Features: 1) Engine: 48cc, single-cylinder, air-cooled, 4-stroke 2) foot start and electric start 3) front tire:120 / 50-9,rear tire:130 / 60-10 4) Max speed: 60km / h 5) Battery: 12V / 7Ah 6) Wheel: rubber vacuum wheel 7) Drive mode: chain driving 8) Oil type: petrol 9) Tank capacity: 1.6L 10) Cooling system: air cooling 11) Maximum load: 300 pounds 12) Product dimentions 145 x 40 x 80cm
API & ISO9001 Top Ceramic proppant What is ceramic proppant used for? Ceramic proppant are the indispensable materials used in acid fracturing and hydraulic fracturing of new and existing natural gas and oil wells, which can increase the output and extend the service life of oil & gas wells. A study of production rates published by the Society of Petroleum Engineers has shown that the additional strength and uniform size and shape of ceramic proppant provide higher performance than other types of proppant. How does ceramic proppant work? The hydraulic fracturing process consists of pumping fluids down a well at pressures sufficient to create fractures in the hydrocarbon-bearing rock formation. Ceramic proppant is transported in the fluid to fill the fracture at a very high pressure. After flowback, the proppant-filled fracture creates a permeable channel through which the hydrocarbons can flow more freely, thus increasing both production rate and service life. Where is ceramic proppant from? As known to all, there is abundant superior bauxite in China .The ceramic proppant is sintered from this bauxite and other additives by the rotary kilns with a temperature more than 1300¡ãC. Its mineral composition is aluminum oxide, silicate and iron ¨C titanium oxide. Why people choose the TOP Ceramic Proppant? Quality Guarantee: API Q1& ISO 9001:2008 certificated, Stim-Lab &Frac-Tech tested. Professional Qualification: more than 10 years¡¯ production and export experience. Stable Supply: annual output over 210,000MT. Reliable Logistics: senior qualified team, highly efficient transportation. Comprehensive Service: spot offer available in North America, and we provide 24/7 service. Our Top Ceramic proppant can be classified as followed: 1. by bulk density: Light density, medium density and high density. 2. by compression strength: 52MPa (7500psi), 69MPa (10000psi), 86MPa (12500psi), 103MPa (15000psi). 3. by specifications: 6-12 mesh, 8-16 mesh, 12-18 mesh, 12-20 mesh, 16-20 mesh, 16-30 mesh, 20-40 mesh, 30-50 mesh, 30-60 mesh, 40-60 mesh, 40-70 mesh, 70-140 mesh, etc. Moreover, we can produce proppants with different specifications according to your particular requirements. Quality is our life! We pay more attention to our technological innovation and quality control. Our company has got the ISO 9001-2008 and API certifications and our TOP CERAMIC PROPPANT meets and exceeds ISO and API standards. It has passed the tests of Frac Tech and Stim- Lab. Our TOP CERAMIC BEADS wins the high evaluations from our customers both at home and abroad, such as CNPC, SIONPEC, etc. Different specifications are available according to customers¡¯ requirements. 1.5MT/bag
API & ISO9001 Top Ceramic proppant What is ceramic proppant used for? Ceramic proppant are the indispensable materials used in acid fracturing and hydraulic fracturing of new and existing natural gas and oil wells, which can increase the output and extend the service life of oil & gas wells. A study of production rates published by the Society of Petroleum Engineers has shown that the additional strength and uniform size and shape of ceramic proppant provide higher performance than other types of proppant. How does ceramic proppant work? The hydraulic fracturing process consists of pumping fluids down a well at pressures sufficient to create fractures in the hydrocarbon-bearing rock formation. Ceramic proppant is transported in the fluid to fill the fracture at a very high pressure. After flowback, the proppant-filled fracture creates a permeable channel through which the hydrocarbons can flow more freely, thus increasing both production rate and service life. Where is ceramic proppant from? As known to all, there is abundant superior bauxite in China .The ceramic proppant is sintered from this bauxite and other additives