We have different Ring designs to suit customer specific socket design.
Sprinkler Pipe are generally made as per IS:14151. The said pipes require standard quality sealing products for leak proof performance.
UGDS Pipes are generally made as per IS:15328. The said IS prescribes usage of Rubber Rings as per IS:5382-1985.
Cast Iron Detachable (CID) joints are used to connect Asbestose Cement Pressure Pipes. These CID joints require Rubber Rings as per IS:12988 which prescribes quality of such Rubber Rings as per IS:5382-1985.
Mechanical Joint of Cast Iron Pipes require rings as per IS:12820 which recommends usage of Rubber Rings as per IS:5382-1985 Type IV.
Lip Seal are generally made as per BS EN 681:1996. The said standard is for pipe joint seals used in water & drainage application.
With 35 years of experience in Rubber Industry, Ashutosh Rubber has become a leading manufacturer of Rubber & PVC Molds for all types of Cement Concrete Products.
Ashutosh Rubber Pvt. Ltd. has various designs in PVC Moulds like Square, Colorado, Euphrates, Square with slot & Arrow.
We have PVC Molds in various designs.
PVC Moulds in different designs like Brooks, Parachute, Wave Square & Grass Paver.
Rubber Moulds For Manhole Covers
We invite you to fulfil your requirement of Moulds for Manhole Covers in a variety of designs and sizes.
Vehicle technical specification: Engine brand: Zongshen, water-cooled single cylinder, four-stroke Displacements: 250cc Forward/Re speeds: 4 forward, 1 neutral and 1 reverse Start mode: Electrical start Fuel capacity: 10L Vehicle speed: 3-10km/h Brake system: Front and reak brake disc Load capacity: 200kg Seats: 2 People Snow clearing technical specification: Area sweep (Max): 3600-26000 ã?¡/H Rear engine brand: Longcin 420cc, OHV, 4 stroke Power: 9.0kW/3600rpm Transmission mode: Electronic clutch Working width: 150cm / 59â?³ Brush diameter: 55cm / 21.7â?³ Brush rotate speed: 400rpm (max) Working head adjustable angle: Left 25 degrees, right 25 degrees Easy fast assembly: Yes Packing: Iron rack + wooden box Cer.for Europe: CE Standard PCS/Carton: 1PC/2Carton G./N. Weight: 600/500kgaVehicle technical specification: Engine brand: Zongshen, water-cooled single cylinder, four-stroke Displacements: 250cc Forward/Re speeds: 4 forward, 1 neutral and 1 reverse Start mode: Electrical start Fuel capacity: 10L Vehicle speed: 3-10km/h Brake system: Front and reak brake disc Load capacity: 200kg Seats: 2 People Snow clearing technical specification: Area sweep (Max): 3600-26000 /H Rear engine brand: Longcin 420cc, OHV, 4 stroke Power: 9.0kW/3600rpm Transmission mode: Electronic clutch Working width: 150cm / 59 ³ Brush diameter: 55cm / 21.7 ³ Brush rotate speed: 400rpm (max) Working head adjustable angle: Left 25 degrees, right 25 degrees Easy fast assembly: Yes Packing: Iron rack + wooden box Cer.for Europe: CE Standard PCS/Carton: 1PC/2Carton G./N. Weight: 600/500kg Carton size: 300*150*110cm Warranty: One year Carton size: 300*150*110cm Warranty: One year
It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 5 pieces of vacuum tubes as one unit. Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C.
