Minerals, gypsum plaster, clinker, gypsum stone, limestone & white cement, gabbro, industrial salt, polypropylene, feldspar, sulfur, foods and spices like rose water, saffron, pistachio, nuts and dried fruits, petrochemicals like lpg, bitumen, engine oil, building material, tiles and ceramics.
Roots Blower For Sale The Roots blower is a volumetric fan, with impeller end face and front and rear end covers of the fan. The principle is to use two blade shaped rotors to move relative in the cylinder to compress and transport gas in a rotary compressor. This type of blower has a simple structure and is easy to manufacture. It is widely used in aquaculture oxygenation, sewage treatment aeration, cement conveying, and is more suitable for gas conveying and pressurization systems in low pressure situations. It can also be used as a vacuum pump, etc. Type of Roots Blowers for Sale Roots Vacuum Pump Roots vacuum pumps have been applied in petroleum, chemical, plastic, pesticide, turbine rotor dynamic balance, aerospace space simulation and other devices, so they should be vigorously promoted and applied in China. It is also widely used in industries such as petroleum, chemical, metallurgy, and textiles. Rotary Air Blower Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has large air volume, energy saving, and silent operation that other forms of fans cannot compare with.). Smooth operation and convenient installation (for small models, as long as they are properly placed, the vibration is minimal and there is no need to install anti vibration devices, making installation convenient). Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume changes very little with the pressure change). Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation). The material is excellent, the structure is clever, and the performance is stable (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, the performance is stable, and there are few long-term failures). Simple maintenance, few faults, and long service life (low speed, low wear, and long service life).
Textile Cord Multipurpose Hose MW300 (Wrapped Surface) Multi-Purpose rubber hose is a traditional hose used across many industries. The rubber will remain more flexible over time as compared to PVC hoses, especially in colder environments. It can be used for air, water, heater, or low pressure agricultural spray where oil presence is limited. Construction: Inner Tube:Black Extruded NBR rubber Reinforcement:High tensile synthetic textile braided Cover:Black Extruded wrapped NBR- abrasion and ozone resistant rubber Working Pressure:Constant Pressure 20 Bar / 300 psi Temperature Range:-30 80 (-22 F 176 F) Application:The multipurpose hose was widely used to delivery the water, air and fuel oil for varies industrial equipment and different agriculture and construction machines. Multipurpose air hose has always been at our core. Multi-purpose hoses are commonly used to transport air and water for a multitude of applications. Our multi-purpose hoses can be found worldwide in industries such as meat and poultry processing facilities, grocery store food counters, breweries, dairies, and utility districts. The category of multipurpose typically includes those specs traditionally produced in long lengths on reels. Also known as general purpose hose, these specs are made with a smooth cover offered in a variety of colors and from sizes ranging from 1/4 inch to 2 inch. Our multipurpose air hose provide the best combination of performance, durability, and ease of use. The rubber tube and covers range from EPDM (excellent chemical, temperature and environmental resistance) to Nitrile (the best oil resistance). Pressure ratings of multipurpose air hose will go as high as 300 PSI working pressure. Most of our multipurpose air hose specs will have maximum temperature ratings of about 200 Deg. F., providing superior performance in high-temperature air tool applications. Excellent for air and water service as well as many agricultural chemicals. EPDM tube and cover resists heat, sunlight, ozone and weathering. Suitable for applications such as oil mist lubricating air lines, but NOT suitable for the transfer of petroleum products. Feature Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
Textile Cord Multipurpose Hose MS300 Smooth Surface A multi-Purpose rubber hose is a traditional hose used across many industries. The rubber will remain more flexible over time as compared to PVC hoses, especially in colder environments. It can be used for air, water, heater, or low-pressure agricultural spray where oil presence is limited. Construction: Inner Tube: Black Extruded NBR rubber Reinforcement: High tensile synthetic textile braided Cover:Black Extruded smooth NBR- abrasion and ozone resistant rubber Working Pressure:Constant Pressure 20 Bar / 300 psi Temperature Range:-30 +80 (-22 F 176 F) Application:The multipurpose hose was widely used to delivery the water, air and fuel oil for varies industrial equipment and different agriculture and construction