Potato flakes Free flowing potato flakes are produced from good quality potatoes after washing, peeling, inspection, slicing, precooking, cooling, cooking, drying and flaking to provide the size specification of the customer. The Size of the Potatoes been used is between 40 and 90 MM Dry Matter Content > 20% Foreign Material: Free of Foreign Material. Storage Temperature: 4-6 Degrees Celsius Flakes: Flakes are produced according to the specification of the client. Mostly the specifications of Standard Flakes are more or less the same over the world. Color: Normal Potato color Taste: Normal Potato Taste Texture: Not Slimy Not Sticky Reconstitution: When 100 GR. of whole flakes are reconstituted by hand stirring in 570 ml water at a temperature of 75 degree C, the product shall be non-glutinous, fluffy mass, resembling mashed potatoes and possessing the characteristic flavor of potatoes. Odor: Characteristic of Potatoes, free from typical odor. Flavor: Characteristic of Potatoes, free from taint. Defects: Black Points : 10 per 100 Gram Max Wet points : None Hard points : 15 per 100 Gram Max Additives/Chemical Characteristics: Moisture : 6% - 9% Monoglyceride emulsifier : 0.5% Max Sodium Pyrophosphate (% appr.) : 200 PPM Citric Acid Monoglyceride : 125 PPM Sulfur Dioxide (ppm appr.) : 100 PPM Antioxidant (ppm appr.) : 25 PPM Granulometri: Flaker with 6 MM Sieve > 2 MM : 57% Max < 2 and >1 MM : 32% Max < 1 MM : 11% Max Density: Flaker with 6 MM Sieve: circa 210 Gram / liter Stability: 120-140 MM Reducing Sugars: < 3% (Luft- Schoorl Method) Viscosity: Mpas/s (Brookfield Method) Particle Size: > 1000mu : 0% > 75 mu : 90% Bulk density : 65ªgr./1= 20gr./1 Metal detection: Metal detection is carried out on each bag of finished product. Microbiological Standards: Counter Plate : max. 10,000 Coliform :
Model : NF5280M3 Processor : Support 2 Intel Xeon processors of E5-2600 series Cache : 10MB, E5-2603, E5-2609 15MB, E5-262 E5-263 E5-2640 20MB, E5-265 E5-266 E5-2665, E5-267 E5-268 E5-2690 QPI bus rate : 6.4GT/s, E5-2603, E5-2609 7.2GT/s, E5-262 E5-263 E5-2640 8.0GT/s, E5-265 E5-266 E5-2665, E5-267 E5-268 E5-2690 Chipset : Intel C600 server chipset Memory : 24 DIMM, DDR3-1600 up to 512GB (32 GB per DIMM Support advanced memory ECC, Mirror, sparing. HDD controller : Integrated SATA controller, optional 8 channel SAS 3Gb/6 Gb disk controller RAID : Integrated SATA controller supports RAID 0/1/10/5 SAS controller support RAID 0/1/10, optional support RAID 5 50; Optional support RAID 0/1/5/6/10/50/60, with high performance SAS RAID controller which has cache and cache protection battery Storage : Up to support 24 pieces of hot-swap 2.5 inch SATA/SAS or SSD Expansion Slots : 1 PCI-E 3.0 x16 4 PCI-E 3.0 x8 (If only configure 1 processor, 1 PCI-E 3.0 x16 2 PCI-E 3.0 x8 available) I/O interfaces : Front 2 USB interfaces Rear 4 USB interfaces 1 standard VGA interface 1 serial interface 2 or 4 RJ45 GbE Ethernet interfaces 1 RJ45 Ethernet interface only for management, optional 2 RJ45 10GbE Ethernet interfaces Built-in 1 serial interface, 2 USB interfaces Network controller : Integrated 2 or 4 Gigabit network interfaces; support Virtualization Accelerator, network Accelerator, network redundancy and load balance, and two more optional 10GbE interfaces. Power Supply : 600W or 700W Power, optional 1+1 Redundant, optional support PMbus Power Graphics card : Integrated 16MB memory video controller CD-ROM : 8 or16 bays model with Slim DVD-RW 24 bays model optional with external USB DVD-RW Floppy Drive : Support optional virtual floppy drive of USB interface which based on flash memory Management Features : Integrated system management chipset, support IPMI2.0, KVM over IP, virtual media; support Inspur Ruijie series server management and deployment software. Optional LCD management module, with visual system monitor and fault diagnosis module OS supported : Microsoft Windows Server 2008 SP1 32/64bit Windows 2003 Enterprise with SP2 32/64bit Red Hat Enterprise Linux 5U3 32/64bit, SuSE Linux Enterprise Server 10 SP2 32/64bit SuSE Linux Enterprise Server 11 32/64Bit Operating Temperature : 5 AC input : 110-240V International Certification : ISO9001 International Quality Management System ISO14001 International Environment Management System. Chassis : H88mm W 430mm D 745mm Weight : 25kg.
