Diacetyl Tartaric Acid Esters of Mono  and Diglycerides Characters: Ivory or straw yellow powder or granular solid which is easily soluble in hot water. It is a non-ionic emulsifier with HLB value of 8-10. Applications: It can produce strong effects such as emulsification, dispersing and aging resistance, so it can be used as good emulsifier and dispersant. (1) It can increase the springiness, toughness and gas-holding capability of dough effectively, reduce its softening degree, increase volume of bread and steam bread, and improve their organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can be used in cream to make it smoother and finer. (4) It can be used in butter and concentrated butter to prevent oil separating and enhance its stability. (5) It can also be sued in sugar, syrup and spices. (6) It can be used in non-dairy creamer to make the emulsion homogeneous , stable and supple in mouth. Usage: (1) Put this product in warm water at about 60�?? to get paste shaped substance, and then use it in appropriate proportion. (2) Dissolve this product in oils or fats homogeneously before further processing. (3) Directly mix it with flour for use. Recommended Addition Amount: Addition maximum is 1.0% for raw dried flour products and raw wet products, while 5.0% for non-dairy creamers. The addition amount can be changed based on production need for cream and fermented milk. Technical Index (Conform to GB25539-2010 standard Acid value (Calculated by KOH) / (mg/g) 65-85 Saponification value (Calculated by KOH) / (mg/g) 390-450 Total tartaric acid(W/%) 10-40 Total glycerol(W/%) 11-28 Total acetic (W/%) 8-32 Free glycerol(W/%) �?�2.0 Ignition residue (W/%) �?�0.5 Pb/(mg/kg) �?�2 Packaging�? Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5 KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
Multi-needle ultrasonic drilling and drilling machine No. 711701002 Product model XX-1800 Ultrasonic drilling machine is a new type of drilling equipment developed in the last few years. It converts the 15KHz signal generated by the ultrasonic generator into high-frequency mechanical vibration by the transducer, and transmits it to the working head (steel needle) welded at the end of the tool head after being amplified by the tool head (commonly referred to as the needle head), driving the abrasive suspension between the working head and the workpiece (steel sand and water constantly escaping from the ring) to impact at high speed, Comprehensive effects such as friction and cavitation of abrasive suspension result in the workpiece quickly emerging to form or penetrating into holes according to the shape and line of the mold, thus realizing the whole process of ultrasonic carving and drilling. Auxiliary system includes body abrasive and coolant supply system Compared with traditional products, there are great improvements and improvements in the application of advanced ultrasonic technology, production process, energy saving and efficiency, stability and reliability. In addition to selling well in China, our products are also exported to many countries and regions such as the Middle East, Myanmar, India, South Africa, Pakistan, etc. After many years of product sales and improvement, the overall quality and stability of the product are leading in the same industry, and become the object of imitation. With perfect after-sales service, the product has won a good reputation among users. The equipment can be used for processing and production. characteristic: AC220V power supply is adopted, which works stably Fuzzy frequency modulation is adopted, and the whole machine automatically adjusts the frequency according to the actual processing power, which is easy to operate without manual adjustment Overload, overcurrent, overvoltage and automatic protection High power, high efficiency and energy saving, no radiation and no pollution High positioning accuracy Suitable for processing: jade, crystal, agate, glass, hard alloy and various semi-precious stones and metals with high hardness Common tools: tin bar, zinc powder, hydrochloric acid, tool head, needle burning table, needle burning mold, upper mold, lower mold, hollow needle wrench, water pump, perforated sand Technical parameters: Input voltage: AC220V Output power: 1800W Overall dimension: 540mm 500mm 1500mm Porcelain chip diameter: 60mm Hole diameter: 0.8-1.8mm Purpose: drilling diamond beads Weight: 50kg
Chamber Type : Single Sealing Length : 610 mm Automation Grade : Semi-Automatic Phase : Three Phase Usage/Application : Dates, Peanuts, Dry Fruits, Namkeen, Khakhra, Spices, Instant Food, Bakery Product, Dairy Products Capacity : 1 to 10 Kg (Depend On Product) Model Name/Number : Brick Shape Vacuum Packing Machine I Deal In : New Only Pump Capacity : 300 LPM to 600 LPM We are passionately engaged in providing optimum quality gamut and We are counted among the leading firms for providing a wide range of Brick Shape Vacuum Packaging Machine. We are passionately engaged in providing optimum quality gamut of Single Chamber Vacuum Packaging Machine. VERTICAL CHAMBER VACUUM MACHINE Compact & Industrial version of Brick Shape Vacuum Packing Machine, S.S. vacuum chamber & M.S. / S.S. dia cast. S.S. Outer body, Digital Timer system, Single Sealing bar. Available in Multiple different Models. Features: Packaging Size : 1 Kg to 15 Kg ( Depend on Product) Useful For Molded Vacuum Packaging For Cube Shaped Packs. The Product After Packing By Single Vacuum Packing Machines Can Be Prevented From Oxidation, Going Mould, Insects Or Getting Damp, Thus Can Be Kept Fresh For Longer Time. Single Chamber Vacuum Packing Machines Can Finish The Whole Programs Of Vacuum Extraction, Gas Flushing (Optional), Sealing, Cooling And Exhaust Automatically. To Observe Packaging All Process From The Top Of The 2 Transparent Acrylic Glass. Noise Free Operations. Easy To Adjust The Tray. BENEFITS OF VACUUM PACKING Keeps Food Fresher & hygienic. No Loss of Weight, Retention of Aroma. Protect from Dust, Moisture, Humidity etc. Provide The Concrete Protection to the Product. Increase the Self Life of Product & Save the Space. Increase the reliability and Get More value of Product. USEFUL FOR: Dates, Peanuts, Dry Fruits, Dairy Products, Sea Food, Namkeen, Khakhra, Spices, Instant Food, Bakery Product, Chemicals, Electronics Components, Pharmaceutical etc. Applications: This Machine is Usefull for Powder / Solid / Semi Liquid / Granuals Bricks Shape Packing. Vacuum Is Also Available With Nitrogen Flushing.
