Characterwhite or pale yellow crystals, soluble in acetone, benzene, toluene, ether and ethyl acetate, and warm carbon tetrachloride, ethanol and heptane. It is slightly soluble in gasoline and insoluble in kerosene and water. Applicationthis product can be used in natural rubber and synthetic rubber. It can effectively prevent the burning of rubber compound in the process of processing, thus making it possible for calender and extruder to operate at high temperature and high speed, improving the production capacity of vulcanizer, improving the storage stability of rubber compound, preventing natural vulcanization during storage, and for rubber which has already undergone high heat or has the risk of scorching.The material has regeneration effect.
PU binder for synthetic running track and EPDM field base layer installation . PU binder for safety playground and wetpour . PU binder for rubber mat production . PU binder is an un pigmented and solvent free single component Polyurethane Binder of medium viscosity. It is based on MDI with 100% solid content and high standard quality control of polyether raw material and additives material for binder's intensity, life time, smell ,color and UV resistance characteristics. The defined viscosity of PU binder effects an excellent mixing with rubber granules while where is hardly any run off from the granules. Another characteristic is the suitable curing time and therefore application time allowing day construction joints to be easily and correctly done . The yellowing that occurs when PU binder is exposed to UV-light does not affect its mechanical properties.PU binder is moisture curing .
Application: This product is a general amine antioxidant with excellent heat, oxygen and aging properties in rubber industry. It is especially suitable for all-steel and semi-steel radial tires, and is widely used in tires, hoses, belts, rubber shoes, rubber products and other general industrial rubber products, as well as latex products.
Qualification description: Glue T-78E is a dispersing additive with double dispersing effect on carbon black and inorganic filler. It not only has internal and external lubrication, but also has chemical bonding of functional polymers. It is an economical high-efficiency dispersion. Additives to improve the dispersibility of the powder in the compound, especially the dispersion of carbon black. Glue T-78E can effectively shorten the mixing time, increase the rolling and pressing speed, reduce the extrusion temperature, improve the utilization factor of equipment, reduce energy consumption and cost.
atters needing attentionThis product is a polluting antioxidant. It is not suitable for white or bright-colored products because of its pollution to light-colored products by migration or contact. Packaging and storage:packaging can be done according to customer requirements. BLE200Kg/bucket BLE-Cã??BLE-Wã??BLE-75:Paper plastic composite bag, net weight 25kg. Store in a cool, ventilated and dry place. For more information about other types of rubber antioxidant,please send message to Email.
DPG (D) GRANULE AND POWDER CHINA , Technical Name: Diphenyl guanidine Appearance: White or grayish white powder or granule, Melting point:144.0 Generally used for natural and synthetic rubbers. Mainly used in manufacture of tires, slab rubber, rubber shoes and other technical rubber products.
CPE/CR Rubber Vulcanizer H631 Colour: Light yellow powder Cross-linking Agent ACTORH-631 H631 can be used as a thiadiazole vulcanization system for vulcanization crosslinking of chlorinated polyethylene rubber (CPE/CM) and chloroprene rubber (CR). As a CM/CR high-efficiency vulcanizing agent, it can produce heat-resistant, ozone-ageing, flame-retardant and excellent physical properties. It is widely used in rubber products such as cables, hoses, tapes and so on. H631 is obtained by complex condensation coupling reaction of thiadiazole derivatives and other macromolecule amides. Its appearance is a pale yellow powder. The product can be used in various vulcanization processes of CPE/CR, such as moulding, continuous vulcanization, pot-type, microwave-type, etc. H631 can effectively vulcanize chlorinated polyethylene rubber (CM), chloroprene rubber (CR) and obtain excellent vulcanizates. Characteristic 1. H631 is suitable for low pressure die-less vulcanization (conventional peroxide system requires higher vulcanization temperature and pressure), with good processing safety and longer scorching time. 2. H631 can replace high-priced plasticizers such as DOP with cheap plasticizers such as aromatic oils. 3. H631 is an effective co-vulcanizing crosslinking agent for rubber such as CPE/EPDM CPE/NR CPE/CR.