AIR FORCE (19") 160CC HONDA HOVER MOWER Price:$468.90 SKU:F-19 Brand:Air Force Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Advanced Design With High Quality Materials Allows you to maximize time and effort for turf care needs Powerful 160cc Honda GCV 4-Cycle Engine Mounted in reverse to maximize oil lubrication to the engine Cup and dipper spashing system showers internal components High performance fuel pump ensures constant delivery of fuel Extra Strength Reinforcement 7-point engine mount with steel insert reinforcement Extra thick handle mounts are set low & wide for better stability 19-Inch, Injection-Molded ABS Mower Deck Coated for UV and chemical restistance Exceptionally strong yet lightweight deck enhances mower lift 14-Inch Lightweight Impeller Provides maximum lift and smoother mowing Operator Presence Control With Blade Brake Detects when operator releases their grip and cuts the engine Heavy Gauge Steel Handles 53" handle for maximum reach Padded for added comfort Not Recommended For Use On More Than A 45 Degree Angle Specifications Engine Engine Brand Honda GCV Starting System Recoil Start Engine Cycle 4-Cycle CC 160 CCs Fuel Tank Size 0.24 Gallons Engine Cylinders 1 Cylinder Oil Filter No Torque 6.9 Lbs Consumer Engine Warranty 2 Years Commercial Engine Warranty 90 Days Deck Blades 3 Blades Cutting Width 19 Inches Cutting Height .5-2.5 Inches Drive Drive System Push Overview Weight 38 Pounds Consumer Warranty 1 Year
TL-4 model Direct burning furnace with 3 layers sleeve consists of 3 layers of cylinders. It uses fully burned natural gas to obtain high-temperature flame, and mixing this temperature with fresh air to achieve the required hot air device. Due to the use of fully automatic single-stage fire, two-stage fire or modulating burner, the output hot air is extremely clean by natural gas fully burned, , meeting the drying and dehydration needs for most stuffs. The external fresh air enter the furnace body under negative pressure, takes two strokes and sequentially cools the middle cylinder and the inner tank. After being fully mixed with the high-temperature flame in the mixing zone, it is extracted from the furnace body and enter the drying room. When the temperature reach the setting number, the main burner stops working and the auxiliary burner continues to burn to maintain the temperature. When the temperature drops to the set lower limit temperature, the main burner will be run again. 4ã??Advantages/features 1. Simple structure and easy installation 2. Small air volume, high temperature, adjustable from normal temperature to 500â?? 3. Stainless steel high temperature resistant inner tank, durable 4. Automatic gas burner, complete combustion, high efficiency. (After setting up, the system can control the ignition+cease fire+temperature adjust automatic), 5. The fresh air has a long stroke that can fully cool the inner tank, so the outer tank can be touched without insulation. 6. Equipped with high temperature resistant centrifugal fan, large pressure center and long lift
Product Description CERVELO ASPERO GRX 810 DISC GRAVEL BIKE 2021 Realised via a speed-driven design brief, the Cervelo Aspero GRX 810 Disc Gravel Bike attacks any trail, track or rough road with increased velocity and heightened composure. . HIGHLIGHTS A gravel bike designed for pure speed and for the rider who is as keen on exploring the wild as they are their own physical limits The full carbon frame has World Tour road racing stiffness, low weight and aerodynamically tweaked tube profiles The frame and fork accept 700c wheels with up to 42mm tyres or 650b wheels with up to 49mm tyres Balanced geometry can be tweaked by the Trail Mixer fork tab that refines the handling depending on the wheels size being used and the terrain Reserve 32mm, 700c, carbon wheels are light but robust and offer increased tyre support Shimano GRX 810 gears are accurate and dependable Shimano GRX RX810 hydraulic disc brakes are powerful and modulated SPECIFICATION Frame Cervelo Aspero All-Carbon, 12x142mm thru-axle, 700c or 650b