Chamber Type : Single Sealing Length : 663 mm Automation Grade : Semi-Automatic Packaging Type : Vacuum Packaging Machine Size : 732 mm x 318 mm x 982 mm Power : 440 V AC (3HP) Phase : 3 Phase Usage/Application : Dates, Peanuts, Dry Fruits, Dairy Products, Sea Food, Namkeen, Khakhra, Spices, Instant Food, Bakery I Deal In : New Only Vacuum Chamber Dimensions : 730 mm X 327 mm X 756 mm Sealing Width : 8 mm Vacuum Pump : 300 LPM, 600 LPM, 1100 LPM Air Charging Volume For Vacuum Pump : 17 M3/hr, 35 M3/hr, 65 M3/hr Body Build Material : All Stainless Steel Food Grade Packing Cycle : 1 To 2 Cycle/Min (Depend On Product) Sealing Type : Pneumatic Electrical Material : Digital Electronic Control Chamber Material : Aluminium Dia Cast We are counted among the leading firms for providing a wide range of Vertical Vacuum Packaging Machine. Features: Packaging Size : 5 Kg to 25 Kg ( Depend on Product) To Observe Packaging All Process From The Top Of The Transparent Acrylic Glass. Oil Mist Separator To Remove The Oil Mist From Vacuum Pump Exhaust. Manual Vacuum Stop Button For Liquids & Semiliquids. Easy To Move Machine. Lock The Side Conveyor. Base Conveyor With Nylon Rollers For Easy Movement Of The Product. Adjustable Height Of The Base Conveyor For Products Having Different Heights. Can Be Conveyorised For Heigher Output. Useful For Molded Vacuum Packaging For Cube Shaped Packs. Noise Free Operations. BENEFITS OF VACUUM PACKING Keeps Food Fresher & hygienic. No Loss of Weight, Retention of Aroma. Protect from Dust, Moisture, Humidity etc. Provide The Concrete Protection to the Product. Increase the Self Life of Product & Save the Space. Increase the reliability and Get More value of Product. USEFUL FOR: Dates, Peanuts, Dry Fruits, Dairy Products, Sea Food, Namkeen, Khakhra, Spices, Instant Food, Bakery Product, Chemicals, Electronics Components, Pharmaceutical etc. Optional Features: Inert Gas Flushing Unit, Vacuum Is Also Available With Nitrogen Flushing. This Machine is Usefull for Powder / Solid / Semi Liquid / Granuals Bricks Shape Packing. The chamber size, sealing length are custom built. Gas Pressure Monitoring Device For Nitrogen & Carbon Dioxide. Vacuum & Gas Sensor Control For Accurate Level Of Vacuum & Gas. All Stainless Steel Mold & Formers To Get The Perfect Cube Shape For Molded Vacuum Packaging. Vibrating Table For Compaction Of The Material To Be Packed. In Feed & Discharge Roller Conveyor For Easy Movement
Packaging Food Material : Pulses Packaging Chamber Type : Double Automation Grade : Semi Automatic Machine Alignment : Horizontal Usage/Application : Dates, Peanuts, Dry Fruits, Dairy Products, Sea Food, Namkeen, Khakhra, Spices, Instant Food, Bakery Brand : Paqee Packaging Phase : 3 Phase I Deal In : New Only Sealing Length : 687 mm Sealing Position Of Vacuum Chamber : Four, Two (Per Chamber) Vacuum Chamber Dimensions : 748 mm X 565 mm X 112 mm Sealing Width : 8 mm Air Charging Volume For Vacuum Pump : 17 M3/h, 20 M3/h, 35 M3/h Body Build Material : All Stainless Steel Food Chamber Material : Aluminium Dia Cast Machine Dimensions : 1602 mm X 613 mm X 637 mm Packing Cycle : 1 To 6 Cycle/Min (Depend On Product) Distance : 440 mm (Between Two Separate Sealing Bar) Electrical Material : Digital Electronic Control Power : 220/440 V AC (890 W) Pump Capacity : 300 LPM to 600 LPM Our competency lies in providing an excellent quality assortment of Double Chamber Vacuum Packaging Machine. DOUBLE CHAMBER VACUUM MACHINE The Double chamber vacuum packing machine has two chambers to vacuum the product, Which prevent consumption of time, labor & energy, increases production capacity. S.S. vacuum chamber & Alluminium dia cast with 2 Glass window lid. S.S. Outer body, Digital Timer system, Double Sealing bar. Features: Packaging Size : 100 Gm to 2 Kg ( Depend on Product) To Product After Packing Can Be Prevented From Oxidation, Going Mould, Insects Or Getting Damp, Thus Can Be Kept Fresh For A Longel Time. Double Chamber Vacuum Packaging Can Finish The Whole Programs Of Vacuum Extraction, Gas Flushing (Optional),Sealing, Cooling & Exhaust Automatically. To Observe Packaging All Process From The Top Of The Transparent Acrylic Glass. Noise Free Operations. Easy To Adjust The Tray. BENEFITS OF VACUUM PACKING Keeps Food Fresher & hygienic. No Loss of Weight, Retention of Aroma. Protect from Dust, Moisture, Humidity etc. Provide The Concrete Protection to the Product. Increase the Self Life of Product & Save the Space. Increase the reliability and Get More value of Product. USEFUL FOR: Dates, Peanuts, Dry Fruits, Dairy Products, Sea Food, Namkeen, Khakhra, Spices, Instant Food, Bakery Product, Chemicals, Electronics Components, Pharmaceutical etc. Applications: This Machine is Usefull for Powder / Solid / Semi Liquid / Granuals Bricks Shape Packing. Vacuum Is Also Available With Nitrogen Flushing.
