Black PVC Foam Board with aluminum skins is available in sizes of 5mm, 10mm, 16mm, and 18mm thickness. It is commonly used as door core, wall panel, and decorative panel.
PVC Foam Board with aluminum skins Thicknesses : 4/10/16/18/20mm Size : 1.22m*2.44m These panels are durable, impact-resistant, and wear-resistant, suitable for door panels and wall protection panels.
laser welded aluminum plate Width 250-650 length 6 meters Can do door frame kit Can do cabinet door core Can be used as wall panel cabinet backboard
Nano crystallized glass white is pure white slabs with consistent white and invisible crystal spots. Suitable for walls,floors,kitchen tops and countertops. Various size and thickness all available here like 3000x1800;2800x1600x18mm/10/12mm
Graded washed sands for adhesive mixture. Precast mixture Facades fabrication Fine graded sands for tile grout mixture. Sands properly graded for roof water proofing and wall plastering
The main body is made of first class MDF material that is easy to clean and does not hold bacteria. The scratching area is made of natural sisal material. Contains catnip. There are anti-slip silicones on the bottom. Body length range is 35-37cm. If you wish, you can attach it to walls, cabinet doors, etc. with double-sided tape without having to drill your wall. You can mount it anywhere. 12 different color and model options are available.
Modern climbing formwork systems consist of large wall forms mounted on climbing scaffolds. As part of the first concrete pour, the climbing supports are attached to pre-set anchor bolts. This ensures the transfer of wind and constant loads from the wall formwork and supports. The formwork also used two climbing brackets to create a working platform to align and support the panels. After pouring the concrete, the lifting boots and screws were installed. Both the climbing platform and the formwork were then lifted to a new suspension point for the next pouring cycle.
This beautiful travertine stone has a distinctive, unique appearance. Widely used for both floor and wall coverings, Travertine's matte surface creates a beautiful texture that's hard to miss. To the plain eye, this stone has a calming nature. Widely used in bathrooms, wall coverings, countertops, showers, flooring and many other design projects, Travertine's rustic look and durable formation make it a timeless addition to any home.
"A-1: 800W Balcony Angle - 1. 2pcs * 425W Black Solar Panel 2. 800W Micro inverter 3. Balcony Bracket ï¼? Aluminum Adjustable Angle 0�°-30�°ï¼? 4. 2 * DC Cable 5. 5m AC Cable "A-2: 800W Ground & Wall Angle - 1. 2pcs * 425W Black Solar Panel 2. 800W Micro inverter 3. Ground & Wall Bracket 4. 2 * DC Cable 5. 5m AC Cable"
Cuisinart DGB-700 Grind & Brew AutoCuisinart DGB-700 Grind & Brew Auto Product Description Essential Info: Ready to start your day without a fuss? A whole half-pound of beans fits into this sealable bean hopper, so forget about storing your coffee in the freezer. With a grinder built in to the machine, the Cuisinart Grind & Brew 12-Cup Automatic Coffee maker is great for coffee lovers with limited counter space, or those who just donâ??t feel like buying another appliance for a daily cup of morning coffee. Itâ??s fully programmable and made of stainless steel, designed to be both sophisticated and durable. Controls: Cuisinart identifies each button by its name written in black under it, such as Strength Control and Grind Off. You can use the control panel to program the clock, control the coffee strength (mild, medium, or strong), grind beans for up to 12 cups of coffee, and auto-start the coffeemaker up to 24 hours in advance. There is also an auto-shutoff, so you can program your machine to automatically turn off up to 4 hours after its last use.
