63A Mini MCB As one of the best mini circuit breaker suppliers in China, Religare Electric is good for producing the DZ47-63 1-4P 1-63A Mini Circuit Breaker, particularly in the popular 2-pole configuration known as DZ47-63Z 2P. This mini circuit breaker is designed to offer reliable electrical protection in a compact and efficient form factor. 1. Compact Size: The mini circuit breaker is designed to be small and compact, allowing for easy installation in limited spaces. 2. Quick Response: It provides fast and precise detection of electrical faults, allowing for swift interruption of abnormal currents to prevent damage or hazards. 3. Reliable Protection: The mini circuit breaker offers reliable protection against overloads, short circuits, and ground faults, safeguarding electrical circuits and connected devices. 4. Resettable: Unlike traditional fuses, mini circuit breakers can be reset after tripping, eliminating the need for replacement and reducing downtime. 5. Versatile Application: Mini circuit breakers can be used in a variety of applications, including residential, commercial, and industrial settings, providing flexible protection for various electrical systems. For more information about power supply protection devices, please feel free to contact us!
LED beanie hat - 100% Acrylic Rechargeable LED Beanie: Our rechargeable hat with light provide a standard USB port for battery charging, which means you can charge it in car charger,computer or portable power bank. Just takes about 2-4 hours to fully charge depend on different charging methods, this beanie will always light your way when you need it. Super Bright: With 3 brightness settings, you can adjust the brightness of the hat by pressing according to your own needs. It can last up to 8 hours in the lowest level, 4 hours in medium level and 2 hours in the highest level. Youâ??ll have the perfect amount of light for any task. Keep You Warm: This headlamp beanie is made of soft and elastic acrylic material, comfortable and washable. One size fits all men,women,the simple and stylish design allows everyone to easily match different clothes in the cold winter. Hands Free: No matter what you want to do, this hands free led lighted hat which approves IPX44 water resistant is up for the challenge. Wear it dog walking at night or early morning, running,jogging, camping,fishing, biking, grilling, auto repair, and more. Light your way in dark night and enrich your quality of life. Gifts Idea: Comfortable, super bright, warm, washable, light weight perfect for working out, giftable, our Unisex beanie with light is best present choice for Thanksgiving, Christmas, New Year's Day, Valentines Day, Father Day, birthday and other special occasions. A perfect Gifts for Dad Husband Him Men Women Boyfriend Handyman.
Features for the DR Power WM13026DEN Wide Area Mower FLEX-SPEED Drive System Match your mowing pace to your walking pace by squeezing a pressure-sensitive, ergonomically designed hand lever. Simply pull the lever toward you to increase speed or relax your grip to slow down. Dual Blade Design Twin blades allow for greater blade tip speed than one longer blade and that produces a clean, high-quality cut. The leading blade (on operator's left side) feeds its clippings into the trailing blade, so they get recut resulting in more finely chopped clippings and small windrows when using side discharge. 3-in-1 Mower Bag, mulch, or side discharge. Bagger and mulching plug included with your mower. Bagger holds up to 2 bushels, so you spend more time mowing and less time emptying. Powerful OHV Engine DR OHV engine has 8.8 ft.-lbs. gross torque (@2500rpm as per SAE J1940). Plenty of power to handle the extra mowing width. One-Touch Height Adjustment Choose from 8 different cutting height settings, from 1" to 4". Never Flat Tires Roll along easily with no-maintenance, never flat wheels â?? 8" high in the front, 10" in the rear. Specifications General CARB Certified: Yes Cutting Blade Tip Speed: 19,000 FPM Cutting Height: Adjustable, 1" to 4" Cutting Width: 26" Grass Bagger Capacity: 2.5 bushels Number of Blades: 2 Engine Air Filter: Paper Cooling Methods: Air cooled Displacement: 200 cc Engine Type: OHV Ft Lbs. Torque: 8.8 Lubrication: Splash Make: DR Number Of Cylinders: 1 Oil Capacity: 17oz Oil Type: SAE 30W HD Pre-Cleaner: Foam