machines. Multipurpose air hose has always been at our core. Multi-purpose hoses are commonly used to transport air and water for a multitude of applications. Our multi-purpose hoses can be found worldwide in industries such as meat and poultry processing facilities, grocery store food counters, breweries, dairies, and utility districts. The category of multipurpose typically includes those specs traditionally produced in long lengths on reels. Also known as general purpose hose, these specs are made with a smooth cover offered in a variety of colors and from sizes ranging from 1/4 inch to 2 inch. Our multipurpose air hose provide the best combination of performance, durability, and ease of use. The rubber tube and covers range from EPDM (excellent chemical, temperature and environmental resistance) to Nitrile (the best oil resistance). Pressure ratings of multipurpose air hose will go as high as 300 PSI working pressure. Most of our multipurpose air hose specs will have maximum temperature ratings of about 200 Deg. F., providing superior performance in high-temperature air tool applications. Excellent for air and water service as well as many agricultural chemicals. EPDM tube and cover resists heat, sunlight, ozone and weathering. Suitable for applications such as oil mist lubricating air lines, but NOT suitable for the transfer of petroleum products. Feature Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipe line, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced.Suitably for transportation of gasoline, kerosene, diesel, engine oil, lubricating oil . Construction: Inner Tube:Black Extruded NBR rubber Reinforcement:High tensile synthetic textile braided Cover:Black Extruded wrapped NBR- abrasion and ozone resistant rubber Working Pressure:Constant Pressure 20 Bar / 300 psi Temperature Range:-30+80 (-22 F 176 F) Application:The wrapped surface fuel oil hose sizes up tp 2, was widely used to all the industrial equipment and device to deliver the gasoline, diesel, fuel oil. We are a leading manufacturer and supplier of fuel oil rubber hose in China. We can supply a wide range of fuel oil hoses that are great for general purpose fuel and oil delivery, including petrol and diesel.Fuel Oil is for the transfer and delivery of fuel oil and petroleum products for home delivery, commercial and industrial service .Fuel Oil has two textile braids. The braided construction reduces kinking and twisting when reeling. The smooth cover has low drag resistance. Fuel Oil Rubber Hose Other name: Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipe line, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced Before you start your engines, equip them with Sinopulse fuel hoses. We have engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power. Hose Type: Extruded Smooth. Application: Soft wall hose for low pressure lines, return lines, and drain lines. Used in fuel system or in the crankcase of internal combustion engines in mobile (truck, bus, off highways vehicles), stationary and marine applications. Temperature: -40 to 100. Tube: black, smooth,nitrile rubber Reinforcement: high tensile synthetic yarn braided or spiraled high tensile textile plies. Feature Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
Textile Cord Fuel Oil Hose FS300 Smooth Surface Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipeline, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced.Suitable for transportation of gasoline, kerosene, diesel, engine oil, and lubricating oil . Construction: Inner Tube:Black Extruded NBR rubber Reinforcement:High tensile synthetic textile braided Cover:Black Extruded smooth NBR- abrasion and ozone resistant rubber Working Pressure:Constant Pressure 20 Bar / 300 psi Temperature Range:-30 +80 (-22 F 176 F) Application:The smooth surface fuel oil hose was widely used to all the industrial equipment and device to delivery the gasoline, diesel, fuel oil. We are a leading manufacturer and supplier of fuel oil rubber hose in China. We can supply a wide range of fuel oil hoses that are great for general purpose fuel and oil delivery, including petrol and diesel.Fuel Oil is for the transfer and delivery of fuel oil and petroleum products for home delivery, commercial and industrial service .Fuel Oil has two textile braids. The braided construction reduces kinking and twisting when reeling. The smooth cover has low drag resistance. Fuel Oil Rubber Hose Other name: Rubber fuel oil hoses, Flexible Reinforced oil Hoses, reinforced fuel tubing. fuel oil pipe line, Oil delivery rubber hose, oil resistance rubber hose, oil resistance rubber hose with Fiber reinforced Before you start your engines, equip them with Sinopulse fuel hoses. We have engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power. Hose Type: Extruded Smooth. Application: Soft wall hose for low pressure lines, return lines, and drain lines. Used in fuel system or in the crankcase of internal combustion engines in mobile (truck, bus, off highways vehicles), stationary and marine applications. Temperature: -40 to 100 Tube: black, smooth,nitrile rubber Reinforcement: high tensile synthetic yarn braided or spiraled high tensile textile plies. Feature Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request