Chamber Type : Single Sealing Length : 535 mm Automation Grade : Automatic Phase : Three Phase Model Name/Number : Single Chamber Vacuum Packaging Machine For Food Power : 220/440 V AC (890 W) Packaging Type : Vacuum Packing Machine Size : 900 mm X 638 mm X 646 mm Pump Capacity : 300 LPM to 600 LPM No Of Sealing Bar For Each Chamber : Two Usage/Application : Dates, Peanuts, Dry Fruits, Dairy Products, Sea Food, Namkeen, Khakhra, Spices, Instant Food, Bakery I Deal In : New Only Air Charging Volume For Vacuum Pump : 17 M3/h , 35 M3/h Body Build Material : All Stainless Steel Food Grade Chamber Material : Aluminium Dia Cast Packing Cycle : 2 To 3 Cycle/Min (Depend On Product) Distance : 435 Mm (Between Two Sealing Bar) Electrical Material : Digital Electronic Control Sealing Width : 8 mm We are passionately engaged in providing optimum quality gamut of Single Chamber Vacuum Packaging Machine. SINGLE CHAMBER VACUUM MACHINE Compact & Industrial version of Single Chamber Vacuum Packing Machine, S.S. vacuum chamber & Aluminium dia cast with 2 Glass window lid. S.S. Outer body, Digital Timer system, Double Sealing bar. Available in Multiple different Models. Features: Packaging Size : 100 Gm to 2 Kg ( Depend on Product) The Product After Packing By Single Vacuum Packing Machines Can Be Prevented From Oxidation, Going Mould, Insects Or Getting Damp, Thus Can Be Kept Fresh For Longer Time. Single Chamber Vacuum Packing Machines Can Finish The Whole Programs Of Vacuum Extraction, Gas Flushing (Optional), Sealing, Cooling And Exhaust Automatically. To Observe Packaging All Process From The Top Of The 2 Transparent Acrylic Glass. Noise Free Operations. Easy To Adjust The Tray. BENEFITS OF VACUUM PACKING Keeps Food Fresher & hygienic. No Loss of Weight, Retention of Aroma. Protect from Dust, Moisture, Humidity etc. Provide The Concrete Protection to the Product. Increase the Self Life of Product & Save the Space. Increase the reliability and Get More value of Product. USEFUL FOR: Dates, Peanuts, Dry Fruits, Dairy Products, Sea Food, Namkeen, Khakhra, Spices, Instant Food, Bakery Product, Chemicals, Electronics Components, Pharmaceutical etc. Applications: This Machine is Usefull for Powder Solid Semi Liquid Granuals Bricks Shape Packing. Vacuum Is Also Available With Nitrogen Flushing.
ECTFE Coating Grade Resin 1.Product introduction As a resin, ethylene chlorotrifluoroethylene is a very pure fluorine copolymer, which not only has excellent mechanical properties, good weather resistance and chemical resistance common to fluorine-containing resins, but also has excellent light transmittance and hardly absorbs visible light and ultraviolet light. In addition, because it contains chlorine atoms, the moisture permeability of all fluorine resins is relatively low, which can prevent many liquids and gases from penetrating, and is beneficial to the anticorrosion and rust prevention of the protected substrate. 2.Technical Parameter Item Test Method Unit Value Density ASTM D792 g/cm3 1.66~1.68 Grain Size ASTM D1921 um 40~80 Melting Point ASTM D3418 �ºC 215~225 Melt Index ASTM D1238 g/10min (275�ºC,2.16kg) 8~15 3.Mark, Packing, Storage & Transportation 3.1 Mark The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc. 3.2 Package This product is packed in paper barrels (lined with polyethylene plastic bags) with a net content of (20 �± 0.2) kg per barrel. Each barrel shall be provided with a product certificate, including: company name, product name, batch number, brand (specification number), net content and production date, etc. In case of special packaging, the supplier and the Demander shall negotiate separately. 3.3 Storage This product should be stored in a clean, cool and dry place to prevent rain, sunshine, moisture, dust and other impurities. 3.4 Transportation This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation. 4.Main Application 4.1 ECTFE coating grade resin is white powder, which has excellent chemical corrosion resistance, excellent barrier performance to various corrosive gases and excellent high and low temperature resistance. 4.2 The electrostatic spraying method can be used for coating protection of reactors, pipelines, storage and irrigation, mixers and other containers in the chemical and semiconductor fields, thus delaying the service life of the equipment.