wheel size compatible, integrated headset 1-1/8â?? x 1-1/2â?? Fork Cerv�©lo All-Carbon, tapered �?spero Fork with adjustable trail, 12x100mm thru-axle Headset FSA IS2 1-1/8 x 1-1/2 Bottom Bracket Cervelo JY-BB 24 Stem Easton EA70 alloy Handlebar Easton EC70AX carbon Bar Tape Cervelo bar tape Front Brake Shimano GRX RX810 hydraulic disc, with Shimano SM-RT800 rotor 160mm Rear Brake Shimano GRX RX810 hydraulic disc, with Shimano SM-RT800 rotor 160mm Brake Levers Shimano GRX RX810 Front Derailleur Shimano GRX 810, 11-speed Rear Derailleur Shimano GRX 810, 11-speed Shift Levers Shimano GRX RX 810, 11-speed Chain Shimano CN-HG701, 11-speed Cassette Shimano HG800, 11-34, 11-speed Crankset Shimano GRX 810, 40/31 chainrings Front Wheel Reserve Carbon 32mm DT370, 24 hole, 24mm internal rim width, Center Lock, 12x100mm thru axle, tubeless-ready Rear Wheel Reserve Carbon 32mm DT370, 24 hole, 24mm internal rim width, Center Lock, 12x142mm thru axle, tubeless-ready Front Tyre Panaracer Gravel King SK Folding 700x38mm, tubeless-ready clincher Rear Tyre Panaracer Gravel King SK Folding 700x38mm, tubeless-ready clincher Saddle Prologo Dimension NDR T4.0 Seatpost Easton EC70 Carbon Pedals Available to be purchased separately Accessories Smartpak 400A top tube storage bag
bestscooterstore * com Product Description CANNONDALE QUICK CX 1 DISC WOMENS HYBRID BIKE 2021 Lightweight Cannondale SmartForm alloy frame with 360�° reflective accents SAVE micro-suspension smooths out bumps Suntour NEX-E25, 63mm suspension fork with remote lockout SRAM SX Eagle 12-speed components Shimano MT210-UR300 hydraulic disc brakes Road bike style wheels are fitted with large volume tyres for better bump absorption, grip and durability Rack and mudguard mounts An integrated wheel sensor helps track your activity (speed, distance, calories burned), registers your bike, reminds you of services and more, all through the Cannondale app SPECIFICATION Frame Cannondale All-New, SmartForm C3 Alloy, SAVE, tapered headtube, Straightshot hidden cable routing, flat mount disc, rack and mudguard mounts, 360�° reflectivity Fork Suntour NEX-E25, 63mm, tapered alloy steerer, coil, remote lockout, custom crown Headset Cannondale Semi Integrated, tapered Bottom Bracket Truvativ Power Spline Stem Cannondale 3 with Intellimount, alloy, 31.8mm clamp Handlebar Cannondale 3, 6061 double-butted, 20mm rise, 9�° back, 660mm Grips Fabric FunGuy Front Brake Shimano MT210-UR300 hydraulic disc, 160mm RT56 rotors Rear Brake Shimano MT210-UR300 hydraulic disc, 160mm RT56 rotors Brake Levers Shimano MT210 Rear Derailleur SX Eagle Shift Levers SRAM SX Eagle, 12-speed Chain SRAM SX Eagle, 12-speed Cassette SRAM SX Eagle, 11-50, 12-speed Crankset SRAM SX Eagle Power Spline, 38T Front Wheel Shimano HB-M4050 hub, Cannondale Disc, double wall with eyelet, 32h rim, Stainless Steel, 14 gram spokes Rear Wheel Shimano FH-M4050, Cannondale Disc, double wall with eyelet, 32h rim, Stainless Steel, 14 gram spokes Front Tyre Vittoria Terreno Dry, 700 x 40, reflective strip, clincher Rear Tyre Vittoria Terreno Dry, 700 x 40, reflective strip, clincher Saddle Cannondale Fitness Ergo Double Density Seatpost Cannondale 3 6061 Alloy, 27.2 x 350mm Pedals Cannondale Platform Accessories Cannondale Wheel Sensor
Buy New 2024 Specialized S-Works Tarmac SL8 - Shimano Dura-Ace Di2 Road Bike Price : USD 8600 Min Order : 1 Unit Lead Time : 6 - 9 Days Port : CIF / Juanda International Airport Payment :� � Payment via PayPal, Bank Wire Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International and Xoom Shipment : FedEx, DHL, UPS Product : New Original and Warranty Gun2bikeshop is 100% safe, because purchase products at Gun2bikeshop provide a100% moneyback guarantee. Gun2bikeshop Address : Jl.Mayjend Sungkono No.108, Kutoanyar, Jawa Timur 66215 - Indonesia SPECIFICATION : FRAME S-Works Tarmac SL8 FACT 12r Carbon, Rider First Engineeredâ?