1 Butadiene 1-3, Crude C4, Butene -1 2 Methyl tert-butyl ether (MTBE) 3 Iso-butane (iC4) 4 Ammonia 5 Phtalic - Anhydride 6 Melamine Crystal 7 Methanol 8 Paraxylene 9 Orthoxlyene 10 Mixed Xylene 11 Urea 12 Monoethylene Glycol (MEG) 13 Diethylene Glycol (DEG) 14 Anti-freeze 15 Monopropylene Glycol (Chemical Grade) â?? (MPG) 16 Sodium hypochlorite 17 Caustic soda 18 Paraffin 19 Petroleum jelly (Vaseline) 20 Formaldehyde (formalin) 21 Etoxylated alchole 7 mol 22 PEG 400 Chemical Grade 23 SLES 70 24 LABSA 25 Betaein 26 Oleic Acid 27 Loramide 29 Carbon Black 30 Methyl Ethyl Ketone (MEK) 31 Secondary Butyl Alcohol 32 Toulene Diisocyanate (TDI) 33 Methyl Diisocyanate (MDI) 34 Nitric Acid 35 Chloridric Acid 36 Styrene Monomer 37 Phosphoric acid 38 Sulfuric Acid 39 Diammonium Phosphate 40 Granular Sulfur 41 Ammonium Sulphate 42 Dioctyl Phthalate (DOP) 44 Isobutyl Acetate 45 Triacetin 46 Diethyl Ether 47 Sodium Sulfite 48 Lacquer Nitrocellulose 49 Methyl Acetate 50 N-Butyl Acetate 52 Sodium Metoxide 53 Nitrodor 54 Nitrocellulose (Type A) 55 Diethyl Phthalate 56 Dioctyl Adipate 57 Dioctyl Terephthalate 58 Dioctyl Sebacate 59 Dibutyl Phthalate 60 Dimethyl phthalate 61 Phosphoric Acid 62 Di Calcium Phosphate 63 Phenyl Acetic Acid 64 Ammonium Nitrate Sulfate 65 Diisobutyl Phthalate 66 Sodium Nitrite 67 Acetyl Tri Butyl Citrate 68 Acetyl Tri Ethyl Citrate 69 Ethyl Acetate 70 Ethyl Cellulose 71 Cellulose acetate 72 Hydrogen Peroxide 73 Ethanol 74 Butyl Acetate 75 Linear Alkyl Benzene(LAB) 76 Heavy Alkylate(HAB) 77 Normal-Paraffin(NP) 78 Alkyd Resin 79 Unsaturated polyester Resin 80 Phenolic Resin 81 Bakelite 82 Fatty Acid 83 Solid Epoxy Resin 84 Furani Resin 85 Amino Resin 86 Vinyl Ester Resin 87 Saturated Polyester Resin 88 SB Acrylic Resin 89 Emulsion 90 Morpholine 91 N-formyl morpholine 92 Amino imidazoline 93 Amido imidazoline 94 Triazine 95 Carboxylic acid 96 Maleic Anhydride 97 Sodium Metabisulfite 98 Sodium Sulfite 99 Catalyzed Sodium Sulfite
Sodium lignosulfonate It is produced by reed as raw material and produced by low pollution technology,sodium lignosulfonate is with good solubility, high surface activity and dispersing ability. It is a sulfonate derivative contents benzoic acid and carboxyl.Itâ??s adhesion, dispersion and chelation are widely used in various industries to improve its physical and chemical properties, save costs and improve efficiency. Mainly export for Concrete: Polycarboxylate superplasticizer is a new type of water reducing agent. The water reduction rate is generally around 20%, but it has high requirements for cement and sand of concrete.If the mud content in the sand is slightly larger, the polycarboxylate superplasticizer has a water reduction rate of 0.However, the technical team found that when using polycarboxylate superplasticizerâ??s dosage is 6% of weight with sodium lignosulfonateâ??s dosage 4%-6%,the water reduction rate will reach the most ideal water reducing ratio and the cost of concrete admixture is also the most economical.Because of the characteristics of calcium and magnesium ions in Sodium lignosulfonate, it is easy to occur precipitation and discoloration when mixed with polycarboxylate superplasticizer. Other Application: 1. Concrete water reducer: it can adsorb and disperse cement and improve various physical properties of concrete. 2. Coal water slurry additive: adding this product during the preparation of coal water slurry can improve the output of high mill, maintain the normal condition of pulping system, reduce the power consumption of pulping, increase the concentration of coal water slurry, reduce the oxygen consumption and coal consumption, improve the efficiency of cold gas, reduce the viscosity of coal water slurry and achieve certain stability and fluidity. 3. Refractory and ceramic green body reinforcer: in the manufacturing process of large-size wall and floor tiles and refractory bricks, the raw material particles of green body can be firmly bonded, and the dry green body strength can be increased by more than 20% - 60%. 4. Filler and dispersant for dye industry and pesticide processing: it can increase the color power of dyes, color more evenly, and shorten the grinding time of dyes; 5. Filler, dispersant and suspending agent in pesticide processing: greatly improve the suspension rate and wettability of wettable powder. 6. Binder for powder and granular materials: it can obtain good effects such as high strength, good stability and lubrication of molds in the balling of mineral materials. 7.Dilution dispersant and viscosity reducer in drilling: Improve the fluidity of crude oil transportation and reduce energy consumption. In petroleum products, it is used as cleaning agent, dispersant, high alkaline additive, antirust agent, antistatic agent, emulsion viscosity reducer, wax elimination and anti wax agent, etc.
