It is used for checking tensile strength of the central heart of lift cables.A sample of the completed cable, 1 m long, shall be weighted. After removal of all covering and cores over a distance of about 0.20 m at both ends of the sample, the central heart including the strain-bearing centre shall be subjected to a tensile force, corresponding to the mass of 300 m of cable. The force shall be applied for 1 min. Parameters(mm): Maximum test force 2000N Test force display range 0~500kg Grading test force No grading of the whole process, the entire resolution unchanged Test force measurement accuracy Is superior to ±1% of the display value Displacement resolution 0.01mm Accuracy of displacement measurement Is superior to ±1% of the display value Moving speed range of cross beam 25mm/min~500mm/min Stepless speed regulation, can set speed arbitrarily The control precision of the displacement speed Is superior to ±1% of the display value Tensile space 0~1000mm Dimension 500mm×500mm×1600mm, weight:100kg Power supply 220V?50Hz?1000W
It is used for the testing of IPX7, it also provide water and electrical automatic control for IPX1~6` waterproofing test. Parameters: 1. Suitable for IPX1-6 water proof and UL dripping water?IPX7 water immersion test and automatic control of the whole waterproof test system; 2. Water supply method: constant temperature water supply, constant flow water supply, constant pressure water supply. 3. Water supply control process: After user preset the water flow value and water pressure value on the touch screen, electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter. 4. There are large flow and small flow two ways water supply. 5. Large flow water supply: (a) It is applicable to IPX5~IPX6 strong water spray test and water injection of IPX8 (b) Flow range: 10~100L/min (c) Flow accuracy: ±0.5L/min (d) Flowmeter: Turbine flowmeter (e) Water pump: Stainless steel centrifugal pump 6. Small flow water supply: (a)It is applicable to IPX1,IPX2,IPX3,IPX4 and UL waterproof test (b)Flow range: 1~10L/min (c)Flow accuracy: ±0.5L/min Flowmeter: Turbine flowmeter (d)Water pump: Stainless steel centrifugal pump (e)Pressure range: 0.1-3Kg/cm²; (f)Pressure digital display: Adopt digital pressure gauge; 7. Water storage tank: (a)It is applicable to water storage of IPX5~IPX6 strong water spray test,water injection of IPX8, IPX7 immersion (b)Volume: 500L (c)Dimension: L600mmXW660mmXH1400mm (d)Observation window: toughened glass window (e)Observation window dimension: W200mmXH1250mm (f)Depth gauge: stainless steel (g)Depth gauge height: 1300mm, accuracy 1mm (h)Liquid level control: float switch + overflow pipe 8. Control Cabinet: (a)Flow detection: flow signal feedback through electronic flowmeter (b)Flow setting: set on touch screen (c)Temperature detection: PID (d)Controller: Mitsubishi PLC (e)Friendly interface: 7 inch, color touch screen (f)Control function: constant flow water supply, constant pressure water supply,vertical drop rain motion control, oscillating tube rain motion control, rotation table motion control and test time control. (g)Protection function: leakage protection, overload protection, short circuit protection. 9. Water supply pipeline: water supply of this equipment using PVC hose, it is assigned to each device according to the site layout , and controlled by the electromagnetic water valve. 10. Install the drainage valve on the water supply pipeline, it will automatic discharge the water after the test is completed 11. Filter: stainless steel shell, fine filter element. 12. Machine body material: aluminum alloy profile. 13. Appearance size(WXDXH):1400X750X1600mm;
?equipment model and name Csl-y impact specimen gap hydraulic broaching machine ? equipment usage Impact specimen notch broaching machine is the dedicated and affiliated equipment with metallic pendulum impact testing machine, the machine adopts hydraulic drive, electric control the rise and fall of broach, broach lifting speed can be adjusted, adopting the lubricating oil to lubricate blade mouth parts at the same time, to ensure the sample accords with a requirement gap size and surface finish.The machine due to the use of a forming principle, the machining gap of good identity. Broach manufactured high-quality high-speed w18cr4v steel alloy, and its high hardness, good wear resistance, long service life, per knife can be processed more than 20000 samples. ? applicable standard Gb/t229-2007« metal material charpy pendulum impact test method»; Astm e23-02a«metal material gap