¢, Win Tunnel Engineered, Clean Routing, Threaded BB, 12x142mm thru-axle, flat-mount disc FORK S-Works FACT 12r Carbon, 12x100mm thru-axle, flat-mount disc HANDLEBARS Roval Rapide Cockpit, Integrated Bar/Stem STEM Roval Rapide Cockpit, Integrated Bar/Stem TAPE Supacaz Super Sticky Kush SADDLE Body Geometry S-Works Power, carbon fiber rails, carbon fiber base SEATPOST S-Works Tarmac SL8 Carbon seat post, FACT Carbon, 15mm offset FRONT BRAKE Shimano Dura-Ace R9270, hydraulic disc SEAT BINDER Tarmac integrated wedge REAR BRAKE Shimano Dura-Ace R9270, hydraulic disc SHIFT LEVERS Shimano Dura-Ace R9270, hydraulic disc FRONT DERAILLEUR Shimano Dura-Ace R9250, braze-on REAR DERAILLEUR Shimano Dura-Ace R9250, 12-speed CASSETTE Shimano Dura-Ace, 12-speed, 11-30t CHAIN Shimano Dura-Ace, 12-speed CRANKSET Shimano Dura-Ace R9200, HollowTech II, 12-speed with 4iiii Precision Pro dual-sided powermeter CHAINRINGS 52/36T BOTTOM BRACKET Shimano Dura-Ace, BB-R9200 FRONT WHEEL Roval Rapide CLX II, Tubeless, 21mm internal width carbon rim, 51mm depth, Win Tunnel Engineered, Roval AFD hub, 18h, DT Swiss Aerolite spokes REAR WHEEL Roval Rapide CLX II, Tubeless, 21mm internal width carbon rim, 60mm depth, Win Tunnel Engineered, Roval AFD hub, 24h, DT Swiss Aerolite spokes FRONT TIRE S-Works Turbo Rapidair 2BR, 700x26mm REAR TIRE S-Works Turbo Rapidair 2BR, 700x26mm INNER TUBES Turbo Ultralight, 60mm Front, 80mm Rear, Presta valve
Concrete Block Maker A concrete block maker, often referred to as a concrete block machine or concrete block manufacturing machine, is a device used in the construction industry to produce concrete blocks, which are essential building materials for various types of structures. These machines automate the process of creating concrete blocks, which are commonly used for walls, pavements, and other load-bearing structures. Features Mold Options: Concrete block makers often come with interchangeable molds that allow you to produce blocks of different sizes, shapes, and designs. This versatility is useful for accommodating various construction needs. Automation Levels: Concrete block makers can range from manual machines that require human operation for each step, to semi-automatic and fully automatic machines that handle many processes automatically, including feeding, compaction, and demolding. Vibration System: Many machines incorporate a vibration system that helps to compact the concrete mixture in the mold, ensuring that the blocks have a dense and uniform structure. Hydraulic or Mechanical Systems: The compaction process can be driven by hydraulic or mechanical systems, both of which apply pressure to the concrete mixture. Hydraulic systems are often preferred for their precision and ability to exert consistent pressure. Curing System: Some advanced machines include a curing system that helps accelerate the curing process, allowing for quicker block turnover and reduced curing time. Control Panel: Automatic and semi-automatic machines typically have a control panel that allows operators to adjust settings, monitor the production process, and troubleshoot issues. Batching System: In some machines, an automated batching system accurately measures and mixes the raw materials in the correct proportions, ensuring consistent block quality. High Production Capacity: Depending on the model, concrete block makers can produce a significant number of blocks per hour, making them suitable for large-scale construction projects. Quality Control Sensors: Some machines have sensors that monitor the density, moisture, and strength of the blocks, ensuring that they meet quality standards. Energy Efficiency: Some modern machines are designed with energy-saving features to reduce power consumption during operation. User-Friendly Design: Manufacturers often prioritize user-friendly interfaces and ergonomic designs to make operation and maintenance easier for operators. Durability and Materials: High-quality machines are constructed from durable materials that can withstand the harsh conditions of a construction environment. Safety Features: Safety mechanisms such as emergency stop buttons, safety guards, and sensors are integrated into many machines to protect operators during operation.
