ARSPL UPVC ROOF SHEET 1) Heat insulation up to 40%. Excellent Thermal Insulation: Thermal Conductivity 0.104 W/m* C 2) Excellent sound insulating properties 3) Resistance to acids, alkalis, salts and solvents, corrosion 4) Resistance to the extreme weather conditions: snow, hail, high wind â??pressure 5) High Strength Characteristic: Tensile Strength 29~31 MPa, Flexural ` strength 45~55MPa, Impact Resistance 50~60kJ/m2 6) Temperature usage Range: from -40 C to +75 C. Material `withstands over 100 cycles of freezing and thawing 7) Color Fastness: Pigments used are 8 points on the BW Scale 8) Light Weight: 3.6Kg/m2 9) Resistance to the influence of ultraviolet rays. Highly UV protected. 10) Non-combustible nature of the material. Class B1 Retardant Building Materials. Fire Retardant. 11) Easiness of installation: material can be easily cut, drilled, and sawn 12) Absolute waterproof properties 13) Flexibility: material allows roofing of hanger-type structures and spherical fencing 14) Economical Installation: overlapping waste doesnâ??t exceed 8%. High utilization efficiency up to 95% 15) Availability of the same profile transparent sheets for the creation of sky-- lights. 16) Wide Variety of available colors. Good aesthetic appeal. 17) Cost-effective in installation and saves construction costs up to 70%. 18) Eco-friendly & Energy Efficient Green product. 19) Non-Carcinogenic 20) Increases labor productivity and machinery efficiency 21) Non-conductor of electricity. 22) Long life 23) Compulsory for some industries like chemical, pharma, fertilizer, leather, process, etc.
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Greetings, We are API-IV LTD - a small family-owned honey manufacturer from Bulgaria. Bulgaria is known for its wonderful nature and production of maybe the best honey in the world. We produce high quality eco-friendly honey which is not only completely natural and delicious, but also serves great health benefits. Our honey is polyfloral. We do not offer individual herbs or flowers. Unlike other honey found in stores, our honey remains unfiltered, unpasteurised and untreated (lacks harmful chemicals often found in other honey) which makes it the best choice for every family. We are looking for a wholesale buyer of this years fresh and delicious honey - quantity around 30 000 kg (30 tons), either in jars (different sizes depending on buyers choice) or tins (25kg each). We have certificate for world wide export as well as all the quality assuring certificates. For potential buyers we offer samples and authenticity and traceability analysis certificate. The prices depend on the amount wanted, jars or tins, delivery etc. We offer best prices in Europe. Contact us for: - best prices for highest quality honey - easy communication - long-lasting business relationship with family owned businesses Thank you in advance.
(1) Diesel engine for generator use (2)Diesel engine for water pump use 2 Diesel engine spare parts (1)Diesel engine for generator use 代表å?¾ç??ï¼?495D Type Cyliner/Bore/Stroke Intake Method Combustion Type Rated Output/ Speed Min. Fuel Consumtion Net Weight (mm) (Kw/r/min) (g/kw.h) (kg) 495D 4/95/115 Natural Aspirated Turbo Method 26.5/1500 246 380 495D2 4/95/115 Natural Aspirated Turbo Method 30/1800 246 380 K4100D 4/100/115 Natural Aspirated Turbo Method 30.1/1500 246 380 K4100D2 4/100/115 Natural Aspirated Turbo Method 34/1500 246 380 K4100ZD 4/100/115 Turbocharged Turbo Method 42/1500 235 390 K4100ZD2 4/100/115 Turbocharged Turbo Method 45/1800 235 390 N4102D 4/102/120 Natural Aspirated Direct Inject 36/1500 235 380 N4102ZD 4/102/120 Turbocharged Direct Inject 48/1500 230 390
Work gloves made of welder / suit, grey / beige, full cowhide and split leather combined, completely made of leather, 35cm cuff, double seam, fully lined, India quality Abrasion resistance: 3 Area of application: Logistics / Commission, Craft / construction, Innovation / New, Agriculture / forestry / garden and landscaping construction, Discount / self-service area / DIY, Be natural / sustainability, Technical trade / industrial needs Colour: grey beige Cuffs: On the pole Cut resistance: Power level X Leather sorting: A leather sorting Leather thickness: 1,0 - 1,2mm Material: Welder Puncture strength: Power level 2 Size: 11 / XXL Surface texture: smooth / roughened Tear strength: 3 Type / quality: Combi Cut resistance: 1
Our High Quality Natural Cocoa Powder is derived from the finest cocoa beans sourced from Indonesia, known for their exceptional quality. With a fat content of 10-12%, this cocoa powder delivers a rich and pure natural cocoa flavor, perfect for various applications in the confectionery, bakery, and beverage industries. General Specifications Origin : Finest Cocoa Beans from Indonesia Fat Content : 10-12% Color : Natural Brown Flavor : Rich and Pure Natural Cocoa Flavor pH : 5.0 - 6.0 (natural, not processed with alkali) Moisture : Maximum 5% Ash Content : Maximum 8-10% fat content (dry basis) Particle Size : Fine, typically between 50-100 mesh Microbiological Contamination Salmonella : Negative E. Coli : Negative Applications Suitable for Confectionery, Bakery, and Beverage Industries.
