SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
We are amongst the trusted and prominent manufacturer and supplier of excellent quality S-hook. These s-hooks are reckoned for its excellent strength, superior durability and high capacity to endure varying weight and pressure. Our S-hooks are extensively used in various industries such as of textile, tractors, clothing and many others. These S-hooks have smooth structure made from best grade materials. These s-hooks are available in various sizes and designs at very reasonable range of prices. Features: Supreme quality High tensile strength Corrosion resistant Very reliable
Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
Specifications Brands: Al99.85, Al99.80, Al99.70 1, Aluminum ingot manufacture. 2, high standard. 3, High quality. 4, Competitive price The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, Applications: 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, and below
Specifications Brands: Al99.85, Al99.80, Al99.70 1, Aluminum ingot manufacture. 2, high standard. 3, High quality. 4, Competitive price The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, Applications: 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, and below
pellet machine, with the advantages of low noise, easy and stable operation, high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing. Features : 1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily. 2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding. 3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain. 4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines. 5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
CNC turning capabilities, vmc machining capacities, tensile fastners, adaptors, sleeves, banjo bolts, sealing plugs, seat plugs, nipples, reducers, cap nuts, clevis pins, adaptors for breathers, step washers, washers.
Pinion Assembly for Cooler [Fertilizer Application] Finish Weight : 680 kg Pinion Material: 42CrMo4 (Heat Treated to 260-290 BHN),Module: 25, No. of teeth: 19 Shaft Material: 30CrNiMo8 (Heat Treated to 248-325 BHN), Finish machined & Ground all over. Pinion & Shaft Shrunk Fitted with Key
Stainless Steel Hook Bolt M16 Forged Hook Bolt (M42) for Heat Exchanger. Material : ASTM A 193 Gr. B 7.
Diamond Polishing Scaife (Disc) Material Forged 42CrV6 & Heat Treated (Shaft) EN8 Diamond Polishing Scaife
Russian Coupler Material : EN-24, Heat Treated. 350 Tons tenasile load Finish Weight. 320 kg.
Fork Link Chain (142 mm pitch, Heavy Duty) Machined Yoke Yoke with Flights Welded
Rope Pulley
Sleeve Material : SAE 106
Material : 42CrMo4 Heat Treated to "T" Condition Shaft screwed into forged plate
Girth Gear Splice Studs Material : A193 Gr. B7 Nut & Lock Nuts (A 194 Gr. 2H)
Duplex Sprockets (Steel Casting) Finished Wt. 270 Kg. 67T, 1.75” Pitch, Teeth Induction Hardened
High Tensile Wheel Bolt Material : 42CrMo4 Heat Treated to 39 - 44 HRc Property Class 12.9 (ISO : 898) High Tensile Nut Property Class : 12