SELL LED,JFET,Modules,Rectifier bridge NEW AND ORIGINAL
Product Description 4/8E PDH is developed based on the VLSI chips. Relying on the advanced multiplexing technique, 4/8E PDH realizes 4/8 E1 and 100Mb/s fast Ethernet transmission with the function of Auto-Laser-Shutdown (ALS,optional). Technology Characteristics -> Transmits 4/8 E1 and one wire speed Ethernet -> Line bit rate is 150Mb/s -> Complies with ITU-T G.703 on interface and G.742, G.823 on jitter performance -> Complies with ITU-T G.802.3 on Ethernet interface and supports auto-negotiation for 10M/100M and half/full duplex working mode -> Supports VLAN and pause follow control for Ethernet -> All necessary alarm functions, supervises the status of remote terminal -> Supports E1 tributaries loop back for network fault diagnostics -> Supplies standard order wire telephone -> Supplies one customer RS232 data channel -> Supplies RS232 for equipment management -> AC 220 or DC-48 is optional -> Single board design, 1U, and 19 Inch standard Optical interface: -> Transmit Mode : Single/ Multi-mode -> Module : Single/Double Fiber -> Interface : FC/SC/ST -> Wavelength : 1310nm/1550nm -> Distance : 2Km/40Km/60Km/120Km E1 interface: -> Bit rate : 2.048Mb/s , í+50ppm -> Impedance : 75ª+ unbalanced(Declaration is needed if 120ª+ balanced required) -> Coding: HDB3, according to ITU-T G.703 -> Jitter: complies with ITU-T G.823 and G.742. Seeing appendix Ethernet interface: -> 10M/100M through auto-negotiation -> Full/Half duplex through auto-negotiation -> Connector: RJ-45 -> See appendix for Throughput, Packing error rat, Delay, and others Order wire interface: -> Phone set: Standard 2-wire phone set -> Bandwidth: 64Kb/s -> Coding: PCM RS232 for management: -> Bit rate: 9600b/s -> Data width: 8bits -> Stop bit: 1bit -> Parity check bit: None -> Connector: DB9 (pin) RS232 for customer data channel: -> Bit rate: í_250kb/s -> Connector: DB9(pin) General characteristics -> Power : 220Ví+20% , -36 ~ -72V -> Power Consumption : < 5W -> Environment Temperature : 0íµ-50íµ -> Size : 483í-200í-44mm -> Net Weight : 2.5Kg
Desktop and web interface model version User friendly HR modules. Payroll module customizable for Senegal.
Led modules 20*30*20
Electrical actuator (modulating type) Model: kst-02, 05, 10, 20, 40, 60, 100 Torque scope: 50-1000 n.M Working range: 0-360 Ambient temp.:-30c~+60c Cover:aluminum alloy Protection class:ip68 Voltage:24v ac, 24vdc, 110vac, 220vac, 380vac Type: on-off, regulating, passive contact Pc to foam box, foam box to carton box, then to plywood case
This ultrasonic sensor provides a easy method for distance measurement, with a 3cm to 4m detecting range, it is widely used in robotics applications and is also useful in security systems or as an infrared replacement. Description: This ultrasonic sensor is a non-contact distance measurement module Electronic brick compatible interface and breadboard friendly Dual transducer, three-pin on board (vcc, out and gnd) Designed for easy modular project usage with industrial performance Specifications: 6 x 2 x 1.3 cm (pins not included) 100pcs/carton Net weight: 8.10g Dimensions: 26 x 22 x 19cm
BF-630 is one of CHIYU Technology's Fingerprint, single door access controller with Web Bbased. Ideally, BF-630 is used to manage entrance security or a small office as a simple time attendance recorder with Fingerprint or RFID and Password. IP Based with embedded Web Server Optical based fingerprint sensor Lower power consumption, OSD menu (On Screen Displayer) Voice indication module option Fire Alarm/ Door Sensor USB device option (for logs extraction) Double Badges and Interlocking Anti Pass Back unlimited levels Fingerprint + Pin/ Card + Password/ Lock Release/ Exit button Time zones 50 Holidays/ 40 Function Keys/ 32 Departments,Designations, Groups 64 Time Sets and Time Zone ► Technical Specification Verification Option Fingerprint Fingerprint + Card Fingerprint + Pin Card + Pin Fingerprint + Card + Pin Verification Mode 1:1 /1:N Verification Time Less than 2.0 sec Registration Time Less than 3.0 sec Capacity 950 persons, totally 1900 templates (2 templates/ Users) Log Data 32,768 System Log 2,000 Relay Output 2 Reset Button 1 Sensor Input 1 Communication Interface RS-485×1 →Relay Box (BF-20/ BF-50) TCP/IP (Reserved for internetworking) WG In & Out 26/ 34 bit Communication speed Ethernet 10/100M, Auto crossing Card format 125 KHz (EM/TM) 13.56 MHz Reading Range 7 ~ 12cm (EM/TM) 3 ~ 5 cm (Mifare) Language Traditional/ Simple Chinese/ English Keypad 10 numeric keys (0~9) + 6 function keys (F1~F4,#,*) & 1 Door Bell Display 128 × 64 Dots LCD Operation Temperature 0℃~ 65℃ Operation Humidity 5% ~ 95%RH Dimension 125 × 145 × 33 mm Weight 360 g.