by the rotary kilns with a temperature more than 1300¡ãC. Its mineral composition is aluminum oxide, silicate and iron ¨C titanium oxide. Why people choose the TOP Ceramic Proppant? Quality Guarantee: API Q1& ISO 9001:2008 certificated, Stim-Lab &Frac-Tech tested. Professional Qualification: more than 10 years¡¯ production and export experience. Stable Supply: annual output over 210,000MT. Reliable Logistics: senior qualified team, highly efficient transportation. Comprehensive Service: spot offer available in North America, and we provide 24/7 service. Our Top Ceramic proppant can be classified as followed: 1. by bulk density: Light density, medium density and high density. 2. by compression strength: 52MPa (7500psi), 69MPa (10000psi), 86MPa (12500psi), 103MPa (15000psi). 3. by specifications: 6-12 mesh, 8-16 mesh, 12-18 mesh, 12-20 mesh, 16-20 mesh, 16-30 mesh, 20-40 mesh, 30-50 mesh, 30-60 mesh, 40-60 mesh, 40-70 mesh, 70-140 mesh, etc. Moreover, we can produce proppants with different specifications according to your particular requirements. Quality is our life! We pay more attention to our technological innovation and quality control. Our company has got the ISO 9001-2008 and API certifications and our TOP CERAMIC PROPPANT meets and exceeds ISO and API standards. It has passed the tests of Frac Tech and Stim- Lab. Our TOP CERAMIC BEADS wins the high evaluations from our customers both at home and abroad, such as CNPC, SIONPEC, etc. Different specifications are available according to customers¡¯ requirements. 1.5MT/bag
The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 1/2"~13 3/8"-75 Type SB Manual Tong Type SB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 1/2~13 3/8 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, SB Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 1/2~13 3/8. (5).Rated Torque range from 40kN·m to 75kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type SB. 10.Rated Torque(kN*m): 40~75. 11.Size Range: 3 1/2"~13 3/8". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 50sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
Functions of MMT 1. Boost the octane number of gasoline 2. Increase engine driving power, decrease its oil consumption 3. Better soluble abilities with MTBE and ethanol 4. Reduce disposal of pollutants in automobile tail gas 5.Improve octane number function to the waste gas cat of the automobile 6. Improve operating of oil refining 7. Increase the flexibility of the gasoline concoction Packed in 200L zinc iron plating pail, net weight 200 kg/pail, or packed in specially made storage tan, 5 T, 10 T per tank or as required
(1)product name Made in china gypsum board production line equipment (2)capacity 2-40 million square meters (3)fuel Coal, gas, diesel oil, heavy oil, ect (4)cooperation countries Iran, qatar, saudi arabia, sudan, pakistan, ukraine, gypsum (5)packing In wooden case and in nude 40gp container and fr container Average weight of container: 20 tons (6)after-sales services 1)the machine guarantee 1years except worn parts such as bearings, electric buttons 2)machine installation and commission: 2 to 4 months when the buyer prepare the Installation and commission conditions 3we offer engineers train the buyers to operate the machine and after you master the machine Than pay us the installation and commission payment 4)in order to guarantee the machine running, each year we will send engineer to check and Development the technology with the buyer 5if the buyer can not run the machine well then we will send the production engineers to help The buyer run the machine , and we can cooperate for long terms (7)gypsum specification Length:2440mm Width:6mm-15mm Thickness:9.5mm-15mm (8)type Standard gypsum plasterboard Fire-resistant gypsum plasterboard Water resistant gypsum plasterboard