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
Eddy current signal converter CON021 for power generation is a hi-tech company specializing in the production, development and sale of spare parts for power plant. The company in heavy-duty base . The company's product type has sealant, insulating material, filter, power plant, pump, valve, sensor processing parts, bearing and other goods, mainly used in chemical industry, power plant, steel and other areas. can offer many spare parts for power plants as below: #DF-Eddy current signal converter CON021-DF M6 thread TE-112 lvdt sensor 500TD thermocoupl 1000 TE-203 displacement inductive sensor ZDET200B cable pt100 WZPM2-08-78-M18-S lvdt linear position sensor HTD-150-6 k type thermocouple WRNK2-291 5 lvdt-sensor TD-1-0150-10-01-01 4mm rtd pt100 WZPK2-380B 8 dc speed control sensor SZCB-01-00-060-00-05 lvdt displacement sensor 5000TD displacement sensor ZDET-150B Pressure/Temperature Controller 703590/281-8800-833000-23-00/214 lvdt-sensor B151.36.09.04-013 inductive displacement sensor 1000TDZ-A lvdt full form TD-1-150-10-01-01 lvdt transducer B151.36.09.04-009 lvdt sensor B151.36.09.04-006 Eddy current signal converter CON021 LVDT Position Sensors TDZ-1E-21 displacement sensor DET200A type k thermocouple WRNK2-294 lvdt 20mm sensor HL-3-350-15 full form of lvdt 3000TDG lvdt working principle A157.33.01.31 Non-Contact Linear Displacement sensor LVDT-150-6 displacement sensor 191.36.09.15 thermometer gauge WSS-461 0~500 high temperature thermocouple WRNK2-221 pt100 rtd probe thermowell WRNK2-191M LVDT Displacement Sensors TDZ-1-04 lvdt 20mm sensor 191.36.09.13 RTD Temperature Sensor Element WZPK2336 speed sensor symptoms ZS-04 G-075-03-01 LVDT Displacement Sensors 3000TD sensor rpm CS-1-D-120-05-00 wzp pt100 WZPK-237S displacement inductive sensor B151.36.09G24 Magnetic Proximity Sensors CS-3-M10-L120 Limit Switch D4A-4501N 3 Wire RTD Sensor WZPK2-330 sensor de lvdt TD-1G-300-10-01-01 thermocouple k-type TE-104 sensor speed G-065-05-01 thermocouple sensor TE-106 sensor CEL-3581A/GF lvdt transducer TDZ-1-35 heating tube element GYQ speed sensor cost 143.35.191 linear displacement sensor 7000TDGN thermocouple wzpk 230 pt100 WRNK2-191M Magnetic Speed Sensors CS-1 L=75 lvdt 0-300 5000TD-3 inductive displacement sensor B143.35.07 Platinum Wire WRN2-630 LX1=225 76 Eddy current signal converter CON021 DFYL-2023-5-5-ZYR
made Transmitter Vibrasi Fan Dual vibration monitor PDM1201-AXX-B1-C0-D1- E2-F0 for power plant a strong manufacture and trade company. We have a wide range of mechanical parts and components generator parts, electrical and electronic products processing, hydraulic machinery and components, hydroelectric generating units, coal-fired generating units, especially professional accessories for generator units. The goods are absolutely authentic, rest assured. can offer many spare parts for power plants as below: DF-Transmitter Vibrasi Fan Dual vibration monitor PDM1201-AXX-B1-C0-D1- E2-F0-DF 5000 rpm torque sensor 70085-1010-414 3/4-20 lvdt 20mm sensor K151.36.06.005 sensor de lvdt DET250A thermocouple cable TE-402 temperature measurement sensor pt100 WZP2M-201 thermocouple k WRN2-4312 Analog Linear Displacement Sensor TDZ-1G-05 linear displacement transducer TDZ-1-05 pt100 thermal resistance WZP-201 lvdt linear position sensor ZD-10000TDA wzp pt100 WZPM2-08-75-M18-S ptfe pt100 temperature sensor WZPM-201Y thermocouple type WRN2-630 displacement sensor sany DET.2A.4000A displacement inductive sensor HL-3-250-15 LVDT Displacement Sensors B151.36.09.04-002 lvdt full form C9231116 k type thermocouple WRNK2-292 lvdt sensor ZDET200B pt100 digital thermometer WZPN2-002 speed sensor symptoms QBJ-CS-1 Preamplifier 330780-50-00 LVDT B151.36.09G19 Transmitter Vibrasi Fan Dual vibration monitor PDM1201-AXX-B1-C0-D1- E2-F0 thermocouple wzpk 230 pt100 WRNK2-221 tachometer gauge WZ-3C-A LVDT Position Sensors 5000TD-3 speed sensor symptoms CS-1-D-080-10-01 lvdt full form K156.36.06.003 platinum resistance thermometer WZP2M-201 lvdt-sensor DET100A cable pt100 WZPK2-338 temperature transmitter pt100 WZPM2 LVDT Displacement Sensors HL-3-500-15 thermocouple thermometer WRKK2-221 Bolt Heater RJ-17.5-900 lvdt probe HL-6-400-15 LVDT Displacement Sensors 4000TDZ-A AC POWER SUPPLY MODULE 3500/15 - 126399-01G full form of lvdt ZDET25B Digital RPM Meter D421.51U15VA Magnetic Speed Sensors SZXB-01-B01 VIBRATION PROBE 330104-00-12 output shaft speed sensor CS-01 inductive displacement sensor ZD-3000TDB lvdt displacement sensor LVDT-450-6 Rotation Speed Probe CS-02 full form of lvdt TD-1-50 lvdt full form ZDET500B sensor lvdt TD-1G-250 thermal contact resistance WZPK2-338 displacement transducer TD-1-250-10-01-0 lvdt displacement sensor inductive sensor C9231122 LVDT Position Sensor TDZ-1E-04 0-250 LVDT Sensor 268.33.01.01(3) LVDT 4000TDGN-15-01-01 rtd temperature WZPM-201 �5 Platinum-Rhodium Wire TE-304 rpm sensor indicator XS12J3Y electric cartridge heater GYY-230/400-2 Transmitter Vibrasi Fan Dual vibration monitor PDM1201-AXX-B1-C0-D1- E2-F0 DFYL-2023-3-13-ZYR