The stainless steel micron wire mesh filter tube is a filter element made primarily of 304 or 316 stainless steel wire mesh. It is manufactured using stainless steel wire mesh woven in various mesh shapes to achieve the desired filtration grade. The stainless steel wire mesh filter tube has uniform surface filtration performance and employs multi-layered sintered stainless steel mesh as the main filter material. The mesh has interlaced pores, making it resistant to high temperatures, sudden temperature changes, and corrosion, making it suitable for various corrosive media such as acids and alkalis. Parameters Diameter: 20 mm Wall Thickness: 2 mm Operating Temperature: 600�°C Filtration Precision: 100 microns Connections: Open on both ends Features High Pressure Differential: It is a filter element with high pressure resistance, commonly used in high-pressure fluid filtration applications to ensure long-term operation of equipment in high-pressure pipelines. High Temperature Resistance: Stainless steel material can withstand prolonged operation at high temperatures. While other materials may deform under high temperatures, stainless steel filter cartridges remain stable. Cleanable: The material is stainless steel, which is easy to clean and reuse. Cleaning the equipment involves removing impurities and reinstalling it for further operations. It allows for fluid backwashing, ensuring no residual contaminants on the surface of the stainless steel filter cartridge. Long Lifespan: The filter element has certain corrosion resistance and a longer service life. Its corrosion resistance makes it an ideal filtration element for preventing secondary contamination of fluids. Customizable Sizes: It comes in different sizes to be used in a wide range of industrial applications. Different sizes can easily adapt to different types of equipment. It also offers different sealing rings or gasket attachments for various applications. Stable Aperture: The filtration medium has a fixed pore structure, preventing contaminated particles from returning to the clean fluid. The absolute rated value of the pores provides consistent and reliable fluid filtration, improving filtration efficiency. Applications Petrochemical and oilfield pipeline filtration Gasoline filtration for engineering machines and refueling equipment Water treatment equipment filtration Pharmaceutical and food processing industries Chemical liquid filtration Suitable for pre-processing and post-processing systems in industries such as electronics, petroleum, chemical, pharmaceuticals, and food.
Basic Information Powder Sintered Titanium Filter Element: The powder sintered titanium filter element is made from specially treated titanium powder. It exhibits high corrosion resistance, high temperature resistance, and mechanical strength, effectively filtering out tiny particles and impurities while maintaining a high filtration efficiency. Stainless Steel Filter Housing: The stainless steel housing is made of stainless steel material and possesses excellent corrosion resistance and high-temperature resistance. The stainless steel housing is typically designed to be detachable, facilitating filter maintenance and replacement. Assembly Process: During the assembly of the filter, the powder sintered titanium filter element is installed inside the stainless steel filter housing. Usually, there is a sealing device between the filter element and the housing, ensuring that the filtration medium can only pass through the filter element and not bypass it. Once assembled, the liquid or gas to be filtered can be introduced into the filter through suitable inlet and outlet interfaces, and the filtered fluid can be obtained from the outlet. Applications Chemical Industry: This type of filter can maintain the purity of the medium during chemical reactions, preventing impurities from entering the product or damaging the equipment. Petroleum and Natural Gas Industry: This type of filter can be used in refineries, natural gas processing plants, oil fields, pipeline systems, etc., ensuring the purity of fluids and proper equipment operation. Food and Beverage Industry: This type of filter finds applications in food processing plants, beverage factories, dairy plants, etc., ensuring product hygiene and quality. Pharmaceutical Industry: This type of filter can be used in pharmaceutical plants, biotechnology companies, and pharmaceutical research institutions, ensuring the purity and safety of drugs. Cleaning methods After a certain period of usage, the titanium rod cartridge may experience partial blockage, resulting in reduced flow performance and increased pressure at the filter's front end. For instance, the pressure may rise from below 0.22MPa to above 0.3MPa. In such cases, it becomes necessary to clean the cartridge, and the following cleaning methods are typically employed: For newly used cartridges, a common cleaning method involves backflushing with clear water and blowing with compressed air. This entails injecting clear water at a slightly higher pressure than the working pressure (e.g., 0.3MPa) to perform a reverse flushing cleaning process. The backwashing duration is typically around 1 to 3 minutes.
Shell and tube heat exchanger is a device that transfers part of the heat of hot fluid to cold fluid, also known as heat exchanger. Shell and tube heat exchangers are general-purpose equipment in chemical, petroleum, power, food and many other industrial sectors, and play an important role in production. There are many types of heat exchangers, but according to the principle and method of heat exchange between cold and hot fluids, they can be basically divided into three categories: partition type, hybrid type and regenerative type. Among the three types of heat exchangers, the partition wall heat exchanger is the most widely used. According to the different heat exchange tube bundles, the partition heat exchanger is divided into: FPR floating coil heat exchanger, LWR threaded tube heat exchanger, and WMH eddy current heat film heat exchanger. Advantages of shell and tube heat exchangers: 1. High heat transfer coefficient: threaded pipe is a high-efficiency heat transfer element combining internal and external threads made of red copper or stainless steel with high thermal conductivity. The threaded pipe heat exchanger made of it has little fluid resistance. , then a strong turbulent flow is formed, which greatly improves the heat release coefficient inside and outside the tube. After testing, the total heat transfer coefficient of steam-water heat exchange is 3000~6000W/m2, and the total heat transfer coefficient of water-water heat exchange is 2500~5500W/m2. 2. Compact structure: This product has a large heat transfer area per unit volume. The total heat transfer coefficient is high, so the floor space is greatly reduced, saving materials and space. 3. Not easy to scale: Due to the special concave-convex structure of the threaded pipe, multi-flow layers and rotary scouring are generated inside and outside the pipe. In addition to the thermal expansion and contraction of the pipe, impurities will not remain inside and outside the pipe wall, so it is not easy to scale. , the long-term operation effect is good. 4. Not easy to leak: The sealing circumference of this product is short, the thick thread of the threaded pipe is similar to an expansion joint, and it has its own compensation ability. The thermal stress of the heat exchanger is small, and it is not easy to leak. 5. Easy installation: This series of heat exchangers has two types: horizontal and vertical, which are easy to install in different positions. 6. Compulsory supervisory inspection, reliable quality: manufactured, inspected and accepted in strict accordance with GB150-1998 "Steel Pressure Vessel", GB151-1999 "Shell and Tube Heat Exchanger" and related standards, and accepted "Pressure Vessel Safety Technology Supervision Regulations" supervision.