Products Seamless pipe,welded pipe,Oil casing pipe,Fittings Secification 1.Wall Thickness:STD,SCH40-SCH160 OD: 1/8"-48' 2.Length:3-12 (As per the Wall Thickness of pipes) 3.Pipe end:Plain, Bevel, Threading and without screw threading 4.Surface protect:3 Layer PE,Oil painting,Galvanized Property 1.Material:ST37,ST42,S52 2.Tensile strength:335-600Mpa Yield strength:205-345Mpa 3.Chemical composition:(C:0.07-0.2,Si:0.17-0.55,Mn:0.35-1.6) Quality control 1.Standard:ASTM A106,ASTM A53,DIN1626,DIN17175,API 2.Pass ISO-9001Certificate 3.Third party inspection is available Size: 1/2"-24". Wall thickness: Sch10~Sch160, XXS, XS, STD, SGP. Or as per customer¡¡£¤s special requirement. Standard: API, ASME B36.10M 1996, JIS, DIN, GB8162, GB8163, GB5310. Material: ASTM A106 GRB/ A53 GRB/ Q345/ Q235/ A335/ ST37/ ST52/ 20#/ 10#/ API 5L GRB, PSL1, X42, X52 ¡- etc. Or as per customer¡¡£¤s special requirement. Productive technology: Hot rolled, heat diffusion, cold-drawing, hot piercing Packing: Plastic cap for both end, steel strips bundled. Surface treatment: Black painting/coating, black rust-proof oil, hot galvanizing, 3PE, epoxy coating. Application range: Petroleum, chemical, power, gas, stream, metallurgy, ship building, liquid, water transportation, structure, construction, etc. Min Order Quantity: Normally 5 Ton or according to customer's requirement. Delivery Time: Within 25 days after payment, or as per customer¡¡£¤s requirement. Production Capacity: 80,000 Ton/Year. Others: 1.Special design available according to requirement; 2.Anti-corrosion and high-temperature resistant with black painting; 3.All the production process are made under the ISO9001:2008 strictly. We have professional pipe fittings and steel pipes production equipment in China, all of products are produced by ourself, so we can give you BEST price with BEST quality, hope we will co-operate with each other based on mutual benefits.
This division is leading manufacturer and stockist of Flanges. This flanges are manufactured and supplied in different a range of pressure ratings and sizes and with different specification to meet customer requirement. This flanges to be used in industries like pipeline engineering, oil and gas industry, mechanical and plant engineering, marine industry, waste water management, chemical industry, petrochemical industry, power industry, aerospace, food processing and many more. Industrial Steel Flanges, Manufactured as per ANSI B 16.5 / DIN / JIS – Stainless Steel Flanges, Carbon Steel Flanges, Alloy Steel Flanges. Product Details Flange Stock/Manufacturing Range: (ANSI / ASME Flanges) Size Range : ½" (15 NB) to 48" (1200 NB) Standards : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API 605, AWWA, Custom Drawings. Pressure Ratings : Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 Etc. Type of Flanges : Weld Neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long Weld Neck Flanges (LWNRF), Spectacle Blind Flanges, Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges Etc. Flange Face Type : Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ) Coating /Surface Treatment : Anti-Rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized Special Requirement : With such a vast experience and expertise, other special large diameter flanges can also be supplied on customer demand.
Dongfang Yoyik Engineering Co., Ltd is located in Deyang, Sichuan, provides different kinds of industrial products and brands. Our company is specialized in researching and developing hear-resisting and wear-resisting materials. As a pump and valve manufacturer ourselves, we also offer other brands both domestic and from abroad. LVDT Position Sensor TDZ-1-02 "filter YWUX-160*100 DFB100-80-230 Mechanical seal solenoid valve 4WE-10-DOF/E-W240-20 regeneration device Precision filter DL009001 HL-3-150-15 LVDT sensor dehydration filter J-150*1120 C9231118 LVDT sensor WLGCA2-2-TH position switch vacuum pump solenoid valve 30-WS filter STXX-400*40 filter LH0500R30BN/HC OPC solenoid valve HQ16.12Z LVDT Position Sensor LVDT Position Sensor TDZ-1-02 pressure hose SMS-20/N1/4-3048mm-C Speed monitor HY-TACH ZJ-22-T2 bolt heating rods for steam turbines generator stator cooling water filter SWFY4 filter YSF15-110 filter FAX (NX)-63*20 filter LQ01-02 filter LXM15-11.2 oil filter Q2U-A63*20S oil filter ZL-100*180 oil filter ZUI-A40*30S filter TZX-E250*10 " "steam turbine bolt heater ZJ-20-53 sealing ring HB4-56J8-184 filter 21FC5121-110*25/20 oil filter Q2U-H100*30S filter 4PD110*160A3 coupling KSB65-250A lubricant oil cooler sealing strip N35-MGS-16C/2 B02.30.01.04 MSV stem filter 0280D020BN3HC oil filter WUI-A63*80S WZK.W.02.8.000006 EH Main Oil pump filter TZX-E400*5Q3 pressure hose SMS-15/20-2438mm-C mechanical seal YCZ65-250C solenoid valve 4WE10D31/CW110N9Z4 EH oil pump outlet filter V6021V4C03 filter SFBX-63*5 DF6202-005-050-04-00-10-000 Variable reluctance speed sensor filter PQX-300*10Q2 flushing filter DP2B01EA01V/F Filter 311275311275 sealing ring HB4-56J8-175 regeneration device Precision filter W.38.Z.000218 gasket JB/ZQ4080-1997 48 100HV LVDT Position Sensor TDZ-1-02 DFSYC-2019-04-01-A