* Wide voltage range battery discharger: 12V to 280V * 5.7 inch LCD touch screen for easy operation and showing various parameters real time * Selectable discharge mode: constant current/power / resistance * 4 adjustable stop points and multiple alarm designs to control the discharge process intelligently * Support RS232 real time monitoring by PC or USB download data after discharge * PC software for capacity evaluation and report generation * Optional wireless modules for 1.2V/2V/6V/12V cells voltage real-time measuring. Overview: Although battery resistance testing methods are improving and very popular, battery discharge test still is the most accurate and reliable method for actual capacity evaluation of battery groups. Because only constant current discharge can perfectly simulate the working status under loading for batteries, power supply departments in many companies and utilities keep the periodic discharge testing in their maintenance management. Because the DC power systems in various industrial utilities are using different voltage level battery groups (24V, 48V, 110V, 120V, 220V, 240V etc.), and most of professional users hope to find an unattended and automatic instrument to simplify discharge process, the battery discharge tester with intelligent designs and super voltage variability for almost all battery types would be preferable. Features: Wide Range 840CT can support 10-300V battery groups, the application of 840CT includes: Battery Nominal Voltage: Max Discharge Current 240 V / 220 V: 60 A 120 V / 110 V: 120 A 96 V: 120 A 48 V: 120 A 24 V: 120 A 12 V: 60 A Multiple Adjustable Stop Points 840CT offers 4 adjustable points for test stop points to avoid excessive discharge: Stop Point: Setting Range Group Low Voltage: 0-250.0 V Discharge Time: 0-99 Hour 99 Min Discharge Capacity: 0-9999 AH Cell Low Voltage: 0-15.00 V. 840CT also offer selectable quantity of cells which voltages below the stop point, this design could help you to locate more lag batteries in once constant discharging. Selectable Discharge Modes 840CT provides 3 discharge modes for different test requirement: Discharge Mode: Range Constant Current: 0-120 A Constant Power: 0-14 Kw Constant resistance: 0.16 5.7 inch Touch LCD Display Super big size touch LCD can display all real time data and graphs and support the click operations directly, humanized input method and menu designs simplified operating process. Presetting Function: The presetting function for discharge parameters provide 8 locations for setting up all discharge parameters in advance, this design can skip the setting procedures for the same discharging, simplified the operation and speed up the test. Internal Memory: * 840CT can save several independent discharge records automatically without Laptop monitoring, non-volatile internal memory guarantee the data security even in unexpected shutdown. * The menu interface provides some management operations like reviewing, deleting, downloading to PC by USB disk or RS232. Optional wireless cells voltage monitoring * Wireless modules for cells voltage measuring are available for 1.2V/2V/6V/12V batteries voltage monitoring during discharge test. * Each wireless module can monitor 4 batteries simultaneously. Comparing with the traditional cable voltage measuring method that each module only can monitor 1 battery, the new wiring operation is much easier. * With proper number wireless modules, main tester can real time scan and display the voltage data of each battery during the discharging, and display the histogram of all batteries to follow the battery voltage tracks in whole discharging process. * Intelligent judge program: 840CT can identify the situations that the battery voltages reach the threshold value or the signal missing by manual mistake. Avoiding manual interruption in the discharging, this revolutionary program makes the test stable and smooth. * 840CT also supports cable modules for special requirements. Multiple Protections & Alarms: Malfunctions: LCD prompt: beep warning Input over-voltage Reverse polarity Overload Overheat 840CT provides ample protective measures for various abnormal situations during discharge. Automatic termination, LCD prompt and beep warning would assist users to make proper treatments. Extendable & Compatible: Connecting with clamp current, 840CT cooperate other types in -CT series or any other load units, and clamp current can count external current in. PC ANALYSIS SOFTWARE: * Support data downloading and analyzing through real time communication or USB memory devices * The software interface includes: battery voltages curve and bar chart, battery resistances bar chart, group voltage curve, current curve, capacities histogram, data form and so on. * Powerful capacity estimating function, the software can predict the capacity of each battery in the tested group. * The software shows the data by various ways like bar charts, curve, and form. And users can magnify or minify any windows to read more details. * Automatically create EXCEL data report, it¡¯s so convenient to send or download the data. SPECIFICATIONS: Discharge Ranges Voltage range: current range 10-15V: 0-60A 15V-60V: 0-120A 86-150V: 0-120A 190-280V: 0-60A Current measurement: Internal current range: 0-120A Accuracy &resolution: 0.5%, 0.1 A External current range: 0-600A(optional current clamp) Accuracy &resolution: 1%, 0.1 A Voltage measurement Group voltage range: 0-300 V Accuracy &resolution: 0.5%, 0.1 V Cell voltage range: 0-15V Accuracy &resolution: 0.5%, 0.01 V Power Supply Power supply voltage: 220 V AC (-20% to +30%) Frequency: 50/60 Hz Power consumption:: 350W(max) Communication & Storage Communicate port: USB/RS232 Internal memory: 8Mbit Flash CE Certificate: LVD standards : 2006/95/EC:EN 61010-1:200 EMC standards: 2004/108/EC Annex II: EN 61000-6-1:2007 EN 61000-6-3:2007 EN 61000-3-2:2006+A2:2009 EN 61000-3-3:2008 Environment: Operation temperature: -5 to 50o C Storage temperature: -40 to 70o C Humidity: 5% - 95% RH Altitude: below 4000 m Working noise:
