Summary Molecular sieve is a kind of cubic crystal aluminosilicate compounds. Molecular sieve has the advantages of uniform porous structure, the diameter of the aperture size uniform, these holes to the adsorption of molecules smaller than the diameter of the cavity to the internal, and the polar molecules and unsaturated molecules has a preferential adsorption capacity, and are better able to different degrees, different saturation degree, molecular size and the boiling point of different molecules are separated, that is "screening" molecular, the so-called molecular sieve. Molecular sieve has the advantages of high adsorption capacity, high thermal stability, and so on, so that the molecular sieve is widely used. Molecular sieve classification 3A molecular sieve Chemical formula:, 1/3Na2O, Al2O3, 2SiO2, 9/2H2O, 2/3K2O Silicon aluminum ratio: SiO2/ Al2O3 = 2 Effective aperture: about 3A Application: mainly used for all kinds of liquids (such as ethanol dry, gas drying, dry methane gas, refrigerant drying, unsaturated hydrocarbon and pyrolysis gas, ethylene, acetylene, propylene, butadiene drying, alcohol and all kinds of solvent dehydration. 4A molecular sieves Chemical formula: Al2O3, 2SiO2, Na2O, 9/2H2O Silicon aluminum ratio: SiO2/ Al2O3 = 2 Effective aperture: about 4A Application: mainly used for natural gas and chemical gas and liquid, refrigerants, pharmaceuticals, electronics and materials and volatile substances dry, purified argon, methane, ethane, propane separation. 5A molecular sieves Chemical formula: 3/4CaO, 1/4Na2O, Al2O3, SiO2 2, 9/2H2O Silicon aluminum ratio: SiO2/ Al2O3 = 2 Effective aperture: about 5A Application: it is mainly used for the separation of the isomers of alkanes, oxygen and nitrogen separation, chemical industry, petroleum and natural gas, ammonia decomposition gas and other industrial gases and liquids. 13X molecular sieve Chemical formula: Al2O3 2.45SiO2 6.OH2O Na2O Application: industrial gas drying and purification, can also be used as a carrier. Purification of raw gas for air separation unit (simultaneous removal of H2O and CO2). Desulfurization of liquid hydrocarbons and natural petroleum gas (removal of hydrogen sulfide and thiol).
Precipitated barium sulfate by barium sulfide solution and to join after remove calcium and magnesium mirabilite solution mixing, reaction at 80 , precipitate, after the suction filter, washing and acid pickling, adjust pH 5 ~ 6, filtration, drying and crushing.Can also use barium with yellow halide solution of glauber's salt.In the water solubility of only 0.0024 g / 100 g of water.Soluble in hot concentrated sulfuric acid.Slightly soluble in water is not soluble in ethanol and dilute acid.The dry lump.Industrial precipitated barium sulfate itself has no poison, but such as soluble barium compounds, can cause poisoning. Used for paint, ink, plastic, rubber and raw materials of battery or filling machine, impression and bond paper surface coating agent, textile sizing agent.Glass is used as clarifying agent, defoaming and increase luster effect.Can be used as anti radiation protection wall.Also used in ceramic, enamel, spices and pigments and other industries.It is making other barium salt material. Barium sulfate due to the features of strong chemical inertness, good stability, acid and alkali resistance, moderate hardness, high density, high whiteness, can absorb harmful rays, etc, is the one which has the function of environmental protection material, so it is widely used in all kinds of paint, high-grade printing ink, medicine synthetic chemicals, rubber, paper, ceramics, cosmetics and other fields.Refined barium sulfate is widely used in all kinds of paint (water-based), oil and powder coating, ink, paper making, engineering plastics plastic) (home appliance shell, building materials, high-grade electrical insulating plastics and rubber products such as packing.Battery cathode expansion rod, also can be used in the manufacture of ceramic, enamel glaze material, etc.Precipitated barium sulfate BaSO4 can serve as a white coating, can also be used for rubber and paper filling agent, can increase the weight and the degree of smooth.Precipitated barium sulfate in rubber, plastic, papermaking, paint, printing ink, paint and other industries used as fillers, whitening agent, weighting agent.