China factory supply Abrasive glass beads media Product Description Glass beads are made of broken glass, flat glass and other raw materials by high temperature melting bead processing. Low thermal conductivity, high strength, good chemical stability, and the texture of glass beads themselves, glass beads instead of plastic raw materials are widely used in filling, such as gravity blanket filling, compression filling, medical filling, weighted blanket filling, toy filling and so on. glassbeads5.png Advantage 1. The chemical composition is inert silicon dioxide and there is no worry about the interference of chemical activity; 2, round elastic particles, impact resistance, can be recycled many times, less loss; 3, the spray wear is small, extend the service life of the nozzle; 4, the surface of the ball, will not damage the processing surface and precision size; 5. After treatment, the work-piece surface is smooth, with a special aesthetic feeling, improving the product value; 6. Suitable for dry and wet sand blasting; 7. The fine glass beads used for the metal micro-cracks can be easily displayed after the wet sandblasting; 8, for the processed work-piece with matte effect, highlighting the metal color, not rust and other advantages, no need to carry out pickling derusting treatment. Application 1,Road making, airport road marking; 2,Fillers for various insulation and sound insulation products; 3,Enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc 4,provide brightness for medical mechanical instruments and automobile parts 5,Be used for reflective safety clothing to improve safe
XE150D Crawler Excavator 1. The overall layout and the axle load distribution are more reasonable to achieve better traveling stability and the maximum traveling speed is up to 40km/h to realize faster site transfer speed. 2. The domestic leading hydraulic system distribution technology features high energy-saving and efficiency. 3. The highest breakout force on the loading end is leading the industry by 15%~20% compared with like models. 4. The advanced structure and hinge points on the digging end and the industry's largest rotating angle of the bucket ensure strong soil holding capacity. Specification Item Parameters Engine Model QSF3.8 Equipped Electronic fuel injection Four strokes Water cooling Turbo-charging Air to air intercooler No. of cylinders 4 Output power 93/2200 kW/rpm Torque/speed 500/1300 N.m/rpm Displacement 3.76 L Operation Weight 14600 kg Bucket Capacity 0.32-0.71 m ³ Main performance Travel speed(H/L) 5.3/3.2 km/h Rotating speed 11.7 r/min Gradeability 35° Ground pressure 37 kPa Bucket digging force 106.9 kN Arm digging force 73.4 kN Maximum traction 184 kN Hydraulic system Main pump K7V63DTP Rated flow of main pump 2Ã?123.5 L/min Pressure of prime valve 34.3/37.0 Mpa Pressure of pilot system 3.9 Mpa Oil capacity Fuel tank capacity 260 L Hydraulic tank capacity 105 L Engine oil capacity 11 L Appearance size Overall dimensions(L*W*H) 7795Ã?2590Ã?2900 mm Width of platform 2490 mm Width of crawler 600 mm Crawler gauge 1990 mm Clearance under counterweight 948 mm Min. ground clearance 477 mm Min. tail swing radius 2325 mm Working scope Max. digging height 8649 mm Max. dumping height 6185 mm Max. digging depth 5535 mm Excavation depth of 8 feet level 5324 mm Max. vertical wall digging depth 4697 mm Max. digging reach 8304 mm Min. swing radius 2445 mm Standard Boom length 4600 mm Arm length 2520 mm Bucket Capacity 0.61 m ³ Optional Arm length 2100/3010 mm Bucket Capacity 0.32/0.4/0.71/0.52