1KW broadcasting transmitter for professional radio station: Product characteristics: 1 KW transmitter is a professional FM stereo transmitter for radio broadcasting station; The 1 KW power amplifier unit has high gain, high stability, high efficiency and high redundancy; The exciter unit use advanced Digital Signal professor (DDS+DSP) so it can provide over CD level sound quality; The MCU control system can accurately protect transmitter from damage caused by over-current, over-voltage, over-VSWR, or over-temperature. 1KW transmitter Parameters Technical Description: Frequency: 87.5108 MHz Customized 70~110 MHz Frequency step: 100KHz Customized 5KHz Modulation: FM Peak deviation: ±75 KHz Frequency stability: ï¼?±100Hz Phase-locked Loop: Phase locked Loop Power stability: 0~1KW±0.5 Db Harmonic: ï¼?±65dBc Output impedance: 50Ω Output connector: L27 Customized L16 or L27 Audio input: XLR S/N: 70 dBc (20~20 KHz) Mono 65 dBc (20~15 KHz) Stereo Stereo separation: ï¼?55dB from 30Hz to 15kHz THD ï¼? 0.5% 30Hz to 15kHz Power efficiency: 62% Input level: -40 dBV ~0dBV Product Description: Power: 1KW (57 dBm) Operating temperature: -10~45 Working time: 24 hours Size: 600mm*600mm*400mm Reference range: 20km-25km Weight: 25kg Power supply AC220V 50/60Hz
S and mosaic phenomenon of picture, the actual color reproduction; sound is clear and high fidelity. 7. Extensible wifi transmission. 8. Provide communication protocol for software development sdk and device management control which can integrate seamlessly with third application platform. Technology features: Interface Video output 2*bnc sdi Analog audio input 1* industrial terminal blocks, unbalanced connection Analog audio output 1* industrial terminal blocks, unbalanced connection Alarm semaphore 1* industrial terminal blocks, Rs-485 1* industrial terminal blocks, Network 1*rj-45, ethernet connected Power supply Dc 12v, 2a¡ê¡§external power supply¡ê© Signal Sdi signal amplitude 0.8vp-p Sdi impedance 75 ohm Sdi coupling type Ac Output signal type Sd-sdi(270mbps)¡¡éhd-sdi(1.485gbps) Supported formats 1080p24/25/30¡¡é1080i60/50¡¡é720p60/50¡¡é480i/576i Decoding Video compression standard H.264 Audio compression standard Aac-lc Decoding delay ¡¨¹150ms Transmission Media transmission protocols Rtp/rtsp¡ê¬compatible rtp over tcp transmission mode Signaling¡¡transparent transmission protocols Tcp Network management protocols Http / windtalk¡ê¡§exclusive protocol¡ê© Management Management interface Web Remote management Support Remote firmware upgrade Support Operation environment Operation temperature 0¡æ ~ 80¡æ Relative humidity 20 ~90%rh¡ê¡§non-condense¡ê© Overall unit power dissipation ¡¨¹5w Outer carton dimension:26*24*8 cm Weight: 1.2kg Packing: package by carton
CPU Solution Ali3606 SDRAM 16MBytes Flash 2MBytes Language Support It can be added Arabic,Deutsch,English, Espanol,French, Italian, Polish, Portuguese, Russian Turkishand so on multi-country language High Frequency Tuner Input Frequency Range 950-2150MHz Input Signal Level QPSK:-65dBm¡«-25dBm RF Input Connector F-type,IEC169-24,Female Input impendance 75¦¸ TV Standard Auto,PAL,NTSC DisEqc Control DiSEqC 1.0&1.2,USALS compatible Demodulation Mode Wave form COFDM£¨Code Orthogonal Frequency Division Multiplexing£© Demodulation QPSK Transmission Mode 2K,8K Guard interval 1/4,1/8,1/16,1/32 Code rate 1/2,2/3,3/4,5/6,7/8 Video, Audio decoding Video decoding MPEG-1/MPEG-2 Main Profile @ Main Level Video resolution 480i/576i/480P/576P/1080i Audio decoding MPEG-1 layer 1 & 2, MP3,Dolby Digital/DTS Bitstream output Audio decoding Stereo, Left, Right Multimedia play format ¡¡ H.264,MPEG2,DivX,TS,MKV,TP,AVI,VOB,DAT,MPG,MPEG,MOV,AAC,MP3,WMA,JPG,BMP,JPEG,PNG. USB 2.0 Support file format MP3, JPEG, OGG or BMP Support hard disk FAT/NTFS Operation condition Range of rated voltage 90 ~ 250V, 50/60Hz Rated consumption
Features: 1) High quality, high linearity DFB laser 2) Advanced pre-distortion function 3) 1U, 19 inch standard chassis, 220VAC, 50Hz switching power supply or others. 4) 750 or 862 MHz bandwidth, supporting most broadband transport applications. 5) Unique thermal design provides superior heat dissipation, increasing the reliability of your system. 6) Automatic gain control helps maintain constant RF drive level to laser for consistent performance. 