Product Features White oil, also known as mineral oil, is a highly refined petroleum product that is colorless, odorless, and tasteless. When it meets certain purity standards, it's considered food grade and safe for use in various food applications, including as a mould release agent in cake baking. White oil can be an effective release agent due to its lubricating properties. It creates a barrier between the cake batter and the mold, preventing the baked cake from sticking to the mould and aiding in easy release after baking. Product Application Here are some properties and benefits of using food grade white oil as a cake mould release agent: **Non-reactive**: White oil is chemically inert, meaning it does not react with the food products or cause any undesirable changes in flavor or appearance. **Heat stable**: It remains stable at the high temperatures typical of baking, maintaining its properties and effectiveness. **Safe for consumption**: Food grade white oil is considered safe for consumption. Its use in food applications is regulated and approved by various authorities, such as the U.S. Food and Drug Administration (FDA). **Effective at releasing**: Its lubricating properties make it effective at preventing sticking and aiding in the release of baked goods from moulds. **Easy to apply**: It can be easily applied to baking molds using a brush or a spray. However, it's important to note that while white oil is effective at releasing, it doesnot contribute to browning or flavor as some other release agents (like butter or oil-based sprays) might. Also, only food grade white oil should be used in any food application. Non-food-grade white oils may contain impurities or additives that are not safe for consumption. Always check the product specifications and ensure it complies with food safety regulations in your country. THE TDS OF FOOD GRADE WHITE OIL FAQs What is food grade white oil? It is a type of mineral oil that meets the safety and quality standards set for food contact applications. It is a highly refined, colorless, odorless, and tasteless oil that is safe for direct contact with food. Food-grade white oil is commonly used in the food industry for various applications, including lubrication, release agents, and as a protective coating. What are the common applications of food grade white oil? It has a wide range of applications in the food industry. It is commonly used as a lubricant for food processing machinery, ensuring smooth operation and reducing friction. It is also utilized as a release agent for baking pans and molds, preventing food from sticking. Food grade white oil can be found in various food products such as bakery goods, confectionery, and food coatings to provide a protective barrier and enhance shelf life. Additionally, it is used as an ingredient in food-grade lubricants, polishes, and personal care products.
5um Porous Inconel 600 Metal Filter Element, which is a high-performance metal filter element. The filter element is made of high-quality Inconel 600 (Inconel 600) material, which has excellent filtration efficiency and corrosion resistance. It is designed for filtration and separation operations in a variety of demanding high-temperature and corrosive environments. Whether in chemical, petroleum, food processing or other industrial fields, this metal filter element can exert an excellent filtration effect. Parameter Material: Inconel 600 Pore size: 5um Size: �?50*155, �?60*185 or customized specifications Interface: VCR 1/2 interface Working Temperature: -200 - 1000�°C Technique: sintering Product Features 1.High flow capacity: 5um Porous Inconel 600 Metal Filter Element has excellent fluid handling capacity. Its design allows high flow rates through the filter element while maintaining consistent filtration, ensuring efficient fluid handling and production efficiency. 2.Compression resistance: The high strength and pressure resistance of Inconel 600 material enables 5um Porous Inconel 600 Metal Filter Element to withstand higher pressure. This makes it ideal for handling high pressure fluids while providing reliable filtration and separation performance. 3.Washable and Reusable: 5um Porous Inconel 600 Metal Filter Element can be maintained and reused through the cleaning process. Due to its corrosion resistance and high temperature resistance, the filter element is able to withstand cleaning and regeneration cycles, reducing waste and cost, and extending service life. 4.High Reliability: With the excellent performance of Inconel 600 material, 5um Porous Inconel 600 Metal Filter Element provides a reliable filtration solution. Its stability and durability ensure continuous filtration performance, reducing the risk of failure and downtime, thereby increasing the reliability and stability of industrial processes. 5.Wide range of applications: 5um Porous Inconel 600 Metal Filter Element is suitable for a variety of industries and applications. Whether it is chemical, oil and gas, electric power, food and beverage, or aerospace, the filter element can provide excellent filtration performance and meet the fluid handling requirements of different industries. Application 1.Chemical industry: Used for chemical production, solvent filtration, and handling corrosive media. 2.Oil and gas industry: Applied in oil and gas extraction, refining, and natural gas processing for filtration and separation operations. 3.Power generation sector: Utilized for cooling water filtration in power generation equipment, circulation water system filtration, etc. 4.Food and beverage industry: Employed for liquid filtration in food processing, filtration of food additives, and more.
