Z Premium Neat Cutting Oil are used in a variety of machining operations e.g. grinding, turning, milling, broaching, drilling, tapping, gear cutting etc. primarily to provide cooling and lubrication which lead to good tool life and appropriate surface finish of the components being machined.
Z Premium Hydraulic Oil 68 -They provide long service life and are recommended for hydraulic and circulation systems of a wide variety of equipment. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipment having silver-coated components.
Z Premium Vacuum Pump Oil serves as a mechanical lubricant and a medium for trapping gas molecules. It's chemically stable, unreactive to most gases and materials, and has a low-vapor pressure.
Z Premium Sewing Machine Oil, is a lubricant specifically made for sewing machine parts, recommended to be used approximately every 8 hours of sewing. The use of sewing machine oil lessens the friction between the machine's parts, keeping them from grinding on one another and wearing down.
Base Oil Group I Sn 100, Sn 150, Sn 500, Sn 650, Brightstock Group Ii 110n, 150n, 230n, 500n, 600n Group Iii 2 Cst, 4 Cst, 6 Cst, 8 Cst Group Iv Pao 2 Cst, Pao 2.5 Cst, Pao 4 Cst, Pao 5 Cst, Pao 6 Hvi, Pao 6 Cst, Pao 7 Cst, Pao 8 Hvi, Pao 8 Cst, Mpao 65 Cst, Mpao 100 Cst, Mpao 150 Cst Group V Blown Oils, Wax / Slack Wax, Nahpthenichs, Re-refined Oils, Rubber Process Oils Low Viscosity Mhc 4, Mhc 9, Aramcoultra 2, Aramcoultra 3 Process Oil Po 100, Po 150, Po 500, Mp 100, Mp 105, Mp 150, Mp 230, Mp 600 Additives Packages Four Stroke Engine Oil Additive Passenger Car Motor Oil Additive (Pcmo) Heavy-duty Engine Oil Additive (Hddo) Gear Oil Additive Automatic Transmission Fluid Additive (Atf) Hydraulic Oil Additive Viscosity Index Improver (Liquid Base) (Viscosity @1000c-1400-2200 Cst) Additive Components Additive Components
HMS1&2 - 80:20, HMS - Rolling Grade, Used Rails - R65 & R50
Model: SZ-5BW; Efficient working system that provides high energy savings compared to conventional oxygen concentrators
About Shea Butter/Shea Nuts From Neogric - - - Origin: Nigeria Product Type: Shea Butter Physical Specification: Based On Buyer's Specification Quantity: Based On Buyer's Specification Trade Process: FOB/CIF Shea Nuts Specification Free Fatty Acids (FFA) : less than or equal to 6% Moisture: less than or equal to 10% Oil Content: greater than or equal to 45% Latex: 4-10% Impurity: 0-2% Shea Butter Specification Type: Grade A 100% Natural, Organic, & Unrefined Colour: Beige/White/Yellow Melting behaviour: 31-45 oC Saponification Value: 165-190mg KOH/g Unsaponification Matter: 3-13% Iodine Value: 53-72g I/00g Free fatty acid: 9% max Payment Method: TT or L/C Shipping Time: 15 to 25 days after confirmation of TT or L/C Loading Port: Lagos, Nigeria or Tema, Ghana Neogric is a trusted export company with deep expertise in the Shea Butter, Cashew Nuts and Dried Split Ginger industries. We supply and export Shea Butter, Cashew Nuts and Dried Split Ginger to international buyers in many countries around the world. We carry out our Shea Butter export business in a totally transparent manner, and our world-class team is positioned to help you close fast, safe, and profitable transactions every single time! Expected Shipping Documents Bill of Lading Certificate of Origin Inspection Certificate Phytosanitary Certificate Fumigation Certificate Commercial Invoice Packing List
Based in Mumbai, Maharashtra we are the leading exporter, supplier and manufacturer of Universal Stainers. Our strainers are robust and concentrated that can be used to create a range of shades. You can avail our universal stainer in 50 ml, 100 ml and 200 ml bottles. These have found excessive use in onsite tinting of paints. The strainers offered by us are available in 11 primary colors which can be intermixed. When you mix it with the white enamels base or the plastic emulsion paints it will produce a variety of shades. We offer the stained in two different groups and colors such as Fast red, Fast Bright Red, Red Oxide, Fast Blue, Fast Yellow, Yellow Oxide, Fast Yellow Green, Burnt Sienna, Turkey Umber, Fast Violet, Fast White, and Fast Black. Versatility : Because of the universal characteristics of the product, the stainers can be used to color all quality synthetic enamels based on long, medium and short oil alkyds, modified alkyds, etc. as well as water based compositions such as oil bound distempers, plastic emulsion paints, cement paints, etc. They can be used to color glass as well as plastics like PVC. At the same reduction (i.e. addition of same percentage of Universal Strainer) in the appropriate white base of enamels or plastic emulsion paint, it can give the SAME color in either glossy or matt finish. Universal Stainers can also be used with industrial air drying and stoving enamels, oil and water based cement primers and heavy duty coatings based on synthetic rubber, epoxies, vinyl and acrylates, etc. Quality : The color are durable and weather-fast with very high tinting strength. The quality of Universal Stainers is Consistent from batch to batch and is within + 2 %. All the raw materials and finished products undergo stringent QC and QA procedures before, during and after the manufacturing process. All the stainers are free from defects such as flocculation, flooding, cratering, etc. Directions for Use To get the desired shade, add a small quantity of stainer at a time to white base. The stainers should be added before thinning the base/white paint. Stir vigorously to mix the stainer completely in the paint. Because of its excellent tinting strength, it is advisable not to use more than 5% of Perolite Universal stainer to a given volume of paint.