7) An interface LCD display allows you to monitor the transmitters performance. In addition, RS232 helps you monitor your transmitter performance in a long-distance Specifications Item Unit Specification Bandwidth MHz 47-750 or 860 Optical Wavelength nm 1310 (í+ 20) Optical Output Power (í+ 0.25 dB) (4~20mW) all series Safety Power Shutdown Yes Input RF Power, Main (í+ 0.1 dB) dBµV 72.0(+3/-2) Isolation, Auxiliary to Main Input dBc -32 AGC Input Range dB í+ 3 Response Flatness (maximum) dB í+ 0.75 Response Slope dB 0 to 0.75 Input Impedance ª+ 75 Input Return Loss dB >14 RF Test Point (í+ 1.0 dB) dB -20 Carrier-to-Noise Ratio (CNR) dB >51.0 Composite Second Order (CSO) dBc í_60 Composite Triple Beat (CTB) dBc í_65 Powering V AC220í+10% Power Consumption (maximum) W 40 Mechanical Specifications Optical Connector FC/APC, or SC/APC RF Connector F-Type Dimensions (height í- width í- depth) cm 4.3í-48.5í-30.0 Environmental Specifications Ambient Temperature -25+65 Operating Temperature Range 0-50 Notes: Optical link budget that provides a C/N of 51 dB when loaded with 59 PAL-D channels over a 10km single fiber. Composite Triple Beat (CTB) is 65dBc typical (all models) Composite Second Order (CSO) is -60dBc typical (all models) Specifications are subject to change without notice. 6KG
Our mainly produces are high-precision, low-noise deep groove ball bearing, auto hub bearing, precision bearing, high-speed & precision bearing, shaft bearing and motor bearing. Our products are mainly sold to usa, japan, korea, brazil... Twenty countries around world. Auto bearings are supplied to famous car company. Turned rings are oem for famous bearing company. We passed ts16949 and iso14001 in 2009. , 0.14 1206 , 1206k , 30 , 62 , 16 , 1 , 15.8 , 4.65 , 10000 , 12000 , 0.22 1207 , 1207k , 35 , 72 , 17 , 1.1 , 15.9 , 5.1 , 8500 , 10000 , 0.32 1208 , 1208k , 40 , 80 , 18 , 1.1 , 19.3 , 6.5 , 7500 , 9000 , 0.42 1209 , 1209k , 45 , 85 , 19 , 1.1 , 22 , 7.35 , 7100 , 8500 , 0.47 1210 , 1210k , 50 , 90 , 20 , 1.1 , 22.8 , 8.1 , 6300 , 8000 , 0.53 1211 , 1211k , 55 , 100 , 21 , 1.5 , 26.9 , 10 , 6000 , 7100 , 0.71 1212 , 1212k , 60 , 110 , 22 , 1.5 , 30.5 , 11.5 , 5300 , 6300 , 0.9 1213 , 1213k , 65 , 120 , 23 , 1.5 , 31 , 12.5 , 4800 , 6000 , 1.15 1214 , 1214k , 70 , 125 , 24 , 1.5 , 35 , 13.8 , 4800 , 5600 , 1.3 1215 , 1215k , 75 , 130 , 25 , 1.5 , 39 , 15.7 , 4300 , 5300 , 1.41 * please visit www.Baimu-sh.Com for more information of inch deep groove bearings, ball bearings, roller bearings, precision bearings, automobile bearings, special bearings, precision steel tube. Oem(chinese no.5 biggest bearing company)
Low maintenance cost and easy installation Long lasting performance: No maintenance and repair for 6 years â?¢ Intelligent information can be output by providing advanced statistical data and diagnostic programs â?¢ Maximum tolerance of Class 1 meter: 1% in convection area ( Q2 â?¤ Q â?¤ Q4) 3 % in small area (Q1 â?¤ Q â?¤ Q2) [ SPECIFICATIONS ] * Measuring caliber 25 mm ~ 1,200 mm * Domestic Approval : 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm, 200 mm, 250 mm, 300 mm, 350 mm * Composition : Detection unit: Electronic sensor / Conversion unit: input unit, operation unit, output unit, indicator * Accuracy Full Scale: 0.2% (65 mm ~ 250 mm: 1st grade / 50 mm, 300 mm, 350 mm: 2nd grade) * Max. Measureable Flow Rate : 10 m/s * Display unit and contents : Accumulated flow (m3): 9 digit x 1 (forward, reverse, modification available) Instantaneous flow rate (m3 / h): 4 digits, date, time, alarm (battery life and empty pipe) and data logger * Measurement function : Low flow cut off: 0 ~ 9 of maximum flow * Measurement frequency : Battery Type : 1/5 Hz / AC Type : 6.25 Hz * Max working pressure : 1.0 MPa ~ 1.6 MPa * Input : 4 ~ 20 mA pressure gauge signal (Loop Powered Terminal): AC Type * Output : 1 Instantaneous flow rate (4 to 20 mA) 1 - AC Type 2 accumulated flow (O.C Pulse) - Pulse Load 5 ~ 35 V DC / 50 mA (Common for AC & Battery Type) * Liner : Hard Rubber * Electrode Hastelloy C * Housing/Flange : Carbon Steel * Communication and internal memory : RS 485 MODBUS: AC Type / Internal memory: Date, time, instantaneous flow rate, accumulated flow rate, and pressure Memory interval: 5 seconds ~ 24 hours (1 year storage upon 1 minute interval storage) * Power Battery Type : 3.6 V DC (Life span 7 years) / AC Type : 110 ~ 220 V AC * Temperature : Ambient temperature: 20 ~ 60 / Storage temperature: 30 ~ 70 (humidity up to 95%) * Protection class : Detection unit (IP 68) / Converter (IP 65) [ APPLICATIONS ] Water industry / Wastewater treatment industry For more details on quality Korean flowmeters, please feel free to visit http://www.hnl-global.com/flowmeter and contact us.
[ CHARACTERISTICS ] Low maintenance cost and easy installation Long lasting performance: No maintenance and repair for 6 years Intelligent information can be output by providing advanced statistical data and diagnostic programs Maximum tolerance of Class 1 meter: 1% in convection area ( Q2 â?¤ Q â?¤ Q4) 3 % in small area (Q1 â?¤ Q â?