?Physical Properties?: White thin crystal or crystalline powder, have characteristic smell, tiny sweet taste, and have optical activity. Melting point: 280—281°C (resolve), soluble in water(3.3g/100ml, 25°C ), ph 5.6—6.1 in 10% solution. DL-Methionine is stable to air and heat, and unstable to strong acid, soluble in dilute acid and diluted alkaline, insoluble in ethanol, and hardly soluble in ether. DL-Methionine can also cause de—methylation. ?Use?: DL-Methionine is biological protein synthesis skeleton amino acids. DL-Methionine is the necessary growth factors in livestock animal. It can also regulate animal’s metabolism. It is already widely used in feed, medicine, food and cosmetics, etc. In the feed industry, the maximum dosage is DL-Methionine. It is used to strengthen feed nutritional. If you add 1kg DL-Methionine in feed, and its nutritional value correspond to 50kg fish powder. DL-Methionine addition was 0.5%—0.2% in the feed. In the medicine area, DL-Methionine is the major element in aminophenol transfusion and compound amino acids. And also can used in synthetic medicinal vitamin. DL-Methionine has anti-fatty liver effects can be used to produce liver drug. In the food area, DL-Methionine is used for food’s amino acids and health food processing. And also used as nutrition supplement. ?Packaging?: Products is packed in plastic bag, each bag is 25kg net weight. The bag should divide into three layers, the outer layer is polyethylene composite cloth, the central layer is Kraft paper, and the inner layer is low density polyethylene film. Or according to the user’s requirements and also conforms to safety rules/standards valid in our country in packing. ?Storage?: Store in a cool, dry, ventilated warehouse. When storing large goods, you should install conductive balance equipment, and prevent the accumulation of static electricity charge. Product should be prevented from solarization, humidity and rain. Strictly forbid with the toxic substances mix to luck. ?Date of Minimum Durability?: under these conditions its active content is guaranteed for 5 years from the manufacturing date.
Scope This instrument with atmel microprocessor core, mechanical, optoelectronic, electrochemical and micro-detection technology in one, using the most advanced digital optical detection system, automatic completion determining transformer oil acid value, the experimental results to standardize the format automatically printouts. The instrument reasonable structure, stable performance, simple operation, is an ideal detection equipment. Features 1, the instrument is fully in accordance with gb / t7599-87 standard design and development, for domestic initiative, can accurately detect transformer oil, turbine oil, fuel oil and other petroleum products, anti-acid number of automatic test equipment. 2, no manual weighing just a sample placed in a specimen cup, the device will automatically injections, heated to reflux, determined to exclude waste, print the results display and other operations, reduce operator exposure sample and reagent, maximize the protection of their personal safety. 3, measurement instrument automatically deducted ethanol indicator background value and the background value, the result is more accurate. 4, instrument calibration instrument equipped with standard acid and calibration procedures, the user can at any time and in liquid instruments and calibration, and the solution used to overcome the changes in the concentration of defects and improve the reliability of test results. 5, the start time can be measured from 1 to 3 samples, easy to use, high efficiency 6, automatic detection end of the experiment: the color indicator measurement, automatic detection of the end of the color (color value can be set), and the same human judgment. (recognizes three indicator) Technical parameters 1, applies to gb / t7599-87, gb / t264-83 standard. 2, the test range: 0.002 ~ 1mg koh / g 3, the measurement error: = ± 0.005 mg koh / g 4. Repeatability: =0.005 mg koh / g 5, temperature: 10 ? ~ 45 ? 6, for humidity:
Scope This instrument was designed and manufactured in line with the standard GB / T259-88 "Petroleum products Determination of water-soluble acid and base". It can measure liquid petroleum products, additives, grease, paraffin, wax and waxy component water-soluble acid or water-soluble base. First, water soluble acid or alkali in the sample was extracted with distilled water or ethanol water solution, and then the extract was determined by pH indicator or indicator. Features 1, the instrument consists of two parts, simple structure, in full compliance with the requirements of GB / T 259 standard requirements. 2, can be independently controlled heating furnace, heating power continuously adjustable, heating control is extremely convenient. 3, the heating furnace using a heating plate glass braid, with a high heating efficiency, low energy consumption, no fire and so on. 4, test is convenient, easy to operate, accurate results. Technical Parameters 1 Power supply: AC220V ± 10%; 50Hz. 2 heating power: 100W ~ 1000W continuously adjustable. 3, pH meter: Range 0 ~ 14.00pH, accuracy ± 0.01pH. 4, sub-funnel: 250ml. 5, cylinder: 100 ml, 50 ml. 6, tube: F18 mm × 100 mm. 7, Erlenmeyer flask: 100 ml. 8, the ambient temperature: -10 ? ~ + 35 ?. 9, relative humidity: =85%. 10. Total power consumption: less than 1200W.