Skaln Best Quality Hydraulic Oil With 32# 48# 68# Different Size Refined by the depth of ultra-high viscosity index base oil and a unique additive technology, international advanced production technology by blending together the anti-wear hydraulic oil. Meet the requirements of the HF-O/HF-2 specification requirements. So it has perfect thermal oxidition stability, demulsibility, EP anti-wear property and so on. It's suitable for many hydraulic system, such as metallurgical equipment, engineering machinery, machine tools, marin auxiliary, etc. Attention Keep hydraulic system clean, and clean up the tank sludge and scrap metal. Change oil accoring to the specification strictly. keep the adding oil tool clean in case of polluting the oil when using and storing. Protect hydraulic system from polluting, mixing water, mixing air and control the using temperature. Avoid contacting with skin for a long time. Do not pour waste oil into drains, waterways or any other natural environment. Company Profile SKALN is specialized in manufacturing almost kinds lubricant oil ,including industrial lubricant oil series,automobile lubricant oil seriese and special kinds lubricant oil,such as hydraulic oil,heat transfer oil,transformer oil,chain oil,diesel engine oil,gear oil,white oil,cutting fluid and grease. We focus on the metal working fluid, chain oil, way lubricant and special lubricant oil.SKALN was established in 2011 in Chongqing, China. Our haed office in Shanghai has more than 15 years. We have rich experience in production after more than 15 years of accumulation and development. Each process is strictly monitored. Our brand and logo from the nature, which means that we pursue environment friendly and sustainable development of the cooperation relationship. We hope that win-win cooperation. FAQ 1.How can I get the sample to check your quality? We can send you a small bottle samples for free,you only pay for the freight . 2.How long can I get the sample? About 7~15 days. 3.Can you accpet OEM? Yes. we offer OEM service. 4.Can you provide the MSDS(material safety data sheet) report? The MSDS report are important for shipment(custom clearance),so we will provide this after the order confirmed. contact us Nacywen whatsapp:+8615683235618 wechat:18907004602 Email:sk003@skaln.com
Tya lubricant oil process machine Tya series purifier solely designed for lubricating oil is made according to nature of high impurity of lubricating oil including hydraulic oil and mechanical oil, which has features of short time for treatment and high efficiency, enabling fast removal of oil's water, gas, impurity and volatiles such as alcohol, gasoline and ammonia gas. Hence the quality of oil is improved, viscosity of lubricating oil, flash point and other performances are recovered which ensures a correct running of hydraulic system, power system and lubricating system. It is especially suitable for industries including petroleum, chemical, mine, metallurgy, power, traffic, mechanical manufacture and railway for the recovery and purification of various lubricating oil such as hydraulic oil, mechanical oil, cooling oil, refrigerating oil, gear oil, gasoline engine oil, diesel oil and heat treatment oil. Features 1) strong capability of removal of impurity, mass and deep precision purification material enable removal of tiny and fine particles in oil. 2) automatic reverse flush ability, which automatically cleans the mass impurity withheld by purifier. 3) advanced medium heat absorption and condensation system 4) pressure protection, auto heating temperature control, device of auto separation of condensate water, easy to handle, safe and reliable. 5) top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime. 6) unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil. 7) imported parts are used for all electric system, which ensures operation of the equipment with high performance 8) low noise oil pump specially made. Wooden case