¤ Q2) [ SPECIFICATIONS ] * Measuring caliber 25 mm ~ 1,200 mm * Domestic Approval : 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm, 200 mm, 250 mm, 300 mm, 350 mm * Composition : Detection unit: Electronic sensor / Conversion unit: input unit, operation unit, output unit, indicator * Accuracy Full Scale: 0.2% (65 mm ~ 250 mm: 1st grade / 50 mm, 300 mm, 350 mm: 2nd grade) * Max. Measureable Flow Rate : 10 m/s * Display unit and contents : Accumulated flow (m3): 9 digit x 1 (forward, reverse, modification available) Instantaneous flow rate (m3 / h): 4 digits, date, time, alarm (battery life and empty pipe) and data logger * Measurement function : Low flow cut off: 0 ~ 9 of maximum flow * Measurement frequency : Battery Type : 1/5 Hz / AC Type : 6.25 Hz * Max working pressure : 1.0 MPa ~ 1.6 MPa * Input : 4 ~ 20 mA pressure gauge signal (Loop Powered Terminal): AC Type * Output : 1 Instantaneous flow rate (4 to 20 mA) 1 - AC Type 2 accumulated flow (O.C Pulse) - Pulse Load 5 ~ 35 V DC / 50 mA (Common for AC & Battery Type) * Liner : Hard Rubber * Electrode Hastelloy C * Housing/Flange : Carbon Steel * Communication and internal memory : RS 485 MODBUS: AC Type / Internal memory: Date, time, instantaneous flow rate, accumulated flow rate, and pressure Memory interval: 5 seconds ~ 24 hours (1 year storage upon 1 minute interval storage) * Power Battery Type : 3.6 V DC (Life span 7 years) / AC Type : 110 ~ 220 V AC * Temperature : Ambient temperature: 20 ~ 60 / Storage temperature: 30 ~ 70 (humidity up to 95%) * Protection class : Detection unit (IP 68) / Converter (IP 65) [ APPLICATIONS ] Water industry / Wastewater treatment industry
GST-01 Gel Strength Tester Significance of Gel Strength Testing Gel strength stands as a pivotal quality parameter across diverse industries, particularly in sectors like food production. Notably, in the realm of surimi processing, gel strength serves as a decisive factor governing the texture and excellence of surimi-derived products such as imitation crab meat. This metric significantly influences the mouthfeel, solidity, and overall sensory experience of the product. Understanding Gel Strength gcm The evaluation of gel strength is a procedural necessity, especially within food sectors like surimi processing. At its core, the gel strength test is aimed at scrutinizing the texture and caliber of gels, predominantly within industries reliant on gel-based products. Purpose: The gel strength assessment gauges a gel's capacity to endure deformation when subjected to an external force. This evaluation method is frequently employed to ascertain the texture and uniformity of gels, particularly those formed from proteins present in surimi (a paste derived from fish or meat). Principle: During the test, a punch probe, possessing specific dimensions, compresses the surface of a gel specimen at a constant rate of deformation until puncture occurs. Typically, a speed of 60mm/min and a probe diameter of �?5mm are utilized. Gel strength is derived from force multiplied by distance, thus denoted in "gcm." Technical Features of GST-01 Gel Strength Tester The GST-01 Gel Strength Tester boasts industrial-grade stability facilitated by PLC control, alongside intuitive HMI touch screen operation. Key Features: - Equipped with a 7-inch HMI touch screen, ensuring user-friendly navigation. - Incorporates a precision ball lead screw mechanism for meticulous speed and displacement control. - Custom-designed program offers flexibility in executing gel strength tests. - Multiple fixtures enable diverse texture analyses. - Safety prioritized with features like travel limit protection, automatic returning, and load cell protection cover. - Offers a range of test items including weight, peak, and distance measurements. - Features a dot matrix microprinter for comprehensive documentation. - Optional RS 232 port and professional software facilitate advanced data management. Test Items Covered: - WEIGHT: Measures distance at a specified load. - PEAK: Evaluates gel strength. - DISTANCE: Measures load at a specific distance. Main Parameters Test Range: 0-50N (or as required) Stroke: 110mm (without probe) Test Speed: 1~100mm/min Displacement Accuracy: 0.01mm Accuracy: 0.5% F.S. Control: PLC and human machine interface Output: Screen, Microprinter, RS232(optional)
Hexagonal wire netting(chicken wire) Hexagonal wire netting is also called chicken wire, its materials with high quality low carton steel wire or stainless steel wire etc, as our leading goods, it could make electro galvanized, hot dipped galvanized and pvc coated , the varieties as follows: 1) electro galv. Hexagonal wire netting :galv. After weaving 2) electro galv. Hexagonal wire netting : galv. Before weaving 3) hot dipped galv. Hexagonal wire netting : galv. After weaving 4) hot dipped galv. Hexagonal wire netting : galv. Before weaving 5) pvc coated hexagonal wire netting 6) stainless steel hexagonal wire netting The above products could weave in continuous twist or reverse twist with extension wires. Application : it used wide in building, oil, chemical industry, breed, plant protection , food processings reinforce guard and heat preservation , for example: make net cast , stone cage , insulated net wall , boiler cover , poultry fence etc. Galvanized hexagonal wire netting Opening Wire gauge Width per roll Inch Mm Tolerance Bwg Mm Feet Meter 3/8" 10 +0.5 Bwg 27-23 0.41-0.64mm 1'-6' 0.1-2m 1/2" 13 -1.5 Bwg 27-22 0.41-0.71mm 1'-6' 0.1-2m 5/8" 16 +1.0/-2.0 Bwg 27-22 0.41-0.71mm 1'-6' 0.1-2m 3/4" 19 +1.0/-2.5 Bwg 26-20 0.46-0.89mm 1'-6' 0.1-2m 1" 25 +1.5 Bwg 25-29 0.51-1.07mm 1'-6' 0.1-2m 1.25" 31 -3.0 Bwg 24-18 0.56-1.24mm 1'-6' 0.2-2m 1.5" 40 +2.0/-4.0 Bwg 23-16 0.64-1.65mm 1'-6' 0.2-2m 2" 51 +2.0/-4.0 Bwg 22-14 0.71-2.11mm 1'-6' 0.2-2m 3" 76 +2.0/-4.0 Bwg 21-14 0.81-2.11mm 1'-6' 0.3-2m 4" 100 +2.0/-4.0 Bwg 20-12 0.89-2.8mm 1'-6' 0.5-2m Remarks: 1. Special sizes are available upon request.. 2. Packing: in waterproof paper or carton. Customer's packing is available upon request.