Dicalcium Phosphate Anhydrous: White and odorless powder; it is soluble in diluted Hydrochloric Acid, Nitric Acid and Acetic Acid; slightly soluble in water but insoluble in Ethanol; stable in air; its relative density is: 2.32. Dicalcium Phosphate Dihydrate: White monoclinic crystal powder; odorless and colorless; it is soluble in diluted Hydrochloric Acid, Nitric Acid and Acetic Acid; slightly soluble in water but insoluble in Ethanol; its relative density is 2.32; stable in air; it will lose crystal water when heated to 75â?? and then convert to Dicalcium Phosphate Anhydrous. In the food industry, it is used as a leavening agent, dough modifier, buffer, nutritional supplement, emulsifier, and stabilizer e.g. it is applied as a leavening agent for flour, cake, pastry, bakery, as a quality modifier for bread, and fried food. Also be applied in biscuits, milk powder, drinks, and ice cream as a nutrient supplement or quality improver. In the pharmaceutical industry, it is often used as an additive in the production of Calcium tablets or other tablets. In the daily chemical industry, it is used as a friction agent.
Characters: Ivory powder or granular solid, it can be dispersed into the hot water, can be dissolved into the ethanol and hot grease. It is a non-ionic emulsifier, HLB value is 3.8-5.3. Character: 1. It is good for form stable emulsion to avoid delamination and deposit of food and beverage by adding emulsifier. And it could improve quality of product and prolong shelf life of product 2. It can form the complex with the protein and starch, prevent the starch from aging, used in bread, cake for keeping the shelf life. 3. It can be arranged in order on surface of grease. This is helpful to control and stabilize crystallization of grease. Especially in production of margarine, it can improve plasticity and malleability of product to avoid delamination of the oil and water.
Our CAJEPUT OIL specifications are as follows: 1) Specific Gravity at 25C(gr/ml):0.900-0.930; 2) Refractive Index at 20C: 1.450-1.470; 3) Optical Rotation: 4 to 0; 4) Solubility in 80 Ethanol: Clear; 5) Cineol Content: 60% (premium/super); 6) Country of Origin: Indonesia 7) Location: Indonesia 8) MOQ: 1 MT (1000 Kg) 9) FOB Price: Negotiable 10)Payment: Bank transfer-Payment in advance Full 11)Packaging: jerrycan of 25 kg or 1 drum of 200 Kg
Potassium Citrate is also known as Tri Potassium Citrate which is potassium salt of citric acid with the molecular formulation. This is also available in IP/BP/USP Pharmacopeia. Feature: â?¢ Potassium Citrate is white hygroscopic crystalline powder. â?¢ It is Odorless with the saline taste. â?¢ Very soluble in Water & Glycerin, where practically insoluble in Ethanol. Uses: Potassium Citrate is potassium salt widely used as acidity regulator & preservative in food & Beverages. Further it can be used in a wide variety of industries like Food, Beverages and Pharmaceutical etc. Packaging & Storage: 25 kg Printed Paper Bag Stored in a dry & ventilated warehouse. Kept away from the moisture & Heat.
