Mechanical Joint of Cast Iron Pipes require rings as per IS:12820 which recommends usage of Rubber Rings as per IS:5382-1985 Type IV.
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Metallic Gaskets: \"Metallic Gaskets\" are gaskets that are fabricated from one or a combination of metals to the desired shape and size. Common metallic gaskets are Spiral Wound Gaskets, Double Jacketed Metal Gaskets, Solid Metal Gaskets, Corrugated Metal Gaskets, Ring Type Joint Gasket used for heat exchangers, compressors, condensers, pumps, valves and turbines. These metallic gaskets are suitable for high pressure & temperature applications and require high bolt load to seal. Types: � Spiral Wound, Double Jacketed, Solid Metal gaskets, Corrugated Metal Jacketed Gaskets, Ring type joint Gaskets Non Metallic Gaskets: \"Non Metallic Gaskets\" or \"Soft Gaskets\" are gaskets that are easily compressed under a low bolt load. They are composite sheet materials that are suitable for a wide range of general as well as corrosive chemical applications. They are easily available either in sheet form or as gaskets that are cut accurately to any reasonable shape and size. Non metallic gaskets are usually manufactured from materials like arimid fiber, glass fiber, elastomers, teflon (PTFE), compressed asbestos fibre (CAF), flexible graphite etc. Types are: Non Asbestos, Asbestos, Flexible Graphite, PTFE, Viton, Silicone Rubber, Neoprene and Flange Gaskets.
Metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles.These are manufacturered in accordance with specific tolerances on CNC machines. Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable). Ring Joint Gaskets are as per API- 6A. The units are manufactured in a variety of standard and special materials For price and specification please contact us
Supplier: Engineering goods like machined, forged, stamped, casting, aluminum casting, aluminum extrusion, fasteners, springs, washers, gaskets, oil seals, rubber components, etc
AIGI 30 A solid metal gasket that is softer than the mating flange material that is virtually 'crushed' into the flange face, creating a seal by filling imperfections and leak paths with gasket material. Under high sealing stress the gasket deforms but not the flange. They are used predominantly in the petrochemical industry (offshore oil platforms, refineries) due to the high service pressures required in their processes. Ring joint gaskets are machined to exact specifications and tight tolerances and come in a number of styles. Hardness of Materials On compression of the flange assembly, it is imperative that the ring joint gasket be significantly softer than the flange groove so that the gasket plastically deforms and not the groove. The use of harder ring joint gaskets can result in flange groove damage. For this reason, ring joint gaskets are supplied with the following maximum hardness values: Certified at API 6A-1069
Ring joint gasket/ metal gasket [technical parameter] Types of gasket: serrated, octagonal, elliptic, lens-shaped Materials: carbon steel, ocr13, 1cr18ni9, 304, 316 Temperature: -100-80 Pressure: 35mpa [main uses] for static sealing in flange joint of high pressure pipeline, container, equipment and etc. [specification] dn10-800mm.
Properties Value remark Piling density/gcm 3 0.002-0.005 Product density/gcm 3 0.8-1.7 Carbon content % í² 98 >99.5%is called Crozzle(ash) % ín0.35 High purity graphite Sulphur content í¦ 1000ppm Chlorine content í¦ 50ppm Melting point 0 c 3650 Hardness 21~33 Tensile strength(mpa) 8~10 Compressive strength(mpa) 70~110 Compressibility % í² 15 Resilient rate % í² 30 Ph 0-14 Friction coefficient 0.149 Wooden box
Ring joint gasket/ metal gasket [technical parameter] Types of gasket: serrated, octagonal, elliptic, lens-shaped Materials: carbon steel, ocr13, 1cr18ni9, 304, 316 Temperature: -100-80 Pressure: 35mpa [main uses] for static sealing in flange joint of high pressure pipeline, container, equipment and etc. [specification] dn10-800mm Wooded box
Description: WFY RJ3300is machined from solid metal in a variety of shapes and designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material and shape. It is designed to withstand exceptionally high assembly loads over a small area, thus producing high seating stresses.
Ring joint gasket Got-450 ring joint gasket chooses solid metal with kinds of materials, and is mechanically cut and processed into metal sealing gaskets with kinds of forms by high precision nc lathe. It is suitable for the sealing part of pressure container, valve, and cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high. Metal flat gasket Metal elliptic gasket Metal aniseed gasket Rx type metal gasket Bx type metal gasket Special-shaped metal gasket