Steam turbine parts Gap Transmitter GJCF-15 Dongfang Yoyik Engineering Co., Ltd is located in Deyang, Sichuan, provides different kinds of industrial products and brands. Our company is specialized in researching and developing hear-resisting and wear-resisting materials. As a pump and valve manufacturer ourselves, we also offer other brands both domestic and from abroad. YOYIK provides multiple types of spare parts and equipments for power plant : Pressure Switch RC861CZ090HY914 Differential Pressure Transmitter RC0113CZ097Z REGULATOR AIR PRESSUREP ROTECTIVE SHELTER AW30-2G Exciter Cabinet Gauge 3BHB006943R0001 Speed Sensor DF6101-005-065-02-03-00-00 Sonic Sensor DZXL-V 12VDC Bolt Electric Heater ZJ-20-3A STICK BOLT HEATER ZJ-20-8B MSV LVDT 191.36.09.07 Steam Turbine Bolt Electric Heater ZJ-20-27 Pressure Switch BH-031009-031 GEAR BOX COOLING TOWER LF92 - 400A Preamplifier 330780-50-00 GDI Rectifier Bridge Gate Drive Card UNS0881 LVDT Sensor 191.36.09(1).03 0±50.8mm Braun Card D421.51U1 Diff pressure Switch CS-V STN BC Network module 369B1840G0014 Rotation Speed Sensor CS-1 D-065-05-01 BENTLY Preamplifier 330180-90-00 Rotation Speed Probe DF6101 Sensor CS-1 L100 Displacement Transducer HTD-150-3 Shaft Displacement Probe DF311106/000/060/10/02/00 Gap Transmitter GJCF-15 LVDT Position Sensor 2000TDGN Communication Conversion Module GES3000 7520/7520A BFP Rotation Speed Probe CS-1-G-075-03-01 temperature sensor 4Q15244 plant, gapmeasupe probe GJCT-15-E LVDT HP BY PASS 2000TD Oil Tank Level Transmitter MPM626W6E22C3 Speed card DMOPC003 Differential pressure switch 431137-SLM562 0.02-0.21Mpa steam turbine bolt heater ZJ-22-34 Remote I/O collection box DY-24C CARD MODULE DMSVC001 Pressure Switch HC0618-24 Sensor D-090-02-01 LVDT Position Sensor DET800A Servo valve S15F0FA4VBLN BENTLY Cable 330103-00-04-10-02-00 Bellows GJCFB-15 Preamplifier CWY-DO-20Q08-50V Pressure Switch BH-043004-043 DETECTOR LEAK LH1500 LVDT Position Sensor ZDET-50B Probe TM0180-A08-B00-C09-D05-E01 LVDT Position Sensor 191.36.09.01 ±127mm Steam Turbine Bolt Electric Heater ZJ-16.5-9 Excitation AVR Power Supply ACE-716C steam turbine bolt heater ZJ-17-1(R) CARD MODULE DMSVC001 LVDT Position Sensor TD-1 0-50 LVDT Displacement Sensor DET100A Gap Transmitter GJCF-15 [2020-3-4-DFMY]
Signal Transmitter GJCF-15 for power plant The company has a large flow, high discharge pressure, good performance, high efficiency, long life, high reliability, special for the technical valve products. Our company's main products: hydraulic machinery and components, hydroelectric generating units; coal-fired generating units; generating units; electrical and electronic products processing; mechanical parts processing. Mainly engaged in the power industry host (steam turbine, water machine, boiler, turbine) accessories, spare parts, spare parts, auxiliary equipment and environmental protection equipment. can offer many spare parts for power plants as below: DF-Signal Transmitter GJCF-15-DF lvdt full form TDZ-1D-03 thermocouple wzpk 230 pt100 WRNK-221 electric tubular Heater JHG03-B 380V 6kv type k thermocouple WRNK2-221 lvdt position sensor LVDT-25-6 rtd pt100 4Q15244 displacement inductive sensor C9231128 rtd cable WZPM2-08-75-M18-S rotation sensor CS-3-M10-L140 input speed sensor DF6101 thermocouple temperature sensor TKWRE2-230T 6 Non-Contact Linear Displacement sensor TDZ-1G-03 thermocouple wzpk 230 pt100 WRNK-321 RPM Sensor magnetic YD62-A02-B89mm-C01 thermowell stainless WRN2-630 120v tubular heater ZJ20.3-500R pt100 temperature transmitter WZRK-105 5 full form of lvdt TDZ-1E-04 lvdt transducer displacement K156.33.31.04G02 Pressure Switch RC861CZ090HY908 industrial displacement sensor LVDT-300-3 Signal Transmitter GJCF-15 lvdt 0-300 LVDT-150-6 sensor pt100 WZPM2-001 LVDT Position Sensors ZDET1000B lvdt sensor ZDET-100B shaft rotation sensor CS-3-M10-L200 output speed sensor ZS-03 L=90 sensor de lvdt 2000TDZ-AG rpm sensor indicator ZS-04 L=90 Rotary encoder OVW2-10-2MHC (050-00EA) Non-Contact Linear Displacement sensor C9231116 lvdt full form 5000TDGN-80-01-01 shaft rotation sensor 330103-00-08-10-02-00 Pressure Switch 851580801 0.02-0.1Mpa Explosion-proof: EXEDIIT4-T6 ceramic thermocouple TC03A2-KY-2B/S17 thermistor TE-207 bolt heater for mechanic ZJ-20-26A dual sensor rtd WZPM-325 25mm thermocoupl 1000 WRNK2 linear displacement sensor DET400A high temperature sensor WZP2-2212A Double Thermal Resistance WZP2-001 lvdt displacement sensor inductive sensor 6000TD-10-01-01 lvdt transducer displacement B152.33.01.01(2) Analog Linear Displacement Sensor B152.33.01.01(2) dc speed control sensor 159.00.96.03(1) PU-1-4SD Thermometer Water-proof WK-P2T(TH) LVDT Position Sensors DET-20A High Temperature Gauge WSS-461 350 DIGITAL INPUT TERMINATION UNIT NTDI01 non-contact displacement sensor TDZ-1E-41 temperature sensor pt100 WZPM2-08-035-M18-S Cable Type RTD Sensor WZP2-280 pressure sensor switch RT1211.0~0bar thermocouple range WRNN2-4325 Rotary Torque Sensor CS-3-m16x1-60 digital tachometer rpm meter DF9011-B Signal Transmitter GJCF-15 DFYL-2023-5-6-ZYR