CORN GLUTEN MEAL 60. ANIMAL FEED ORIGIN: UKRAINE QUALITY: Established by the International Standards (SGS). Specification: Standard Form of Packing : - 25/50 kg - big bags (1 ton) - AS PER CUSTOMER'S DEMAND Minimum Order Quantity: 250 MT Production Capacity: 5000 MT per month Shipping Terms FOB or CIF ASWP Payments terms: SBLC or DLC: MT 760 or MT 700 â?? Irrevocable, Unconditional, Transferable, Divisible, Operative, Revolving. Confirmed Bank TOP 50 for SBLC and for DLC confirmed Bank TOP 25. Inspection: SGS or Equivalent CiF PRICE USD: 180 per MT COMMISSION CHARGED SHIPMENT TIME within 10 days from LC DATE and DELIVERY within 35 to 45 days from the date of bill of ladings depending on the chosen port. NO, TTM/FTF Corn gluten meal is a by-product of the manufacture of maize starch (and sometimes ethanol) by the wet-milling process (RFA, 2008). Corn gluten meal is a protein-rich feed, containing about 65% crude protein (DM), used as a source of protein, energy, and pigments for livestock species including fish. It is also valued in pet food for its high protein digestibility (RFA, 2008). Its fiber is highly digestible by ruminants and corn gluten feed can be substituted for grains, such as maize grain, to reduce the starch load in the rumen This palatable, low-starch product is high in rumen-degradable protein, B vitamins, phosphorus, and highly digestible fiber. Product Ingredients: 100% Corn Gluten Feed. SPECIFICATIONS Type: Grain Variety: Corn grits Gluten Meal Use: Cattle, Chicken, Dog, Fish, Horse, Pig Moisture (%): 12%MAX Dry Matter 89% Crude Protein 23% Starch 8% Fat 3% NDF 33% Crude Fibre 9% Grade: First Grade Energy (ME)12.7 MJ/kg DM Packaging: 25/50kg Big Bags or In Bulk Available as: Fine powder Flour Granulate Feeding Recommendations Requirements will differ depending on the current diet. It is recommended a maximum of 20% (of the total ration) be fed on a dry matter basis. Corn Gluten Feed can be mixed with silage in the paddock, on the feed pad, or in blends. Consult your nutritionist or farm consultant to determine the optimal inclusion level for your particular situation.
Characters: Ivory powder or flake-shaped solid. It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 8.3. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (4) It can make hot and spicy food more pliable and softer and prolong the preservation time. (5) It can produce smoother surface, lower broken ratio, higher soaking and boiling resistance for noodle, dried noodle and instant noodle, and make them chewier. (6) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60 with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 % Technical Index Acid value(Calculated by KOH) / (mg/g) 60- 80 Ester value (Calculated by KOH) / (mg/g) 120- 190 Total lactic acid (W/%) 23.0-40.0 Sodium content(W/ %) 3.5- 5.0 Pb(mg/kg) 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:25 KG/CTN(5KG *5) or packaged with moisture proof paper bag, 25kg/bag. Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 5.1. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. It can react with amylose to delay and prevent the food aging. It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (2) It can make hot and spicy food more pliable and softer and prolong the preservation time. (3) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60 with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 %( Calculated by Flour, Refer to GB2760-2011) Technical Index Acid value (Calculated by KOH) / (mg/g) 50- 86 Ester value(Calculated by KOH) / (mg/g) 125- 164 Total lactic acid (W/%) 32.0- 38.0 Calcium content (W/%) 4.2- 5.2 Pb / (mg/kg 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5KG *4) or packaged with moisture proof paper bag, 25kg/bag Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