IC's, semiconductors, avtive/passive components, led's, lcd's, memory (flash, sram, dram, ddram, eprom, eeprom, modules, sticks) connectors, relays, switches, for production, spares, mro and engineering purposes.
ICs, diodes, transistors, mosfets, igbts, capacitors, LEDs, displays, LCD modules, resistors, semiconductor, active components, passive components, industrial electronic components, SMD, inductors, crystals.
Smart key(passive keyless entry) system, car dvr, car jump starter, central locking system, remote keyless entry(rke) system, body control module.
Prop pins 20 ft containers
The Vehicle Commnication Module (VCM) is a high performance, ruggedized, vehicle serial communications gateway. This device provides multiple vehicle serial communication interfaces to meet the requirements of all Ford Motor Company vehicles. The VCM unit is housed in a magnesium enclosure with a tough, protective, plastic cover for the PCMCIA expansion slot which can, for example, be used for wireless LAN cards or memory expansion. The VCM device contains five LED status indicators to provide the user with a visual mode of internal VCM, vehicle, and host device (e.g. NGS Classic's T-Handle, PC, Pocket PC/PDS, and Laptop/IDS) operation. The VCM also has detachable cables for connection to industry standard high-speed host interfaces as well as to the vehicle under test. The VCM (Version V62) includes both IDS (Integrated Diagnostic Software) and PDS (Portable Diagnostic Software) tools. Diagnostic coverage includes most 1996 ~ 2009 MY (produced 1995 ~ 2009) Ford, Lincoln/Mercury & Mazda vehicles. Application Overview Integrated Diagnostic Software (IDS) is the next generation diagnostic tool. IDS integrates WDS software modified to run on an off-the-shelf laptop with the Vehicle Communication Module (VCM) currently used in NGS+ and PDS, and a new Vehicle Measurement Module (VMM). Vehicle Diagnostic Connectors The VCM 16-pin DLC cable is used to connect the VCM to the vehicle. The VCM and VMM connect to the laptop through the Ethernet-USB Adapter Cable (H406/H416). Interface Devices The interface devices that are used with this application are: VCM Vehicle Communication Module This device provides all link based functionality including: Data logger, Self test, Service Functions, Module Configuration and Programming, etc. VMM Vehicle Measurement Module This device provides the following functionality: Oscilloscope, Digital Multi-Meter, Ignition System Test, Fuel System Test, and SGM. Note that the application will detect the interface device that is connected to the laptop. Indicator icons will appear at the bottom right-hand corner of the IDS screen when the VCM and/or VMM are connected. IDS VCM Accessories: Vehicle Communication Module (VCM) 16-Pin DLC Short Cable 16-Pin DLC Long Cable IDS 4m PC Ethernet-USB Host Cable DVD(Ford/Mazda) DVD(Land Rover/Jugar). Product Name: Ford VCM IDS Part No.: A109 Net Weight: 5KG .