Price : Rs 4 Lakh / Unit Minimum Order Quantity: 1 Unit Brand : Eicher Lube Oil Consumption ; 0.1% of fuel consumption Power Factor : 0.8 PF Frequency : 50 Hz Bore X Stroke : 100 x 105 mm Alternator Type : Self Regulated/Self Excited/Brushless Engine Model ; EE483TCI Displacement : 3.3 L Compression Ratio : 1701 Electric System : 12 V DC Insulation : Class H Lube Oil Capacity Approx : 500/12 Hours/Months Governor Mechanical Genset Rating 40 kVA/32 kWe Engine Rated Powez ; 52 HP No of Cylinders : 4 Nature of Aspiration ; TCI Lube Oil System Capacity : 11 L No of Phase : 3 Phase/1 Phase Matching up with the ever increasing requirements of the customers, our company is engaged in providing 40 kVA Eicher powered Diesel Generator. Features of Genset Powered by Eicher branded Engine: Low Operating Cost: Remarkable Fuel Economy Longer Service Interval Economical Spare Parts Pricing No Running-In period Superior Up Time: Robust Design: Proven in toughest application like Construction Equipment, Material Handling, Marine and Agro. In Built Oil Cooler: Suitable for Continuous operation Bypass Filter Unmatched Engine Protections: LLOP, HWT, Air Filter Chocking, CAF Piston Cooling Jet Better Metallurgy: Ensures longer maintenance period & overhauling period Longer product life cycle Price Range :Rs. 300000-400000/Unit
General features: man engine¡ê¡§d2842le201); radiator 40 oc max, fans are driven by belt, with safety guard; 24v charge alternator; alternator¡ê¡§marathon mx-600-4), single bearing alternator, protection class ip22, insulation class h/h; absorber; dry type air filter, fuel filter, oil filter; main line circuit breaker; standard control panel; two12v batteries, rack and cable; flexible exhaust bellows, exhaust elbow, flange, muffler; user manual. Open type with base fuel tank:overall size:3200mm*1135mm*1954mm; weight:2760kg; soundproof type:4600mm*1580mm*2500mm;weight:4760kg
Diesel generator 100kw cummins diesel generator Model: cd-c 100kw (silent type) Power by cummins engine Continuous power (50hz): 100kw/125kva Standby power (50hz): 110kw/137kva Engine model: 6bta5.9-g2 Engine power (50hz): 110kw Speed: 1500rpm Engine configuration: 6-cylinder in line. 4-strokes, exhaust gas turbocharged, direct spray fuel system. Engine cooling mode: the radiator suitable for 40¿¼ c temperature, strap drive the cooling fan with protection cover. Speed control system: mechanical speed controller, electricity-magnet valve control switch(optional) Start model: 24v direct current start Engine filter system: dry air filter type, fuel filters, lube filter. Engine total displacement: 5.9l Compress ratio: 17.5: 1 Boreí+ stroke: 102í+ 120 Specific fuel consumption: íG 220g/kw. H Lubricating oil consumption: íG 1.36g/kw. H Oil capacity: 13l Coolant capacity: 27l Alternator model: brushless 100kw Alternator power: 100kw/125kva Rated voltage/frequency: 380v/220v 50hz Power factors: 0.8lag Phase: 3-phase & 4 line Stable voltage regulator: íG í+ 3 Insulation class/protection grode: h class/ip 23 Dimension: 2800í+ 1100í+ 2100 with base fuel tank Weight: 1500kgs
Dongfang Yoyik Engineering Co., Ltd is specialized in producing, manufacturing and selling industrial spare parts, as well as providing products of famous brands. Since 1989, our products have being widely used in various industries from power, oil, chemical, electronic, gas to environmental protection, fire-fighting equipments and nuke industry. glass fiber board 3240 No.1 Vulcanized fiber board 1.5 1Q7084 No.40 sealant WH-53351JG HR anti-corona varnish 1244 sealing grease 750-2 generator end cap Hydrogen sealing Sealant T20-75 grease gun KH35 room temp curing insulating adhesive 132 Neoprene rubber adhesive Steel plate paper 1.5*900*1200 PET sleeve fiberglass strip Ï?3 oil sealing & oil baffle cover glass cloth tube 3640 sealant injector KH32/3Q3358-9 room temp curing coating adhesive HDJ-102 4:1 glass fiber board 3240 High resistance Semiconductor varnish HDJ-26 heavy sealant injector 5D463.338 T15A Polyester fiberglass tape 2440 0.1*25 grease gun nozzle 5D463.338 T15C HR anti-corona varnish DECJ1345 room temp curing solvent-free varnish 841 sealing grease WH53351JG grease gun KH-32 High resistance Anticorona tape HEC51614 electrical insulating board 100/100 1Q4858 No.38 epoxy adhesive 841 (A+B) insulating washer 3Q4457 steam cooler sealing gasket stator slot wedge 4Q9190 insulating sleeve 4Q8522 fiberglass tape Low resistance Anticorona tape HEC51612 insulating taper pin assembly 4B4050 brushing dipping adhesive HDJ-16 glass fiber board 3240 ã??2019-11-28-DFJerryã??