Description Wood powder charcoal briquettes (sawdust charcoal briquettes) Hexagonal Briquettes Wood powder charcoal sawdust charcoal type (Grade AB processed sawdust charcoal) Outer diameter: 5cm (flower shape) - Hole diameter: 0.9 to 1 cm - Length: 10-20 cm - 100% organic ingredients - No smell - No smoke - Non-toxic -The embers are stable and hot - The rest of the burning ashes can be immediately disposed of anywhere because they are non-toxic. Burning Power: 7-9 hours active - suitable for BBQ, restaurant, seafood, livestock industry can replace fuel from coal. Specification: Moisture: 6.70% Ash Content: 5.96% Volatile Matter: 15.49% Fixed Carbon: 71.05% Calorie value: 6800/cal
Description Wood powder charcoal briquettes (sawdust charcoal briquettes) Hexagonal Briquettes Wood powder charcoal sawdust charcoal type (Grade AB processed sawdust charcoal) Outer diameter: 5cm (flower shape) - Hole diameter: 0.9 to 1 cm - Length: 10-20 cm - 100% organic ingredients - No smell - No smoke - Non-toxic -The embers are stable and hot - The rest of the burning ashes can be immediately disposed of anywhere because they are non-toxic. Burning Power: 7-9 hours active - suitable for BBQ, restaurant, seafood, livestock industry can replace fuel from coal. Specification: Moisture: 6.70% Ash Content: 5.96% Volatile Matter: 15.49% Fixed Carbon: 71.05% Calorie value: 6800/cal ready items can directly order kontak: wa.me/+6285723128636
High-performance laser machine designed for efficient cutting and engraving in industries such as Footwear, Apparels, Electronics & Embroidery. With its advanced features and precise control technology, it offers exceptional speed, accuracy, and versatility, making it an ideal choice for large-scale cutting and engraving applications. Single Head Configuration: This machine is equipped with Single laser head, enabling simultaneous cutting or engraving operations. It maximizes productivity by reducing processing time and increasing efficiency. High-Speed DSP Control: The machine utilizes advanced 64-bit high-speed DSP control technology, enabling continuous and fast curve cutting. It optimizes the processing route for improved efficiency and shorter production time. Stable and Precise Cutting: The three-way reflective system and 6-balanced sliding type guide rails ensure stability and precision in both cutting and engraving processes. Wide Range of Materials: The machine is suitable for working with various non-metal materials, including cloth, leather, acrylic, rubber, wood, paper, ceramics, and more. Characteristic BS-6040 BS-9060 BS-1490 Model No. BS-6040 BS-9060 BS-1490 Engraving Area 600 mm x 400 mm 900 mm x 600 mm 1400 mm x 900 mm Cutting Speed 0-800 mm/min 0-800 mm/min 0-800 mm/min Laser Power 80 W 80 W 100 W Resolution 0.025 mm 0.025 mm 0.025 mm Positioning Precision
Metal tube tube CNC plasma cutting machine is mainly used for cutting all metals, including but not limited to aluminium sheet, iron sheet, galvanized (steel) sheet, mild steel, titanium sheet. stainless steel, iron etc. Applies in cars, motorcycles, pressure vessels, chemical machinery, nuclear industry, general machinery, engineering machinery,steel structure, shipbuilding and other industries. Features of Metal tube tube CNC plasma cutting machine 1. This plasma cutting machine is used for metal square & round tube tube cutting. Good man-machine control panel makes operation more convenient and simple, can cut kinds of complex shapes' metal sheet. 2. The liner rails are imported with high precision, good guide. Rack gear is manufactured by professional factory. Its surface is carbonizing and quenching. 