specimen standard impact test method»; Iso148-2008«metallic materials-charpy pendulum impact test»; Din 50 115-1991«metal material impact test special sample size and fracture judge» Iv main technical parameters Sample notch type U type(u2, u3, u5), v type(v2) Processing sample size 10×10(7.5 or 5)×55mm Broach hardness =hrc65 Installed broach quantity 2 Cutting speed 2.5m/min ( can adjust) System pressure 2.5mpa Hysraulic oil storage 25l Broach stroke 340mm(u2, v2), 390mm(u5) Broach materials W18cv4v Motor power 370w Dimensions 480mm×660mm×1200mm (l×w×h) Weight 200kg V standard configuration 1.Host one 2.V2 broach one 3.U2 broach one Vi optional accessories 1. U3 broach 2. U5 broach
•Dual level LCD display •Automatic temperature compensation •Replaceable pH electrodes The KL-081 is a 2 in 1 tester that measures pH as well as temperature reading in water. This is especially convenient where pH and temperature readings are needed. Now you do not need to buy another thermometer and you also save time between test. The automatic endpoint reading mean that technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time.
Easy-to-read Custom Dual-level LCD •On-the-spot measurement •Automatic Temperature Compensation •Tactile grip casings It uses combined pH electrode of high sensitivity, fast response, and good repetition as probe. With large liquid crystal digits display, the meter is reliable, stable, portable, and convenient to operate, especially for field measuring. It is praised by home and aboard. This product has been exported in batches. It is applicable to determine pH value of water solution in departments of medical treatment, environment protection, scientific research, college, swimming pool and mechanical plant etc.
•Dual level LCD display •Automatic temperature compensation •Replaceable pH electrodes The KL-081 is a 2 in 1 tester that measures pH as well as temperature reading in water. This is especially convenient where pH and temperature readings are needed. Now you do not need to buy another thermometer and you also save time between test. The automatic endpoint reading mean that technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time.
Scope of application For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F). Benefits - Conforms to ASTM D92 and related specifications - For flash points above 79 C (175F) Function characteristics 1,english operating software prompts; 2, with the experimental date, test time parameter prompts; 3, automatic correction of atmospheric pressure and calculated correction values; 4 differential detection, automatic correction system deviation; 5, scan, ignition, detection, print test data computer is done automatically; 6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel; standard wooden case
Products information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to the standard and related requirement of ul94, iec60695-11-2, iec60695-11-3, iec60695-11-4, iec60695-11-20. It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. 1250mm*650mm*300mm, 160kg
It is suitable for all types of portable lamps and similar electrical appliances products for mechanical stability test, the test sample is placed on countertops, to assess its mechanical stability through different tilt angles. Working condition: Environment:0¡æ¡«+40¡æ;Working power supply:220V¡¨¤10%,50Hz Technical index: 1.Tilt angle:0-30¡ãstepless adjustable,electric control,encoders intelligent digital display; equipped with angle measuring instrument calibration, easy to operate, high accuracy angle,precision ¡¨¤ 0.5 ¡ã. 2.The maximum weight load:50kg,(load can be improved as per customer requirements)steel plate surface is treated by painting; 3.Motor speed: 0.50r/min (frequency control for optional),there are reliable earthing contact and power plug connector on the test bench of accessible metal surface; 4.Table diameter:800mm; 5.The test bench with stable whole structure,and beautiful appearance. Table diameter:800mm
The plugs are subjected to a compression test at the apparatus, the temperature of the pressure plate, of the base and of the specimens being (23 2) c and the force applied being 300 n. Plywood 60kg 400mmx300mmx600mm
sion test of gb18285-2005 & hj/t289-2006. Chinese or english menu for easy operation Lcd screen Automatic zero resetting High-brightness digital display, automatic linear data process Automatic calculation and display of air-fuel ratio |Ë Equipped with rotation speed and oil temperature measure ports 460mm*240mm*230mm Net weight: 8.5kg Package dimension: Carton:595mm*310mm*345mm