1.Product� Introduction PFA has excellent characteristics and good processability, and is widely used in lining equipment, pipeline valves, chemicals, wire and cable and medical supplies. 2.Technical Parameter Items Test Method FJY-A03S FJY-A06S FJY-A15S FJY-A30S Apprearance / Semi-transparent particies or white powder, no obvious impurities MFR ASTM D1238 0.8~3.0 3.1~6.0 6.1~15.0 16~40.0 Standard Specific Gravity ASTM D792 2.12~2.17 Melting Peak Temperature ASTM D3418 300~316 Tensile Strength (Mpa) , ASTM D638 30 28 26 22 Elongation at Break (%) , ASTM D638 300 300 300 300 Water Content, (%) , HG/T 2902 0.2 3.Main Application Application Representative Products Model Specification Lining Container and Pipeline Lining Pump Valve Gasket welding material FJY-A03S, FJY-A06S Pipe Hose, heat shrinkable rube, heat exchanger tube, level gauge tube FJY-A03S, FJY-A06S Wire and Cable Insulation sheath for communication cables, electronic cables and other cables FJY-A15S, FJY-A30S Electronic and Electrical Components Connectors, sockets, joints, chemical solvent bottles FJY-A03S,FJY-A06S,FJY-A30S Thin Film and Sheet Sheet Lining, Electrical Insulation Tape, Deposition Film FJY-A03S,FJY-A06S 4.Attention PFA is stable and non-volatile at normal ambient temperature, but it will decompose and release certain toxic gases when it is subjection to high temperature during forming process. Therefore, in the process of moulding, extrusion and injection moulding, it is need to ensure good ventilation. In the process of processing, the decomposition gas of PFA may corrosion to the equipment, so it is necessary to avoid the long residence time of PFA in the equipment at high temperature. 5.Mark,Packing, Storage & Transportation 5.1 Mark There shall be firm and clear marks on the drums of this product, indicating company name, product name, batch number, brand number (specification number), net content, etc. 5.2 Package The product is packaged in polyethylene plastic bags and then packaged in cardboard boxes with a net weight of 25 kg per box. 5.3 Storage It should stock in clean,cool,and dry warehouse,prevent from agglomeration and contamination. 5.4 Transportation This product is non-toxic,non-explosive, non-corrosive, according to non-dangerous goods transport.
Product Description PVC profile production line is composed of cone twin screw extruder, vacuum calibration tank, haul-off, cutter, stacker, and also coordinated with different profile break-section and mould to produce PVC door&window profile,indoor floor, decoration plate material, profile and multi-hole wire plastic products etc. This extrusion line also can be used to produce wpc profile extrusion line WPC Machine can be used after recycling, and has been widely used in fields of floor, guard bar, tray, packing cases, partition board, window and door sheath, skirting line, etc. Configuration Mixer �· Mixing PVC powder, CACO3 and other addictives. �· Widely used in PVC pipe and profile production. �· Composed of high speed mixer (hot mixer), cooling mixer and control cabinet. �· Stainless steel SUS304 for the internal wall construction. It will guarantee the mixer could use for long time under the high friction. �· The mixing blades are passed the static and dynamic balance testing. And the main shaft adopts fine sealing to prevent material leakage. Extruder Different models for options: SJSZ51/105, SJSZ65/132. High quality electrical components, like Siemens, Omron, Fuji, Delta, etc. Alloy screw & barrel, which guarantee high quality and stable output. Equipped with high qualty gearbox and distributor. Extruder control by PLC screen touch is available as well; PLC screen touch is from Siemens (customized). Vacuum calibration table Include full set of vacuum and water pump Width: 240mm Length: 6000mm Independent operation panel for easy operation Haul off speed control by inverter Fast change type pads for easy operation Install plate is adopts aluminum material Cutter Lifting saw cutter with adopts double station dust collection system Synchronous drivingby air cylinder or servo motor control stacker Stainless steel304 as touching material Discharge driving by air cylinder Technical Parameter Model SJSZ-51/105 SJSZ-65/132 Total installation power(kw) 130 155 Transformer (kw) 100 100 Actual electricity consumption(kw) 50 50 Output (kg\h) 120-140 240 Line speed (m\min) 1-3 1-3 Motor power(kw) 22 37 UPVC/PVC/WPC/ Ceiling/Wall Panel Twin Extruder Production Line Packing and delivery UPVC/PVC/WPC/ Ceiling/Wall Panel Twin Extruder Production Line
Polyglycerol Esters of Fatty Acids(PGE) Chemical Structure: Characters: Straw yellow powder or granular solid which is easily soluble in oils and fats and soluble in organic solvents such as ethanol. It can be dispersed in hot water. Its an non-ionic surfactant with characteristics such as high temperature and acid resistance and HLB value is 7.2. Applications: This product is a kind of hydrophilic monoglyceride, and it can produce strong emulsification effect for oils and fats. 1. It can be used in margarine, butter, shortening oil and oyster sauce as emulsifier and crystal modifying additive to prevent oil-water separation and prolong the preservation period. 2 It can be used in food baking to make oils and fats dispersed more homogeneously in dough to get higher foamability and produce larger volume of product, fine and supple feeling in mouth. 