>=100 Gallons US$ 1.99 Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons US$ 1.99 Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 US$11.50 Shipping: Support Sea freight Payments:This supplier also supports L/C payments. Place of Origin: ; AE-United Arab Emirates Usage: : Building Coating, Texture Paint for State: Liquid Coating, Liquid Coating Main Raw Material: Acrylic Application Method: Brush Brand Name: Regent Paints Packaging & Delivery Port Jebel Ali Lead Time : As per your requirements Product Description Main Raw Material Acrylic Brand Name Regent Paints Application Method Brush
Mono Coat Egg Shell Latex - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Paints Mono Coat Egg Shell Latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints Mono Coat Egg Shell Latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Mono Coat Egg Shell Latex. PROPERTIES Colour : Full range - as per shade card Finish : Egg Shell Solids(Volume) : 52% and above Specific Gravity : 1.27 +/- 0.1 Theoretical Coverage : 350 â?? 450 sq. ft. per gallon DRYING TIME :â?? AT 25 �° T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic Copolymer
ACRYLIC TOP COAT it is an acrylic resin based premium top coat for metals. It has exceptional color and gloss retention in a variety of climatic condition. PROPERTIES Colour : full range Solids: 38 + 2 % Theoretical Coverage 9 â??12 m2/Lit Recommended (Dft) : 30 - 40 Microns/ per coat Recommended (Wft) : 90-100 Microns/ per coat DRYING TIME â?? AT 25 �° Surface Dry: 5-10 mins To Recoat: 3 â?? 4 hours Vehicle type: Modified alkyd Specific gravity: 1.15 �±0.05 (depends on color)
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 �± 2% Specific gravity 1.40 at 25�° C Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M) DRYING TIME :â?? AT 25 �° T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Flash Point: 35�° C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion. PROPERTIES Gloss level: matt (ISO 2813-78) Solids: 25% (+/- 2 %) Viscosity: 22000 cps @25 �°C Brookfield 4/4) Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u) DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: 24 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Specific gravity: 1.03 (+/- 2%) Flash point: Inflammable liquid.
Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 8 m2/ lit Curing time: 15 - 20 hours at 25 C Full cure: 7 days Flash point 22C (ISO 367 - 83) Specific gravity: 1.35 when mixed A+B Pot life: 8 hours at 25�¯ Mixing ratio: 4 parts base A: 1 part hardner B Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Cpvc And Pvc Pipe And Fittings, Water Tank, Cp Tap Fittinges, Ewc Comouds, Paint Items, Hardware Items Etc.
we supply 1,colour matching of 2k,1k base coat and pearl,silver,primer,putty,clear coat,hardener the fully series from 1st to the top coat for automotive paint 2,additionally,we can also supply Enamels NC paint for industrial usag 3,with decades of experience our matching team can provide you the best price and result. We are looking for car refinish distributors, pls join us to get the mutual benefits!
Brighto Acrylic Matt Emulsion Paint Price : 0.90 Ltr - USD 3.1 3.60 Ltr -USD 8.2 18 Ltr- USD 35.1
Turmeric, red dry chilli, parboiled rice, cumin seeds, black pepper, red chilli flakes, spices, lubricants, rice bran oil, soybean oil, olive oil poultry feeds,, animal feed.
Petrochemical products, petrochemical equipment, polypropylene, lldpe , hdpe, urea 46%(granular/prilled) bitumen vg 40 , petroleum bitumen, fuel cst 380, rpo, lubricants motor oils (low to medium tier) grease (calcium nlgi 3) green rubber, crude oil ,base oil , gas oil , granule sulfur, methanol, acid acetic , meg, deg, teg, peg, mea, dea, tea, dpg .lab .hab.Logistics and supply chain
Diesel en590, jet a1, gasoline, fuel oil, lubricant oil, urea 46%, bitumen 60/70, gas. aluminium, copper, gross minerals, noble metals korean cosmetics. fresh fruit: pomegranate, oranges, mandarin, tangerine, lemon, cherry, grapes, strawberry,... (origin turkey, south africa, philippines, chile).
Liquid adblue, urea for agricultural, technical grade urea for adblue, anhydrous ammonia, base oils, lubricants, paraffin wax, labsa, rock phosphate, npk, ammonium nitrate, polypropylene, en590, jet a1, chemicals, construction materials.
GI Conduit is a pipe used to protect and route electrical wiring in a building or construction. It provides very good protection to enclosed conductors from impact, moisture, and chemical vapors. Specifications We can Supply ERW Stove Enameled Rigid Steel Conduit pipes ( Medium protection) as per ISI 9537, Part II/ 1981 and Hot Dipped Galvanized Rigid Steel Conduit pipes ( High Protection) as per ISI 9537, Part II/ 1981. Size in outer diameter 20mm, 25 mm, 32mm, 40mm,50mm Wall Thickness 16 SWG(1.40-1.80MM) and 1.40 SWG(1.60-2.20 MM)
Description Two-component Air Drying Acrylic Aliphatic, Non Yellowing polyurethane finish coating. Recommended Use :- This product has excellent weathering resistance additionally it offers excellent resistance to various industrial chemical fumes and splash. This product is recommended as topcoat with suitable primers and undercoats for use in High Chemical & Saline atmosphere for better aesthetics and corrosion resistance in Chemical, Fertilizers, Petrochemical, industrial plants and also for premium industrial equipments. Not recommended for immersion application. Physical Data COLOUR : Industrial Shades FINISH : Glossy / Semi-glossy SOLIDS BY VOLUME : 40 + 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / ltr @ recommended DFT of 30 FLASH POINT : Base : Above 23 C Hardener : Above 23C DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a topcoat, which is applied over, primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged epoxy / PU coating should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base: Hardener - As per our recommendations APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : Type 290 POT LIFE : 4 hours min at 30C RECOMMENDED DFT : 30- 40 . OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
We are supplying Turpentine oil . Turpentine oil used for thinning of enamel paints and primers .