50um Multiple Layers Mesh Cylinder Filter Element is a type of filter element that is made of sintered wire mesh laminated panel. It is designed to remove impurities and debris from fluids or gases that pass through it. The filter element is comparatively simple in processing compared with pleated filter elements and is typically constructed in the form of pipes or cylinders. Parameters Brand: TOPTITECH Material: SS 316L Layers: 5 layers Diameter: 20mm Length: 40mm Pore size: 50um Wall thickness: 12mm Features 1.The scientific framework makes it impossible for filter media to migrate. 2. With a great wide range of operating temperature, it can work safely and permanently under the temperature of -270-400 �°C. 3. As the stable performance of stainless steel material, it won't separate any deleterious substance both in high and low temperature. 4. Due to its strong resistance to corrosion, it won't be harmed by either acidic or alkaline conditions. 5. It can be cleaned very easily. 6. It offers a longer service life. 7. Available filtration rating (�¼m): 2, 5, 10, 20, 40, 75, 100, 150, 200. Application 1.Chemical processing: The Mesh Cylinder Filter is used to remove impurities from chemicals and solvents in chemical processing industries. 2.Oil and gas: The Mesh Cylinder Filter is used to filter natural gas, crude oil, and other petroleum products in the oil and gas industry. 3.Aerospace: The Mesh Cylinder Filter is used in aircraft hydraulic systems, fuel systems, and air conditioning systems. 4.Food and beverage: The Mesh Cylinder Filter is used to filter water, juices, and other liquids in the food and beverage industry. 5.Pharmaceutical: The Mesh Cylinder Filter is used to filter pharmaceutical products, such as vaccines and medications, during the manufacturing process. 6.Automotive: The Mesh Cylinder Filter is used in automotive engines to filter oil and other fluids. 7.Water treatment: The Mesh Cylinder Filter is used in water treatment plants to filter out impurities and debris from water. 8.HVAC: The Mesh Cylinder Filter is used in heating, ventilation, and air conditioning (HVAC) systems to filter air and remove airborne particles.
The stainless steel filter is a type of metal porous filter element made from industrial metal powder, typically 304 or 316L. The raw material is formed through cold isostatic pressing and then sintered under high temperature and high vacuum conditions. The resulting filter element contains countless micropores that are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. Product parameters Outer diameter: 20 100mm Length: 100 1500mm (more than 1500mm can be welded) Filtration accuracy: 0.5um 50um Porosity: 35-45% Features Here are four key features of the stainless steel filter: 1.Precise and uniform porosity: The stainless steel filter boasts highly accurate and uniform porosity, which ensures precision in filtration. The countless micropores inside the filter are curved, criss-crossed, and highly precise, allowing for deep-level precision filtration through pressurization. 2.Excellent mechanical properties: The filter has excellent mechanical properties, including impact resistance and alternating load. It has a stable shape with low resistance to filtration, enabling high permeability. 3.High-temperature resistance: The stainless steel filter has a high temperature resistance of up to 600, making it suitable for use in high-temperature environments. It exhibits a stable separation effect, and its good chemical stability provides high resistance to corrosion at high temperatures. 4.Easy to regenerate: The filter is easy to regenerate, enabling simple reverse cleaning and ensuring an extended service life. It is easy to weld, with seamless welding lengths of up to 1500mm, and the filter is highly versatile, making it suitable for use in a wide variety of applications. Application With its unique porous technology, stainless steel filters are widely used across a range of industries, including the petrochemical, coal chemical, pharmaceutical, water treatment, food, metallurgical, and gas purification fields. The filter is a new type of filtration and separation technology material that can be used for various applications, such as terminal filtration of petroleum products, fly ash filtration in the coal chemical industry, impurity removal and filtration of raw materials in the pharmaceutical and chemical industry, water purification, and filtration after ozone sterilization in the water treatment industry, and clarification and filtration of milk, beverages, beer, mineral water, and vegetable oil in the food industry. Processing: The production process of stainless steel filters involves monitoring all raw materials, including the metallurgical composition, particle size distribution, and bulk ratio of the metal powder. After being formed through cold isostatic pressing, the filter is sintered at high temperature and high vacuum.