3. It can be added into ice cream to make all components mixed more homogeneous, prevent forming of big ice crystal, help produce fin e and dense pore structure, enhance its expansion ratio and produce smooth and fine feeling in mouth. 4. It can be used in milk beverage as emulsifier, wetting agent, cosolvent and so on. It can also enhance flavor, aroma and color of them. 5. It can be used in meat products to prevent starch aging, shrinkage, water absorption and hardening. 6. It can be used in candies and chocolates to prevent oil-water separation and maintain a good taste. Usage: (1) Since this product is easily soluble in oils and fats, you can dissolve it in oils or fats homogeneously before further processing. (2) You can also dissolve this product in warm water at about 60 homogeneously, and then mix it with other raw materials for further use. Recommended Adding Amount: The addition maximum is 0.01% for bread and pastry, the maximum is 0.3% for ice cream. Technical Index (Refer to GB 1351092): Acid Value (mgKOH/g) 5.0 Saponification Value (mgKOH/g) 120-135 Iodine Value (g/100g) 3.0 Sulfated Ash Content % 1.0 Heavy Metal (Calculated by Pb)% 0.001 Arsenic(Calculated by As)% 0.0003 Melting Point () 53-58 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
Sl320 Cross Slider Coupling has a large radial displacement, transmission common torque 120-63000N m, speed 250~70r/min. SL320 Cross Slider  Coupling  Basic Performance Parameters And Main Dimensions Type Nominal Torque  TnN m Allowable Speed  [n] r/min Shaft Hole Diameter  d D D, L H S Inertia Moment  kg m2 Weight kg SL70 120 250 15 -18 70 32 42 14 0. 002 1.5 SL90 250 250 20 -30 90 45 52 14 0. 008 2.6 SL110 500 250 36 -40 100 60 70 19 0. 026 5. 5 SL130 800 250 45 -50 130 80 90 19 0.5 0. 07 10 SL150 1250 250 55 -60 150 95 112 19 0. 14 15.5 SL170 2000 250 65 -70 170 105 125 24 0. 25 22.4 SL190 3200 250 75 -80 190 110 140 29 0.5 31.5 SL210 5000 250 85 -90 210 130 160 33 0.9 45 SL240 8000 250 95 -100 240 140 180 33 1.6 59.5 SL260 9000 250 100-110 260 160 190 33 2 76 SL280 10000 100 110-120 280 170 200 33 3 94.3 SL300 13000 100 120-130 300 180 210 43 1.0 4.3 111 SL320 16000 100 130-140 320 190 220 43 5.7 129 SL340 20000 100 150 340 210 250 48 8.4 162 SL360 32500 100 160 360 240 280 48 19.2 258 SL400 38700 80 170 400 260 300 48 26. 1 305 SL460 63000 70 200 460 300 350 58 62.9 560 aluminum foundry of wisconsin , olson aluminum casting , open mold aluminum casting , ohio aluminum casting , of aluminum casting , types of aluminum casting , plaster of paris aluminum casting , shrinkage of aluminum casting , what type of sand to use for aluminum casting , powder coating on aluminum casting , aluminum casting process , aluminum casting platform , aluminum casting porosity
Fly is a by product of coal based thermal power station generated by the combustion of pulverized coal. Fly Ash is a fine, grey amorphous powder, rich in silica & alumina and spherical in shape. The properties of Fly Ash may vary widely, both physically and chemically, depending upon the nature of coal, the efficiency of coal combustion process and the selection process. Therefore, it is important that when considering the use of Fly Ash to look no further than a company with the in depth technical knowledge and support to manufacture and supply a high quality product, that company is KRISHNA ENTERPRISES(DOMESTIC AND INTERNATIONAL TRADE). "Our Technology means even Better Quality" : KRISHNA ENTERPRISES(DOMESTIC AND INTERNATIONAL TRADE) only selects Fly Ash that is highly reactive and has water reducing characteristics. Our Fly Ash is amongst the first classified and processed material being made available in India. By classifying and processing, we ensure that a large proportion of our Fly Ash is composed of fine particles, which results in a more controlled and consistent product. Our Fly Ash complies with the stringent International codes of practice such as : BS EN 450 S, ASTM C 618 Class F and IS 3812 Grade 1 Our customers can therefore be assured of the highest standards of quality, process control and product consistency. Features : Fine Particle size Spherical Particle Shape Low Carbon Content Pozzolanic Reaction Fresh concrete : Increased : Mix stability Pumpability Placeability Reduced : Water Demand Bleeding Segregation Durability : Increased : Sulphate resistance Acid resistance Seawater resistance Reduced : Chloride Ingress ASR Risk Permeadbility Hard Concrete : Increased : Ultimate Strength Ultimate Stillness Pore Blocking Reduced : Creep Drying Shrinkage Thermal Strain Applications : Ready Mix Concrete Asbestos Products Manufacturing Cement Manufacturing Bricks & Blocks Manufacturing Builders & Contractors Precast Manufacturing Plaster & Masonary Works Land Fill & many more Concerete Application Advantages : Better Workability Reduces Permeability Reduces Heat of Hydration Improves Pumpability Improves Sulphate & Chloride Resistance Reduces Risk of Alkali Aggregate reaction Increase long term Strength Better concrete Finish Reudces Bleeding & Segregation Reduces Shrinkage Masonary Application Advantages : Reduces drying shrinkage cracks Good bonding, less rebound hence minimized wastage during plastering Better coverage area in plaster Excellent permeability resistance Improves labour productivity Smooth Finish Eco Friendly Cost Effective Additional Information: Production Capacity: 50000 Ton/MONTH Delivery Time: Immediately Packaging Details: As per customer DEMAND....