3. LCD operate panel can prompt kinds of operating ways, so operator can operate it easily after simple training. 4. Driving system is LEADSHINE or YASKAWA servo drive (Dual Driver makes it fast), you can choose China LEADSHINE , Japan Panasonic /YASKAWA servo motor or stepper motor to make sure whole machine can run with smoothly in a wider speed range, short acceleration time 5. Torch height controller can adjust the best cutting distance automatically, to confirm working piece high precision cutting. 6. Automatic plasma machine Chuck rotary makes work efficiency Parameters of Metal tube tube CNC plasma cutting machine No. Description RB6020T (Length is 6000mm,Diameter is 100-400mm) 1 Working Size 200(Diameter)*6000mm(Length) 2 Z Axis Clearance 150mm (200 And Higher Is Optional) 3 Table Type Chuck rotary (Automatic + Dual Driver) 4 Transmission System Rack Pinion And Hiwin Linear Rails For X/Y 5 Driving System Leadshine Servo motor ( YASKAWA / PANASONIC is optional, also according to your needs and budget.) 6 Max. Cutting Speed 12000mm/Min(different configuration and different material and thickness speed is different) 7 Max. Travelling Speed 30000mm/Min(different configuration speed is different) 8 Working Voltage 380V/3ph(220V/3ph is optional) 9 Plasma Generator Huayuan China and USA power as your requirements 10 Arc Mode FANGLING 11 Output Current 63/100/120A/160A/200A� China (45/65/85/105/125/200A USA) 12 Max. Cutting � Thickness 6/15/18/20/30mm (This is approximate, It also according to power and kinds metal) 13 Operating System JiaoDa fangling FX430A controller (Professional for tube cutting) 14 Working Material Steel, Aluminum, Galvanized Sheet, Titanium Plate,  Platinum Plate  and almost all of the metal� square tube/Circle tube
Raw & Bulk Acacia Honey. 100% acacia crassicarpa nectar. Hight Quality Natural Honey of Indonesia Water Content : 18-21% Color : Dark Amber Packing : 50 Kg/ Jelly Can ( custom ) FOB/CIF Payment : T/T, LC
We are a company dedicated to the production of 100% natural honey without any additives, totally pure. From the Argentine pampas, the second largest honey producer in the world reaches a floral honey of medium or medium dark tone. Packaged in 250Gr, 500Gr and 1KG containers. -No wheat certificate WE DO PRIVATE LABEL
Passion Fruit Pure Juice Concentrate (100% Organic) available on 3 variant : without sugar, less sugar, and lots of sugar. Weight on bottle packaging is 1.2 Kg and we can supply 3 tons / day. Our products are natural without preservatives, and we will bring the image of the taste of North Sumatra to your heart.
The key characteristic of sheer curtain fabric is its semi-transparent nature. This is achieved through a loose or open weave, which spaces the threads further apart, allowing light to pass through. The sheer curtains we offer are made from either 100% Polyester or a blend of 50% Linen and 50% Polyester.
The key characteristic of sheer curtain fabric is its semi-transparent nature. This is achieved through a loose or open weave, which spaces the threads further apart, allowing light to pass through. The sheer curtains we offer are made from either 100% Polyester or a blend of 50% Linen and 50% Polyester.
Ingredients: Soursop, sugar, 100% Natural, do not use genetically modified fruit Do not use any auxiliary preservatives and flavorings Shelf life 6 months Qualified, has announced the health department Clean material source, Soursop seed has the highest nutritional value in soursop variety.
100% natural coconut water is produced by UHT method before filling into Tetra Prisma Aseptic with 1L box or 330ml box. Apply for drinking as beverages and cooking. Shelf life: 12 months Packing: 1L box x 12/carton or 330ml x 24/carton