Genenal information Ac/dc hipot testing is the effective and direct way to test insulation strength for electric equipments.It check dangerous flaws and make sure electric equipment continuous working.It typically used to test insulation strength for all kinds of electrical equipments, components like capacitors, insulation materials.Our hipot tester also used for ac, dc, ac/dc hipot testing. Wooden case
Iec60335 temperature black test corner To measure the temperatures in the base or in the fixing surfaces for applicances and luminaires in operation according to iec60335-1/2006-09 clause 11.2 and 11.3. Can be used to the temperature test of all kinds of electronic products supply, in conformity with the standards requirement of the environmental conditions. Advantages Test corner boards are "stand alone basic" and could be easily combined into a test corner by using some track. Packed with strong wooden case
* HV power filter (also Capacitive Voltage Divider) * Exciter transformer * Voltage regulator * Control and Measuring System (manual operation or computer-aided automatic systems)
The Venus Relay Protection Tester is developed using advanced DSP (Digital Signal Processor) and switching amplifier technologies, which can test electromagnetic, transistor, integrated circuit and microprocessor relay protection equipments. VENUS Relay Protection Test Software is an automatic testing management platform for protection device. The highly efficient system consisted of VENUS and the software can meet the requirements for the research institutions and manufacturers in the power system of the world. ò4/6 AC or DC Voltage Sources ò3/6 AC or DC Current Sources ò0-250V Independent DC Voltage Source ò¦10V Voltage Transducer Measurement Unit ò¦20mA Current Transducer Measurement Unit òInternal GPS Synchronization Unit òRJ-45 Ethernet Interface for Communication
The venus relay protection tester is developed using advanced dsp (digital signal processor) and switching amplifier technologies, which can test electromagnetic, transistor, integrated circuit and microprocessor relay protection equipments. Venus relay protection test software is an automatic testing management platform for protection device. The highly efficient system consisted of venus and the software can meet the requirements for the research institutions and manufacturers in the power system of the world. 4/6 ac or dc voltage sources 3/6 ac or dc current sources 0-250v independent dc voltage source Measurement for kwh and transducer Internal and external gps synchronization Ethernet interface(rj45) for communication 4 binary output, 8 binary input Powerful test system, rich function, cost effective Calibrate all kinds of protection devices. Measurement for transducers and kwh meters. Easy to operate. - all interfaces are on the panels of the device. - tester can stand or lies according to userí»s needs Light weight, and portable. Small power consumption, good heat dissipation
This is the most advanced automatic version of the c&df sets within our product range. The automatic 12kv 200ma test set integrates the high voltage power source and the measuring bridge into one single compact unit. It is designed to measure dissipation factor and capacitance in heavy electromagnetic interference environment such as in power plants and substations. Using digital filters it eliminates interference signal to specimen signal by a ratio as high as 2:1. It can also be used in laboratory for high accuracy tests on high voltage bushings, transformer windings, shunt reactors, current transformer, capacitor voltage transformer (cvt), grading capacitors of circuit breakers, surge arrestors and generator windings. Dissipation factor range v no limit Df resolution v 0.001% (1 x 10-5) Df accuracy v 1% + 4 digits Capacitance range v 3pf to 50000pf @ 12kv 60pf to 1uf @ 0.5kv Capacitance range accuracy v 1% + 1 digit Test voltage range v 0.5kv to 12kv, 200ma(max) Test voltage resolution v 1v Test voltage accuracy v 1% + 10 digits Input current range v 10ua to 5a Test time v 30s typical Cvt test mode v o/p voltage 3 to 50v, o/p current 3 to 30a Internal hv frequency v 45, 50, 55, 60, 65 hz (single) 45/55hz, 55/65hz (auto multiple frequency measure & avg for interference suppression) Input supply v 1-phase 220v 50hz, +/- 10% (flat pin type, type g electrical plug) Printer v thermal printer Communication port v rs-232. Moq - 1 pc Weight - 35 kgs Dimensions - 45cms x 35cms x 35cms.