vacuum pump and compressor uses water as sealant,it can suction air,steam,gas that contains much water,and powder gas without granule. Pump casing material: cast iron Impeller material: alloy copper Seal: fluororubber mechanical seal Teflon coating disposal inside pump casing and pump cover Applications It's maily used in low/rough vacuum degree and big capacity area, such as vacuum drying, vacuum concentration, vacuum evaporation, vacuum degassing, vacuum distillation. So it's suitable for medical/pharmaceutical industry (autoclave sterilizer, capsule filling machine), chemical industry, textile industry, power plant, food-related industry, metallurgical industry, paper making industry etc. Advantages Comparing to similar products,our model owns a lot of superiority: 1. More than 30 years' experience in quality control and lead time,also we can provide competitve price. 2. Impeller is produced by our company,it's material is alloy copper to ensure firmness and reliability. 3. Inside pump cover,pump body and disc,it has anti-fouling Teflon coating disposal. 4. Use Viton mechanical seal to prevent corrosion so it can run smoothly under strict weather. 5. All motor has CE certificate and is made by our company to ensure power and quality. 6. Whole testing system controlled by micro-machine,all pumps pass testing before shipping.For each pump,we test for at least one hour,to test its power,capacity,vacuum degree,motor speed,current etc. 7. For quality problem,we guarantee to repair or replace within one year. Memo Lead time: around two weeks if quantity less than 50 units,if quantity more than 50 units,please confirm with us. Standard voltage: 380V,50HZ,3 phase (if special voltage is required, please let us know) We are in customized business, if special motor, material or color is needed, we can make it according to customer's requirements If you have any questions about pump details, shipping, price term or payment term
Compact Cash Drawer 13(W) x 13.7(D) x 3.54(H) inch 4Bills 5 Coin Removable Cash Tray & Coin Case Interface: Detachable RJ11 Solenoid unit with 24V Net Weight: 4.6kg 1pcs/carton as standard Gross Weight: 5.3kg 13 inch Point of Sale Custom Made Cash Drawer This is a 330mm/13inch Mini CASH Drawer for your pos system. It is of a square shape, Upper shell make of 0.8mm thick gauge cold rolled steel. To make sure cash drawer stronger and sturdy, We also welding the shell with ribs. The cash drawer bottom is with SGCC or SECC. The internal cash tray can be taken out, made of high-quality HIPS/ABS material, It is convenient for users to take it out when off work and safely count cash. At the same time, high-quality surface treatment, various colors and textures are available, All details are of high quality. This cash register drawer is our most popular Pos drawer. This item is a roller mini cash drawer, Popular model in pos market, So,it is wih heavy-duty ball bearing rollers. Based on it, the cash drawer can be easily ï¼?pulled out or pushed forward. And the internal actuator (locking mechanism) adopts the most reasonable design, which is very smooth and has high stability. This is also one of the most advanced designs in China, We have got the patents. Regarding Paint Process This cash drawer is textured hybrid powder coat. The standard color is Matte Black. We can also use other baking process and colors according to the needs. For example, bright black, Beige, bright white or other colors. Regarding Packing: Our Carton box is make of 5 layor hardboard(corrugated paper) And PE inner bag keep away from moisture and dust. Super thick EPE, full of elasticity, reduce and avoid bumps during logistics and express delivery (we avoid to use EPS,Whi is non-degradable, In fact, it has great environmental problems) Other imformation: we accept custom made requirement, such as logo, voltage, interface etc. Custom Made Clover/APG Cash Drawer Some advantages: Installed reinforced ribs, The ultra-sturdy structure has greater load-bearing capacity than the same type of cash box. In addition, there are stop add-ons inside the cash drawer, which greatly improves the safety of transportation.