TL-2 model Direct burning furnace is consists of 6 parts: natural gas burner + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by full combustion of natural gas. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 4. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
Essential details Place of Origin: Guangdong, China Brand Name: solar lights outdoor Model Number: MST-SR-009-3 Application: ROAD Color Temperature(CCT): 3000-6000K IP Rating: IP66, IP66 Beam Angle(�°): Type II / Type III / Type IV / Type V CRI (Ra>): 70 Input Voltage(V): DC 36V Lamp Luminous Efficiency(lm/w): 200 Lm/w ~160 Lm/w Lamp Luminous Flux(lm): 8000Lm, 8000Lm Warranty(Year): 3-Year Working Temperature(â??): -20 - 60 Color Rendering Index(Ra): 70 Certification: EMC, RoHS, ce, FCC Power Supply: Solar Light Source: LED, SMD 5050 LED / 3030 LED Support Dimmer: Yes Lighting solutions service: Lighting and circuitry design, Onsite metering, DIALux evo layout, LitePro DLX layout, auto CAD layout, Project Installation Lifespan (hours): 100000 Working Time (hours): 100000 Product Weightï¼?kgï¼?: 14 Model: MST-SR-009-3 Solar Panels: Monocrystalline silicon Battery: 30Ah Color Temperature: 3000-6000K Charging Time: 6-8 Hours Input Voltage: DC 36V Material: Die-cast Aluminum + Stretched Aluminum Product Advantages 1.Patented Product, Novel Appearance, Seamless Integral Molding. 2.The Product Size Can Meet Different Application Occasions, and is Suitable for Various Auxiliary Roads and Branch Roads. 3.Rotating Holder, Fit Different Angle's Installation. 4.Large Battery Box, Built-in New LifePo4 Battery 5. High-quality Monocrystalline Silicon Solar Panels, Up to 25 Years of Service Life 6. Customized Motion Sensor, the Sensing Distance Can Reach 10M 7. Light Sensing Control, Automatic Power on at Dusk, Automatic Power off at Dawn.
bestscooterstore * com Product Description CANNONDALE TOPSTONE CARBON LEFTY 3 DISC GRAVEL ROAD BIKE 2021 A super-versatile gravel bike with innovative Kingpin rear suspension and Lefty fork suspension provides complete off-road capability and sublime on-road comfort Cannondale BallisTec Carbon Frame with Kingpin LockR Pivot rear suspension system that provides up to 30mm of travel and instant peddling response Proportional Response Construction: Suspension and overall frame ride-feel is custom tuned by size, using different carbon layup and different tube dimensions All-New Lefty Oliver Carbon fork with 30mm of travel Dialed Endurance Fit: Offers a perfectly balanced riding position Robust and reliable 650b WTB alloy wheelset with high volume 47mm wide tyres Shimano GRX 11-speed gravel specific groupset Shimano GRX hydraulic brake configuration Cannondale finishing kit DirectLine cable routing provides easy internal cable routing Dropper Ready: Built to accept an internally-routed 27.2 dropper seatpost Fully mudguard ready. A removable mudguard bridge on the rear stays facilitates easy removal SPECIFICATION Frame Cannondale BallisTec Carbon Frame | Kingpin suspension system | 12x142 Speed Release thru-axle | dropper post compatible | direct line cable routing Fork Cannondale Lefty Oliver Carbon | 30mm travel | Chamber Damper with All-Over tune | ISO High-Ride air spring | tapered steerer | 650b | 55mm offset Headset Integrated, 1-1/8" - 1-1/2" Stem Cannondale 2, 6061 Alloy, 31.8, 7�° Handlebar Cannondale 3, butted 6061 alloy, 16-degree flare drop Grips Cannondale Bar Tape, 3.5mm Front Brake Shimano GRX 400 hydraulic disc,160mm RT76 rotor Rear Brake Shimano GRX 400 hydraulic disc, 160mm RT76 rotor Brake Levers Shimano GRX 600 hydraulic disc Front Derailleur N/A Rear Derailleur Shimano GRX 800 Wide, 11-speed Shift Levers Shimano GRX 600, 11-speed Cassette Shimano SLX, 11-42, 11-speed Chain Shimano HG601, 11-speed Crankset Cannondale 1, BB30a, OPI SpideRing, 40 tooth chainring Bottom Bracket Cannondale BB30 Front Wheel WTB ST i23 TCS, 28 hole, tubeless-ready alloy rims, | Lefty 50 6-bolt hub | 28 x stainless steel, 14g spokes Rear Wheel WTB ST i23 TCS, 28 hole, tubeless-ready alloy rims | Formula DHT142, 12x142mm center lock hub | 28 x stainless steel, 14g spokes Front Tyre WTB Venture TCS Light, 650 x 47c, tubeless-ready Rear Tyre WTB Byway TCS Light, 650 x 47c, tubeless-ready Saddle Fabric Scoop Shallow Elite, cro-mo rails Seatpost Cannondale 2, UD Carbon, 27.2 x 350mm Pedals Available to be purchased separately Manufacturer Claimed Weight 9.5kg / 20.94lbs (size S)