Fusion splicer pt-660 Features Color lcd monitor and 256x magnification Compact and lightweight Reversible monitor with control panel on each side Maximum wind velocity: 15m/s 8sec splice time, 40sec tube-heat time Simultaneous x and y views Large capacity internal battery System test: ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8, 000 groups of splice results Multiple language options Specification Model Pt-660 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 8 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 8(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Usb 1.1 and vga Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 170mm(l) x170mm (w) x140mm (h) Weight 2.7 kg excluding battery, 3.3 kg including battery
SV Trade has diversified into supplying & Exporting of Galvanized Steel Pipes (G.I Pipes) . Size Range: 1/2" to 8" Diameter. Specification: IS-1239, BS-1387, ASTM A53 Gr. A, DIN specifications Thickness: Starting from 1.50mm to 7.00MM, depending upon the Size or as per the requirement of the customers DIMENSIONS, NOMINAL WEIGHT ETC. OF BLACK & GALVANIZED TO BS : 1387/ASTM A-120 NB & SERIES APPROX. OUTSIDE WALL THICKNESS APPROX. WEIGHT OF TUBES SOCKETS PLAIN END SCREWED & SOCKETED MM MIN. MM MAX. MM MM GAUGE KG / MTR MTR / MT NO. OF PIPES KG / MTR MTR / MT NO. OF PIPES O . D. LENGTH 15 L M H 21.0 21.4 2.0 14 0.947 1055 175 0.956 1046 174 27.0 37 21.1 21.7 2.6 12 1.21 826 137 1.22 819 136 -- -- 21.1 21.7 3.2 10 1.44 694 115 1.45 689 114 -- -- 20 L M H 26.4 26.9 2.3 13 1.38 724 120 1.39 719 119 32.5 39 26.6 27.2 2.6 12 1.56 641 107 1.57 636 106 -- -- 26.6 27.2 3.2 10 1.87 534 89 1.88 531 88 -- -- 25 L M H 33.2 33.8 2.6 12 1.98 505 84 2.00 500 83 39.5 46 33.4 34.2 3.2 10 2.41 405 69 2.43 412 68 -- -- 33.4 34.2 4.0 8 2.94 341 57 2.96 338 56 -- -- 32 L M H 41.9 42.5 2.6 12 2.54 394 66 2.57 389 65 49.0 51 42.1 42.9 3.2 10 3.10 322 54 3.13 319 53 -- -- 42.1 42.9 4.0 8 3.79 264 44 3.82 261 43 -- -- 40 L M H 47.8 48.4 2.9 11 3.23 309 52 3.27 305 51 56.0 51 48.0 48.8 3.2 10 3.57 280 47 3.61 277 46 -- -- 48.0 48.8 4.0 8 4.38 229 38 4.42 226 37 -- -- 50 L M H 59.6 60.2 2.9 11 4.08 245 41 4.15 241 40 68.0 60 59.8 60.8 3.6 9 5.03 199 33 5.10 196 32 -- -- 59.8 60.8 4.5 7 6.19 161 27 6.26 159 26 -- -- 65 L M H 75.2 76.0 3.2 10 5.71 175 29 5.83 171 28 84.0 69 75.4 76.6 3.6 9 6.43 156 26 6.55 153 25 -- -- 75.4 76.6 4.5 7 7.93 126 21 8.05 124 20 -- -- 80 L M H 87.9 88.7 3.2 10 6.72 149 25 6.89 145 24 98.0 75 88.1 89.5 4.0 8 8.37 120 20 8.54 117 19 -- -- 88.1 89.5 5.0 6 10.30 97 17 10.50 95 16 -- -- 100L M H 113.0 113.9 3.6 9 9.75 102 17 10.00 100 16 124.0 87 113.3 114.9 4.5 7 12.20 82 14 12.50 80 13 -- -- 113.3 114.9 5.4 5 14.50 69 12 14.80 67 11 -- -- 125M H 138.7 140.6 5.0 6 16.60 60 11 17.10 58 10 151.0 96 138.7 140.6 5.4 5 17.90 56 9 18.40 54 8 -- -- 150M H 164.1 166.1 5.0 6 19.70 51 9 20.30 49 8 178.0 96 164.1 166.1 5.4 5 21.30 46 8 21.90 45 7 -- --
Apple iphone iPhone is a revolutionary new mobile phone that allows you to make a call by simply tapping a name or number in your address book, a favorites list, or a call log. It also automatically syncs all your contacts from a Windows PC, Mac, or Internet service. And it lets you select and listen to voicemail messages in whatever order you want +óGé¼GÇ¥ just like email. iPhone is available in an 8GB model and a new 16GB model. Size and weight * Height: 4.5 inches (115 mm) * Width: 2.4 inches (61 mm) * Depth: 0.46 inch (11.6 mm) * Weight: 4.8 ounces (135 grams) Dimensions In the box * iPhone * Stereo Headset * Dock * Dock Connector to USB Cable * USB Power Adapter * Documentation * Cleaning/polishing cloth iPhone Box Capacity * 8GB or 16GB flash drive1 Display * 3.5-inch (diagonal) widescreen Multi-Touch display * 480-by-320-pixel resolution at 163 ppi * Support for display of multiple languages and characters simultaneously Operating system * OS X GSM * Quad-band (850, 900, 1800, 1900 MHz) Wireless data * Wi-Fi (802.11b/g) * EDGE * Bluetooth 2.0+EDR Camera * 2.0 megapixels Audio * Frequency response: 20Hz to 20,000Hz * Audio formats supported: AAC, Protected AAC, MP3, MP3 VBR, Audible (formats 1, 2, and 3), Apple Lossless, AIFF, and WAV Video * Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per second, Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats iPhone Headphones Headphones * Stereo earphones with built-in microphone * Frequency response: 20Hz to 20,000Hz * Impedance: 32 ohms Mac system requirements * Mac computer with USB 2.0 port * Mac OS X v10.4.10 or later * iTunes 7.5 or later Windows system requirements * PC with USB 2.0 port * Windows Vista Home Premium, Business, Enterprise, or Ultimate Edition; or Windows XP Home or Professional with Service Pack 2 or later * iTunes 7.5 or later Environmental requirements * Operating temperature: 32+é-¦ to 95+é-¦ F (0+é-¦ to 35+é-¦ C) * Nonoperating temperature: -4+é-¦ to 113+é-¦ F (-20+é-¦ to 45+é-¦ C) * Relative humidity: 5% to 95% noncondensing * Maximum operating altitude: 10,000 feet (3000 m) Input and output * iPhone o 30-pin dock connector o 3.5-mm stereo headphone minijack * iPhone Dock o Dock connector Power and battery * Built-in rechargeable lithium ion battery * Talk time: Up to 8 hours2iPhone on Dock * Standby time: Up to 250 hours3 * Internet use: Up to 6 hours4 * Video playback: Up to 7 hours5 * Audio playback: Up to 24 hours 100% original branded NEW iphone. MQR:5pieces/order,EUROPE distributor. *Original factory sealed box. The iphone can be Locked or Unlocked,100% made by APPLE, BRAND NEW, including ALL accessories.