Diacetyl Tartaric Acid Esters of Mono and Diglycerides Characters: Ivory or straw yellow powder or granular solid which is easily soluble in hot water. It is a non-ionic emulsifier with HLB value of 8-10. Applications: It can produce strong effects such as emulsification, dispersing and aging resistance, so it can be used as good emulsifier and dispersant. (1) It can increase the springiness, toughness and gas-holding capability of dough effectively, reduce its softening degree, increase volume of bread and steam bread, and improve their organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can be used in cream to make it smoother and finer. (4) It can be used in butter and concentrated butter to prevent oil separating and enhance its stability. (5) It can also be sued in sugar, syrup and spices. (6) It can be used in non-dairy creamer to make the emulsion homogeneous , stable and supple in mouth. Usage: (1) Put this product in warm water at about 60? to get paste shaped substance, and then use it in appropriate proportion. (2) Dissolve this product in oils or fats homogeneously before further processing. (3) Directly mix it with flour for use. Recommended Addition Amount: Addition maximum is 1.0% for raw dried flour products and raw wet products, while 5.0% for non-dairy creamers. The addition amount can be changed based on production need for cream and fermented milk. Technical Index (Conform to GB25539-2010 standard Acid value (Calculated by KOH) / (mg/g) 65-85 Saponification value (Calculated by KOH) / (mg/g) 390-450 Total tartaric acid(W/%) 10-40 Total glycerol(W/%) 11-28 Total acetic (W/%) 8-32 Free glycerol(W/%) 2.0 Ignition residue (W/%) 0.5 Pb/(mg/kg) 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5 KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
SL- 450 Front and Side View Sealinkers Clamps Each clamps has a product Identification Code for Material traceability, the name Sealinkers or SL, and a size forged into it. Entire Clamps are galvanized / Powder Coated to resist corrosive and rusting action. Only Genuine SL Clamps have a Yellow colour for instant recognition. All Clamps have rolled threads and extra heavy nuts. Rope Size Dimensions (mm) Min No. of Clamps Amt. of Rope to Turn Back in (cm)P (in.) (mm) A B C D E F G H 3/8 9-10 11.2 38.1 19.1 25.4 23.1 19.2 41.4 49.3 2 16.5 1/2 13 12.7 47.8 25.4 30.2 28.7 22.4 48.5 58.0 3 29.2 5/8 16 14.2 60.5 31.8 33.3 34.0 23.9 52.5 63.5 3 30.5 5/4 18-20 15.8 70.0 36.6 38.1 35.8 26.9 57.0 72.0 4 46 7/8 22 19.1 79.5 41.2 44.5 40.4 31.8 62.0 80.5 4 48 1 24-26 19.1 89.0 46.0 47.8 45.2 31.8 67.0 88.0 5 66 1 1/8 28-30 19.1 98.5 51.0 51.0 48.5 31.8 71.5 91.0 6 86 1 1/4 32-34 22.4 108 45.0 58.5 55.5 36.6 79.5 105 7 112 1 3/8 36 22.4 118 58.5 60.5 58.5 36.6 79.5 106 7 112 1 1/2 38-40 22.4 125 60.5 65.5 62.0 36.6 86.5 113 8 137 1 3/4 44-46 28.7 146 70.0 77.5 74.5 46.0 97.0 134 8 155 2 48-52 31.8 164 76.0 86.0 83.5 51.0 113 149 8 180 Note Refer to table I in following these instructions. Turn back specified amount of rope from thimble or loop. Apply first clip one base width from dead end of rope. Apply U-Bolt over dead end of wire rope - live end rests in saddle (Never Saddle a dead horse!).Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.
We offer the world best organic pepper from kampot, Cambodia. Weâ??ve got three main peppers 1. Black pepper 2. Red pepper 3. White pepper Black pepper Kampot black pepper delivers a strong and delicate aroma. Its taste, which can range from intensely spicy to mildly sweet, reveals hints of flower, eucalyptus and mint. This black pepper suits all kind of dishes and distinguishes itself in particular with grilled fish. Kampot peppersâ?? specificities come from the mildness of their spice, the freshness and complexity of their aromas and their exceptionnal lingering taste. Kampot pepper can be used in every day cooking, but excels when used in seafood cookery, it is also a "super food". Why not try something different? A Cambodian speciality is to make a dip from a combination of salt, palm sugar, Kampot pepper and lime. It couldnâ??t be simpler to put together, equal amounts of each and just a squeeze of lime Red pepper These unique red Kampot peppercorns produce a moderate heat that gradually builds in the mouth. Intense, flavourful and complex, these peppercorns pair beautifully with pasta, poultry, produce and pastries Harvested when the fruit is fully mature and has taken a red colour on the vine. The peppercorns are sun-dried for a few days and acquire a black colour with a deep maroon taint. This pungent pepper is very rare. Pepper is best purchased as whole peppercorns, as freshly ground pepper is vastly superior to the ready ground powder. Whole peppercorns retain their flavour indefinitely but quickly lose their aroma and heat after grinding. Peppercorns can be easily ground in a peppermill or pestle and mortar, and is best ground directly onto food. With hot food it is best to add pepper well towards the end of the cooking process, to preserve its aroma. Peppercorns are seasonal with harvesting taking place from February to May. White pepper Kampot red and white peppers are extremely rare due to the difficulty in harvesting fully mature pepper. Only a few hundreds of kilos are produced each year. Obtained by soaking the red berries in water for a few days, Kampot white pepper develops an intense bouquet and delicate aroma. Its strong spicy taste carries notes of fresh grass and lime.