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types. Highlight 3R signal regeneration Re-transmission Re-shaping Re-timing Multi-rate supports 1Gbps ~ 10Gbps Supports Loopback Test Supports ALS Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10Gbps CPRI: 2/3/4/5/6/7 1G/10G Ethernet SDH STM-4/16/64 The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
Product Description: The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files). You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar; see these instructions for details. Speed(MHz) 16MHZ Core Size (Number of Bits) 8 Bit RAM Size 2KBYTE ROM Type EEPROM Flash Number of Pins 28 Other Detail: Microcontroller ATmega328P Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz LED_BUILTIN 13
Product Description: The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files). You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar; see these instructions for details. Speed(MHz) 16MHZ Core Size (Number of Bits) 8 Bit RAM Size 2KBYTE ROM Type EEPROM Flash Number of Pins 28 Other Detail: Microcontroller ATmega328P Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz LED_BUILTIN 13
Product Description The CoffeeTEAM Pro Plus with Thermal Carafe is a grind and brew coffee maker the grinds beans fresh for every pot you brew. Redesigned by Capresso with an updated grinder, the CoffeeTEAM Pro Plus can be programmed for automatic brewing of up to 10-Cups of coffee. The conical steel burr grinder features an automatic cleaning function with an easy-to-remove top burr. The coffee maker also features a new "oily bean" function that adjusts grinding time to accommodate for extra dark roasts. Dimensions: 12.5" D x 8.25" W x 16.5" H Weight: 14lbs 1-Year Limited Warranty for Household Use. Programmable Brewing and LCD Display Enjoy your coffee at the same time every morning thanks to the 24 hour programmable clock/timer and Auto-On function. The AM/PM clock allows you to specify when you want the CoffeeTEAM to grind and brew your coffee. The easy to read LCD display makes programming the coffee maker a breeze as you navigate the menu settings to dial in your preferred settings. You can manually select to brew between 2, 4, 6, 8, and 10 cups of coffee at a time. The grinder will automatically adjust the time to grind the proper amount of coffee for the number of cups selected; you can also program the Auto-On feature with the same specifications. Can't wait for that first pot? The drip stop function allows you to pause the brew cycle so you can pour yourself a cup of coffee. To conserve energy, the coffee maker will power off automatically after use. Stainless Steel Conical Burr Grinder Your coffee is ground fresh for every pot you brew by a set of stainless steel conical burrs. The slow grinding of the burrs imparts minimal heat to preserve more aroma and flavor. The accommodate for varying roast profiles, the CoffeeTEAM Pro Plus features three grind settings that range from coarse to fine. The two-step grind and clean chamber automatically cleans the grinder after each brew cycle to extend the longevity of your coffee maker. To further assist with cleaning, the upper burr can removed for easy access to the lower burr and each coffee maker ships with a angled grinder cleaning brush. Oily Bean Function To accommodate for extra dark and oily roasts, the grinder features a special Oily Bean function that slows grinding time to account for slower feeding of the grounds. The bean hopper is also fitted with a low-friction, ribbed surface to further assist with grinding oilier coffees.
We ultimately choose the Acousound Suspended Acoustic Panels as our product. These panels come in forty different colors and can be produced in any shape or size. This is the ideal solution because it allows the architects to use modern shapes in their design and provides them with the best kind of sound absorber, a Class A. Advantage of 1200x1200x24mm Charcoal Square Pet Panel Ceiling Baffle RECYCLED PET 12/24 mm PET felt. Made from 60% recycled PET. No formaldehyde binders. Low VOCs. Created in-house delivering fast lead times and complete creative control. PROVIDES VISUAL INTEREST Bespoke panels can be created from your designs. Provides visual interest to ceilings. Not affected by moisture, mould or mildew. Easily retro-fitted to ceilings.
Acoustic materials and acoustic control products are specially designed to reduce the transmission of sound or noise in a given space. Custom acoustic products can be used in various applications, such as creating soundproof walls, reducing echo or reverberation in a music studio, or improving speech intelligibility in a conference room. There are various types of acoustic materials and products available, including acoustic panels, diffusers, bass traps, acoustic foam, and soundproof curtains. These architectural acoustic products and materials are manufactured with advanced technologies and have unique characteristics, such as high sound absorption, durability and aesthetic appeal. Acoustic materials and custom acoustical products can improve the overall comfort and efficiency of a given space by reducing unwanted noise and enhancing sound quality.
MOTOR SPEED: 360 RPM POWER CONSUMPTION: 50 W FAN SWEEP SIZE: 1200MM AIR DELIVERY: 220 MM SERVICE VALUE: 4.4 WINDING MATERIAL: 100% COPPER BLADE AND COVER MATERIAL: ALUMINIUM/ METAL STAR RATING: 1 DOUBLE BALL BEARING FOR LONGER LIFE
MOTOR SPEED: 350 RPM POWER CONSUMPTION: 32 W FAN SWEEP SIZE: 1200MM AIR DELIVERY: 220 MM SERVICE VALUE: 6.87 THD:
Specifications: 850 Watts Double Insulated 4 Angle Grinder Best Use In Wall Chasing Weld Dressing & Cutting In Fabrication Segment Model 45100 Capacity 100 16 5 Mm Watts Input (full Load) 850 Watts No Load Speed 11000 / Min Approx Net Weight 1.6 Kg.
Krishna Industries is a leading acrylic toothbrush holder manufacturer and supplier based in Rajkot, India. We provide wall mounted self-adhesive acrylic toothbrush stand or tumbler for bathroom accessories, made from high grade acrylic sheet with stainless steel rails.