Characters: Straw yellow powder or granular solid which is easily soluble in oils and fats and soluble in organic solvents such as ethanol. It can be dispersed in hot water. It's an non-ionic surfactant with characteristics such as high temperature and acid resistance and HLB value is 7.2. Applications: This product is a kind of hydrophilic monoglyceride, and it can produce strong emulsification effect for oils and fats. 1. It can be used in margarine, butter, shortening oil and oyster sauce as emulsifier and crystal modifying additive to prevent oil-water separation and prolong the preservation period. 2 It can be used in food baking to make oils and fats dispersed more homogeneously in dough to get higher foamability and produce larger volume of product, fine and supple feeling in mouth. 3. It can be added into ice cream to make all components mixed more homogeneous, prevent forming of big ice crystal, help produce fine and dense pore structure, enhance its expansion ratio and produce smooth and fine feeling in mouth. 4. It can be used in milk beverage as emulsifier, wetting agent, cosolvent and so on. It can also enhance flavor, aroma and color of them. 5. It can be used in meat products to prevent starch aging, shrinkage, water absorption and hardening. 6. It can be used in candies and chocolates to prevent oil-water separation and maintain a good taste. Usage: (1) Since this product is easily soluble in oils and fats, you can dissolve it in oils or fats homogeneously before further processing. (2) You can also dissolve this product in warm water at about 6 homogeneously, and then mix it with other raw materials for further use. Recommended Adding Amount: The addition maximum is 0.01% for bread and pastry, the maximum is 0.3% for ice cream. Technical Index : Acid Value (mgKOH/g) 5.0 Saponification Value (mgKOH/g) 120-135 Iodine Value (g/100g) 3.0 Sulfated Ash Content % 1.0 Heavy Metal (Calculated by Pb)% 0.001 Arsenic(Calculated by As)% 0.0003 Melting Point () 53-58 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:25 KG/CTN(5KG *5) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
Characters: Ivory powder or flake-shaped solid. It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 8.3. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (4) It can make hot and spicy food more pliable and softer and prolong the preservation time. (5) It can produce smoother surface, lower broken ratio, higher soaking and boiling resistance for noodle, dried noodle and instant noodle, and make them chewier. (6) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60 with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 % Technical Index: Acid value(Calculated by KOH) / (mg/g) 60- 80 Ester value (Calculated by KOH) / (mg/g) 120- 190 Total lactic acid (W/%) 23.0-40.0 Sodium content(W/ %) 3.5- 5.0 Pb(mg/kg) 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:25 KG/CTN(5KG *5) or packaged with moisture proof paper bag, 25kg/bag. Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
Castor Oil Ethoxylates Pesticide Emulsifier BY/EL Series Synoynyms: Ethoxylated Castor Oil Castor Oil Ethoxylated Polyoxyethylenated Castor Oil Polyoxyethylene Castor Oil Castor Oil Polyoxyethylene Ether Cremophor EL Chemical Composition: Ethoxylated Castor Oil+20EO,32EO,34EO,36EO,40EO,51EO,60EO,85EO CAS No.:61791-12-6 Molecular Weight: Not available. Molecular Formula: C57H104O9(CH2CH2O)n EINECS No.: 500-147-5 HS Code:34021300 Quality Specification Type Appearance Water Percantage PH Value Cloud Point(C) Remarks BY-110 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 43-54 25% ethanol water BY-125* Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 75-80 1%H2O BY-125 0.5% 5.0-7.0 75-80 3% NaCl BY-140 0.5% 5.0-7.0 82-87 3% NaCl EL-10 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-20 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-32 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-36 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 EL-40 Yellow to brownish yellow semi liquid 0.5% 5.0-7.0 722 3% NaCl EL-60 Light yellow wax like solid 0.5% 5.0-7.0 EL-80 Light yellow wax like solid 0.5% 5.0-7.0 Properties and Uses: 1.Its yellow or brownish yellow liquid or semi liquid, or wax like solid. 2. Soluble in water and many kinds of organic solvents. 3. Its applicable to various emulsifiers, especially in organic phosphorus emulsifier, where it shows a prominent wetting and synergetic effect. Packing and Transport: This product is flame resisting, nontoxic, can be delivered according to common chemicals and packed in 200KG iron drum. Upload and handle with care to avoid collision. As per specific customer needs(available in bulk & small volume),the product can be made available with customized packing, like in plastic drum, galvanized iron drum, IBC drum etc Storage: Storage period: 1 year. Should be kept in dry and ventilated place.