Dried Red Chilli The tremendous growth, we have achieved across the world is owing to the exceptional quality Dry Red Chilli offered by us. The offered chilli is extensively used to add color, taste and aroma to several dishes. Our clients can also avail this product in varied packaging options to meet their diverse needs. To maintain its freshness and aroma for long, offered red chilli is packed using high quality packaging material. Offered Dry Red Chilli is available at industry leading prices. Features: â?¢ Pungent taste â?¢ Purity â?¢ Long shelf life â?¢ Freshness DRY RED CHILLI chilly is the universal spice of India. Chilly is nature's wonder. Its fruit appears in different sizes, shapes and colour The shape may be elongated or round and distal pointed, blunt or sucked in. Corrugated, leathery or smooth maybe the touch on outer skin.chilly has two important commercial qualities. If some varieties are famous for red colour because of the pigment capsanthin, others are known for biting pungency attributed by capsaicin. India is the only country rich in many varieties with different quality factors. chilly is an essential ingredient of curry. Curry is characterized by tempting colour and titillating pungency. Both are contributed by chilly. In curry, chilly is used as a paste, powder, broken split or whole form.Red chilis are very rich in vitamin C and provitamin A. In addition, they are a good source of most B vitamins, and vitamin B6 in particular. They are very high in potassium and high in magnesium and iron. Their high vitamin C content can also substantially increase the uptake of non-heme iron from other ingredients in a meal, such as beans and grains.Our CHILLI is sourced from GUNTUR. Technical Specifications : NAME OF THE PRODUCT DRY RED CHILLI COLOUR RED VARIETY BYADGI,SANNAM,TEJA,273 WRINKLE TYPE STEAM AND STEAMLESS PODS 8% MOISTURE 12%MAX FOREIGN MATTERS 2% DAMAGED 3%MAX LOOSE SEEDS 2%MAX LOADABLITY 1X20 FEET CONTAINER 5.5 TO 6.5 MT 1X40 FEET CONTAINER 12.5 TO 14 MT PAYMENT TERMS TT & 100% IRREVOCABLE LC AT SIGHT PACKING 5,10,20,25 KGS PP AND JUTE BAGS DELIVERY TIME 7 TO 10 DAYS MINIMUM ORDER QUANTITY 1x20FT CONTAINER(5.5 MT) UNIT PRICE PER TON
Aluminium Profile Bracket The aluminium profile bracket is extremely versatile and versatile. It is environmentally friendly, easy to assemble and disassemble, and saves time. It has many varieties and is suitable for various types of mechanical devices; it is easy to weld, easy to adjust, easy to change structure; strict dimensional tolerance requirements and high surface finish requirements; bracket aluminum profile assembly work is convenient and fast, high productivity; surface anodized, anti-proof Corrosion, spray-free, beautiful appearance, can increase product added value. Package reference: Product Description - 6063 Anodized aluminium profile bracket Model NO.: ZHL-8013 Shape: Customized Temper: T3-T8 Alloying Ingredient: 6063 Polished Aluminum Profile: Chemical Polishing Packaging Details: Export Sea Worthy Package Payment: T/T,L/C Type: Building profile, Transport Aluminium Profile Grade: 6000 Series Surface Finishing: anodized sliver Certification: CE, ISO, SGS Length: Coating 6.5 M Anodizing 6.5m or as Your Requested Delivery Detail: Within 30 Days After Receiving The Deposit Origin: Foshan Guangdong More details: Material 6063, 6061, 6082 etc. Temper T3, T4, T5, T6 Surface Anodize, electrophoresis, powder coating, PVDF coating, wood grain painting, Length Coating 6.5 meters, Anodizing 6.5 meters, Mill finish 12 meters Packing: Export sea worthy package Delivery: Within 30 days after receiving 30%T/T of deposit or L/C MOQ: 1MT Price terms: FOB, CFR, CIF Payment terms T/T, L/C Our advantage: 1) Small MOQ of aluminum profile 2) Customized marking, packaging, cutting, slitting, punching and other processing services. 3) Strong warehousing, one-stop logistics service. 4) Professional foreign trade team, door to door tracking service. Strict quality control for aluminum profile Large supply ability of aluminum profile FAQ Q: What is the MOQ? A: General MOQ is 500KGS per item. Bulk quantity make price more competitive. Q:Whether some samples can be provided? A: Yes, just need some sample cost, we will return it back when proceed into mass production. Q:Do you make customized products or finished parts? A: Yes,all parts are not in stock, custom made according to customer's drawings or samples! If you have any parts to be made, please feel free to send your kind drawings/samples to us. But stock is considered when customers requires. What about your products quality? Our factory is ISO9001:2008 certified,and our products mainly exported to Europe and North America.So the quality is certainly with high grade.
Introduction of Sodium Gluconate ---Production capacity: 150,000 tons/year Product Profile Product Name: Sodium gluconate Other Names: Gluconic acid sodium salt Gluconic Acid Sodium CAS No.: 527-07-1 Molecular Formula: C6H11NaO7 Molecular Weight: 218.14 Melting Point: 206-209 Appearance: White crystalline grain or powder Solubility: Easily soluble in water, slightly soluble in alcohol, cant soluble in diethyl ether Applications, Functions, Advantages 1. Food industry 1) Used as food additive 2) Sodium gluconate has nonirritant, no bitterness, tasted like salt, used for adjusting pH in food production, improving food flavor, replacing salt dosage in food 2. Construction industryconcrete retarder, water reducing agent 1) Sodium gluconate has good compatibility with the system composed of cement and water reducing agent 2) Sodium gluconate prolongs the initial setting time and the final setting time of concrete, enhanced the strength of concrete 3) Widely used in concrete admixture, suitable for pumpcrete, fluidity concrete, mass concrete, high-strength concrete 3. Petroleum chemical industryUsed as corrosion and scale inhibitor in circulating cooling water 1) It has obvious synergistic effect, enhance the effect of corrosion inhibitor. 2) The corrosion inhibition rate of sodium gluconate will increase with increasing temperature 3) Sodium gluconate has strong scale inhibition ability. It is a good scale inhibitor for calcium salt, magnesium salt, especially iron salt. 4) Pollution-free, this is the advantage that the corrosion inhibitor used at present cant compare with. It is one of the cheapest organic synthetic chemical which is widely used as corrosion and scale inhibitor. 4. Glass detergent 1) Strong descaling capacity, not plug the nozzle and pipe of the bottle washer 2) Effectively remove bottle label and rust of bottle neck 3) Discharge of washing water conforms to national standard 5. Steel surface detergent 1) After strict cleaning steel surface with detergent which contains sodium gluconate, the coating materials will be more firmly bonded to the steel surface 2) Good anti-scale ability and anti-rust ability 3) In electroplated metal surface cleaning, it can prevent iron, aluminum and other precipitation of hydroxide in solution