Chemical Name: Zinc 2-mercaptobenzothiazole Specification: Item MZ-5 MZ-15 Powder Oiled powder Powder Oiled powder Appearance Light yellow powder Light yellow powder Initial M.P. �¿C â?¥ 200.0 200.0 200.0 200.0 Loss on drying % â?¤ 0.30 0.50 0.30 0.50 Zinc content % 16.0-22.0 16.0-22.0 15.0-18.0 15.0-18.0 Free M % â?¤ 5.0 5.0 15.0 15.0 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 0.10 0.10 Additive, % -- 1.0-2.0 -- 1.0-2.0 Properties: Light yellow powder with light bitter taste. Specific density is 1.65--1.72. Hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali. Application: Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as an intermediate between Accelerator MBT and Accelerator MBTS. Used as a secondary accelerator in combination with Accelerator ZDMC and Accelerator ZDEC. Have the similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better has processing safety. Suitable for mold curing. Requires zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Chemical Name: Dibenzothiazole disulfide Specification: Item Powder Oiled powder Granule Appearance Gray-white or light yellow powder(granule) Initial M.P. �¿C â?¥ 167.0 167.0 167.0 Loss on drying % â?¤ 0.30 0.50 0.30 Ash % â?¤ 0.30 0.30 0.30 Residues on 150�¼m sieve, % â?¤ 0.10 0.50 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.50 Properties: A little bitter taste. Specific gravity: 1.45--1.54. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than Accelerator MBT. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Chemical Name: N-Oxydienthylene-2-benzothiazole sulfenamide Specification: Item Granule Appearance Light yellow or orange granule Initial M.P. �¿C â?¥ 80.0 Loss on drying % â?¤ 0.30 Ash % â?¤ 0.30 Insoluble In methanol,%max 0.50 Free amine,%max 0.50 Properties: Light yellow or orange crystal(granule). No posion with a little odor of ammoni. The density is 1.34--1.40. Soluble in benzene, acetone, chloroform, insoluble in water acid and alkali with lower concentration. Application: An excellent delayed accelerator. The performance is similar as Accelerator CZ with better scorch safety. Widely used in NR, IR, SBR, NBR and EPDM. Can be used alone or with those vulcanization Accelerators such as thiurams, guanidines and dithiocarbamates to improve the activity. Mainly used in manufacture of tires, shoes and belts. Non-blooming. Not Suitahle appying in beverage and food containers because of the bitterness of the product after vulcanization. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is one year when stored under normal conditions.
Chemical Name: N-tert-butyl-2-benzothiazyl sulfenamide Specification: Item Powder Oiled powder Granule Appearance Gray-white powder(granule) Initial M.P. 105.0 105.0 105.0 Loss on drying % 0.30 0.50 0.30 Ash % 0.30 0.30 0.30 Residues on 150 m sieve, % 0.10 0.10 -- Insoluble In methanol,% 1.0 1.0 1.0 Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.0-3.0 Properties: Grey white powder(granule in color with bitter taste and slight odor. Specific gravity: 1.26--1.32, Soluble in ethanol, carbon tetrachloride, acetone, benzene, carbon disulfate, chloroform; Hardly soluble in gasoline and insoluble in water. It is not hygroscopic. Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra Accelerators in tire compounds or industrial rubber products. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 1 year when stored under normal conditions.
Rubber Adhesive GLR-806 / Rubber Adhesive CYREZ 964 / Rubber Adhesive HMMM / Rubber Adhesive RA-65 / Rubber Adhesive HMMM-65% Overview: 1. Chemical name: Hexamethoxymethylmelamine (HMMM) 65% + inert carrier (white carbon black) 35%. 2. Chemical family: Methylated melamine-formaldehyde resin, melamine resin 3. CAS No.: 9011-5-6 Technical Specifications: Appearance: White powder Ash content (850deg): 29~35 Water content % max.: 4.5 Sieve residue (325 mesh) % max.: 0.3 Free formaldehyde content % max.: 0.1 Application: 1. It can promote adhesive force for rubber and steel cord or fabric cord. 2. Suggested ratio: 2-5 poses Rubber adhesive RA-65 with 2-5 poses resorcinol formaldehyde resin. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Shelf life is one year.
Rubber Antioxidant IPPD (4010NA) Another Name: 4010NA Molecular Formula: C15H18N2 CAS: 101-72-4 Technical Specifications: Appearance: Grey purple to puce granules or flakes Melting point min.: 71.0 deg. Heating Loss % max.: 0.5 Ash Content % max.: 0.3 Purity % min.: 96 Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse, Shelf life is one year.
Rubber Antioxidant TMQ / Rubber Antioxidant RD Chemical Name: Polymerized 2, 2, 4-trimethyl-1, 2-dihydroquinoline Another Name: RD CAS NO.: 26780-96-1 Technical Specifications: Appearance: Brown granules Softening point, deg.: 80-100 Heating Loss % max.: 0.30 Ash Content % max.: 0.30 Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse, Shelf life is one year.
Rubber Antioxidant 6PPD (4020) Chemical Name: N-(1, 3-DIMETHYLBUTYL)-N- PHENYL-P-PHENYLENEDIAMINE Another Name: 4020 Molecular Formula: C18H24N2 CAS NO.: 793-24-8 Technical Specifications: Appearance: Purple brown to dark brown granules or flakes Melting point min.: 46.0 deg. Heating Loss % max.: 0.3 Ash Content % max.: 0.1 Purity % min.: 96 Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse, Shelf life is one year.