Thermoplastic vulcanizates(TPV's) are a very special class of TPE prepared by dynamic vulcanization or cross-linking process of PP and EPDM rubber, It builds favourable properties which make it high performance polymer, compressible and heat resistance. TPV seen strong growth in automobile seals, pipe seals, wire & cable jacketing compound and other application where a high heat resistance required. Thermoplastic vulcanizates with excellent properties of heat resistant and breaking strength Properties High temperature resistance Wide range of hardnesses Resistance to chemicals and weathering Low compression set Flex fatigue resistance Lightweight Good colourability Typical Applications Interior and Exterior Automotive parts Wire & Cable Jacketing compound Gaskets Grommet, sockets Building and construction materials Sporting goods Electrical and electronics good Specification Hardness Set(ISO 868) (Shore A-D) 40 A - 55 D Density (g/cm3) 0.93 - 1.1 Compression(Set) Excellent Tensile Set (ISO 527) 3 MPa 10 MPa Tear Set (ISO 34) 20 kg/cm3 - 120 kg/cm3 Elongation Set (ISO 527) (%) 500 1000 Working Temp. Max. (C) 140 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Good Motor Oil Resistance Excellent Acid-Base Resistance Excellent UV-Ozone Stability Excellent
RPO is being used by rubber industries and dhoop bati industries and grease industries. It is green in color, density approx..97 . 0ne drum weight is of kg.230.
Z Premium Hydraulic Oil ISO VG 46, Anti-Wear Hydraulic Oils have high viscosity index, chemically stable, good quality mineral base oils which have been further fortified with anti- oxidant, anti-corrosion, anti-wear and anti-foam additives. Recommended as fluid media for hydraulic systems operating under moderate to severe conditions. Also recommended for circulation, splash, ring oiling system, industrial gear and air compressors.
Z Premium Refigeration Compressor Oil R22, There are three main purposes of the oil. They are used for lubrication, removal of heat and for sealing. Lubrication cooling is needed in reciprocating compressor as the piston compresses the refrigerant gas. The sealing of the piston in the cylinder needs to be cooled as well.
Z Premium Refigeration Compressor Oil, Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment. R600a (Iso-Butane) is refrigerant grade Iso-Butane used as a replacement for R12 and R134a in a variety of high temperature refrigeration applications. R600a (Iso-Butane) is a hydrocarbon that is becoming increasingly popular due to its low Global Warming Potential (GWP).
Z Premium Refrigeration Compressor Oil 404, They are specially formulated Polyol Esters lubricants for severe service conditions that are beyond the capacities of conventional mineral oils, they improve the performance and efficiency of standard refrigeration systems compared to conventional oils.
Z Premium Vacuum Pump Oil VM4 is specially developed having low vapour pressure 1 x 10-6 mm Hg at 20C. This oil is having a very high thermal stability which helps in maintaining constant vacuum for the operation.
Z Premium Vacuum Pump Oil VM100 serves as a mechanical lubricant and a medium for trapping gas molecules. It's chemically stable, unreactive to most gases and materials, and has a low-vapor pressure.
Z Premium Heat Transfer Oil 400 is a liquid that takes part in heat transfer by serving as an intermediary in cooling on one side of a process, transporting and storing thermal energy, and heating on another side of a process.
Z Premium Heat Transfer Oil 500 -highly refined and stable paraffinic oil designed to be used as a heat transfer medium and quenching oil. In many industrial applications heating is provided indirectly by circulating hot oil through a heat exchanger, thus reducing hot spots and increasing the safety of the heating process.
cross-linking activator particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with a fine particle size magnesium oxide. Packing Size: 9 kgs. Available Forms: Powder Technical Data Sheet Product Name : JC EG - 81 Function : Filler and Acid scavenger in FKM and other rubber and plastics. Technical Name : Calcium Hydroxide CAS No : 1305-62-0 Appearance : White Powder Calcium Hydroxide % ; 97.0 Min Sieve Residue (325 Mesh)% : 0.5 Max Moisture Content % : 1 Max Mode of action : JC EG - 81 is a cross-linking activator, particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with fine particle-size magnesium oxide. Processing : It is advisable to add JC EG - 81 together with the fillers or straight afterward, As JC EG - 81 is very hygroscopic therefore should, not be weighed until just before the incorporation in the mix Dosage : Normally 6-7 PHR JC EG - 81 in combination with 3PHR Magnesium oxide Packing : 9X1Kg EVA/PP Packet per box Storage : Stored in cool and dry atmosphere Advantages cross-linking activator particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with a fine particle size magnesium oxide.