Enhance Your Office Display with Custom Print Mini Table Flags Custom Print Mini Table Flag: The Perfect Desk Flag for Office Display Looking for a unique way to showcase your brand or add a touch of personalization to your office space? Our custom print mini table flags are the perfect solution. These desk flags are not only visually appealing but also serve as a powerful marketing tool. With their compact size and customizable design, they are ideal for office display. High-Quality Materials and Printing Our mini table flags are made from premium materials to ensure durability and longevity. The flags are printed using state-of-the-art technology, resulting in vibrant colors and sharp details. Whether you choose to display your company logo, a motivational quote, or a custom design, our printing process guarantees a professional and eye-catching finish. Customization Options We understand that every business is unique, which is why we offer a wide range of customization options for our mini table flags. You can choose from different flag sizes, shapes, and materials to suit your preferences. Additionally, we provide various printing techniques, including screen printing, digital printing, and heat transfer, to achieve the desired look for your desk flag. Furthermore, our design team is available to assist you in creating a custom design that aligns with your brand identity. Whether you have a specific vision in mind or need guidance in developing a design concept, we are here to help you bring your ideas to life. Benefits of Mini Table Flags for Office Display 1. Brand Visibility: Placing a custom table flag on your desk or reception area is an effective way to increase brand visibility. It serves as a constant reminder of your company and can spark conversations with clients, visitors, and employees. 2. Professional Image: A desk flag adds a touch of professionalism to your office space. It shows that you pay attention to detail and take pride in your brand. It also creates a positive impression of your business, making it more memorable to potential clients and partners. 3. Versatile Marketing Tool: Mini table flags can be used in various settings, such as trade shows, conferences, and promotional events. They are portable and easy to set up, allowing you to showcase your brand wherever you go. They also make great giveaways, ensuring that your brand remains in the minds of recipients long after the event. 4. Customizable Messaging: With our custom print mini table flags, you have the freedom to change your messaging as needed. Whether you want to promote a specific product or service, highlight a company milestone, or convey a seasonal greeting, you can easily update the design of your desk flag to reflect your current marketing objectives.
1.1 Description Dyson Replacement or Additional Click-in Screw-in li-ion Battery for V11 Cordless Stick Vacuums 25.2V 3Ah 1.2 Cell Model 21700 li-ion battery cell 7S1P 1.3 Typical Capacity 3000mAh 1.4 Typical Voltage 25.2V 1.5 End of Charge Voltage 29.4V 1.6 Charge Current 0.5C 1.7 Charging time 2-3 Hours 1.8 End discharge Voltage 17.5V 1.9 Wide compatibility Dyson V11 Absolute, V11 Absolute Plus, Dyson V11 Complete, Dyson V11 Fluffy Cordless Vacuum Cleaner. 2.0 Charging cycle more than 300 times 2.1 Over-discharge Voltage Protection cell 2.5V 2.2 Over-Current Discharge Protection YES 2.3 Short circuit protection YES 2.4 Dimension 179.6*82.6*99mm 2.5 Weight 0.67kg 2.6 Operation Temperature Range Charge 0~45 C, Discharge -20~60 C
1.1 Description Professional digital cinema li ion battery 14.8v 190Wh V mount 5V 2.1A output 1.2 Cell Model 18650 lithium ion cell 1.3 Typical Capacity 13.2Ah 1.4 Typical Voltage 14.8V 1.5 End of Charge Voltage 16.8V 1.6 Charge Current 0.5C 1.7 Charging time 2-3 Hours 1.8 End discharge Voltage 10.0V 1.9 Max continuous charge current 4A USB 2.1A, D-tap 4A 2.0 Maximum Continuous Discharging Current 10.4A 2.1 Over-discharge Voltage Protection cell 2.5V 2.2 Over-Current Discharge Protection 15-20A 2.3 Short circuit protection With protection 2.4 Dimension 56.8 ±0.5mm 96.0mm ±0.5mm 150.0 ±0.5mm 2.5 Weight 1010g ±10g 2.6 Operation Temperature Range Charge 0~45 C, Discharge -20~60 C