Rubber Antioxidant DTPD / Rubber Antioxidant 3100 / Wingstay 100 Overview: Chemical Name: N, N-Bis (methyl phenyl)-1, 4-benzenediamine. Another Name: 3100, Nailax CAS No.: 68953-84-4 Technical Specifications: Appearance: Brownish grey granules Initial melting point (dry) deg: 90-100 Heating loss (65deg, 3h) %max.: 0.50 Ash content (800�±25deg) %max.: 0.30 Active compenents content %min.: 80.0 Diphenylamine %max.: 6.0 Fineness through 3/8 %min.: 100.0 Iron content ppm/max.:750.0 DPPD content %: 16.0-24.0 DTPD content %: 15.0-23.0 PTPD content %: 40.0-48.0 Application: 1. It can be used for manufacturing tires. 2. It is suitable for load tires, cross-country tires and various tires and bias-ply tires. Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse; dampness and heating are strictly prohibited. 3. Shelf life is one year.
Rubber Processing Oil Rubber Process Oils are used during mixing of rubber compounds. These help in improving the dispersion of fillers and flow characteristics of the compound during further processing. Rubber processing oils are specially developed taking into consideration the type of rubber and the end product applications.
Material Properties Styrene butadiene Rubber latex is a kind of high-polymer dispersion emulsion polymerized by butadiene, and styrene, etc. through advanced techniques. As a white thick emulsion in appearance, it has good viscosity. It is one of the popular raw materials in tyre-dipping fabric industry, because of its good intermiscibility with VP latex for fabric dipping. Typical properties Product Styrene butadiene Rubber latex (SBR latex) Execution Standards: Q/320205 GLFF01-2010 Item Standard Solid Content, % 50.0±1 Viscosity, mP25-35 pH Value(25ºC) 10-11 Density,g/cm3(20ºC) 0.98-0.99 Mechanical Stability, %5 Chemical Stability, %0.33 Application It is suitable for the dipping of tyre cord fabric, and industrial fabric etc.. Storage&Package 1.Avoid from rain, snow or strong sunlight. Temperature: 1~40°C. 2.200L Drum, 1000L IBC. 3.Keep in dry, cool, non-aggressive gas warehouse, and avoid strong sunlight, remote from fire and thermal resource at 1~40°C, 6 months shelf life, a little decrease of PH value.
Panama Petrochem Ltd, manufactures Rubber Process Oils which are widely used across various industries and are popular as safe and environment friendly products. Different grades of superior quality Rubber Process Oils are offered which are used for the manufacturing of various rubber produces, from both natural as well as synthetic rubber. Under the brand name Panol, 3 Grades are offered namely, PANOL C 160-A – (Aromatic Base) PANOL C 160-P – (Paraffinic Base) PANOL C 160-N – (Naphthenic Base) Also, Speciality Rubber Process Oils meeting European Regulation for non-carcinogenic oils, Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE), are offered on request. PANOL C 160-A Panol C 160-A is an Aromatic type of Rubber Processing Oil, formulated from specially selected aromatic furfural extracts with higher aromatic content. It is available with different viscosities as required for different applications. High rubber and polymer solvency Widely used in the manufacturing of automotive tyres and tubes, bi-cycle tyres, tyres retreading materials, belting, hoses, battery containers, extruded products and technical moulded goods Highly suitable for Natural Rubber, Styrene Butadiene Rubber, Polybutadiene Rubber and Neoprene Rubbers Offers good compatibly and is suitable for use with Natural Rubber, SBR, PBR, CR etc. PANOL C 160-P Panol C 160-P are Paraffinic type Rubber Processing / Extender Oils formulated from highly refined solvent extracted base stocks of low sulphur content. These oils are used in the manufacturing of butyl tubes and a variety of technical moulded and extruded products based on polar rubbers like EPM & EPDM etc. They have good thermal stability and are suitable in the manufacture of light coloured products and because of their high paraffinic content and viscosity, these oils are preferred for achieving high retention of properties after ageing and higher loading of oil They are used for heat resistant conveyor belts and steam hoses PANOL C 160-N Panol C 160-N serws grades are Napthenic type Rubber Processing / Extender Oils formulated from carefully selected Hydrotreated Napthenic base stocks. These are non-staining in nature and posses excellent thermal, oxidation and colour stability They are recommended in the manufacture of automotive tubes, light coloured non-back footwear products and also moulded and extruded goods They are compatible for processing with NR, SBR, PBR, Butyl and EPDM rubbers Special tailor-made blends are also available for TPR and other specific applications SPECIALITY RUBBER PROCESS OILS We manufacture and offer Speciality Rubber Process Oils meeting European Regulation for non carcinogenic oils. We have a wide range of Mild Extracted Solvent (MES), Residual Aromatic Extracted Solvent (RAE) and Treated Distillate Aromatic Extracted Solvent (TDAE).
Molecular Formula: C5H8 The goods is an important monomer of synthetic rubber, its dosage accounted for 95% of the total output of isoprene, mainly used for the synthesis of isoamyl rubber, its production after styrene-butadiene rubber and butadiene rubber and synthetic rubber in the third.Secondly, used as a monomer synthesis of butyl rubber, to improve the butyl rubber vulcanization performance, but very few dosage, isoprene is also used in synthetic resin, liquid polyisoprene rubber, etc.Also used in the manufacture of pesticide, medicine, spices, adhesives, etc.