Common Rail System Tester CRS-1000 simulates an engine ECU, to drive a solenoid on CR pump, such as Bosch CP1/CP2/CP3, Delphi CRSP and Denso HP2/HP3, and solenoids of 6 CR injectors. A standard high pressure pump test bench with a CR system tester CRS-1000 will fulfill most tasks for repairing a CR system and the components, such as injection quantities, injector fuel return, nozzle injection spray atomization, pump condition and fuel rail pressure control. Design Features Combine two independent modules for pump and injector control Pump driving signal - Adjustable duty cycleíAwhile monitoring fuel rail pressure Injector driving signal - Adjustable frequency and pulse width Modulated driving signal to ensure the safety of the solenoids of the injectors Software based over-pressure protection Short circuit protection for solenoid driving signals Rich accessories, ready to test Bosch, Denso and Delphi injectors and pumps 50*43*30cm
PH-903 Pen pH Tester WR PH-903 Pen pH Tester WR (New) Range: 0.00-f-¼14.00 pH, Resolution: 0.01 pH, Accuracy: -f+ú-f+¦0.03pH, Temp. C: 5-f-¼50-f+¬, (ATC) Calibration: Two-point at 6.86pH and 4.01pH (or 7.0pH and 4.01pH) Features: Automatic switch-off function: After 10 minutes without pushing buttons, the meter will be switched off automatically. Low battery: As long as there is any display, the accuracy is guaranteed. Battery Life: DC 4x 1.5V Flug: Fixed electrode 0
Eltek Flatpack2 Rectifier Module 110V 2000W HE WOR 241119.805 Overview High efficiency and reliable rectifiers The most efficient power conversion module in the industry! Since the launch the Flatpack 2 family has expanded into a wide selection of power ratings and voltages Key Feature Proven Reliability High Power Density Application Flexibility, 2kw - 2m Accepts Dc Input (Dc/ Dc Converter) Global Compliance (Ce, Ul, Nebs) Marine & Offshore Certification Patented Technology Digital Controllers Applications Power Utilities Switch Tripping Control & Protection Systems Emergency Lighting Railway Infrastructure Converter Stations Power Stations Various other applications in demanding industries like marine, oil & gas, process etc. Specifications Part number 241119.805 Model 110-120 / 20A HE INPUT DATA Voltage range (nominal) 176 - 277 V AC 1) Voltage range 85 - 305 V A 1) C Frequency 45 - 66 Hz Maximum current 18.64 ARMS Power Factor 0.99 (@ 50-100 % load) THD (@ 230 VAC) < 4 % (@ full load) Protection Varistor for transient protection, fuse in both lines, shutdown above 300/ 305 V OUTPUT DATA Default voltage 122.5 V DC Voltage range 90.02) - 151.25 V D 1) C # Pb cell supported (1.8 - 2.4 V DC/ cell) 54 -60 # NiCad cell supported (1.05 - 1.65 V DC/ cell) 86 - 91 Max power, nominal input 3025 W1) Max power, 85V input 1280 W Max current 20 A Hold-up time, default voltage and 1500 W load 10 ms, VOUT > 99.7 VDC Current sharing �±5% of maximum current from 10 to 100% load Static voltage regulation �±0.5% from 10% to 100% load and nominal input Dynamic voltage regulation �±5.0% for 10-80% or 80-10% load variation, regulation time < 50ms Rippel and noise, 30 MHz bandwidth < 500 mV PP Protection Overvoltage shutdown, short circuit proof, high temperature, hot plug -in inrush current limiting, ORing diode