Specification: Engine type: single cylinder, water-cooled, 4-valve, sohc, four stroke Start method: electric Displacement (ml): 598.6ml Rated power: 30kw(6500rpm) Max torque (n. M/r/min): 51 n. M (4500rpm) Lowest oil consume: 4 (l/100km) Spark plug: cdi Clutch type: main clutch type: wet hoof-chips; assistant clutch type: wet multi-chips Gearshift mode: 5 gears, 1 n 2 3 4 5, unaided reverse gear Fuel type: above rq-93 gb17930 Lubrication: depress splash Carburetor mode: backup vacuum carburetor Break type (front / rear): disk / disk Brake distance: 30km/h
As one of the leading Steam Turbine Manufacturers in India, NCON is always looking for team members who demonstrate a passion for serving our customers. About NCON Turbines: NCON Turbine Manufacturing Company was established in 1987, and due to the many advantages, we have, including increased efficiency, the implementation of stringent carbon emission norms and cost reduction offered by the use of these turbines, turbine demand is expected to increase further in the next few years. As a leading low-pressure and back-pressure steam turbine manufacturer, NCON Turbo Tech serves as India's premier manufacturer and supplier of steam turbines. The company has been manufacturing world-class steam turbines for over 30 years. How does our engineering production concentrator steam turbine work? 1. Saturated steam turbines are available in single-stage or multi-stage options. Primarily, this type of steam turbine is used as a reducing station between the boiler unit and the process steam header unit. 2. Most of the concentrated steam turbine manufacturers work in industrial plants that generally require large amounts of energy. 3. Our concentrated steam turbine manufacturers have designed a type of steam turbine used in connection with industrial processes where low or medium pressure steam is required. Other steam turbines are also available from manufacturers in India @ nconturbines.com. 1. Steam Turbine Suppliers 2. Small steam turbines 3. Power Turbine Manufacturers 4. Low pressure steam turbine manufacturers 5. Back pressure steam turbine manufacturers 6. Steam Turbine Power Plant Our complete steam turbine manufacturers in India specialize in providing steam turbine installation and repair services at reasonable prices. Hire us today!
1) Product Introduction Glass beads for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be� blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity. 2) Product Specification Main products specification for sandblasting according to following table: No. Diameter(um) Corresponding sieve size 1 850-425 20-40 2 425-250 40-60 3 250-150 60-100 4 150-105 100-140 5 105-75 140-200 6 75-45 200-325� You can choose different size glass bead between 45um-850um according to different function. � High Strength Glass Beads (for Blasting) With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing. Other purposes of the products are as follows: 1.� Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion. 2.� Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc. 3.� Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering 4.� Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts 5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair 6.� Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts. � High Strength Glass Beads for blasting Type Mesh Grain Size �¼ m 30# 20-40 850-425 40# 30-40 600-425 60# 40-60 425-300 80# 60-100 300-150 100# 70-140 212-106 120# 100-140 150-106 150# 100-200 150-75 180# 140-200 106-75 220# 140-270 106-53 280# 200-325 75-45 3) Technical references Appearance: Clean and transparent, no visible bubbles and impurity. Density:2.4-2.6g/cm3 Hardness:6-7(Moh's) Spherical beads: 75% SiO2 content: 72% 4) Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25±0.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is paper-plastic compound bag to prevent leak or damp. The net weight of each is 25±0.2kg. 3.According to clients' requirement.