The plugs are subjected to a compression test at the apparatus, the temperature of the pressure plate, of the base and of the specimens being (23 2) c and the force applied being 300 n.
Plywood
60kg
400mmx300mmx600mm
The special explosion-proof cable is composed of conductor, insulation, high-strength braided explosion-proof reinforcement layer, explosion-proof armor layer and antistatic outer sheath. According to the different needs of customers, the insulation layer is divided into inorganic mineral insulation, rubber insulation and plastic insulation. Under the protection of the explosion-proof reinforced layer and explosion-proof armor, the special explosion-proof cable can withstand the destructive force of 55 kg of TNT explosives within a certain distance. At the same time, the anti-static outer sheath can effectively guide the static electricity generated by the friction between the cable and the non-insulator, prevent the fire, explosion and other safety accidents caused by static electricity in military facilities, and perfectly solve the technical problem that the "cable static bundle" is easy to detonate. The special explosion-proof cable also solves the current national defense combat readiness facilities, such as ammunition depots, hangars, military ports, caverns, military and civilian airports, tunnels, military exercise bases, large-scale power, chemical, coal, subway hazardous chemical wharf and other electrical equipment facilities Safety issues of explosion-proof system or unit power transmission. Inorganic mineral insulated explosion-proof cables also have: low-smoke, halogen-free, flame-retardant, low-toxicity, fire-proof and other combustion characteristics, and have passed the most demanding C, W, Z and BS8491 fire tests in the British BS6387. At the same time, the cable has good flexibility, Features such as strong compression resistance and long manufacturing length. Special explosion-proof cable is suitable for ammunition depots, hangars, military ports, caverns, military and civil airports, tunnels, military exercise bases, large electric power, chemical, coal mine, subway dangerous wharves
SCR Electroniks make, Shutter Socket Test Apparatus is designed to carry out Socket Shutter Test¦. The apparatus is designed & manufactured exactly as per the IEC & IS Specifications Test Apparatus consists of following parts : 1) Motor to achieve 20 cycles / minutes speed D.C. Motor of suitable is used. 2) Mechanical Assembly : Consists of following parts : Test Plate & Test Plate Mounting Block : On Test Plate socket under test is mounted. Test Plate is in turn mounted on two Mounting Plates with provision for lateral position adjustment. to take care pf different thickness sockets. Provision is made for adjustment along X axis & Y axis, so that µTest Plug Pins¦ engage exactly in to the holes on the µSocket Under Test¦. This is stationary during test. Test Plug with mounting arrangement (moving) : Test Plug is made as per Cl. No. 24.10 fig. No. 25 and mounted on moving block. Movement Transfer Arrangement : Consists of (a) Circular Disc, with offset link (b) Lateral Link, connection between offset link and µTest Plug Moving Block¦. Control Unit. Electronic control unit is with following Controls & Indications. Name Type Function Power ON Switch Rocker Switch (Teknic) Puts the Apparatus ON / OFF. Power ON Indicator Neon v Built v In Indicates Power ON / OFF Counter + Reset Button 6 digit Gujral Make Counts no of cycles. Hold Time Set v 2 digit. Thumb Wheel Switch To set hold time between (1-99 sec). Micro Switch is provided to sense µLimit Position¦ of moving block in forward direction, which triggers the µHold Time Counter¦. After preset time µHold Time Counter¦ resets, and motor starts to actuate backward movement of moving block. Battery Backup : In case mains power goes off, in course of testing, the count is retained, and when mains power resumes the dimmer under test is restored to Off position i.e. Home Position, without this incomplete operation getting counted, and then operation starts normally. To reset count to Zero : Put On the µPower ON Switch¦, while µReset Button is being pushed.
Products information: The series of horizontal-vertical flame test apparatus are designed and manufactured according to the standard and related requirement of ul94, iec60695-11-2, iec60695-11-3, iec60695-11-4, iec60695-11-20. It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. 1250mm*650mm*300mm, 160kg
Supplier: Rockwell, brinell, vickers hardness testers, universal testing machines, impact testing machines, fatigue testing machine, compression testing machine
Buyer: Bajaj, bharat forge, tata steel, venus wires, ador welding, l&t, godrej & boyce, kirloskar, pwd department, saroj, mayura steels
Supplier: Soil testing equipment, concret testing equipment, bitumen testing equipment, aggregate testing equipment , rock testing equipment , water testing equipment , cement testing equipment , civil laboratory equipments, construction material qc lab equipment , mechanical engineering laboratory equipments , material testing equipments , thermal laboratory equipment , metrology laboratory equipments, metallurgy equipments, fluid mechanics lab equipments , automobile engineering lab equipments , road highways testing equipments, soil mechanis lab equipments, heat trasfer lab equipments, fuel testing equipment , refrigeration laboratory equipment , digital meter, survey instruments, milling machine, grinding machine, auto level instruments, laboratory apparatus, compression tester, cube testing machine, slump cone, cube mould, rapid moisture meter, sand pouring cylinder, field density apparatus, weighing balance, core cutter, auto level total station, theodolite, slump cone, silver mercury,
1) Round type ABS compression sealed case with cap 2) Quick connects combined with cable termination 3) Moisture resistance, high strength, insulation and vibration 4) Applicable to 50 / 60Hz Single Phase AC motors 5) Lowing prices and best quality for long life 6) Bleeder resistor and bracket are available if required 7) Rated frequency: 50 / 60Hz 8) Rated voltage: 275 / 320V AC 9) Rated capacitance: 40 - 200MFD 10) Capacitance tolerance: 0 / +20% 11) Temperature Range: -20 / +55oC 12) Dissipation factor: f_;0.10 13) Testing voltage: T-T 1.2Ur 2s,T-C 2,000V AC 10s 14) Standard: IEC252