The Vehicle Commnication Module (VCM) is a high performance, ruggedized, vehicle serial communications gateway. This device provides multiple vehicle serial communication interfaces to meet the requirements of all Ford Motor Company vehicles. The VCM unit is housed in a magnesium enclosure with a tough, protective, plastic cover for the PCMCIA expansion slot which can, for example, be used for wireless LAN cards or memory expansion. The VCM device contains five LED status indicators to provide the user with a visual mode of internal VCM, vehicle, and host device (e.g. NGS Classic's T-Handle, PC, Pocket PC/PDS, and Laptop/IDS) operation. The VCM also has detachable cables for connection to industry standard high-speed host interfaces as well as to the vehicle under test. The VCM (Version V57) includes both IDS (Integrated Diagnostic Software) and PDS (Portable Diagnostic Software) tools. Diagnostic coverage includes most 1996 ~ 2009 MY (produced 1995 ~ 2008) Ford, Lincoln/Mercury & Mazda vehicles. Application Overview Integrated Diagnostic Software (IDS) is the next generation diagnostic tool. IDS integrates WDS software modified to run on an off-the-shelf laptop with the Vehicle Communication Module (VCM) currently used in NGS+ and PDS, and a new Vehicle Measurement Module (VMM). Vehicle Diagnostic Connectors The VCM 16-pin DLC cable is used to connect the VCM to the vehicle. The VCM and VMM connect to the laptop through the Ethernet-USB Adapter Cable (H406/H416). Interface Devices The interface devices that are used with this application are: VCM Vehicle Communication Module This device provides all link based functionality including: Data logger, Self test, Service Functions, Module Configuration and Programming, etc. VMM Vehicle Measurement Module This device provides the following functionality: Oscilloscope, Digital Multi-Meter, Ignition System Test, Fuel System Test, and SGM. Note that the application will detect the interface device that is connected to the laptop. Indicator icons will appear at the bottom right-hand corner of the IDS screen when the VCM and/or VMM are connected. IDS VCM Accessories: Vehicle Communication Module (VCM) 16-Pin DLC Short Cable 16-Pin DLC Long Cable IDS 4m PC Ethernet-USB Host Cable DVD(Ford/Mazda) DVD(Land Rover/Jugar).
QSFP28-100G-CWDM4-T02 Optical Transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed, and passed on to four laser drivers, which control four CWDM with 1271, 1291, 1311, and 1331 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector. On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface.
Description of low power high performance of low cost wifi module price Dl2103b is designed as a wifi module based on atheros 4004 it has ultra-small Size and supports smd the module works as an iot node and has been widely used In iot appliances Applications of low power high performance of low cost wifi module price Smart gateway Iot products Consumer electronics Smart home appliances Industry control Remote device monitoring Features of low power high performance of low cost wifi module price Support 2 4ghz 802 11b g n with sta ap mode Support wep wpa wpa2 psk encryption mode Support multiple network protocols Option on board antenna or external antenna Low power consumption Ultra small size support smd Support online firmware updating Srrc authentication Rohs compliant Datasheet of low power high performance of low cost wifi module price Wireless parameters Wireless standard 802 11 b g n Frequency range 2 412ghz 2 484ghz Transmit power 802 11b +15+ -2dbm 11mbps 802 11g +14+ -2dbm 54mbps 802 11n +13+ -2dbm ht20, mcs7 Receiver sensitivity 802 11b -93dbm 11mbps cck 802 11g -85dbm 54mbps ofdm 802 11n -82dbm ht20 mcs7) Antenna option Built in pcb pin External i-pex connector Hardware parameters Data interface Uart gpio Operating voltage 2 9v ~ 3 6v Operating current Consistently sending: peak ~200ma Normal mode average ~50ma, peak ~200ma Low power mode average ~10ma, peak ~200ma Operating temp -20 c 70 c Storage temp -45 c 125 c Dimensions and size 15mm x 30mm x 3.5mm Software parameters Network type Ap sta Security mechanisms Wep wpa-psk wpa2-psk Encryption Wep64 wep128 tkip aes Update firmware Local wireless, remote Customization Sdk supplied Network protocol Ipv4, tcp udp
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Compatible Cisco Form Factor QSFP+ Max Data Rate 44.6Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 5.5dB Media SMF Power Consumption
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyroelectric", or "IR motion" sensors. This PIR (Motion) Sensor can detect the infrared signals from human body or other animals and triggers with movement. So it can be applied to a variety of scenarios which require motion detection.Conventional pyroelectric infrared sensors require body pyroelectric infrared detector, integrated chipsets, complex peripheral circuit. So the size is slightly big, circuit is complex, and reliability is slightly lower.We bring this new pyroelectric infrared motion sensor which is specially designed for your Arduino projects, an integrated digital body pyroelectric and infrared sensor, with small size, high reliability, low power consumption, and simple peripheral circuit. Very simple to use in any project. Specification: 1. Input Voltage: 3.3 ~ 5V, 6V Maximum 2. Working Current: 15uA 3. Working Temperature: -20 ~ 85 ºC 4. Output Voltage: High 3V, low 0V 5. Output Delay Time(High Level): About 2.3 to 3 Seconds 6. Detection angle: 100 ° 7. Detection distance: 7 meters 8. Output Indicator LED(When output HIGH, it will be ON) 9. Pin limit current: 100mA 10. Connection Interface: PH2.0-3
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