A type of titanium fiber sintered felt with high porosity and a pore size gradient structure is known as sintered titanium fiber felt. It has a number of unique functions thanks to the fully interconnected pore structure and three-dimensional network fibers. It is frequently used in the electrolysis of water to produce hydrogen, in hydrogen-powered fuel cells, and in other applications where corrosion resistance is necessary. It is the perfect replacement for the carbon fiber gas diffusion layer in fuel cells. Product parameters Thickness: 0.25mm 0.4mm 0.6mm 0.8mm Titanium purity: 99.9% Porosity: 50-60% Titanium fiber diameter: 30-60 microns Features 1. Lightweight: Titanium fiber felt is light in weight and has excellent strength and rigidity, which can greatly reduce product weight and optimize product performance. 2. Stability: Titanium fiber felt has excellent high temperature, water resistance, corrosion resistance, wear resistance and other properties, not easy to deform, damage, aging, etc., and has a long service life. 3. High strength: Titanium fiber felt has high strength, good tensile, bending and extrusion properties, and can be widely used in various fields. 4. Heat insulation and sound insulation: Titanium fiber felt has excellent heat insulation and sound insulation performance, which can effectively reduce the influence of external heat and noise and improve indoor comfort. 5. Environmental protection: Titanium fiber felt is a non-toxic, harmless and non-polluting environmentally friendly material that will not have a negative impact on the environment and meets the requirements of sustainable development. 6. Easy to process: Titanium fiber felt is easy to cut, sew, staple, press, etc. It can be made into products of various shapes and sizes according to needs, and has high plasticity and adaptability. Applications 1.Petrochemical industry: terminal filtration of petroleum products, filtration of chemical carbon-alkali liquid, filtration of alcoholic organic solution, filtration of heavy coker gas oil, filtration of hydrocracking circulating oil. 2. Fly ash filtering for the chemical sector that uses coal. 3. Decarburization, decolorization, and fine filtration of pharmaceutical intermediates; filtration and separation of precious metal catalysts; purification and filtration of catalytic gases; elimination of impurities from and filtration of raw materials in the pharmaceutical and chemical industries. 4. Filtration following ozone sterilization and ozone aeration, water purification, and removal of mechanical contaminants in the water treatment sector. 5. Clarification and filtering in the food business for milk, drinks, beer, mineral water, vegetable oil, etc. 6. Gas purification using steam, compressed air, and catalyst filtration.
Industrial pure titanium tube is a high-quality titanium alloy pipe fitting made of high-quality sponge titanium as raw material and processed through a series of processes. Because titanium has the advantages of light weight, corrosion resistance and high temperature resistance, it is widely used in petrochemical, machinery manufacturing, aerospace, medicine and biology and other fields. Product parameters Product name: pure titanium pipe, titanium alloy welded pipe, titanium welded pipe, titanium alloy pipe Brand: TA1, TA2, TA9, TA10, TC4 (GR1, GR2, GR7, GR10, TC4) Specifications: Titanium welded pipe outer diameter (45.0~600mm) Wall thickness (0.1~5.0mm) Length (1000~6000mm) Supply state: Annealed state (M) Supply form: seamless, welded, and coil, etc. Supply standard: ASTM B337 seamless and welded titanium and titanium alloy pipes GB/T3624-2007 GB/T3625-2007 ASTM B338 Titanium and titanium alloy tubes for heat exchangers and condensers Features light in mass high strength Excellent mechanical properties Excellent corrosion resistance Applications Extensively used in the navigation, aerospace, vacuum salt manufacturing, automotive, medical sports, paper and textile, electric power, metallurgical, chlor-alkali, fertilizer, seawater desalination, instrument manufacturing, chlor-alkali manufacturing equipment, power equipment, mariculture, marine cleaning equipment, and other industries. Application of Titanium Tubes in Titanium Heat Exchangers The titanium heat exchanger is a heat exchange device made of high-quality titanium tubes that transfers part of the heat of the hot fluid to the cold fluid. Due to the many advantages of industrial pure titanium, titanium heat exchanger is a general-purpose equipment in chemical industry, petroleum, power, food and many other industrial sectors, and plays an important role in production. Physical characteristics Many benefits of titanium tubes include their light weight and high mechanical qualities. The tensile strength of pure titanium can reach 180 kg/mm2. Titanium has a great degree of strength. Certain steels are stronger than titanium alloys, although titanium alloys have greater specific strength than high-quality steel (measured as the ratio of tensile strength to density). Moreover, titanium alloys offer good fracture toughness, low temperature toughness, and heat resistant strength. Chemical features When used in diverse industrial solutions, titanium has strong chemical stability and corrosion resistance. An ideal material for refrigeration equipment accessories is industrial purity titanium. Industrially pure titanium has good corrosion resistance and can be used in a variety of chemical compounds, alkaline solutions, and salt solutions.
China Factory Supply Mining Drill Bits Rock Drilling Tricone Bits For Hard Rock Product Descriptions Tricone bit is an ideal solution for soft, medium, or hard rock formations, it is connected with the drill stem and rotates along with it, and drive cones to pressed on the rock. Each cone rotates round the axis of its leg and three cones simultaneously revolve around the bit center. The tungsten carbide inserts on the cone shell cause the formation to spall under the weight on bit and the impact load of cone rotating, the debris will be discharged out to hole by compression air. Tricone bits come in several different varieties, and can deal with a wide range of different rock formations. It is important to know the type of formation you are drilling in when selecting a drill bit. Application Fast delivery factory tricone drill bit for various mining stone,rock with high quality tungsten carbide insert Our drill bits are widely used in mining, oil, gas, water well drilling, HDD, quarrying and construction. Company Information Hunan TianYing Drilling Machine Manufacturing Co., Ltd. was founded in 1958, located at Zhuzhou, China, the word famous tungsten Carbide production base. We are a professional producer, and supplier of Rock Drilling Bits, all the bits crafted from the finest material available in today's market.TCI(Tungsten Carbide Insert) types are our main products, available in many sizes, designed for soft to very hard formations. With years of study and refining, our Rock Drilling Bits are preceded by extensive R&D, field tested, and backed by our unmatched commitment to service and support, our products exported to all over the world, such as Australia, North America, Middle East, North Africa and Southeast Asia etc. Today, Tianying's products have been favored and respected by domestic and foreign customers. We will continue to serve our customers with high quality products, excellent service and reasonable price. All of our bits are manufactured according to strict standards, set forth by the American Petroleum Institute (API). And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC). Packaging & Shipping wooden case Contact Us Fast delivery factory tricone drill bit for various mining stone,rock with high quality tungsten carbide insert
The stainless steel wedged wire mesh filter uses metal wedge wire mesh as the filter element, which has the advantages of high mechanical strength, high pressure difference resistance, and easy flushing and regeneration; the nearly two-dimensional filter has no dead spots for particle accumulation, and the wedge-shaped gaps can be gathered during backwashing. Backwashing energy, backwashing effect is good. The stainless steel wedged wire mesh filter element is easy to leak, wear-resistant and corrosion-resistant. The mesh has a trapezoidal cross section, and the gap is large at the bottom and narrow at the top. The whole wedge mesh is welded by wedge wire and supporting structure. There is an appropriate line spacing between the wedge wires arranged in parallel, which determines the filtration area. Product Parameters Brand: TOPTITECH Material: SS304, SS316L Filtration accuracy: 25um-800um Operating pressure: 5Mpa Shape: Flat, Cylindrical Features 1.Strong mechanical construction, able to tolerate significant pressure variations; 2.The filter gap is consistent, allowing for the formation of a fairly homogenous filter cake that is helpful for backwash regeneration; 3. Strong backwash regeneration ability; 4. Pressure-resistant, temperature-resistant, corrosion-resistant, applicable to various fluids. Applications Stainless steel wedged wire mesh filter elements are widely used in drinking water treatment, building circulating water treatment, industrial circulating water treatment, sewage treatment, mining industry water treatment, golf course water treatment, construction, steel, petroleum, chemical industry, electronics, power generation, textile, paper making , food, sugar, pharmaceuticals, plastics, automotive industries and other fields. 1.The petrochemical industry, which uses catalytic reaction, hydrodesulfurization, styrene dehydrogenation, ammonia conversion, isomerization, and other up-down and radial flow processes; 2. Sewage treatment and flood system: water inlet, basement supply, carbon and resin retention, demineralization method softening and ion exchange, sand, dual and mixed media filtration, wastewater sludge treatment; 3. screening, coal drying, starch filtration, pulp and plant fiber filtration, and beverage filtration are all involved in the processing of minerals, paper, and food;
Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries. Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300â?? Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. 4. Has certain metal or alloy properties. Energy absorption, noise reduction, heat resistance, shock resistance, cushioning, heat conduction, electrical conduction, high strength and good toughness. Suitable for high pressure environment. Weldable and simple machining, easy loading and unloading. 5. Stable pore shape and uniform distribution ensure stable filtration performance. The regeneration performance is good, and the filtration performance recovers more than 90% after regeneration. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Such as: seawater desalination, sewage treatment, transformer oil, lubricating oil, fuel oil and other oils, organic solutions, inorganic solutions, medicinal liquids, beverages and other liquids; coarse and fine filtration; various gases, steam dust removal, sterilization, removal of oil mist ; Noise reduction, flame retardant, heat resistance, catalytic reaction, catalyst filtration, gas buffer, sweating and cooling, porous electrode, antifreeze device manufacturing, etc. Package and Shipment 1.� Titanium Plate Sintered Filters� are usually packed in cartons, wrapped in soft film,� fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic� bags no damage during� transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.